This file originates in Linux. Linux has it under include/linux/ directory since commit dccd2304cc90. Let's move it to the same place as well in barebox. This commit was generated by the following commands: find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:' git mv include/sizes.h include/linux/ Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
409 lines
11 KiB
C
409 lines
11 KiB
C
/*
|
|
* arch/arm/mach-at91/at91sam9260_devices.c
|
|
*
|
|
* Copyright (C) 2006 Atmel
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*/
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <linux/sizes.h>
|
|
#include <gpio.h>
|
|
#include <asm/armlinux.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/board.h>
|
|
#include <mach/at91_pmc.h>
|
|
#include <mach/at91sam9260_matrix.h>
|
|
#include <mach/at91sam9_sdramc.h>
|
|
#include <mach/iomux.h>
|
|
#include <mach/io.h>
|
|
#include <mach/cpu.h>
|
|
#include <i2c/i2c-gpio.h>
|
|
|
|
#include "generic.h"
|
|
|
|
void at91_add_device_sdram(u32 size)
|
|
{
|
|
if (!size)
|
|
size = at91sam9260_get_sdram_size();
|
|
|
|
arm_add_mem_device("ram0", AT91_CHIPSELECT_1, size);
|
|
if (cpu_is_at91sam9g20()) {
|
|
add_mem_device("sram0", AT91SAM9G20_SRAM_BASE,
|
|
AT91SAM9G20_SRAM_SIZE, IORESOURCE_MEM_WRITEABLE);
|
|
} else {
|
|
add_mem_device("sram0", AT91SAM9260_SRAM_BASE,
|
|
AT91SAM9260_SRAM_SIZE, IORESOURCE_MEM_WRITEABLE);
|
|
}
|
|
}
|
|
|
|
#if defined(CONFIG_USB_OHCI)
|
|
void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
|
|
{
|
|
int i;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
/* Enable VBus control for UHP ports */
|
|
for (i = 0; i < data->ports; i++) {
|
|
if (gpio_is_valid(data->vbus_pin[i]))
|
|
at91_set_gpio_output(data->vbus_pin[i],
|
|
data->vbus_pin_active_low[i]);
|
|
}
|
|
|
|
add_generic_device("at91_ohci", DEVICE_ID_DYNAMIC, NULL, AT91SAM9260_UHP_BASE,
|
|
1024 * 1024, IORESOURCE_MEM, data);
|
|
}
|
|
#else
|
|
void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* USB Device (Gadget)
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_USB_GADGET_DRIVER_AT91
|
|
void __init at91_add_device_udc(struct at91_udc_data *data)
|
|
{
|
|
if (gpio_is_valid(data->vbus_pin)) {
|
|
at91_set_gpio_input(data->vbus_pin, 0);
|
|
at91_set_deglitch(data->vbus_pin, 1);
|
|
}
|
|
|
|
add_generic_device("at91_udc", DEVICE_ID_DYNAMIC, NULL, AT91SAM9260_BASE_UDP,
|
|
SZ_16K, IORESOURCE_MEM, data);
|
|
}
|
|
#else
|
|
void __init at91_add_device_udc(struct at91_udc_data *data) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_DRIVER_NET_MACB)
|
|
void at91_add_device_eth(int id, struct macb_platform_data *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
/* Pins used for MII and RMII */
|
|
at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
|
|
at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
|
|
at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
|
|
at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
|
|
at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
|
|
at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
|
|
at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
|
|
at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
|
|
at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
|
|
at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
|
|
|
|
if (data->phy_interface != PHY_INTERFACE_MODE_RMII) {
|
|
at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
|
|
at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
|
|
at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
|
|
at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
|
|
at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
|
|
if (data->flags & AT91SAM_ETX2_ETX3_ALTERNATIVE) {
|
|
at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
|
|
at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
