ba685b2a8c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
216 lines
5.4 KiB
C
216 lines
5.4 KiB
C
/*
|
|
* arch/arm/mach-at91/at91sam9263_devices.c
|
|
*
|
|
* Copyright (C) 2006 Atmel
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/armlinux.h>
|
|
#include <asm/hardware.h>
|
|
#include <mach/at91_pmc.h>
|
|
#include <mach/at91sam9263_matrix.h>
|
|
#include <mach/board.h>
|
|
#include <mach/gpio.h>
|
|
#include <mach/io.h>
|
|
|
|
#include "generic.h"
|
|
|
|
static struct memory_platform_data ram_pdata = {
|
|
.name = "ram0",
|
|
.flags = DEVFS_RDWR,
|
|
};
|
|
|
|
static struct device_d sdram_dev = {
|
|
.id = -1,
|
|
.name = "mem",
|
|
.map_base = AT91_CHIPSELECT_1,
|
|
.platform_data = &ram_pdata,
|
|
};
|
|
|
|
void at91_add_device_sdram(u32 size)
|
|
{
|
|
sdram_dev.size = size;
|
|
register_device(&sdram_dev);
|
|
armlinux_add_dram(&sdram_dev);
|
|
}
|
|
|
|
#if defined(CONFIG_DRIVER_NET_MACB)
|
|
static struct device_d macb_dev = {
|
|
.id = -1,
|
|
.name = "macb",
|
|
.map_base = AT91SAM9263_BASE_EMAC,
|
|
.size = 0x1000,
|
|
};
|
|
|
|
void at91_add_device_eth(struct at91_ether_platform_data *data)
|
|
{
|
|
if (!data)
|
|
return;
|
|
|
|
at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
|
|
at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
|
|
at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
|
|
at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
|
|
at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
|
|
at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
|
|
at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
|
|
at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
|
|
at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
|
|
at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
|
|
|
|
if (!(data->flags & AT91SAM_ETHER_RMII)) {
|
|
at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
|
|
at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
|
|
at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
|
|
at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
|
|
at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
|
|
at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
|
|
at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
|
|
at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
|
|
}
|
|
|
|
macb_dev.platform_data = data;
|
|
register_device(&macb_dev);
|
|
}
|
|
#else
|
|
void at91_add_device_eth(struct at91_ether_platform_data *data) {}
|
|
#endif
|
|
|
|
#if defined(CONFIG_NAND_ATMEL)
|
|
static struct device_d nand_dev = {
|
|
.id = -1,
|
|
.name = "atmel_nand",
|
|
.map_base = AT91_CHIPSELECT_3,
|
|
.size = 0x10,
|
|
};
|
|
|
|
void at91_add_device_nand(struct atmel_nand_data *data)
|
|
{
|
|
unsigned long csa;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
|
|
at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
|
|
|
|
/* enable pin */
|
|
if (data->enable_pin)
|
|
at91_set_gpio_output(data->enable_pin, 1);
|
|
|
|
/* ready/busy pin */
|
|
if (data->rdy_pin)
|
|
at91_set_gpio_input(data->rdy_pin, 1);
|
|
|
|
/* card detect pin */
|
|
if (data->det_pin)
|
|
at91_set_gpio_input(data->det_pin, 1);
|
|
|
|
nand_dev.platform_data = data;
|
|
register_device(&nand_dev);
|
|
}
|
|
#else
|
|
void at91_add_device_nand(struct atmel_nand_data *data) {}
|
|
#endif
|
|
|
|
static struct device_d dbgu_serial_device = {
|
|
.id = 0,
|
|
.name = "atmel_serial",
|
|
.map_base = (AT91_BASE_SYS + AT91_DBGU),
|
|
.size = 4096,
|
|
};
|
|
|
|
static inline void configure_dbgu_pins(void)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
|
|
at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
|
|
}
|
|
|
|
static struct device_d uart0_serial_device = {
|
|
.id = 1,
|
|
.name = "atmel_serial",
|
|
.map_base = AT91SAM9263_BASE_US0,
|
|
.size = 4096,
|
|
};
|
|
|
|
static inline void configure_usart0_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
|
|
at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
|
|
}
|
|
|
|
static struct device_d uart1_serial_device = {
|
|
.id = 2,
|
|
.name = "atmel_serial",
|
|
.map_base = AT91SAM9263_BASE_US1,
|
|
.size = 4096,
|
|
};
|
|
|
|
static inline void configure_usart1_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
|
|
}
|
|
|
|
static struct device_d uart2_serial_device = {
|
|
.id = 3,
|
|
.name = "atmel_serial",
|
|
.map_base = AT91SAM9263_BASE_US2,
|
|
.size = 4096,
|
|
};
|
|
|
|
static inline void configure_usart2_pins(unsigned pins)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
|
|
at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
|
|
|
|
if (pins & ATMEL_UART_RTS)
|
|
at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
|
|
if (pins & ATMEL_UART_CTS)
|
|
at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
|
|
}
|
|
|
|
void at91_register_uart(unsigned id, unsigned pins)
|
|
{
|
|
switch (id) {
|
|
case 0: /* DBGU */
|
|
configure_dbgu_pins();
|
|
at91_clock_associate("mck", &dbgu_serial_device, "usart");
|
|
register_device(&dbgu_serial_device);
|
|
break;
|
|
case AT91SAM9263_ID_US0:
|
|
configure_usart0_pins(pins);
|
|
at91_clock_associate("usart0_clk", &uart0_serial_device, "usart");
|
|
register_device(&uart0_serial_device);
|
|
break;
|
|
case AT91SAM9263_ID_US1:
|
|
configure_usart1_pins(pins);
|
|
at91_clock_associate("usart1_clk", &uart1_serial_device, "usart");
|
|
register_device(&uart1_serial_device);
|
|
break;
|
|
case AT91SAM9263_ID_US2:
|
|
configure_usart2_pins(pins);
|
|
at91_clock_associate("usart2_clk", &uart2_serial_device, "usart");
|
|
register_device(&uart2_serial_device);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
}
|