documentation/dev-manual: model changes and updated figure
Edits to the dev-manual-model.xml chapter for general improvements. Also had to update the figure that shows the kernel development flow. (From yocto-docs rev: 2aacccb03d167eac74a1b45c39a9edac160efc7f) Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit is contained in:
parent
15793a8210
commit
42c80283e2
|
@ -9,16 +9,22 @@
|
|||
Many development models exist for which you can use the Yocto Project.
|
||||
However, for the purposes of this manual we are going to focus on two common ones:
|
||||
System Development and User Application Development.
|
||||
System Development covers Board Support Package (BSP) development and kernel modification.
|
||||
System Development covers Board Support Package (BSP) development and kernel modification
|
||||
or configuration.
|
||||
User Application Development covers development of applications that you intend to run on some
|
||||
target hardware.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
This chapter presents overviews of both system and application models.
|
||||
If you want to reference specific examples of these development models,
|
||||
see <xref linkend='dev-manual-bsp-appendix'>BSP Development Example</xref> and
|
||||
<xref linkend='dev-manual-kernel-appendix'>Kernel Modification Example</xref>.
|
||||
If you want to examine specific examples of the system development models,
|
||||
see the "<link linkend='dev-manual-bsp-appendix'>BSP Development Example</link>"
|
||||
appendix and the
|
||||
"<link linkend='dev-manual-kernel-appendix'>Kernel Modification Example</link>" appendix.
|
||||
For a user-space application development example that uses the Eclipse IDE,
|
||||
see the
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/adt-manual/adt-manual.html'>
|
||||
The Yocto Project Application Development Toolkit (ADT) User's Guide</ulink>.
|
||||
</para>
|
||||
|
||||
<section id='system-development-model'>
|
||||
|
@ -27,7 +33,7 @@
|
|||
<para>
|
||||
System development involves modification or creation of an image that you want to run on
|
||||
a specific hardware target.
|
||||
Usually when you want to create an image that runs on embedded hardware the image does
|
||||
Usually, when you want to create an image that runs on embedded hardware, the image does
|
||||
not require the same amount of features that a full-fledged Linux distribution provides.
|
||||
Thus, you can create a much smaller image that is designed to just use the hardware
|
||||
features for your particular hardware.
|
||||
|
@ -35,33 +41,33 @@
|
|||
|
||||
<para>
|
||||
To help you understand how system development works in the Yocto Project, this section
|
||||
covers two types of image development: BSP creation and kernel modification
|
||||
(see <xref linkend='kernel-spot'></xref>).
|
||||
covers two types of image development: BSP creation and kernel modification or
|
||||
configuration.
|
||||
</para>
|
||||
|
||||
<section id='developing-a-board-support-package-bsp'>
|
||||
<title>Developing a Board Support Package (BSP)</title>
|
||||
|
||||
<para>
|
||||
A BSP is a package of recipes that when applied during a build results in
|
||||
A BSP is a package of recipes that, when applied, during a build results in
|
||||
an image you can run on a particular board.
|
||||
Thus, the package, when compiled into the new image, supports the operation of the board.
|
||||
</para>
|
||||
|
||||
<note>
|
||||
For a brief list of terms used when describing the development process in the Yocto Project,
|
||||
see <xref linkend='yocto-project-terms'>Yocto Project Terms</xref> in this manual.
|
||||
see the "<link linkend='yocto-project-terms'>Yocto Project Terms</link>" section.
|
||||
</note>
|
||||
|
||||
<para>
|
||||
The remainder of this section presents the basic steps to create a BSP basing it on an
|
||||
existing BSP that ships with the Yocto Project.
|
||||
You can reference <xref linkend='dev-manual-bsp-appendix'>BSP Development Example</xref>
|
||||
for a detailed example that uses the Crown Bay BSP as a base BSP from which to start.
|
||||
You can reference the "<link linkend='dev-manual-bsp-appendix'>BSP Development Example</link>"
|
||||
appendix for a detailed example that uses the Crown Bay BSP as a base BSP from which to start.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
This illustration and the following list summarizes the BSP creation general workflow.