|
|
} else {
|
|
at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
|
|
at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
|
|
}
|
|
at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
|
|
}
|
|
|
|
add_generic_device("macb", 0, NULL, AT91SAM9260_BASE_EMAC, 0x1000,
|
|
IORESOURCE_MEM, data);
|
|
}
|
|
#else
|
|
void at91_add_device_eth(int id, struct macb_platform_data *data) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_NAND_ATMEL)
|
|
static struct resource nand_resources[] = {
|
|
[0] = {
|
|
.start = AT91_CHIPSELECT_3,
|
|
.end = AT91_CHIPSELECT_3 + SZ_256M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = AT91_BASE_SYS + AT91_ECC,
|
|
.end = AT91_BASE_SYS + AT91_ECC + 512 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
}
|
|
};
|
|
|
|
void at91_add_device_nand(struct atmel_nand_data *data)
|
|
{
|
|
unsigned long csa;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
csa = at91_sys_read(AT91_MATRIX_EBICSA);
|
|
at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
|
|
|
|
/* enable pin */
|
|
if (gpio_is_valid(data->enable_pin))
|
|
at91_set_gpio_output(data->enable_pin, 1);
|
|
|
|
/* ready/busy pin */
|
|
if (gpio_is_valid(data->rdy_pin))
|
|
at91_set_gpio_input(data->rdy_pin, 1);
|
|
|
|
/* card detect pin */
|
|
if (gpio_is_valid(data->det_pin))
|
|
at91_set_gpio_input(data->det_pin, 1);
|
|
|
|
add_generic_device_res("atmel_nand", 0, nand_resources,
|
|
ARRAY_SIZE(nand_resources), data);
|
|
}
|
|
#else
|
|
void at91_add_device_nand(struct atmel_nand_data *data) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* TWI (i2c)
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_I2C_GPIO)
|
|
static struct i2c_gpio_platform_data pdata_i2c = {
|
|
.sda_pin = AT91_PIN_PA23,
|
|
.sda_is_open_drain = 1,
|
|
.scl_pin = AT91_PIN_PA24,
|
|
.scl_is_open_drain = 1,
|
|
.udelay = 5, /* ~100 kHz */
|
|
};
|
|
|
|
void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
|
|
{
|
|
struct i2c_gpio_platform_data *pdata = &pdata_i2c;
|
|
|
|
i2c_register_board_info(0, devices, nr_devices);
|
|
|
|
at91_set_GPIO_periph(pdata->sda_pin, 1); /* TWD (SDA) */
|
|
at91_set_multi_drive(pdata->sda_pin, 1);
|
|
|
|
at91_set_GPIO_periph(pdata->scl_pin, 1); /* TWCK (SCL) */
|
|
at91_set_multi_drive(pdata->scl_pin, 1);
|
|
|
|
add_generic_device_res("i2c-gpio", 0, NULL, 0, pdata);
|
|
}
|
|
#else
|
|
void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
|
|
#endif
|
|
|
|
/* --------------------------------------------------------------------
|
|
* SPI
|
|
* -------------------------------------------------------------------- */
|
|
|
|
#if defined(CONFIG_DRIVER_SPI_ATMEL)
|
|
static int spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
|
|
|
|
static int spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
|
|
|
|
static struct at91_spi_platform_data spi_pdata[] = {
|
|
[0] = {
|
|
.chipselect = spi0_standard_cs,
|
|
.num_chipselect = ARRAY_SIZE(spi0_standard_cs),
|
|
},
|
|
[1] = {
|
|
.chipselect = spi1_standard_cs,
|
|
.num_chipselect = ARRAY_SIZE(spi1_standard_cs),
|
|
},
|
|
};
|
|
|
|
void __init at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata)
|
|
{
|
|
int i;
|
|
int cs_pin;
|
|
resource_size_t start = ~0;
|
|
|
|
BUG_ON(spi_id > 1);
|
|
|
|
if (!pdata)
|
|
pdata = &spi_pdata[spi_id];
|
|
|
|
for (i = 0; i < pdata->num_chipselect; i++) {
|
|
cs_pin = pdata->chipselect[i];
|
|
|
|
/* enable chip-select pin */
|
|
if (gpio_is_valid(cs_pin))
|
|
at91_set_gpio_output(cs_pin, 1);
|
|
}
|
|
|
|
/* Configure SPI bus(es) */
|
|
switch (spi_id) {
|
|
case 0:
|
|
start = AT91SAM9260_BASE_SPI0;
|
|
at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
|
|
at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
|
|
at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
|
|
break;
|
|
case 1:
|
|
