218 lines
8.1 KiB
Plaintext
218 lines
8.1 KiB
Plaintext
/** @mainpage Unified Bootloader
|
|
|
|
@section uboot_v2_intro Introduction
|
|
|
|
This is u2boot, our proposal for a next generation of the famous U-Boot
|
|
bootloader. U-Boot offers an excellent choice as a bootloader for
|
|
today's embedded systems, seen from a user's point of view.
|
|
Nevertheless, there are quite some design flaws which turned out over
|
|
the last years and we think that they cannot be solved in a production
|
|
tree. So this tree tries to do several things right - without caring
|
|
about losing support for old boards.
|
|
|
|
@par General features include:
|
|
|
|
- A posix based file API
|
|
- inside U-Boot the usual open/close/read/write/lseek functions are used.
|
|
This makes it familiar to everyone who has programmed under unix systems.
|
|
|
|
- usual shell commands like ls/cd/mkdir/echo/cat,...
|
|
|
|
- The environment is not a variable store anymore, but a file store. It has
|
|
currently some limitations, of course. The environment is not a real
|
|
read/write filesystem, it is more like a tar archive, or even more like
|
|
an ar archive, because it cannot handle directories. The saveenv command
|
|
saves the files under a certain directory (by default /env) in persistent
|
|
storage (by default /dev/env0). There is a counterpart called loadenv, too.
|
|
|
|
- Real filesystem support
|
|
- The loader starts up with mounting a ramdisk on /. Then a devfs is mounted
|
|
on /dev allowing the user (or shell commands) to access devices. Apart from
|
|
these two filesystems there is currently one filesystem ported: cramfs. One
|
|
can mount it with the usual mount command.
|
|
|
|
- device/driver model
|
|
- Devices are no longer described by defines in the config file. Instead
|
|
there are devices which can be registered in the board .c file or
|
|
dynamically allocated. Drivers will match upon the devices automatically.
|
|
|
|
- clocksource support
|
|
- Timekeeping has been simplified by the use of the Linux clocksource API.
|
|
Only one function is needed for a new board, no [gs]et_timer[masked]() or
|
|
reset_timer[masked]() functions.
|
|
|
|
- Kconfig and Kernel build system
|
|
- Only targets which are really needed get recompiled. Parallel builds are
|
|
no problem anymore. This also removes the need for many many ifdefs in
|
|
the code.
|
|
|
|
- simulation target
|
|
- U-Boot can be compiled to run under Linux. While this is rather useless
|
|
in real world this is a great debugging and development aid. New features
|
|
can be easily developped and tested on long train journeys and started
|
|
under gdb. There is a console driver for linux which emulates a serial
|
|
device and a tap based ethernet driver. Linux files can be mapped to
|
|
devices under U-Boot to emulate storage devices.
|
|
|
|
- device parameter support
|
|
- Each device can have a unlimited number of parameters. They can be accessed
|
|
on the command line with <devid>.<param>="...", for example
|
|
'eth0.ip=192.168.0.7' or 'echo $eth0.ip'
|
|
|
|
- initcalls
|
|
- hooks in the startup process can be archieved with *_initcall() directives
|
|
in each file.
|
|
|
|
- getopt
|
|
- There is a small getopt implementation. Some commands got really
|
|
complicated (both in code and in usage) due to the fact that U-Boot only
|
|
allowed positional parameters.
|
|
|
|
- editor
|
|
- Scripts can be edited with a small editor. This editor has no features
|
|
except the ones really needed: moving the cursor and typing characters.
|
|
|
|
@par Building U-Boot
|
|
|
|
U-Boot uses the Linux kernel's build system. It consists of two parts:
|
|
the makefile infrastructure (kbuild), plus a configuration system
|
|
(kconfig). So building U-Boot is very similar to building the Linux
|
|
kernel.
|
|
|
|
For the examples below, we use the User Mode U-Boot implementation, which
|
|
is a port of U-Boot to the Linux userspace. This makes it possible to
|
|
test drive the code without having real hardware. So for this test
|
|
scenario, ARCH=sandbox is the valid architecture selection. This currently
|
|
only works on ia32 hosts and partly on x86-64.
|
|
|
|
Selection of the architecture and the cross compiler can be done in two
|
|
ways. You can either specify it using the environment variables ARCH
|
|
and CROSS_COMPILE, or you can create the soft links cross_arch and
|
|
cross_compile pointing to your architecture and compiler. For ARCH=sandbox
|
|
we do not need a cross compiler so it is sufficient to specify the
|
|
architecture:
|
|
|
|
@code # ln -s sandbox cross_arch @endcode
|
|
|
|
In order to configure the various aspects of U-Boot, start the U-Boot
|
|
configuration system:
|
|
|
|
@code # make menuconfig @endcode
|
|
|
|
This command starts a menu box and lets you select all the different
|
|
options available for your architecture. Once the configuration was
|
|
finished (you can simulate this by using the standard demo config file
|
|
with 'make sandbox_defconfig'), there is a .config file in the toplevel
|
|
directory of the sourcode.
|
|
|
|
Once U-Boot is configured, we can start the compilation
|
|
|
|
@code # make @endcode
|
|
|
|
If everything goes well, the result is a file called uboot:
|
|
|
|
@code
|
|
# ls -l uboot
|
|
-rwxr-xr-x 1 rsc ptx 114073 Jun 26 22:34 uboot
|
|
@endcode
|
|
|
|
U-Boot usually needs an environment for storing the configuation data.
|
|
You can generate an environment using the example environment contained
|
|
in examples/environment:
|
|
|
|
@code # ./scripts/ubootenv -s -p 0x10000 examples/environment/ env.bin @endcode
|
|
|
|
To get some files to play with you can generate a cramfs image:
|
|
|
|
@code # mkcramfs somedir/ cramfs.bin @endcode
|
|
|
|
The U-Boot image is a normal Linux executable, so it can be started
|
|
just like every other program:
|
|
|
|
@code
|
|
# ./uboot -e env.bin -i cramfs.bin
|
|
|
|
U-Boot 2.0.0-trunk (Jun 26 2007 - 22:34:38)
|
|
|
|
loading environment from /dev/env0
|
|
uboot> /
|
|
@endcode
|
|
|
|
Specifying -[ie] <file> tells U-Boot to map the file as a device
|
|
under /dev. Files given with '-e' will appear as /dev/env[n]. Files
|
|
given with '-i' will appear as /dev/fd[n].
|
|
If U-Boot finds a valid configuration sector on /dev/env0 it will
|
|
load it to /env. It then executes /env/init if it exists. If you have
|
|
loaded the example environment U-Boot will show you a menu asking for
|
|
your settings.
|
|
|
|
If you have started U-Boot as root you will find a new tap device on your
|
|
host which you can configure using ifconfig. Once you configured U-Boots
|
|
network settings accordingly you can do a ping or tftpboot.
|
|
|
|
If you have mapped a cramfs image try mounting it with
|
|
|
|
@code
|
|
# mkdir /cram
|
|
# mount /dev/fd0 cramfs /cram
|
|
@endcode
|
|
|
|
Memory can be examined as usual using md/mw commands. They both understand
|
|
the -f <file> option to tell the commands that they should work on the
|
|
specified files instead of /dev/mem which holds the complete address space.
|
|
Note that if you call 'md /dev/fd0' (without -f) U-Boot will segfault on
|
|
the host, because it will interpret /dev/fd0 as a number.
|
|
|
|
@par Directory layout
|
|
|
|
Most of the directory layout is based upon the Linux Kernel:
|
|
|
|
@verbatim
|
|
arch / * / -> contains architecture specific parts
|
|
arch / * / mach-* / -> SoC specific code
|
|
|
|
drivers / serial -> drivers
|
|
drivers / net
|
|
drivers / ...
|
|
|
|
include / asm-* -> architecture specific includes
|
|
include / asm-* / arch-* -> SoC specific includes
|
|
|
|
fs / -> filesystem support and filesystem drivers
|
|
|
|
lib / -> generic library functions (getopt, readline and the
|
|
like)
|
|
|
|
common / -> common stuff
|
|
|
|
commands / -> many things previously in common/cmd_*, one command
|
|
per file
|
|
|
|
net / -> Networking stuff
|
|
|
|
scripts / -> Kconfig system
|
|
|
|
Documentation / ->
|
|
@endverbatim
|
|
|
|
@section license UBoot's License
|
|
|
|
@verbatim
|
|
This program is free software; you can redistribute it and/or
|
|
modify it under the terms of the GNU General Public License as
|
|
published by the Free Software Foundation; either version 2 of
|
|
the License, or (at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
MA 02111-1307 USA
|
|
@endverbatim
|
|
|
|
*/
|