96 lines
2.6 KiB
C
96 lines
2.6 KiB
C
/*
|
|
* Copyright (C) 2009 Juergen Beisert
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* @file
|
|
* @brief a9m2410dev Baseboad specific initialization routines
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <driver.h>
|
|
#include <init.h>
|
|
#include <asm/io.h>
|
|
#include <mach/s3c24x0-iomap.h>
|
|
|
|
/**
|
|
* Initialize the CPU to be able to work with the a9m2410dev evaluation board
|
|
*/
|
|
int a9m2410dev_devices_init(void)
|
|
{
|
|
unsigned int reg;
|
|
|
|
/* ---------- configure the GPIOs ------------- */
|
|
writel(0x007FFFFF, GPACON);
|
|
writel(0x00000000, GPCCON);
|
|
writel(0x00000000, GPCUP);
|
|
writel(0x00000000, GPDCON);
|
|
writel(0x00000000, GPDUP);
|
|
writel(0xAAAAAAAA, GPECON);
|
|
writel(0x0000E03F, GPEUP);
|
|
writel(0x00000000, GPBCON); /* all inputs */
|
|
writel(0x00000007, GPBUP); /* pullup disabled for GPB0..3 */
|
|
writel(0x00009000, GPFCON); /* GPF7 CLK_INT#, GPF6 Debug-LED */
|
|
writel(0x000000FF, GPFUP);
|
|
writel(readl(GPGDAT) | 0x1010, GPGDAT); /* switch off IDLE_SW#, switch off LCD backlight */
|
|
writel(0x0100A93A, GPGCON); /* switch on USB device */
|
|
writel(0x0000F000, GPGUP);
|
|
writel(0x0029FAAA, GPHCON);
|
|
|
|
writel((1 << 12) | (0 << 11), GPJDAT);
|
|
writel(0x0016aaaa, GPJCON);
|
|
writel(~((0<<12)| (1<<11)), GPJUP);
|
|
|
|
writel((0 << 12) | (0 << 11), GPJDAT);
|
|
writel(0x0016aaaa, GPJCON);
|
|
writel(0x00001fff, GPJUP);
|
|
|
|
writel(0x00000000, DSC0);
|
|
writel(0x00000000, DSC1);
|
|
|
|
/*
|
|
* USB port1 normal, USB port0 normal, USB1 pads for device
|
|
* PCLK output on CLKOUT0, UPLL CLK output on CLKOUT1,
|
|
*/
|
|
writel((readl(MISCCR) & ~0xFFFF) | 0x0140, MISCCR);
|
|
|
|
/* ----------- configure the access to the outer space ---------- */
|
|
reg = readl(BWSCON);
|
|
|
|
/* CS#1 to access the network controller */
|
|
reg &= ~0xf0;
|
|
reg |= 0xe0;
|
|
writel(0x1350, BANKCON1);
|
|
|
|
/* CS#2 to the dual 16550 UART */
|
|
reg &= ~0xf00;
|
|
reg |= 0x400;
|
|
writel(0x0d50, BANKCON2);
|
|
|
|
writel(reg, BWSCON);
|
|
|
|
/* release the reset signal to the network and UART device */
|
|
reg = readl(MISCCR);
|
|
reg |= 0x10000;
|
|
writel(reg, MISCCR);
|
|
|
|
return 0;
|
|
}
|