|
||||
The following illustration and list summarize the BSP creation general workflow.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
|
@ -71,37 +77,38 @@
|
|||
<para>
|
||||
<orderedlist>
|
||||
<listitem><para><emphasis>Set up your host development system to support
|
||||
development using the Yocto Project</emphasis>: See
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#the-linux-distro'>
|
||||
The Linux Distributions</ulink> section and
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#packages'>
|
||||
The Packages</ulink> section both
|
||||
development using the Yocto Project</emphasis>: See the
|
||||
"<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#the-linux-distro'>The Linux Distributions</ulink>" and the
|
||||
"<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#packages'>The Packages</ulink>" sections both
|
||||
in the Yocto Project Quick Start for requirements.</para></listitem>
|
||||
<listitem><para><emphasis>Establish a local copy of the Yocto Project files on your
|
||||
system</emphasis>: You need to have the Yocto Project files available on your host system.
|
||||
Having the Yocto Project files on your system gives you access to the build
|
||||
process and tools you need.
|
||||
For information on how to get these files, see the
|
||||
<xref linkend='getting-setup'>Getting Setup</xref> section in this manual.</para></listitem>
|
||||
"<link linkend='getting-setup'>Getting Setup</link>" section.</para></listitem>
|
||||
<listitem><para><emphasis>Establish a local copy of the base BSP files</emphasis>: Having
|
||||
the BSP files on your system gives you access to the build
|
||||
process and tools you need.
|
||||
For information on how to get these files, see
|
||||
<xref linkend='getting-setup'>Getting Setup</xref> earlier in this manual.</para></listitem>
|
||||
process and tools you need for creating a BSP.
|
||||
For information on how to get these files, see the
|
||||
"<link linkend='getting-setup'>Getting Setup</link>" section.</para></listitem>
|
||||
<listitem><para><emphasis>Choose a Yocto Project-supported BSP as your base BSP</emphasis>:
|
||||
The Yocto Project ships with several BSPs that support various hardware.
|
||||
It is best to base your new BSP on an existing BSP rather than create all the
|
||||
recipes and configuration files from scratch.
|
||||
While it is possible to create everything from scratch, basing your new BSP
|
||||
on something that is close is much easier.
|
||||
Or, at a minimum, it gives you some structure with which to start.</para>
|
||||
Or, at a minimum, leveraging off an existing BSP
|
||||
gives you some structure with which to start.</para>
|
||||
<para>At this point you need to understand your target hardware well enough to determine which
|
||||
existing BSP it most closely matches.
|
||||
Things to consider are your hardware’s on-board features such as CPU type and graphics support.
|
||||
Things to consider are your hardware’s on-board features, such as CPU type and graphics support.
|
||||
You should look at the README files for supported BSPs to get an idea of which one
|
||||
you could use.
|
||||
A generic Atom-based BSP to consider is the Crown Bay that does not support
|
||||
the Intel® Embedded Media Graphics Driver (EMGD).
|
||||
A generic <trademark class='registered'>Intel</trademark>
|
||||
<trademark class='trade'>Atom</trademark>-based BSP to consider is the
|
||||
Crown Bay that does not support the <trademark class='registered'>Intel</trademark>
|
||||
Embedded Media Graphics Driver (EMGD).
|
||||
The remainder of this example uses that base BSP.</para>
|
||||
<para>To see the supported BSPs, go to the Yocto Project
|
||||
<ulink url='http://www.yoctoproject.org/download'>download page</ulink> and click
|
||||
|
@ -110,35 +117,34 @@
|
|||
isolating and storing work for a given piece of hardware.
|
||||
A layer is really just a location or area in which you place the recipes for your BSP.
|
||||
In fact, a BSP is, in itself, a special type of layer.
|
||||
Consider an application as another example that illustrates a layer.
|
||||
Another example that illustrates a layer is an application.
|
||||
Suppose you are creating an application that has library or other dependencies in
|
||||
order for it to compile and run.
|
||||
The layer, in this case, would be where all the recipes that define those dependencies
|
||||
are kept. The key point for a layer is that it is an isolated area that contains
|
||||
are kept.
|
||||
The key point for a layer is that it is an isolated area that contains
|
||||
all the relevant information for the project that the Yocto Project build
|
||||
system knows about.</para>
|
||||
<note>The Yocto Project supports four BSPs that are part of the
|
||||
Yocto Project release: <filename>atom-pc</filename>, <filename>beagleboard</filename>,
|
||||
<filename>mpc8315e</filename>, and <filename>routerstationpro</filename>.
|
||||
The recipes and configurations for these four BSPs are located and dispersed
|
||||
within local Yocto Project files.
|
||||
within the local Yocto Project files.
|
||||
Consequently, they are not totally isolated in the spirit of layers unless you think
|
||||
of <filename>meta-yocto</filename> as a layer itself.
