9
0
Fork 0
barebox/arch/arm/dts/imx27-phytec-phycard-s-som.dts

103 lines
1.7 KiB
Plaintext

/*
* Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
* and Markus Pargmann, Pengutronix
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx27.dtsi"
/ {
model = "Phytec pca100";
compatible = "phytec,imx27-pca100", "fsl,imx27";
chosen {
linux,stdout-path = &uart1;
environment@0 {
compatible = "barebox,environment";
device-path = &nfc, "partname:environment";
};
};
memory {
reg = <0xa0000000 0x08000000>; /* 128MB */
};
};
&cspi1 {
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
<&gpio4 27 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&iomuxc {
imx27-phycard-s-som {
pinctrl_fec1: fec1grp {
fsl,pins = <MX27_FEC1_PINGRP1>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <MX27_I2C2_PINGRP1>;
};
pinctrl_nfc: nfcgrp {
fsl,pins = <MX27_NFC_PINGRP1>;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
at24@52 {
compatible = "at,24c32";
pagesize = <32>;
reg = <0x52>;
};
};
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nfc>;
nand-bus-width = <8>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
status = "okay";
partition@0 {
label = "boot";
reg = <0x0 0x80000>;
};
partition@1 {
label = "environment";
reg = <0x80000 0x80000>;
};
partition@2 {
label = "kernel";
reg = <0x100000 0x400000>;
};
partition@3 {
label = "root";
reg = <0x500000 0x7b00000>;
};
};