cm-x270.conf: Remove touchscreen from machine features list. Default to the W model, not L

git-svn-id: https://svn.o-hand.com/repos/poky/trunk@3807 311d38ba-8fff-0310-9ca6-ca027cbcb966
This commit is contained in:
Richard Purdie 2008-02-14 21:11:21 +00:00
parent cc62bad3aa
commit 0578c881f3
1 changed files with 6 additions and 6 deletions

View File

@ -12,10 +12,12 @@ PACKAGE_EXTRA_ARCHS = "armv4 armv4t armv5te iwmmxt"
require conf/machine/include/tune-xscale.inc
# console serial port. If you have a L module
# the below works. If you have a W module, add
# Console serial port.
# If you have a W module, add the following line to your local.conf:
# the following line to your local.conf:
# CMX270_CONSOLE_SERIAL_PORT = "ttyS0"
CMX270_CONSOLE_SERIAL_PORT ?= "ttyS0"
# the following is for the cm-x270 L module
#CMX270_CONSOLE_SERIAL_PORT ?= "ttyS1"
# NAND flash eraseblock size
# most of the older cm-x270 modules are populated with NAND flash
@ -24,8 +26,6 @@ require conf/machine/include/tune-xscale.inc
# can be overridden in local.conf if you have one of these devices.
CMX270_NAND_ERASEBLOCK_SIZE ?= "0x20000"
# the following is for the cm-x270 L module
CMX270_CONSOLE_SERIAL_PORT ?= "ttyS1"
# used by sysvinit_2 package, so rebuild this
# package if you change the SERIAL_CONSOLE setting
@ -48,7 +48,7 @@ EXTRA_IMAGECMD_jffs2 = "--little-endian --eraseblock=${CMX270_NAND_ERASEBLOCK_SI
ln -s ${IMAGE_NAME}.rootfs-summary.jffs2 ${IMAGE_LINK_NAME}.rootfs-summary.jffs2 \
"
MACHINE_FEATURES = "kernel26 pcmcia usbhost usbgadget pcmcia touchscreen alsa iwmmxt"
MACHINE_FEATURES = "kernel26 pcmcia usbhost usbgadget pcmcia alsa iwmmxt"
# to program the compulab NAND flash, the following scheme is suggested. Create
# a small rootfs that can fit in NOR flash using the following config: