There is no point in repeating the board setup on the main cluster. It is done either in the AVP startup path or from a first stage loader. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
304 lines
8.1 KiB
C
304 lines
8.1 KiB
C
/*
|
|
* Copyright (C) 2013-2014 Lucas Stach <l.stach@pengutronix.de>
|
|
*
|
|
* Partly based on code (C) Copyright 2010-2011
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/barebox-arm-head.h>
|
|
#include <asm/barebox-arm.h>
|
|
#include <mach/lowlevel.h>
|
|
#include <mach/tegra20-car.h>
|
|
#include <mach/tegra20-pmc.h>
|
|
#include <mach/tegra30-car.h>
|
|
#include <mach/tegra30-flow.h>
|
|
#include <mach/tegra124-car.h>
|
|
|
|
/* instruct the PMIC to enable the CPU power rail */
|
|
static void enable_maincomplex_powerrail(void)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(TEGRA_PMC_BASE + PMC_CNTRL);
|
|
reg |= PMC_CNTRL_CPUPWRREQ_OE;
|
|
writel(reg, TEGRA_PMC_BASE);
|
|
}
|
|
|
|
/* put every core in the main CPU complex into reset state */
|
|
static void assert_maincomplex_reset(int num_cores)
|
|
{
|
|
u32 mask = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < num_cores; i++) {
|
|
if (tegra_get_chiptype() >= TEGRA114)
|
|
mask |= 0x111001 << i;
|
|
else
|
|
mask |= 0x1111 << i;
|
|
}
|
|
|
|
writel(mask, TEGRA_CLK_RESET_BASE + CRC_RST_CPU_CMPLX_SET);
|
|
writel(CRC_RST_DEV_L_CPU, TEGRA_CLK_RESET_BASE + CRC_RST_DEV_L_SET);
|
|
}
|
|
|
|
/* release reset state of the first core of the main CPU complex */
|
|
static void deassert_cpu0_reset(void)
|
|
{
|
|
u32 reg;
|
|
|
|
if (tegra_get_chiptype() >= TEGRA114)
|
|
reg = 0x21fff00f;
|
|
else
|
|
reg = 0x1111;
|
|
|
|
writel(reg, TEGRA_CLK_RESET_BASE + CRC_RST_CPU_CMPLX_CLR);
|
|
writel(CRC_RST_DEV_L_CPU, TEGRA_CLK_RESET_BASE + CRC_RST_DEV_L_CLR);
|
|
}
|
|
|
|
/* stop all internal and external clocks to the main CPU complex */
|
|
static void stop_maincomplex_clocks(int num_cores)
|
|
{
|
|
u32 reg;
|
|
int i;
|
|
|
|
reg = readl(TEGRA_CLK_RESET_BASE + CRC_CLK_CPU_CMPLX);
|
|
for (i = 0; i < num_cores; i++)
|
|
reg |= 0x1 << (8 + i);
|
|
writel(reg, TEGRA_CLK_RESET_BASE + CRC_CLK_CPU_CMPLX);
|
|
|
|
reg = readl(TEGRA_CLK_RESET_BASE + CRC_CLK_OUT_ENB_L);
|
|
reg &= ~CRC_CLK_OUT_ENB_L_CPU;
|
|
writel(reg, TEGRA_CLK_RESET_BASE + CRC_CLK_OUT_ENB_L);
|
|
}
|
|
|
|
struct pll_config {
|
|
u16 divn;
|
|
u16 divm;
|
|
u16 divp;
|
|
u16 cpcon;
|
|
};
|
|
|
|
static struct pll_config pllx_config_table[][4] = {
|
|
{
|
|
{1000, 13, 0, 12}, /* OSC 13.0 MHz */
|
|
{625, 12, 0, 8 }, /* OSC 19.2 MHz */
|
|
{1000, 12, 0, 12}, /* OSC 12.0 MHz */
|
|
{1000, 26, 0, 12}, /* OSC 26.0 MHz */
|
|
}, /* TEGRA 20 */
|
|
{
|
|
{600, 13, 0, 8 },
|
|
{500, 16, 0, 8 },
|
|
{600, 12, 0, 8 },
|
|
{600, 26, 0, 8 },
|
|
}, /* TEGRA 30 */
|
|
{
|
|
}, /* TEGRA 114 */
|
|
{
|
|
{ 108, 1, 1, 0 },
|
|
{ 73, 1, 1, 0 },
|
|
{ 116, 1, 1, 0 },
|
|
{ 108, 2, 1, 0 },
|
|
}, /* TEGRA 124 */
|
|
};
