OMAP_CLOCK_ALL is missing in Kconfig, so remove the "select" statement and all other references to this symbol. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
694 lines
22 KiB
C
694 lines
22 KiB
C
/**
|
|
* @file
|
|
* @brief OMAP DPLL and various clock configuration
|
|
*
|
|
* @ref prcm_init This is the second level clock init for PRCM as defined in
|
|
* clocks.h -- called from SRAM, or Flash (using temp SRAM stack).
|
|
*
|
|
* During reconfiguring the clocks while in SDRAM/Flash, we can have invalid
|
|
* clock configuration to which ARM instruction/data fetch ops can fail.
|
|
* This critical path is handled by relocating the relevant functions in
|
|
* omap3_clock_core.S to OMAP's ISRAM and executing it there.
|
|
*
|
|
* @warning IMPORTANT: These functions run from ISRAM stack, so no bss sections
|
|
* should be used, functions cannot use global variables/switch constructs.
|
|
*
|
|
* Originally from http://linux.omap.com/pub/bootloader/3430sdp/u-boot-v1.tar.gz
|
|
*
|
|
* (C) Copyright 2006-2008
|
|
* Texas Instruments, <www.ti.com>
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <io.h>
|
|
#include <mach/omap3-silicon.h>
|
|
#include <mach/clocks.h>
|
|
#include <mach/omap3-clock.h>
|
|
#include <mach/timers.h>
|
|
#include <mach/sys_info.h>
|
|
#include <mach/syslib.h>
|
|
|
|
#define S32K_CR (OMAP3_32KTIMER_BASE + 0x10)
|
|
|
|
/* Following functions are exported from omap3_clock_core.S */
|
|
/* Helper functions */
|
|
static u32 get_osc_clk_speed(void);
|
|
static void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel);
|
|
static void per_clocks_enable(void);
|
|
|
|
/**
|
|
* @brief Determine reference oscillator speed
|
|
*
|
|
* This is based on known 32kHz clock and gptimer.
|
|
*
|
|
* @return clock speed S38_4M, S26M S24M S19_2M S13M S12M
|
|
*/
|
|
static u32 get_osc_clk_speed(void)
|
|
{
|
|
u32 start, cstart, cend, cdiff, cdiv, val;
|
|
|
|
val = readl(OMAP3_PRM_REG(CLKSRC_CTRL));
|
|
|
|
if (val & SYSCLK_DIV_2)
|
|
cdiv = 2;
|
|
else if (val & SYSCLK_DIV_1)
|
|
cdiv = 1;
|
|
else
|
|
/*
|
|
* Should never reach here!
|
|
* To proceed, assume divider as 1.
|
|
*/
|
|
cdiv = 1;
|
|
|
|
/* enable timer2 */
|
|
val = readl(OMAP3_CM_REG(CLKSEL_WKUP)) | (0x1 << 0);
|
|
writel(val, OMAP3_CM_REG(CLKSEL_WKUP)); /* select sys_clk for GPT1 */
|
|
|
|
/* Enable I and F Clocks for GPT1 */
|
|
val = readl(OMAP3_CM_REG(ICLKEN_WKUP)) | (0x1 << 0) | (0x1 << 2);
|
|
writel(val, OMAP3_CM_REG(ICLKEN_WKUP));
|
|
val = readl(OMAP3_CM_REG(FCLKEN_WKUP)) | (0x1 << 0);
|
|
writel(val, OMAP3_CM_REG(FCLKEN_WKUP));
|
|
/* start counting at 0 */
|
|
writel(0, OMAP3_GPTIMER1_BASE + TLDR);
|
|
/* enable clock */
|
|
writel(GPT_EN, OMAP3_GPTIMER1_BASE + TCLR);
|
|
/* enable 32kHz source - enabled out of reset */
|
|
/* determine sys_clk via gauging */
|
|
|
|
start = 20 + readl(S32K_CR); /* start time in 20 cycles */
|
|
while (readl(S32K_CR) < start) ; /* dead loop till start time */
|
|
/* get start sys_clk count */
|
|
cstart = readl(OMAP3_GPTIMER1_BASE + TCRR);
|
|
while (readl(S32K_CR) < (start + 20)) ; /* wait for 40 cycles */
|
|
/* get end sys_clk count */
|
|
cend = readl(OMAP3_GPTIMER1_BASE + TCRR);
|
|
cdiff = cend - cstart; /* get elapsed ticks */
|
|
|
|
if (cdiv == 2)
|
|
cdiff *= 2;
|
|
|
|
/* based on number of ticks assign speed */
|
|
if (cdiff > 19000)
|
|
return S38_4M;
|
|
else if (cdiff > 15200)
|
|
return S26M;
|
|
else if (cdiff > 13000)
|
|
return S24M;
|
|
else if (cdiff > 9000)
|
|
return S19_2M;
|
|
else if (cdiff > 7600)
|
|
return S13M;
|
|
else
|
|
return S12M;
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the sys_clkin_sel field value
|
|
*
|
|
* This is based on input oscillator clock frequency.
