b9672eb87d
With this patch the barebox_update command will be extended by the possibility to flash the MLO to eMMC devices. The MLO will be flashed to the following addresses: 0x00000 0x20000 0x40000 0x60000 Because the first 512 Bytes of the MLO are reserved for the CHSETTINGS header and this only use ~80 Bytes, there is space for the partition table in the header. The command will overwrite the bootstrap code area and will hold the partition table and the Boot signature. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
40 lines
1.7 KiB
Makefile
40 lines
1.7 KiB
Makefile
# OMAP Architecture Makefile
|
|
#
|
|
# (C) Copyright 2008
|
|
# Texas Instruments, <www.ti.com>
|
|
# Nishanth Menon <x0nishan@ti.com>
|
|
#
|
|
# This program is free software; you can redistribute it and/or
|
|
# modify it under the terms of the GNU General Public License as
|
|
# published by the Free Software Foundation; either version 2 of
|
|
# the License, or (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
#
|
|
obj-$(CONFIG_ARCH_OMAP) += syslib.o omap_devices.o omap_generic.o omap_fb.o
|
|
pbl-$(CONFIG_ARCH_OMAP) += syslib.o
|
|
obj-$(CONFIG_OMAP_CLOCK_SOURCE_S32K) += s32k_clksource.o
|
|
obj-$(CONFIG_OMAP_CLOCK_SOURCE_DMTIMER) += dmtimer.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap3_generic.o auxcr.o
|
|
pbl-$(CONFIG_ARCH_OMAP3) += omap3_generic.o auxcr.o
|
|
obj-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o
|
|
pbl-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o
|
|
obj-pbl-$(CONFIG_ARCH_AM33XX) += am33xx_generic.o am33xx_clock.o am33xx_mux.o
|
|
obj-$(CONFIG_ARCH_AM33XX) += am33xx_scrm.o
|
|
obj-$(CONFIG_ARCH_OMAP3) += omap3_clock.o
|
|
pbl-$(CONFIG_ARCH_OMAP3) += omap3_clock.o
|
|
obj-$(CONFIG_OMAP_GPMC) += gpmc.o devices-gpmc-nand.o
|
|
obj-$(CONFIG_SHELL_NONE) += xload.o
|
|
obj-$(CONFIG_MFD_TWL6030) += omap4_twl6030_mmc.o
|
|
obj-$(CONFIG_OMAP4_USBBOOT) += omap4_rom_usb.o
|
|
obj-$(CONFIG_OMAP3_USBBOOT) += omap3_xload_usb.o
|
|
pbl-$(CONFIG_OMAP3_USBBOOT) += omap3_xload_usb.o
|
|
obj-$(CONFIG_CMD_BOOT_ORDER) += boot_order.o
|
|
obj-$(CONFIG_BAREBOX_UPDATE_AM33XX_SPI_NOR_MLO) += am33xx_bbu_spi_mlo.o
|
|
obj-$(CONFIG_BAREBOX_UPDATE_AM33XX_NAND) += am33xx_bbu_nand.o
|
|
obj-$(CONFIG_BAREBOX_UPDATE_AM33XX_EMMC) += am33xx_bbu_emmc.o
|