|
|
|
|
static void init_pllx(void)
|
|
{
|
|
struct pll_config *conf;
|
|
enum tegra_chiptype chiptype;
|
|
u8 osc_freq;
|
|
u32 reg;
|
|
|
|
/* If PLLX is already enabled, just return */
|
|
if (readl(TEGRA_CLK_RESET_BASE + CRC_PLLX_BASE) & CRC_PLLX_BASE_ENABLE)
|
|
return;
|
|
|
|
chiptype = tegra_get_chiptype();
|
|
|
|
/* disable IDDQ on T124 */
|
|
if (chiptype == TEGRA124) {
|
|
reg = readl(TEGRA_CLK_RESET_BASE + CRC_PLLX_MISC_3);
|
|
reg &= ~CRC_PLLX_MISC_3_IDDQ;
|
|
writel(reg, TEGRA_CLK_RESET_BASE + CRC_PLLX_MISC_3);
|
|
tegra_ll_delay_usec(2);
|
|
}
|
|
|
|
osc_freq = (readl(TEGRA_CLK_RESET_BASE + CRC_OSC_CTRL) &
|
|
CRC_OSC_CTRL_OSC_FREQ_MASK) >> CRC_OSC_CTRL_OSC_FREQ_SHIFT;
|
|
|
|
conf = &pllx_config_table[chiptype][osc_freq];
|
|
/* we are not relocated yet - globals are a bit more tricky here */
|
|
conf = (struct pll_config *)((char *)conf - get_runtime_offset());
|
|
|
|
/* set PLL bypass and frequency parameters */
|
|
reg = CRC_PLLX_BASE_BYPASS;
|
|
reg |= (conf->divm << CRC_PLLX_BASE_DIVM_SHIFT) &
|
|
CRC_PLLX_BASE_DIVM_MASK;
|
|
reg |= (conf->divn << CRC_PLLX_BASE_DIVN_SHIFT) &
|
|
CRC_PLLX_BASE_DIVN_MASK;
|
|
reg |= (conf->divp << CRC_PLLX_BASE_DIVP_SHIFT) &
|
|
CRC_PLLX_BASE_DIVP_MASK;
|
|
writel(reg, TEGRA_CLK_RESET_BASE + CRC_PLLX_BASE);
|
|
|
|
/* set chargepump parameters */
|
|
reg = (conf->cpcon << CRC_PLLX_MISC_CPCON_SHIFT) &
|
|
CRC_PLLX_MISC_CPCON_MASK;
|
|
if (conf->divn > 600)
|
|
reg |= CRC_PLLX_MISC_DCCON;
|
|
writel(reg, TEGRA_CLK_RESET_BASE + CRC_PLLX_MISC);
|
|
|
|
/* enable PLL and disable bypass */
|
|
reg = readl(TEGRA_CLK_RESET_BASE + CRC_PLLX_BASE);
|
|
reg |= CRC_PLLX_BASE_ENABLE;
|
|
reg &= ~CRC_PLLX_BASE_BYPASS;
|
|
writel(reg, TEGRA_CLK_RESET_BASE + CRC_PLLX_BASE);
|
|
|
|
/* enable PLL lock */
|
|
reg = readl(TEGRA_CLK_RESET_BASE + CRC_PLLX_MISC);
|
|
reg |= CRC_PLLX_MISC_LOCK_ENABLE;
|
|
writel(reg, TEGRA_CLK_RESET_BASE + CRC_PLLX_MISC);
|
|
}
|
|
|
|
/* start internal and external clocks to core 0 of the main CPU complex */
|
|
static void start_cpu0_clocks(void)
|
|
{
|
|
u32 reg;
|
|
|
|
/* setup PLLX */
|
|
init_pllx();
|
|
|
|
/* setup super CLK */
|
|
writel(CRC_SCLK_BURST_POLICY_SYS_STATE_RUN <<
|
|
CRC_SCLK_BURST_POLICY_SYS_STATE_SHIFT,
|
|
TEGRA_CLK_RESET_BASE + CRC_SCLK_BURST_POLICY);
|
|
writel(CRC_SUPER_SDIV_ENB, TEGRA_CLK_RESET_BASE + CRC_SUPER_SCLK_DIV);
|
|
|
|
writel(1 << CRC_CLK_SYSTEM_RATE_AHB_SHIFT,
|
|
TEGRA_CLK_RESET_BASE + CRC_CLK_SYSTEM_RATE);
|
|
|
|
if (tegra_get_chiptype() >= TEGRA30) {
|
|
/* init MSELECT */
|
|
writel(CRC_RST_DEV_V_MSELECT,
|
|
TEGRA_CLK_RESET_BASE + CRC_RST_DEV_V_SET);
|
|
writel((CRC_CLK_SOURCE_MSEL_SRC_CLKM <<
|
|
CRC_CLK_SOURCE_MSEL_SRC_SHIFT),
|
|
TEGRA_CLK_RESET_BASE + CRC_CLK_SOURCE_MSEL);
|
|
writel(CRC_CLK_OUT_ENB_V_MSELECT,
|
|
TEGRA_CLK_RESET_BASE + CRC_CLK_OUT_ENB_V_SET);
|
|
tegra_ll_delay_usec(3);
|
|
writel(CRC_RST_DEV_V_MSELECT,
|
|