|
|
*
|
|
* @param[in] osc_clk - Oscilaltor Clock to OMAP
|
|
* @param[out] sys_clkin_sel - returns the sys_clk selection
|
|
*
|
|
* @return void
|
|
*/
|
|
static void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
|
|
{
|
|
if (osc_clk == S38_4M)
|
|
*sys_clkin_sel = 4;
|
|
else if (osc_clk == S26M)
|
|
*sys_clkin_sel = 3;
|
|
else if (osc_clk == S19_2M)
|
|
*sys_clkin_sel = 2;
|
|
else if (osc_clk == S13M)
|
|
*sys_clkin_sel = 1;
|
|
else if (osc_clk == S12M)
|
|
*sys_clkin_sel = 0;
|
|
}
|
|
|
|
static struct dpll_param core_dpll_param_34x_es1[] = {
|
|
{ .m = 0x19F, .n = 0x0E, .fsel = 0x03, .m2 = 0x01, }, /* 12 MHz */
|
|
{ .m = 0x1B2, .n = 0x10, .fsel = 0x03, .m2 = 0x01, }, /* 13 MHz */
|
|
{ .m = 0x19F, .n = 0x17, .fsel = 0x03, .m2 = 0x01, }, /* 19.2 MHz */
|
|
{ .m = 0x1B2, .n = 0x21, .fsel = 0x03, .m2 = 0x01, }, /* 26 MHz */
|
|
{ .m = 0x19F, .n = 0x2F, .fsel = 0x03, .m2 = 0x01, }, /* 38.4 MHz */
|
|
};
|
|
|
|
static struct dpll_param core_dpll_param_34x_es2[] = {
|
|
{ .m = 0x0A6, .n = 0x05, .fsel = 0x07, .m2 = 0x01, }, /* 12 MHz */
|
|
{ .m = 0x14C, .n = 0x0C, .fsel = 0x03, .m2 = 0x01, }, /* 13 MHz */
|
|
{ .m = 0x19F, .n = 0x17, .fsel = 0x03, .m2 = 0x01, }, /* 19.2 MHz */
|
|
{ .m = 0x0A6, .n = 0x0C, .fsel = 0x07, .m2 = 0x01, }, /* 26 MHz */
|
|
{ .m = 0x19F, .n = 0x2F, .fsel = 0x03, .m2 = 0x01, }, /* 38.4 MHz */
|
|
};
|
|
|
|
/**
|
|
* @brief Initialize CORE DPLL for OMAP34x
|
|
*
|
|
* @param[in] cpu_rev - Silicon revision
|
|
* @param[in] clk_sel - Clock selection used as index into the dpll table
|
|
*/
|
|
static void init_core_dpll_34x(u32 cpu_rev, u32 clk_sel)
|
|
{
|
|
struct dpll_param *dp;
|
|
if (cpu_rev == OMAP34XX_ES1)
|
|
dp = core_dpll_param_34x_es1;
|
|
else
|
|
dp = core_dpll_param_34x_es2;
|
|
|
|
dp += clk_sel;
|
|
|
|
if (running_in_sram()) {
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL), 0, 3, PLL_FAST_RELOCK_BYPASS);
|
|
wait_on_value((0x1 << 0), 0, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
|
|
|
|
/*
|
|
* OMAP3430 ES1.0 Errata 1.50
|
|
* Writing default value doesn't work. First write a different
|
|
* value and then write the default value.
|
|
*/
|
|
|
|
/* CM_CLKSEL1_EMU[DIV_DPLL3] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_EMU), 16, 5, CORE_M3X2 + 1);
|
|
sr32(OMAP3_CM_REG(CLKSEL1_EMU), 16, 5, CORE_M3X2);
|
|
|
|
/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL), 27, 2, dp->m2);
|
|
|
|
/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL), 16, 11, dp->m);
|
|
|
|
/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL), 8, 7, dp->n);
|
|
|
|
/* Set source CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL), 6, 1, 0);
|
|
|
|
sr32(OMAP3_CM_REG(CLKSEL_CORE), 8, 4, CORE_SSI_DIV);
|
|
sr32(OMAP3_CM_REG(CLKSEL_CORE), 4, 2, CORE_FUSB_DIV);
|
|
sr32(OMAP3_CM_REG(CLKSEL_CORE), 2, 2, CORE_L4_DIV);
|
|
sr32(OMAP3_CM_REG(CLKSEL_CORE), 0, 2, CORE_L3_DIV);
|
|
sr32(OMAP3_CM_REG(CLKSEL_GFX), 0, 3, GFX_DIV_34X);
|
|
sr32(OMAP3_CM_REG(CLKSEL_WKUP), 1, 2, WKUP_RSM);
|
|
|
|
/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL), 4, 4, dp->fsel);
|
|
|
|
/* Lock Mode */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL), 0, 3, PLL_LOCK);
|
|
wait_on_value((0x1 << 0), 1, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
|
|
} else if (running_in_flash()) {
|
|
/***Oopps.. Wrong .config!! *****/
|
|
hang();
|
|
}
|
|
}
|
|
|
|
/* PER DPLL values are same for both ES1 and ES2 */
|
|
static struct dpll_param per_dpll_param_34x[] = {
|
|
{ .m = 0x0D8, .n = 0x05, .fsel = 0x07, .m2 = 0x09, }, /* 12 MHz */
|
|
{ .m = 0x1B0, .n = 0x0C, .fsel = 0x03, .m2 = 0x09, }, /* 13 MHz */
|
|
{ .m = 0x0E1, .n = 0x09, .fsel = 0x07, .m2 = 0x09, }, /* 19.2 MHz */
|
|
{ .m = 0x0D8, .n = 0x0C, .fsel = 0x07, .m2 = 0x09, }, /* 26 MHz */
|
|
{ .m = 0x0E1, .n = 0x13, .fsel = 0x07, .m2 = 0x09, }, /* 38.4 MHz */
|
|
};
|
|
|
|
/**
|
|
* @brief Initialize PER DPLL for OMAP34x
|
|
*
|
|
* @param[in] cpu_rev - Silicon revision
|
|
* @param[in] clk_sel - Clock selection used as index into the dpll table
|
|
*/
|
|
static void init_per_dpll_34x(u32 cpu_rev, u32 clk_sel)
|
|
{
|
|
struct dpll_param *dp = per_dpll_param_34x;
|
|
|
|
dp += clk_sel;
|
|
|
|
/*
|
|
* OMAP3430 ES1.0 Errata 1.50
|
|
* Writing default value doesn't work. First write a different
|
|
* value and then write the default value.
|
|
*/
|
|
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL), 16, 3, PLL_STOP);
|
|
wait_on_value((0x1 << 1), 0, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
|
|
|
|
/* Set M6 */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_EMU), 24, 5, PER_M6X2 + 1);
|
|
sr32(OMAP3_CM_REG(CLKSEL1_EMU), 24, 5, PER_M6X2);
|
|
|
|
/* Set M5 */
|
|
sr32(OMAP3_CM_REG(CLKSEL_CAM), 0, 5, PER_M5X2 + 1);
|
|
sr32(OMAP3_CM_REG(CLKSEL_CAM), 0, 5, PER_M5X2);
|
|
|
|
/* Set M4 */
|
|
sr32(OMAP3_CM_REG(CLKSEL_DSS), 0, 5, PER_M4X2 + 1);
|
|
sr32(OMAP3_CM_REG(CLKSEL_DSS), 0, 5, PER_M4X2);
|
|
|
|
/* Set M3 */
|
|
sr32(OMAP3_CM_REG(CLKSEL_DSS), 8, 5, PER_M3X2 + 1);
|
|
sr32(OMAP3_CM_REG(CLKSEL_DSS), 8, 5, PER_M3X2);
|
|
|
|
/* Set M2 */
|
|
sr32(OMAP3_CM_REG(CLKSEL3_PLL), 0, 5, dp->m2 + 1);
|
|
sr32(OMAP3_CM_REG(CLKSEL3_PLL), 0, 5, dp->m2);
|
|
|
|
/* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:18] */
|
|
sr32(OMAP3_CM_REG(CLKSEL2_PLL), 8, 11, dp->m);
|
|
|
|
/* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */
|
|
sr32(OMAP3_CM_REG(CLKSEL2_PLL), 0, 7, dp->n);
|
|
|
|
/* FREQSEL (PERIPH_DPLL_FREQSEL): CM_CLKEN_PLL[20:23] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL), 20, 4, dp->fsel);
|
|
|
|
/* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL), 16, 3, PLL_LOCK);
|
|
wait_on_value((0x1 << 1), 2, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
|
|
}
|
|
|
|
static struct dpll_param mpu_dpll_param_34x_es1[] = {
|
|
{ .m = 0x0FE, .n = 0x07, .fsel = 0x05, .m2 = 0x01, }, /* 12 MHz */
|
|
{ .m = 0x17D, .n = 0x0C, .fsel = 0x03, .m2 = 0x01, }, /* 13 MHz */
|
|
{ .m = 0x179, .n = 0x12, .fsel = 0x04, .m2 = 0x01, }, /* 19.2 MHz */
|
|
{ .m = 0x17D, .n = 0x19, .fsel = 0x03, .m2 = 0x01, }, /* 26 MHz */
|
|
{ .m = 0x1FA, .n = 0x32, .fsel = 0x03, .m2 = 0x01, }, /* 38.4 MHz */
|
|
};
|
|
|
|
static struct dpll_param mpu_dpll_param_34x_es2[] = {
|
|
{.m = 0x0FA, .n = 0x05, .fsel = 0x07, .m2 = 0x01, }, /* 12 MHz */
|
|
{.m = 0x1F4, .n = 0x0C, .fsel = 0x03, .m2 = 0x01, }, /* 13 MHz */
|
|
{.m = 0x271, .n = 0x17, .fsel = 0x03, .m2 = 0x01, }, /* 19.2 MHz */
|
|
{.m = 0x0FA, .n = 0x0C, .fsel = 0x07, .m2 = 0x01, }, /* 26 MHz */
|
|
{.m = 0x271, .n = 0x2F, .fsel = 0x03, .m2 = 0x01, }, /* 38.4 MHz */
|
|
};
|
|
|
|
/**
|
|
* @brief Initialize MPU DPLL for OMAP34x
|
|
*
|
|
* The MPU DPLL is already unlocked when control reaches here. This
|
|
* function doesn't lock the DPLL either - defers to the caller.
