This patch adds support to detect the different OMAP36XX silicon revisions. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
520 lines
12 KiB
C
520 lines
12 KiB
C
/**
|
|
* @file
|
|
* @brief Provide Generic implementations for OMAP3 architecture
|
|
*
|
|
* FileName: arch/arm/mach-omap/omap3_generic.c
|
|
*
|
|
* This file contains the generic implementations of various OMAP3
|
|
* relevant functions
|
|
* For more info on OMAP34XX, see http://focus.ti.com/pdfs/wtbu/swpu114g.pdf
|
|
*
|
|
* Important one is @ref a_init which is architecture init code.
|
|
* The implemented functions are present in sys_info.h
|
|
*
|
|
* Originally from http://linux.omap.com/pub/bootloader/3430sdp/u-boot-v1.tar.gz
|
|
*/
|
|
/*
|
|
* (C) Copyright 2006-2008
|
|
* Texas Instruments, <www.ti.com>
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Nishanth Menon <x0nishan@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <common.h>
|
|
#include <init.h>
|
|
#include <asm/io.h>
|
|
#include <mach/silicon.h>
|
|
#include <mach/gpmc.h>
|
|
#include <mach/sdrc.h>
|
|
#include <mach/control.h>
|
|
#include <mach/omap3-smx.h>
|
|
#include <mach/clocks.h>
|
|
#include <mach/wdt.h>
|
|
#include <mach/sys_info.h>
|
|
#include <mach/syslib.h>
|
|
|
|
/**
|
|
* @brief Reset the CPU
|
|
*
|
|
* In case of crashes, reset the CPU
|
|
*
|
|
* @param addr Cause of crash
|
|
*
|
|
* @return void
|
|
*/
|
|
void __noreturn reset_cpu(unsigned long addr)
|
|
{
|
|
/* FIXME: Enable WDT and cause reset */
|
|
hang();
|
|
}
|
|
EXPORT_SYMBOL(reset_cpu);
|
|
|
|
/**
|
|
* @brief Low level CPU type
|
|
*
|
|
* @return Detected CPU type
|
|
*/
|
|
u32 get_cpu_type(void)
|
|
{
|
|
u32 idcode_val;
|
|
u16 hawkeye;
|
|
|
|
idcode_val = readl(IDCODE_REG);
|
|
|
|
hawkeye = get_hawkeye(idcode_val);
|
|
|
|
if (hawkeye == OMAP_HAWKEYE_34XX)
|
|
return CPU_3430;
|
|
|
|
if (hawkeye == OMAP_HAWKEYE_36XX)
|
|
return CPU_3630;
|
|
|
|
/*
|
|
* Fallback to OMAP3430 as default.
|
|
*/
|
|
return CPU_3430;
|
|
}
|
|
|
|
/**
|
|
* @brief Extract the OMAP ES revision
|
|
*
|
|
* The significance of the CPU revision depends upon the cpu type.
|
|
* Latest known revision is considered default.
|
|
*
|
|
* @return silicon version
|
|
*/
|
|
u32 get_cpu_rev(void)
|
|
{
|
|
u32 idcode_val;
|
|
u32 version, retval;
|
|
|
|
idcode_val = readl(IDCODE_REG);
|
|
|
|
version = get_version(idcode_val);
|
|
|
|
switch (get_cpu_type()) {
|
|
case CPU_3630:
|
|
switch (version) {
|
|
case 0:
|
|
retval = OMAP36XX_ES1;
|
|
break;
|
|
case 1:
|
|
retval = OMAP36XX_ES1_1;
|
|
break;
|
|
case 2:
|
|
/*
|
|
* Fall through the default case.
|
|
*/
|
|
default:
|
|
retval = OMAP36XX_ES1_2;
|
|
}
|
|
break;
|
|
case CPU_3430:
|
|
/*
|
|
* Same as default case
|
|
*/
|
|
default:
|
|
/*
|
|
* On OMAP3430 ES1.0 the IDCODE register is not exposed on L4.
|
|
* Use CPU ID to check for the same.
|
|
*/
|
|
__asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r"(retval));
|
|
if ((retval & 0xf) == 0x0) {
|
|
retval = OMAP34XX_ES1;
|
|
} else {
|
|
switch (version) {
|
|
case 0: /* This field was not set in early samples */
|
|
case 1:
|
|
retval = OMAP34XX_ES2;
|
|
break;
|
|
case 2:
|
|
retval = OMAP34XX_ES2_1;
|
|
break;
|
|
case 3:
|
|
retval = OMAP34XX_ES3;
|
|
break;
|
|
case 4:
|
|
/*
|
|
* Same as default case
|
|
*/
|
|
default:
|
|
retval = OMAP34XX_ES3_1;
|
|
}
|
|
}
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
/**
|
|
* @brief Get size of chip select 0/1
|
|
*
|
|
* @param[in] offset give the offset if we need CS1
|
|
*
|
|
* @return return the sdram size.
|
|
*/
|
|
u32 get_sdr_cs_size(u32 offset)
|
|
{
|
|
u32 size;
|
|
/* get ram size field */
|
|
size = readl(SDRC_REG(MCFG_0) + offset) >> 8;
|
|
size &= 0x3FF; /* remove unwanted bits */
|
|
size *= 2 * (1024 * 1024); /* find size in MB */
|
|
return size;
|
|
}
|
|
|
|
/**
|
|
* @brief Get the initial SYSBOOT value
|
|
*
|
|
* SYSBOOT is useful to know which state OMAP booted from.
|
|
*
|
|
* @return - Return the value of SYSBOOT.
|
|
*/
|
|
inline u32 get_sysboot_value(void)
|
|
{
|
|
return (0x0000003F & readl(CONTROL_REG(STATUS)));
|
|
}
|
|
|
|
/**
|
|
* @brief Return the current CS0 base address
|
|
*
|
|
* Return current address hardware will be
|
|
* fetching from. The below effectively gives what is correct, its a bit
|
|
* mis-leading compared to the TRM. For the most general case the mask
|
|
* needs to be also taken into account this does work in practice.
|
|
*
|
|
* @return base address
|
|
*/
|
|
u32 get_gpmc0_base(void)
|
|
{
|
|
u32 b;
|
|
b = readl(GPMC_REG(CONFIG7_0));
|
|
b &= 0x1F; /* keep base [5:0] */
|
|
b = b << 24; /* ret 0x0b000000 */
|
|
return b;
|
|
}
|
|
|
|
/**
|
|
* @brief Get the upper address of current execution
|
|
*
|
|
* we can use this to figure out if we are running in SRAM /
|
|
* XIP Flash or in SDRAM
|
|
*
|
|
* @return base address
|
|
*/
|
|
u32 get_base(void)
|
|
{
|
|
u32 val;
|
|
__asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
|
|
val &= 0xF0000000;
|
|
val >>= 28;
|
|
return val;
|
|
}
|
|
|
|
/**
|
|
* @brief Are we running in Flash XIP?
|
|
*
|
|
* If the base is in GPMC address space, we probably are!
|
|
*
|
|
* @return 1 if we are running in XIP mode, else return 0
|
|
*/
|
|
u32 running_in_flash(void)
|
|
{
|
|
if (get_base() < 4)
|
|
return 1; /* in flash */
|
|
return 0; /* running in SRAM or SDRAM */
|
|
}
|
|
|
|
/**
|
|
* @brief Are we running in OMAP internal SRAM?
|
|
*
|
|
* If in SRAM address, then yes!
|
|
*
|
|
* @return 1 if we are running in SRAM, else return 0
|
|
*/
|
|
u32 running_in_sram(void)
|
|
{
|
|
if (get_base() == 4)
|
|
return 1; /* in SRAM */
|
|
return 0; /* running in FLASH or SDRAM */
|
|
}
|
|
|
|
/**
|
|
* @brief Are we running in SDRAM?
|
|
*
|
|
* if we are not in GPMC nor in SRAM address space,
|
|
* we are in SDRAM execution area
|
|
*
|
|
* @return 1 if we are running from SDRAM, else return 0
|
|
*/
|
|
u32 running_in_sdram(void)
|
|
{
|
|
if (get_base() > 4)
|
|
return 1; /* in sdram */
|
|
return 0; /* running in SRAM or FLASH */
|
|
}
|
|
EXPORT_SYMBOL(running_in_sdram);
|
|
|
|
/**
|
|
* @brief Is this an XIP type device or a stream one
|
|
*
|
|
* Sysboot bits 4-0 specify type. Bit 5, sys mem/perif
|
|
*
|
|
* @return Boot type
|
|
*/
|
|
u32 get_boot_type(void)
|
|
{
|
|
u32 v;
|
|
v = get_sysboot_value() & ((0x1 << 4) | (0x1 << 3) | (0x1 << 2) |
|
|
(0x1 << 1) | (0x1 << 0));
|
|
return v;
|
|
}
|
|
|
|
/**
|
|
* @brief What type of device are we?
|
|
*
|
|
* are we on a GP/HS/EMU/TEST device?
|
|
*
|
|
* @return device type
|
|
*/
|
|
u32 get_device_type(void)
|
|
{
|
|
int mode;
|
|
mode = readl(CONTROL_REG(STATUS)) & (DEVICE_MASK);
|
|
return (mode >>= 8);
|
|
}
|
|
|
|
/**
|
|
* @brief Setup security registers for access
|
|
*
|
|
* This can be done for GP Device only. for HS/EMU devices, read TRM.
|
|
*
|
|
* @return void
|
|
*/
|
|
static void secure_unlock_mem(void)
|
|
{
|
|
/* Permission values for registers -Full fledged permissions to all */
|
|
#define UNLOCK_1 0xFFFFFFFF
|
|
#define UNLOCK_2 0x00000000
|
|
#define UNLOCK_3 0x0000FFFF
|
|
/* Protection Module Register Target APE (PM_RT) */
|
|
writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1);
|
|
writel(UNLOCK_1, RT_READ_PERMISSION_0);
|
|
writel(UNLOCK_1, RT_WRITE_PERMISSION_0);
|
|
writel(UNLOCK_2, RT_ADDR_MATCH_1);
|
|
|
|
writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0);
|
|
writel(UNLOCK_3, GPMC_READ_PERMISSION_0);
|
|
writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0);
|
|
|
|
writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0);
|
|
writel(UNLOCK_3, OCM_READ_PERMISSION_0);
|
|
writel(UNLOCK_3, OCM_WRITE_PERMISSION_0);
|
|
writel(UNLOCK_2, OCM_ADDR_MATCH_2);
|
|
|
|
/* IVA Changes */
|
|
writel(UNLOCK_3, IVA2_REQ_INFO_PERMISSION_0);
|
|
writel(UNLOCK_3, IVA2_READ_PERMISSION_0);
|
|
writel(UNLOCK_3, IVA2_WRITE_PERMISSION_0);
|
|
|
|
writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */
|
|
}
|
|
|
|
/**
|
|
* @brief Come out of secure mode
|
|
* If chip is EMU and boot type is external configure
|
|
* secure registers and exit secure world general use.
|
|
*
|
|
* @return void
|
|
*/
|
|
static void secureworld_exit(void)
|
|
{
|
|
unsigned long i;
|
|
|
|
/* configrue non-secure access control register */
|
|
__asm__ __volatile__("mrc p15, 0, %0, c1, c1, 2":"=r"(i));
|
|
/* enabling co-processor CP10 and CP11 accesses in NS world */
|
|
__asm__ __volatile__("orr %0, %0, #0xC00":"=r"(i));
|
|
/* allow allocation of locked TLBs and L2 lines in NS world */
|
|
/* allow use of PLE registers in NS world also */
|
|
__asm__ __volatile__("orr %0, %0, #0x70000":"=r"(i));
|
|
__asm__ __volatile__("mcr p15, 0, %0, c1, c1, 2":"=r"(i));
|
|
|
|
/* Enable ASA in ACR register */
|
|
__asm__ __volatile__("mrc p15, 0, %0, c1, c0, 1":"=r"(i));
|
|
__asm__ __volatile__("orr %0, %0, #0x10":"=r"(i));
|
|
__asm__ __volatile__("mcr p15, 0, %0, c1, c0, 1":"=r"(i));
|
|
|
|
/* Exiting secure world */
|
|
__asm__ __volatile__("mrc p15, 0, %0, c1, c1, 0":"=r"(i));
|
|
__asm__ __volatile__("orr %0, %0, #0x31":"=r"(i));
|
|
__asm__ __volatile__("mcr p15, 0, %0, c1, c1, 0":"=r"(i));
|
|
}
|
|
|
|
/**
|
|
* @brief Shut down the watchdogs
|
|
*
|
|
* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is
|
|
* either taken care of by ROM (HS/EMU) or not accessible (GP).
|
|
* We need to take care of WD2-MPU or take a PRCM reset. WD3
|
|
* should not be running and does not generate a PRCM reset.
|
|
*
|
|
* @return void
|
|
*/
|
|
static void watchdog_init(void)
|
|
{
|
|
int pending = 1;
|
|
|
|
sr32(CM_REG(FCLKEN_WKUP), 5, 1, 1);
|
|
sr32(CM_REG(ICLKEN_WKUP), 5, 1, 1);
|
|
wait_on_value((0x1 << 5), 0x20, CM_REG(IDLEST_WKUP), 5);
|
|
|
|
writel(WDT_DISABLE_CODE1, WDT_REG(WSPR));
|
|
|
|
do {
|
|
pending = readl(WDT_REG(WWPS));
|
|
} while (pending);
|
|
|
|
writel(WDT_DISABLE_CODE2, WDT_REG(WSPR));
|
|
}
|
|
|
|
/**
|
|
* @brief Write to AuxCR desired value using SMI.
|
|
* general use.
|
|
*
|
|
* @return void
|
|
*/
|
|
static void setup_auxcr(void)
|
|
{
|
|
unsigned long i;
|
|
volatile unsigned int j;
|
|
/* Save r0, r12 and restore them after usage */
|
|
__asm__ __volatile__("mov %0, r12":"=r"(j));
|
|
__asm__ __volatile__("mov %0, r0":"=r"(i));
|
|
|
|
/* GP Device ROM code API usage here */
|
|
/* r12 = AUXCR Write function and r0 value */
|
|
__asm__ __volatile__("mov r12, #0x3");
|
|
__asm__ __volatile__("mrc p15, 0, r0, c1, c0, 1");
|
|
/* Enabling ASA */
|
|
__asm__ __volatile__("orr r0, r0, #0x10");
|
|
/* SMI instruction to call ROM Code API */
|
|
__asm__ __volatile__(".word 0xE1600070");
|
|
__asm__ __volatile__("mov r0, %0":"=r"(i));
|
|
__asm__ __volatile__("mov r12, %0":"=r"(j));
|
|
}
|
|
|
|
/**
|
|
* @brief Try to unlock the SRAM for general use
|
|
*
|
|
* If chip is GP/EMU(special) type, unlock the SRAM for
|
|
* general use.
|
|
*
|
|
* @return void
|
|
*/
|
|
static void try_unlock_memory(void)
|
|
{
|
|
int mode;
|
|
int in_sdram = running_in_sdram();
|
|
|
|
/* if GP device unlock device SRAM for general use */
|
|
/* secure code breaks for Secure/Emulation device - HS/E/T */
|
|
mode = get_device_type();
|
|
if (mode == GP_DEVICE)
|
|
secure_unlock_mem();
|
|
/* If device is EMU and boot is XIP external booting
|
|
* Unlock firewalls and disable L2 and put chip
|
|
* out of secure world
|
|
*/
|
|
/* Assuming memories are unlocked by the demon who put us in SDRAM */
|
|
if ((mode <= EMU_DEVICE) && (get_boot_type() == 0x1F)
|
|
&& (!in_sdram)) {
|
|
secure_unlock_mem();
|
|
secureworld_exit();
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* @brief OMAP3 Architecture specific Initialization
|
|
*
|
|
* Does early system init of disabling the watchdog, enable
|
|
* memory and configuring the clocks.
|
|
*
|
|
* prcm_init is called only if CONFIG_OMAP3_CLOCK_CONFIG is defined.
|
|
* We depend on link time clean up to remove a_init if no caller exists.
|
|
*
|
|
* @warning Called path is with SRAM stack
|
|
*
|
|
* @return void
|
|
*/
|
|
void a_init(void)
|
|
{
|
|
watchdog_init();
|
|
|
|
try_unlock_memory();
|
|
|
|
/* Writing to AuxCR in barebox using SMI for GP DEV */
|
|
/* Currently SMI in Kernel on ES2 devices seems to have an isse
|
|
* Once that is resolved, we can postpone this config to kernel
|
|
*/
|
|
if (get_device_type() == GP_DEVICE)
|
|
setup_auxcr();
|
|
|
|
sdelay(100);
|
|
|
|
#ifdef CONFIG_OMAP3_CLOCK_CONFIG
|
|
prcm_init();
|
|
#endif
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief Uart port register read function for OMAP3
|
|
*
|
|
* @param base base address of UART
|
|
* @param reg_idx register index
|
|
*
|
|
* @return character read from register
|
|
*/
|
|
unsigned int omap_uart_read(unsigned long base, unsigned char reg_idx)
|
|
{
|
|
unsigned int *reg_addr = (unsigned int *)base;
|
|
reg_addr += reg_idx;
|
|
return readb(reg_addr);
|
|
}
|
|
EXPORT_SYMBOL(omap_uart_read);
|
|
|
|
/**
|
|
* @brief Uart port register write function for OMAP3
|
|
*
|
|
* @param val value to write
|
|
* @param base base address of UART
|
|
* @param reg_idx register index
|
|
*
|
|
* @return void
|
|
*/
|
|
void omap_uart_write(unsigned int val, unsigned long base,
|
|
unsigned char reg_idx)
|
|
{
|
|
unsigned int *reg_addr = (unsigned int *)base;
|
|
reg_addr += reg_idx;
|
|
writeb(val, reg_addr);
|
|
}
|
|
EXPORT_SYMBOL(omap_uart_write);
|