Signed-off-by: Alexey Galakhov <agalakhov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
321 lines
8.6 KiB
C
321 lines
8.6 KiB
C
/*
|
|
* Copyright (C) 2012 Alexey Galakhov
|
|
*
|
|
* Based on code from u-boot found somewhere on the web
|
|
* that seems to originate from Samsung
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <io.h>
|
|
#include <init.h>
|
|
#include <mach/s3c-generic.h>
|
|
#include <mach/s3c-iomap.h>
|
|
|
|
#define S5P_DMC_CONCONTROL 0x00
|
|
#define S5P_DMC_MEMCONTROL 0x04
|
|
#define S5P_DMC_MEMCONFIG0 0x08
|
|
#define S5P_DMC_MEMCONFIG1 0x0C
|
|
#define S5P_DMC_DIRECTCMD 0x10
|
|
#define S5P_DMC_PRECHCONFIG 0x14
|
|
#define S5P_DMC_PHYCONTROL0 0x18
|
|
#define S5P_DMC_PHYCONTROL1 0x1C
|
|
#define S5P_DMC_PWRDNCONFIG 0x28
|
|
#define S5P_DMC_TIMINGAREF 0x30
|
|
#define S5P_DMC_TIMINGROW 0x34
|
|
#define S5P_DMC_TIMINGDATA 0x38
|
|
#define S5P_DMC_TIMINGPOWER 0x3C
|
|
#define S5P_DMC_PHYSTATUS 0x40
|
|
#define S5P_DMC_MRSTATUS 0x54
|
|
|
|
/* DRAM commands */
|
|
#define CMD(x) ((x) << 24)
|
|
#define BANK(x) ((x) << 16)
|
|
#define CHIP(x) ((x) << 20)
|
|
#define ADDR(x) (x)
|
|
|
|
/**
|
|
* MR definition:
|
|
* 1 11
|
|
* 2 1098 7654 3210
|
|
* | | ^^^- burst length, 010=4, 011=8
|
|
* | | ^- burst type 0=sequnential, 1=interleaved
|
|
* | ^^^-- CAS latency
|
|
* | ^----- test, 0=normal, 1=test
|
|
* |^---- DLL reset, 1=yes
|
|
* ^^^----- WR, 1=2, 2=3 etc.
|
|
* ^------- PD, 0=fast exit, 1=low power
|
|
*
|
|
* EMR1 definition:
|
|
* 1 11
|
|
* 2 1098 7654 3210
|
|
* | ^- DLL, 0=enable
|
|
* | ^-- output strength, 0=full, 1=reduced
|
|
* |^.. .^--- Rtt, 00=off, 01=75, 10=150, 11=50 Ohm
|
|
* | ^^ ^-- Posted CAS# AL, 0-6
|
|
* ^^ ^------ OCD: 000=OCD exit, 111=enable defaults
|
|
* ^------ DQS#, 0=enable, 1=disable
|
|
* ^------- RDQS enable, 0=no, 1=yes
|
|
* ^-------- outputs, 0=enabled, 1=disabled
|
|
*
|
|
* EMR2 definition:
|
|
* bit 7
|
|
* 1 1
|
|
* 2 1098 7654 3210
|
|
* ^-- SRT, 0=1x (0-85 deg.C), 1=2x (>85 deg.C)
|
|
* all other bits = 0
|
|
*
|
|
* EMR3 definition: all bits 0
|
|
*/
|
|
|
|
#define MRS CMD(0x0)
|
|
#define PALL CMD(0x1)
|
|
#define PRE CMD(0x2)
|
|
#define DPD CMD(0x3)
|
|
#define REFS CMD(0x4)
|
|
#define REFA CMD(0x5)
|
|
#define CKEL CMD(0x6)
|
|
#define NOP CMD(0x7)
|
|
#define REFSX CMD(0x8)
|
|