|
|
*
|
|
* @param[in] cpu_rev - Silicon revision
|
|
* @param[in] clk_sel - Clock selection used as index into the dpll table
|
|
*/
|
|
static void init_mpu_dpll_34x(u32 cpu_rev, u32 clk_sel)
|
|
{
|
|
struct dpll_param *dp;
|
|
|
|
if (cpu_rev == OMAP34XX_ES1)
|
|
dp = mpu_dpll_param_34x_es1;
|
|
else
|
|
dp = mpu_dpll_param_34x_es2;
|
|
|
|
dp += clk_sel;
|
|
|
|
/* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */
|
|
sr32(OMAP3_CM_REG(CLKSEL2_PLL_MPU), 0, 5, dp->m2);
|
|
|
|
/* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL_MPU), 8, 11, dp->m);
|
|
|
|
/* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL_MPU), 0, 7, dp->n);
|
|
|
|
/* FREQSEL (MPU_DPLL_FREQSEL) : CM_CLKEN_PLL_MPU[4:7] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL_MPU), 4, 4, dp->fsel);
|
|
}
|
|
|
|
static struct dpll_param iva_dpll_param_34x_es1[] = {
|
|
{ .m = 0x07D, .n = 0x05, .fsel = 0x07, .m2 = 0x01, }, /* 12 MHz */
|
|
{ .m = 0x0FA, .n = 0x0C, .fsel = 0x03, .m2 = 0x01, }, /* 13 MHz */
|
|
{ .m = 0x082, .n = 0x09, .fsel = 0x07, .m2 = 0x01, }, /* 19.2 MHz */
|
|
{ .m = 0x07D, .n = 0x0C, .fsel = 0x07, .m2 = 0x01, }, /* 26 MHz */
|
|
{ .m = 0x13F, .n = 0x30, .fsel = 0x03, .m2 = 0x01, }, /* 38.4 MHz */
|
|
};
|
|
|
|
static struct dpll_param iva_dpll_param_34x_es2[] = {
|
|
{ .m = 0x0B4, .n = 0x05, .fsel = 0x07, .m2 = 0x01, }, /* 12 MHz */
|
|
{ .m = 0x168, .n = 0x0C, .fsel = 0x03, .m2 = 0x01, }, /* 13 MHz */
|
|
{ .m = 0x0E1, .n = 0x0B, .fsel = 0x06, .m2 = 0x01, }, /* 19.2 MHz */
|
|
{ .m = 0x0B4, .n = 0x0C, .fsel = 0x07, .m2 = 0x01, }, /* 26 MHz */
|
|
{ .m = 0x0E1, .n = 0x17, .fsel = 0x06, .m2 = 0x01, }, /* 38.4 MHz */
|
|
};
|
|
|
|
/**
|
|
* @brief Initialize IVA DPLL for OMAP34x
|
|
*
|
|
* @param[in] cpu_rev - Silicon revision
|
|
* @param[in] clk_sel - Clock selection used as index into the dpll table
|
|
*/
|
|
static void init_iva_dpll_34x(u32 cpu_rev, u32 clk_sel)
|
|
{
|
|
struct dpll_param *dp;
|
|
|
|
if (cpu_rev == OMAP34XX_ES1)
|
|
dp = iva_dpll_param_34x_es1;
|
|
else
|
|
dp = iva_dpll_param_34x_es2;
|
|
|
|
dp += clk_sel;
|
|
|
|
/* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_STOP);
|
|
wait_on_value((0x1 << 0), 0, OMAP3_CM_REG(IDLEST_PLL_IVA2), LDELAY);
|
|
|
|
/* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */
|
|
sr32(OMAP3_CM_REG(CLKSEL2_PLL_IVA2), 0, 5, dp->m2);
|
|
|
|
/* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL_IVA2), 8, 11, dp->m);
|
|
|
|
/* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL_IVA2), 0, 7, dp->n);
|
|
|
|
/* FREQSEL (IVA2_DPLL_FREQSEL) : CM_CLKEN_PLL_IVA2[4:7] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL_IVA2), 4, 4, dp->fsel);
|
|
|
|
/* LOCK (MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_LOCK);
|
|
wait_on_value((0x1 << 0), 1, OMAP3_CM_REG(IDLEST_PLL_IVA2), LDELAY);
|
|
}
|
|
|
|
/* FIXME: All values correspond to 26MHz only */
|
|
static struct dpll_param core_dpll_param_36x[] = {