TEGRA_CLK_RESET_BASE + CRC_RST_DEV_V_CLR);
|
|
}
|
|
|
|
/* deassert clock stop for cpu 0 */
|
|
reg = readl(TEGRA_CLK_RESET_BASE + CRC_CLK_CPU_CMPLX);
|
|
reg &= ~(0xf << 8);
|
|
writel(reg, TEGRA_CLK_RESET_BASE + CRC_CLK_CPU_CMPLX);
|
|
|
|
/* enable main CPU complex clock */
|
|
reg = readl(TEGRA_CLK_RESET_BASE + CRC_CLK_OUT_ENB_L);
|
|
reg |= CRC_CLK_OUT_ENB_L_CPU;
|
|
writel(reg, TEGRA_CLK_RESET_BASE + CRC_CLK_OUT_ENB_L);
|
|
|
|
/* give clocks some time to settle */
|
|
tegra_ll_delay_usec(300);
|
|
}
|
|
|
|
static void power_up_partition(u32 partid)
|
|
{
|
|
u32 reg;
|
|
|
|
if (!(readl(TEGRA_PMC_BASE + PMC_PWRGATE_STATUS) & (1 << partid))) {
|
|
writel(PMC_PWRGATE_TOGGLE_START | partid,
|
|
TEGRA_PMC_BASE + PMC_PWRGATE_TOGGLE);
|
|
|
|
while (!(readl(TEGRA_PMC_BASE + PMC_PWRGATE_STATUS) &
|
|
(1 << partid)));
|
|
|
|
reg = readl(TEGRA_PMC_BASE + PMC_REMOVE_CLAMPING_CMD);
|
|
reg |= (1 << partid);
|
|
writel(reg, TEGRA_PMC_BASE + PMC_REMOVE_CLAMPING_CMD);
|
|
|
|
tegra_ll_delay_usec(1000);
|
|
}
|
|
}
|
|
|
|
static void maincomplex_powerup(void)
|
|
{
|
|
/* main cpu rail */
|
|
power_up_partition(PMC_PARTID_CRAIL);
|
|
|
|
if (tegra_get_chiptype() >= TEGRA114) {
|
|
/* fast cluster uncore part */
|
|
power_up_partition(PMC_PARTID_C0NC);
|
|
/* fast cluster cpu0 part */
|
|
power_up_partition(PMC_PARTID_CE0);
|
|
}
|
|
}
|
|
|
|
static void tegra_cluster_switch_hp(void)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(TEGRA_FLOW_CTRL_BASE + FLOW_CLUSTER_CONTROL);
|
|
reg &= ~FLOW_CLUSTER_CONTROL_ACTIVE_LP;
|
|
writel(reg, TEGRA_FLOW_CTRL_BASE + FLOW_CLUSTER_CONTROL);
|
|
}
|
|
|
|
void tegra_avp_reset_vector(uint32_t boarddata)
|
|
{
|
|
int num_cores;
|
|
unsigned int entry_address = 0;
|
|
|
|
/* put boarddata in scratch reg, for main CPU to fetch after startup */
|
|
writel(boarddata, TEGRA_PMC_BASE + PMC_SCRATCH(10));
|
|
|
|
/* we want to bring up the high performance CPU complex */
|
|
if (tegra_get_chiptype() >= TEGRA30)
|
|
tegra_cluster_switch_hp();
|
|
|
|
/* get the number of cores in the main CPU complex of the current SoC */
|
|
num_cores = tegra_get_num_cores();
|
|
|
|
/* bring down main CPU complex (this may be a warm boot) */
|
|
enable_maincomplex_powerrail();
|
|
assert_maincomplex_reset(num_cores);
|
|
stop_maincomplex_clocks(num_cores);
|
|
|
|
/* set start address for the main CPU complex processors */
|
|
switch (tegra_get_chiptype()) {
|
|
case TEGRA20:
|
|
entry_address = 0x108000;
|
|
break;
|
|
case TEGRA30:
|
|
case TEGRA124:
|
|
entry_address = 0x80108000;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
writel(entry_address, TEGRA_EXCEPTION_VECTORS_BASE + 0x100);
|
|
|
|
/* bring up main CPU complex */
|
|
start_cpu0_clocks();
|
|
maincomplex_powerup();
|
|
deassert_cpu0_reset();
|
|
|
|
/* assert AVP reset to stop execution here */
|
|
writel(CRC_RST_DEV_L_COP, TEGRA_CLK_RESET_BASE + CRC_RST_DEV_L_SET);
|
|
|
|
unreachable();
|
|
}
|