start = AT91SAM9260_BASE_SPI1;
|
|
at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */
|
|
at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
|
|
at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
|
|
break;
|
|
}
|
|
|
|
add_generic_device("atmel_spi", spi_id, NULL, start, SZ_16K,
|
|
IORESOURCE_MEM, pdata);
|
|
}
|
|
#else
|
|
void __init at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata) {}
|
|
#endif
|
|
|
|
resource_size_t __init at91_configure_dbgu(void)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
|
|
at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
|
|
|
|
return AT91_BASE_SYS + AT91_DBGU;
|
|
}
|
|
|
|
resource_size_t __init at91_configure_usart0(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
|
|
at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
|
|
if (pins & ATMEL_UART_DTR)
|
|
at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
|
|
if (pins & ATMEL_UART_DSR)
|
|
at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
|
|
if (pins & ATMEL_UART_DCD)
|
|
at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
|
|
if (pins & ATMEL_UART_RI)
|
|
at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
|
|
|
|
return AT91SAM9260_BASE_US0;
|
|
}
|
|
|
|
resource_size_t __init at91_configure_usart1(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
|
|
|
|
return AT91SAM9260_BASE_US1;
|
|
}
|
|
|
|
resource_size_t __init at91_configure_usart2(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
|
|
at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
|
|
|
|
return AT91SAM9260_BASE_US2;
|
|
}
|
|
|
|
resource_size_t __init at91_configure_usart3(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
|
|
at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
|
|
|
|
return AT91SAM9260_BASE_US3;
|
|
}
|
|
|
|
resource_size_t __init at91_configure_usart4(unsigned pins)
|
|
{
|
|
at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */
|
|
at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */
|
|
|
|
return AT91SAM9260_BASE_US4;
|
|
}
|
|
|
|
resource_size_t __init at91_configure_usart5(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */
|
|
at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
|
|
|
|
return AT91SAM9260_BASE_US5;
|
|
}
|
|
|
|
#if defined(CONFIG_MCI_ATMEL)
|
|
/* Consider only one slot : slot 0 */
|
|
void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
|
|
{
|
|
struct device_d *dev;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
/* need bus_width */
|
|
if (!data->bus_width)
|
|
return;
|
|
|
|
/* input/irq */
|
|
if (gpio_is_valid(data->detect_pin)) {
|
|
at91_set_gpio_input(data->detect_pin, 1);
|
|
at91_set_deglitch(data->detect_pin, 1);
|
|
}
|
|
|
|
if (gpio_is_valid(data->wp_pin))
|
|
at91_set_gpio_input(data->wp_pin, 1);
|
|
|
|
/* CLK */
|
|
at91_set_A_periph(AT91_PIN_PA8, 0);
|
|
|
|
|
|
if (data->slot_b) {
|
|
/* CMD */
|
|
at91_set_B_periph(AT91_PIN_PA1, 1);
|
|
|
|
/* DAT0, maybe DAT1..DAT3 */
|
|
at91_set_B_periph(AT91_PIN_PA0, 1);
|
|
if (data->bus_width == 4) {
|
|
at91_set_B_periph(AT91_PIN_PA3, 1);
|
|
at91_set_B_periph(AT91_PIN_PA4, 1);
|
|
at91_set_B_periph(AT91_PIN_PA5, 1);
|
|
}
|
|
} else {
|
|
/* CMD */
|
|
at91_set_A_periph(AT91_PIN_PA7, 1);
|
|
|
|
/* DAT0, maybe DAT1..DAT3 */
|
|
at91_set_A_periph(AT91_PIN_PA6, 1);
|
|
if (data->bus_width == 4) {
|
|
at91_set_A_periph(AT91_PIN_PA9, 1);
|
|
at91_set_A_periph(AT91_PIN_PA10, 1);
|
|
at91_set_A_periph(AT91_PIN_PA11, 1);
|
|
}
|
|
}
|
|
|
|
dev = add_generic_device("atmel_mci", mmc_id, NULL, AT91SAM9260_BASE_MCI, SZ_16K,
|
|
IORESOURCE_MEM, data);
|
|
}
|
|
#else
|
|
void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
|
|
#endif
|
|
|
|
static int at91_fixup_device(void)
|
|
{
|
|
at91_rtt_irq_fixup(IOMEM(AT91SAM9260_BASE_RTT));
|
|
return 0;
|
|
}
|
|
late_initcall(at91_fixup_device);
|