|
|
{ .m = 0x0C8, .n = 0x0C, .fsel = 0x00, .m2 = 0x01, }, /* 12 MHz */
|
|
{ .m = 0x0C8, .n = 0x0C, .fsel = 0x00, .m2 = 0x01, }, /* 13 MHz */
|
|
{ .m = 0x0C8, .n = 0x0C, .fsel = 0x00, .m2 = 0x01, }, /* 19.2 MHz */
|
|
{ .m = 0x0C8, .n = 0x0C, .fsel = 0x00, .m2 = 0x01, }, /* 26 MHz */
|
|
{ .m = 0x0C8, .n = 0x0C, .fsel = 0x00, .m2 = 0x01, }, /* 38.4 MHz */
|
|
};
|
|
|
|
/**
|
|
* @brief Initialize CORE DPLL for OMAP36x
|
|
*
|
|
* @param[in] cpu_rev - Silicon revision
|
|
* @param[in] clk_sel - Clock selection used as index into the dpll table
|
|
*/
|
|
static void init_core_dpll_36x(u32 cpu_rev, u32 clk_sel)
|
|
{
|
|
struct dpll_param *dp = core_dpll_param_36x;
|
|
|
|
dp += clk_sel;
|
|
|
|
if (running_in_sram()) {
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL), 0, 3, PLL_FAST_RELOCK_BYPASS);
|
|
wait_on_value((0x1 << 0), 0, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
|
|
|
|
/* CM_CLKSEL1_EMU[DIV_DPLL3] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_EMU), 16, 5, CORE_M3X2);
|
|
|
|
/* M2 (CORE_DPLL_CLKOUT_DIV): CM_CLKSEL1_PLL[27:31] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL), 27, 5, dp->m2);
|
|
|
|
/* M (CORE_DPLL_MULT): CM_CLKSEL1_PLL[16:26] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL), 16, 11, dp->m);
|
|
|
|
/* N (CORE_DPLL_DIV): CM_CLKSEL1_PLL[8:14] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL), 8, 7, dp->n);
|
|
|
|
/* Set source CM_96M_FCLK: CM_CLKSEL1_PLL[6] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL), 6, 1, 0);
|
|
|
|
sr32(OMAP3_CM_REG(CLKSEL_CORE), 8, 4, CORE_SSI_DIV);
|
|
sr32(OMAP3_CM_REG(CLKSEL_CORE), 4, 2, CORE_FUSB_DIV);
|
|
sr32(OMAP3_CM_REG(CLKSEL_CORE), 2, 2, CORE_L4_DIV);
|
|
sr32(OMAP3_CM_REG(CLKSEL_CORE), 0, 2, CORE_L3_DIV);
|
|
sr32(OMAP3_CM_REG(CLKSEL_GFX), 0, 3, GFX_DIV_36X);
|
|
sr32(OMAP3_CM_REG(CLKSEL_WKUP), 1, 2, WKUP_RSM);
|
|
|
|
/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL), 4, 4, dp->fsel);
|
|
|
|
/* Lock Mode */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL), 0, 3, PLL_LOCK);
|
|
wait_on_value((0x1 << 0), 1, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
|
|
} else if (running_in_flash()) {
|
|
/***Oopps.. Wrong .config!! *****/
|
|
hang();
|
|
}
|
|
}
|
|
|
|
/* FIXME: All values correspond to 26MHz only */
|
|
static struct dpll_param_per_36x per_dpll_param_36x[] = {
|
|
{ .m = 0x1B0, .n = 0x0C, .m2 = 9, .m3 = 0x10, .m4 = 9, .m5 = 4, .m6 = 3, .m2div = 1, }, /* 12 MHz */
|
|
{ .m = 0x1B0, .n = 0x0C, .m2 = 9, .m3 = 0x10, .m4 = 9, .m5 = 4, .m6 = 3, .m2div = 1, }, /* 13 MHz */
|
|
{ .m = 0x1B0, .n = 0x0C, .m2 = 9, .m3 = 0x10, .m4 = 9, .m5 = 4, .m6 = 3, .m2div = 1, }, /* 19.2 MHz */
|
|
{ .m = 0x1B0, .n = 0x0C, .m2 = 9, .m3 = 0x10, .m4 = 9, .m5 = 4, .m6 = 3, .m2div = 1, }, /* 26 MHz */
|
|
{ .m = 0x1B0, .n = 0x0C, .m2 = 9, .m3 = 0x10, .m4 = 9, .m5 = 4, .m6 = 3, .m2div = 1, }, /* 38.4 MHz */
|
|
};
|
|
|
|
/**
|
|