#define MRR CMD(0x9)
|
|
|
|
#define EMRS1 (MRS | BANK(1))
|
|
#define EMRS2 (MRS | BANK(2))
|
|
#define EMRS3 (MRS | BANK(3))
|
|
|
|
/* Burst is (1 << S5P_DRAM_BURST), i.e. S5P_DRAM_BURST=2 for burst 4 */
|
|
#ifndef S5P_DRAM_BURST
|
|
/* (LP)DDR2 supports burst 4 only, make it default */
|
|
# define S5P_DRAM_BURST 2
|
|
#endif
|
|
|
|
/**
|
|
* Initialization sequences for different kinds of DRAM
|
|
*/
|
|
#define dcmd(x) writel((x) | CHIP(chip), base + S5P_DMC_DIRECTCMD)
|
|
|
|
static void __bare_init s5p_dram_init_seq_lpddr(phys_addr_t base, unsigned chip)
|
|
{
|
|
const uint32_t emr = 0x400; /* DQS disable */
|
|
const uint32_t mr = (((S5P_DRAM_WR) - 1) << 9)
|
|
| ((S5P_DRAM_CAS) << 4)
|
|
| (S5P_DRAM_BURST);
|
|
/* TODO this sequence is untested */
|
|
dcmd(PALL); dcmd(REFA); dcmd(REFA);
|
|
dcmd(MRS | ADDR(mr));
|
|
dcmd(EMRS1 | ADDR(emr));
|
|
}
|
|
|
|
static void __bare_init s5p_dram_init_seq_lpddr2(phys_addr_t base, unsigned chip)
|
|
{
|
|
const uint32_t mr = (((S5P_DRAM_WR) - 1) << 9)
|
|
| ((S5P_DRAM_CAS) << 4)
|
|
| (S5P_DRAM_BURST);
|
|
/* TODO this sequence is untested */
|
|
dcmd(NOP);
|
|
dcmd(MRS | ADDR(mr));
|
|
do {
|
|
dcmd(MRR);
|
|
} while (readl(base + S5P_DMC_MRSTATUS) & 0x01); /* poll DAI */
|
|
}
|
|
|
|
static void __bare_init s5p_dram_init_seq_ddr2(phys_addr_t base, unsigned chip)
|
|
{
|
|
const uint32_t emr = 0x400; /* DQS disable */
|
|
const uint32_t mr = (((S5P_DRAM_WR) - 1) << 9)
|
|
| ((S5P_DRAM_CAS) << 4)
|
|
| (S5P_DRAM_BURST);
|
|
dcmd(NOP);
|
|
/* FIXME wait here? JEDEC recommends but nobody does */
|
|
dcmd(PALL); dcmd(EMRS2); dcmd(EMRS3);
|
|
dcmd(EMRS1 | ADDR(emr)); /* DQS disable */
|
|
dcmd(MRS | ADDR(mr | 0x100)); /* DLL reset */
|
|
dcmd(PALL); dcmd(REFA); dcmd(REFA);
|
|
dcmd(MRS | ADDR(mr)); /* DLL no reset */
|
|
dcmd(EMRS1 | ADDR(emr | 0x380)); /* OCD defaults */
|
|
dcmd(EMRS1 | ADDR(emr)); /* OCD exit */
|
|
}
|
|
|
|
#undef dcmd
|
|
|
|
static inline void __bare_init s5p_dram_start_dll(phys_addr_t base, uint32_t phycon1)
|
|
{
|
|
uint32_t pc0 = 0x00101000; /* the only legal initial value */
|
|
uint32_t lv;
|
|
|
|
/* Init DLL */
|
|
writel(pc0, base + S5P_DMC_PHYCONTROL0);
|
|
writel(phycon1, base + S5P_DMC_PHYCONTROL1);
|
|
|
|
/* DLL on */
|
|
pc0 |= 0x2;
|
|
writel(pc0, base + S5P_DMC_PHYCONTROL0);
|
|
|
|