* @brief Initialize PER DPLL for OMAP36x
|
|
*
|
|
* @param[in] cpu_rev - Silicon revision
|
|
* @param[in] clk_sel - Clock selection used as index into the dpll table
|
|
*/
|
|
static void init_per_dpll_36x(u32 cpu_rev, u32 clk_sel)
|
|
{
|
|
struct dpll_param_per_36x *dp = per_dpll_param_36x;
|
|
|
|
dp += clk_sel;
|
|
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL), 16, 3, PLL_STOP);
|
|
wait_on_value((0x1 << 1), 0, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
|
|
|
|
/* Set M6 (DIV_DPLL4): CM_CLKSEL1_EMU[24:29] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_EMU), 24, 6, dp->m6);
|
|
|
|
/* Set M5 (CLKSEL_CAM): CM_CLKSEL_CAM[0:5] */
|
|
sr32(OMAP3_CM_REG(CLKSEL_CAM), 0, 6, dp->m5);
|
|
|
|
/* Set M4 (CLKSEL_DSS1): CM_CLKSEL_DSS[0:5] */
|
|
sr32(OMAP3_CM_REG(CLKSEL_DSS), 0, 6, dp->m4);
|
|
|
|
/* Set M3 (CLKSEL_DSS2): CM_CLKSEL_DSS[8:13] */
|
|
sr32(OMAP3_CM_REG(CLKSEL_DSS), 8, 6, dp->m3);
|
|
|
|
/* Set M2: CM_CLKSEL3_PLL[0:4] */
|
|
sr32(OMAP3_CM_REG(CLKSEL3_PLL), 0, 5, dp->m2);
|
|
|
|
/* M (PERIPH_DPLL_MULT): CM_CLKSEL2_PLL[8:19] */
|
|
sr32(OMAP3_CM_REG(CLKSEL2_PLL), 8, 12, dp->m);
|
|
|
|
/* N (PERIPH_DPLL_DIV): CM_CLKSEL2_PLL[0:6] */
|
|
sr32(OMAP3_CM_REG(CLKSEL2_PLL), 0, 7, dp->n);
|
|
|
|
/* M2DIV (CLKSEL_96M): CM_CLKSEL_CORE[12:13] */
|
|
sr32(OMAP3_CM_REG(CLKSEL_CORE), 12, 2, dp->m2div);
|
|
|
|
/* LOCK MODE (EN_PERIPH_DPLL): CM_CLKEN_PLL[16:18] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL), 16, 3, PLL_LOCK);
|
|
wait_on_value((0x1 << 1), 2, OMAP3_CM_REG(IDLEST_CKGEN), LDELAY);
|
|
}
|
|
|
|
/* FIXME: All values correspond to 26MHz only */
|
|
static struct dpll_param mpu_dpll_param_36x[] = {
|
|
{ .m = 0x12C, .n = 0x0C, .fsel = 0x00, .m2 = 0x01, }, /* 12 MHz */
|
|
{ .m = 0x12C, .n = 0x0C, .fsel = 0x00, .m2 = 0x01, }, /* 13 MHz */
|
|
{ .m = 0x12C, .n = 0x0C, .fsel = 0x00, .m2 = 0x01, }, /* 19.2 MHz */
|
|
{ .m = 0x12C, .n = 0x0C, .fsel = 0x00, .m2 = 0x01, }, /* 26 MHz */
|
|
{ .m = 0x12C, .n = 0x0C, .fsel = 0x00, .m2 = 0x01, }, /* 38.4 MHz */
|
|
};
|
|
|
|
/**
|
|
* @brief Initialize MPU DPLL for OMAP36x
|
|
*
|
|
* @param[in] cpu_rev - Silicon revision
|
|
* @param[in] clk_sel - Clock selection used as index into the dpll table
|
|
*/
|
|
static void init_mpu_dpll_36x(u32 cpu_rev, u32 clk_sel)
|
|
{
|
|
struct dpll_param *dp = mpu_dpll_param_36x;
|
|
|
|
dp += clk_sel;
|
|
|
|
/* M2 (MPU_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_MPU[0:4] */
|
|
sr32(OMAP3_CM_REG(CLKSEL2_PLL_MPU), 0, 5, dp->m2);
|
|
|
|
/* M (MPU_DPLL_MULT) : CM_CLKSEL2_PLL_MPU[8:18] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL_MPU), 8, 11, dp->m);
|
|
|
|
/* N (MPU_DPLL_DIV) : CM_CLKSEL2_PLL_MPU[0:6] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL_MPU), 0, 7, dp->n);
|
|
|
|
/* FREQSEL (MPU_DPLL_FREQSEL) : CM_CLKEN_PLL_MPU[4:7] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL_MPU), 4, 4, dp->fsel);
|
|
}
|
|
|
|
/* FIXME: All values correspond to 26MHz only */
|
|
static struct dpll_param iva_dpll_param_36x[] = {
|
|
{ .m = 0x00A, .n = 0x00, .fsel = 0x00, .m2 = 0x01, }, /* 12 MHz */
|
|
{ .m = 0x00A, .n = 0x00, .fsel = 0x00, .m2 = 0x01, }, /* 13 MHz */
|
|
{ .m = 0x00A, .n = 0x00, .fsel = 0x00, .m2 = 0x01, }, /* 19.2 MHz */
|
|
{ .m = 0x00A, .n = 0x00, .fsel = 0x00, .m2 = 0x01, }, /* 26 MHz */
|
|
{ .m = 0x00A, .n = 0x00, .fsel = 0x00, .m2 = 0x01, }, /* 38.4 MHz */
|
|
};
|
|
|
|
/**
|
|
* @brief Initialize IVA DPLL for OMAP36x
|
|
*
|
|
* @param[in] cpu_rev - Silicon revision
|
|
* @param[in] clk_sel - Clock selection used as index into the dpll table
|
|
*/
|
|
static void init_iva_dpll_36x(u32 cpu_rev, u32 clk_sel)
|
|
{
|
|
struct dpll_param *dp = iva_dpll_param_36x;
|
|
|
|
dp += clk_sel;
|
|
|
|
/* EN_IVA2_DPLL : CM_CLKEN_PLL_IVA2[0:2] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_STOP);
|
|
wait_on_value((0x1 << 0), 0, OMAP3_CM_REG(IDLEST_PLL_IVA2), LDELAY);
|
|
|
|
/* M2 (IVA2_DPLL_CLKOUT_DIV) : CM_CLKSEL2_PLL_IVA2[0:4] */
|
|
sr32(OMAP3_CM_REG(CLKSEL2_PLL_IVA2), 0, 5, dp->m2);
|
|
|
|
/* M (IVA2_DPLL_MULT) : CM_CLKSEL1_PLL_IVA2[8:18] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL_IVA2), 8, 11, dp->m);
|
|
|
|
/* N (IVA2_DPLL_DIV) : CM_CLKSEL1_PLL_IVA2[0:6] */
|
|
sr32(OMAP3_CM_REG(CLKSEL1_PLL_IVA2), 0, 7, dp->n);
|
|
|
|
/* FREQSEL (IVA2_DPLL_FREQSEL) : CM_CLKEN_PLL_IVA2[4:7] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL_IVA2), 4, 4, dp->fsel);
|
|
|
|
/* LOCK (MODE (EN_IVA2_DPLL) : CM_CLKEN_PLL_IVA2[0:2] */
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL_IVA2), 0, 3, PLL_LOCK);
|
|
wait_on_value((0x1 << 0), 1, OMAP3_CM_REG(IDLEST_PLL_IVA2), LDELAY);
|
|
}
|
|
|
|
/**
|
|
* @brief Inits clocks for PRCM
|
|
*
|
|
* This is called from SRAM
|
|
*
|
|
* @return void
|
|
*/
|
|
void prcm_init(void)
|
|
{
|
|
u32 osc_clk = 0, sys_clkin_sel = 0;
|
|
u32 cpu_type = get_cpu_type();
|
|
u32 cpu_rev = get_cpu_rev();
|
|
u32 clk_index;
|
|
|
|
/* Gauge the input clock speed and find out the sys_clkin_sel
|
|
* value corresponding to the input clock.
|
|
*/
|
|
osc_clk = get_osc_clk_speed();
|
|
get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
|
|
/* set input crystal speed */
|
|
sr32(OMAP3_PRM_REG(CLKSEL), 0, 3, sys_clkin_sel);
|
|
|
|
/*
|
|
* OMAP3430:
|
|
* If the input clock is greater than 19.2M always divide/2
|
|
* OMAP3630:
|
|
* DDR corruption was observed on exit from OFF mode, when
|
|
* sys clock is lower than 26M. As workaround, it is maintained
|
|
* at 26M.
|
|
*/
|
|
if ((cpu_type != CPU_3630) && (sys_clkin_sel > 2)) {
|
|
/* input clock divider */
|
|
sr32(OMAP3_PRM_REG(CLKSRC_CTRL), 6, 2, 2);
|
|
clk_index = sys_clkin_sel / 2;
|
|
} else {
|
|
/* input clock divider */
|
|
sr32(OMAP3_PRM_REG(CLKSRC_CTRL), 6, 2, 1);
|
|
clk_index = sys_clkin_sel;
|
|
}
|
|
|
|
/*
|
|
* Unlock the MPU PLL. Run slow while clocks are being configured.