/* DLL start */
|
|
pc0 |= 0x1;
|
|
writel(pc0, base + S5P_DMC_PHYCONTROL0);
|
|
|
|
/* Find lock val */
|
|
do {
|
|
lv = readl(base + S5P_DMC_PHYSTATUS);
|
|
} while ((lv & 0x7) != 0x7);
|
|
|
|
lv >>= 6;
|
|
lv &= 0xff; /* ctrl_lock_value[9:2] - coarse */
|
|
pc0 |= (lv << 24); /* ctrl_force */
|
|
writel(pc0, base + S5P_DMC_PHYCONTROL0); /* force value locking */
|
|
}
|
|
|
|
static inline void __bare_init s5p_dram_setup(phys_addr_t base, uint32_t mc0, uint32_t mc1,
|
|
int bus16, uint32_t mcon)
|
|
{
|
|
mcon |= (S5P_DRAM_BURST) << 20;
|
|
/* 16 or 32-bit bus ? */
|
|
mcon |= bus16 ? 0x1000 : 0x2000;
|
|
if (mc1)
|
|
mcon |= 0x10000; /* two chips */
|
|
|
|
writel(mcon, base + S5P_DMC_MEMCONTROL);
|
|
|
|
/* Set up memory layout */
|
|
writel(mc0, base + S5P_DMC_MEMCONFIG0);
|
|
if (mc1)
|
|
writel(mc1, base + S5P_DMC_MEMCONFIG1);
|
|
|
|
/* Open page precharge policy - reasonable defaults */
|
|
writel(0xFF000000, base + S5P_DMC_PRECHCONFIG);
|
|
|
|
/* Set up timings */
|
|
writel(DMC_TIMING_AREF, base + S5P_DMC_TIMINGAREF);
|
|
writel(DMC_TIMING_ROW, base + S5P_DMC_TIMINGROW);
|
|
writel(DMC_TIMING_DATA, base + S5P_DMC_TIMINGDATA);
|
|
writel(DMC_TIMING_PWR, base + S5P_DMC_TIMINGPOWER);
|
|
}
|
|
|
|
static inline void __bare_init s5p_dram_start(phys_addr_t base)
|
|
{
|
|
/* Reasonable defaults and auto-refresh on */
|
|
writel(0x0FFF1070, base + S5P_DMC_CONCONTROL);
|
|
/* Reasonable defaults */
|
|
writel(0xFFFF00FF, base + S5P_DMC_PWRDNCONFIG);
|
|
}
|
|
|
|
/*
|
|
* Initialize LPDDR memory bank
|
|
* TODO: this function is untested, see also init_seq function
|
|
*/
|
|
void __bare_init s5p_init_dram_bank_lpddr(phys_addr_t base, uint32_t mc0, uint32_t mc1, int bus16)
|
|
{
|
|
/* refcount 8, 90 deg. shift */
|
|
s5p_dram_start_dll(base, 0x00000085);
|
|
/* LPDDR type */
|
|
s5p_dram_setup(base, mc0, mc1, bus16, 0x100);
|
|
|
|
/* Start-Up Commands */
|
|
s5p_dram_init_seq_lpddr(base, 0);
|
|
if (mc1)
|
|
s5p_dram_init_seq_lpddr(base, 1);
|
|
|
|
s5p_dram_start(base);
|
|
}
|
|
|
|
/*
|
|
* Initialize LPDDR2 memory bank
|
|
* TODO: this function is untested, see also init_seq function
|
|
*/
|
|
void __bare_init s5p_init_dram_bank_lpddr2(phys_addr_t base, uint32_t mc0, uint32_t mc1, int bus16)
|
|
{
|
|
/* refcount 8, 90 deg. shift */
|
|