|
|
*/
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL_MPU), 0, 3, PLL_LOW_POWER_BYPASS);
|
|
wait_on_value((0x1 << 0), 0, OMAP3_CM_REG(IDLEST_PLL_MPU), LDELAY);
|
|
|
|
if (cpu_type == CPU_3430) {
|
|
init_core_dpll_34x(cpu_rev, clk_index);
|
|
init_per_dpll_34x(cpu_rev, clk_index);
|
|
init_mpu_dpll_34x(cpu_rev, clk_index);
|
|
init_iva_dpll_34x(cpu_rev, clk_index);
|
|
}
|
|
else if (cpu_type == CPU_3630) {
|
|
init_core_dpll_36x(cpu_rev, clk_index);
|
|
init_per_dpll_36x(cpu_rev, clk_index);
|
|
init_mpu_dpll_36x(cpu_rev, clk_index);
|
|
init_iva_dpll_36x(cpu_rev, clk_index);
|
|
}
|
|
else {
|
|
/* Unknown CPU */
|
|
hang();
|
|
}
|
|
|
|
/*
|
|
* Clock configuration complete. Lock MPU PLL.
|
|
*/
|
|
sr32(OMAP3_CM_REG(CLKEN_PLL_MPU), 0, 3, PLL_LOCK);
|
|
wait_on_value((0x1 << 0), 1, OMAP3_CM_REG(IDLEST_PLL_MPU), LDELAY);
|
|
|
|
/* Set up GPTimers to sys_clk source only */
|
|
sr32(OMAP3_CM_REG(CLKSEL_PER), 0, 8, 0xff);
|
|
sr32(OMAP3_CM_REG(CLKSEL_WKUP), 0, 1, 1);
|
|
|
|
sdelay(5000);
|
|
|
|
/* Enable Peripheral Clocks */
|
|
per_clocks_enable();
|
|
}
|
|
|
|
/**
|
|
* @brief Enable the clks & power for perifs
|
|
*
|
|
* @return void
|
|
*/
|
|
static void per_clocks_enable(void)
|
|
{
|
|
/* Enable GP2 timer. */
|
|
sr32(OMAP3_CM_REG(CLKSEL_PER), 0, 1, 0x1); /* GPT2 = sys clk */
|
|
sr32(OMAP3_CM_REG(ICLKEN_PER), 3, 1, 0x1); /* ICKen GPT2 */
|
|
sr32(OMAP3_CM_REG(FCLKEN_PER), 3, 1, 0x1); /* FCKen GPT2 */
|
|
/* Enable the ICLK for 32K Sync Timer as its used in udelay */
|
|
sr32(OMAP3_CM_REG(ICLKEN_WKUP), 2, 1, 0x1);
|
|
|
|
#define FCK_IVA2_ON 0x00000001
|
|
#define FCK_CORE1_ON 0x03fffe29
|
|
#define ICK_CORE1_ON 0x3ffffffb
|
|
#define ICK_CORE2_ON 0x0000001f
|
|
#define FCK_WKUP_ON 0x000000e9
|
|
#define ICK_WKUP_ON 0x0000003f
|
|
#define FCK_DSS_ON 0x00000005 /* tv+dss1 (not dss2) */
|
|
#define ICK_DSS_ON 0x00000001
|
|
#define FCK_CAM_ON 0x00000001
|
|
#define ICK_CAM_ON 0x00000001
|
|
#define FCK_PER_ON 0x0003ffff
|
|
#define ICK_PER_ON 0x0003ffff
|
|
sr32(OMAP3_CM_REG(FCLKEN_IVA2), 0, 32, FCK_IVA2_ON);
|
|
sr32(OMAP3_CM_REG(FCLKEN1_CORE), 0, 32, FCK_CORE1_ON);
|
|
sr32(OMAP3_CM_REG(ICLKEN1_CORE), 0, 32, ICK_CORE1_ON);
|
|
sr32(OMAP3_CM_REG(ICLKEN2_CORE), 0, 32, ICK_CORE2_ON);
|
|
sr32(OMAP3_CM_REG(FCLKEN_WKUP), 0, 32, FCK_WKUP_ON);
|
|
sr32(OMAP3_CM_REG(ICLKEN_WKUP), 0, 32, ICK_WKUP_ON);
|
|
sr32(OMAP3_CM_REG(FCLKEN_DSS), 0, 32, FCK_DSS_ON);
|
|
sr32(OMAP3_CM_REG(ICLKEN_DSS), 0, 32, ICK_DSS_ON);
|
|
sr32(OMAP3_CM_REG(FCLKEN_CAM), 0, 32, FCK_CAM_ON);
|
|
sr32(OMAP3_CM_REG(ICLKEN_CAM), 0, 32, ICK_CAM_ON);
|
|
sr32(OMAP3_CM_REG(FCLKEN_PER), 0, 32, FCK_PER_ON);
|
|
sr32(OMAP3_CM_REG(ICLKEN_PER), 0, 32, ICK_PER_ON);
|
|
|
|
/* Settle down my friend */
|
|
sdelay(1000);
|
|
}
|