s5p_dram_start_dll(base, 0x00000085);
|
|
/* LPDDR2 type */
|
|
s5p_dram_setup(base, mc0, mc1, bus16, 0x200);
|
|
|
|
/* Start-Up Commands */
|
|
s5p_dram_init_seq_lpddr2(base, 0);
|
|
if (mc1)
|
|
s5p_dram_init_seq_lpddr2(base, 1);
|
|
|
|
s5p_dram_start(base);
|
|
}
|
|
|
|
/*
|
|
* Initialize DDR2 memory bank
|
|
*/
|
|
void __bare_init s5p_init_dram_bank_ddr2(phys_addr_t base, uint32_t mc0, uint32_t mc1, int bus16)
|
|
{
|
|
/* refcount 8, 180 deg. shift */
|
|
s5p_dram_start_dll(base, 0x00000086);
|
|
/* DDR2 type */
|
|
s5p_dram_setup(base, mc0, mc1, bus16, 0x400);
|
|
|
|
/* Start-Up Commands */
|
|
s5p_dram_init_seq_ddr2(base, 0);
|
|
if (mc1)
|
|
s5p_dram_init_seq_ddr2(base, 1);
|
|
|
|
s5p_dram_start(base);
|
|
}
|
|
|
|
|
|
#define BANK_ENABLED(base) (readl((base) + S5P_DMC_PHYCONTROL0) & 1)
|
|
#define NUM_EXTRA_CHIPS(base) ((readl((base) + S5P_DMC_MEMCONTROL) >> 16) & 0xF)
|
|
|
|
#define BANK_START(x) ((x) & 0xFF000000)
|
|
#define BANK_END(x) (BANK_START(x) | ~(((x) & 0x00FF0000) << 8))
|
|
#define BANK_LEN(x) (BANK_END(x) - BANK_START(x) + 1)
|
|
|
|
static inline void sortswap(uint32_t *x, uint32_t *y)
|
|
{
|
|
if (*y < *x) {
|
|
*x ^= *y;
|
|
*y ^= *x;
|
|
*x ^= *y;
|
|
}
|
|
}
|
|
|
|
uint32_t s5p_get_memory_size(void)
|
|
{
|
|
int i;
|
|
uint32_t len;
|
|
uint32_t mc[4] = { 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF };
|
|
/* Read MEMCONFIG registers */
|
|
if (BANK_ENABLED(S5P_DMC0_BASE)) {
|
|
mc[0] = readl(S5P_DMC0_BASE + S5P_DMC_MEMCONFIG0);
|
|
if (NUM_EXTRA_CHIPS(S5P_DMC0_BASE) > 0)
|
|
mc[1] = readl(S5P_DMC0_BASE + S5P_DMC_MEMCONFIG1);
|
|
}
|
|
if (BANK_ENABLED(S5P_DMC1_BASE)) {
|
|
mc[2] = readl(S5P_DMC1_BASE + S5P_DMC_MEMCONFIG0);
|
|
if (NUM_EXTRA_CHIPS(S5P_DMC1_BASE) > 0)
|
|
mc[3] = readl(S5P_DMC1_BASE + S5P_DMC_MEMCONFIG1);
|
|
}
|
|
/* Sort using a sorting network */
|
|
sortswap(mc + 0, mc + 2);
|
|
sortswap(mc + 1, mc + 3);
|
|
sortswap(mc + 0, mc + 1);
|
|
sortswap(mc + 2, mc + 3);
|
|
sortswap(mc + 1, mc + 2);
|
|
/* Is at least one chip enabled? */
|
|
if (mc[0] == 0xFFFFFFFF)
|
|
return 0;
|
|
/* Determine maximum continuous region at start */
|
|
len = BANK_LEN(mc[0]);
|
|
for (i = 1; i < 4; ++i) {
|
|
if (BANK_START(mc[i]) == BANK_END(mc[i - 1]) + 1)
|
|
len += BANK_LEN(mc[i]);
|
|
else
|
|
break;
|
|
}
|
|
return len;
|
|
}
|