|
||||
On the other hand, BSP layers for Crown Bay, Emenlow, Jasper Forest,
|
||||
N450, and Sugar Bay are isolated.</note>
|
||||
<para>When you set up a layer for a new BSP you should follow a standard layout.
|
||||
This layout is described in the
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/bsp-guide/bsp-guide.html#bsp-filelayout'>
|
||||
Example Filesystem Layout</ulink> section of the Board Support Package (BSP) Development
|
||||
Guide.
|
||||
In the standard layout you will notice a suggested structure for recipes and
|
||||
<para>When you set up a layer for a new BSP, you should follow a standard layout.
|
||||
This layout is described in the section
|
||||
"<ulink url='http://www.yoctoproject.org/docs/1.1/bsp-guide/bsp-guide.html#bsp-filelayout'>Example Filesystem Layout</ulink>" section of the Board Support Package (BSP) Development Guide.
|
||||
In the standard layout, you will notice a suggested structure for recipes and
|
||||
configuration information.
|
||||
You can see the standard layout for the Crown Bay BSP in this example by examining the
|
||||
directory structure of the <filename>meta-crownbay</filename> layer inside the
|
||||
local Yocto Project files.</para></listitem>
|
||||
<listitem><para><emphasis>Make configuration changes to your new BSP
|
||||
layer</emphasis>: The standard BSP layer structure organizes the files you need to edit in
|
||||
<filename>conf</filename> and several <filename>recipes-*</filename> within the
|
||||
<filename>conf</filename> and several <filename>recipes-*</filename> directories within the
|
||||
BSP layer.
|
||||
Configuration changes identify where your new layer is on the local system
|
||||
and identify which kernel you are going to use.
|
||||
|
@ -148,22 +154,20 @@
|
|||
recipes you don't use, and adding new recipes that you need to support your hardware.
|
||||
</para></listitem>
|
||||
<listitem><para><emphasis>Prepare for the build</emphasis>: Once you have made all the
|
||||
changes to your BSP layer there remains a few things
|
||||
changes to your BSP layer, there remains a few things
|
||||
you need to do for the Yocto Project build system in order for it to create your image.
|
||||
You need to get the build environment ready by sourcing an environment setup script
|
||||
and you need to be sure two key configuration files are configured appropriately.</para>
|
||||
<para>The entire process for building an image is overviewed in the
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#building-image'>
|
||||
Building an Image</ulink> section of the Yocto Project Quick Start.
|
||||
<para>The entire process for building an image is overviewed in the section
|
||||
"<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#building-image'>Building an Image</ulink>" section of the Yocto Project Quick Start.
|
||||
You might want to reference this information.</para></listitem>
|
||||
<listitem><para><emphasis>Build the image</emphasis>: The Yocto Project uses the BitBake
|
||||
tool to build images based on the type of image you want to create.
|
||||
You can find more information on BitBake
|
||||
<ulink url='http://bitbake.berlios.de/manual/'>here</ulink>.</para>
|
||||
<para>The build process supports several types of images to satisfy different needs.
|
||||
See
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html#ref-images'>
|
||||
Reference: Images</ulink> in the
|
||||
See the
|
||||
"<ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html#ref-images'>Reference: Images</ulink>" appendix in the
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html'>
|
||||
Yocto Project Reference Manual</ulink>for information on supported images.</para></listitem>
|
||||
</orderedlist>
|
||||
|
@ -175,9 +179,9 @@
|
|||
You can also find supplemental information in
|
||||
<ulink url='http://yoctoproject.org/docs/1.1/bsp-guide/bsp-guide.html'>
|
||||
The Board Support Package (BSP) Development Guide</ulink>.
|
||||
Finally, there is wiki page write up of the example located
|
||||
Finally, there is wiki page write up of the example also located
|
||||
<ulink url='https://wiki.yoctoproject.org/wiki/Transcript:_creating_one_generic_Atom_BSP_from_another'>
|
||||
here</ulink> you might find helpful.
|
||||
here</ulink> that you might find helpful.
|
||||
</para>
|
||||
</section>
|
||||
|
||||
|
@ -198,7 +202,8 @@
|
|||
For a complete discussion of the kernel, see
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/kernel-manual/kernel-manual.html'>
|
||||
The Yocto Project Kernel Architecture and Use Manual</ulink>.
|
||||
You can reference <xref linkend='dev-manual-kernel-appendix'>Kernel Modification Example</xref>
|
||||
You can reference the appendix
|
||||
"<link linkend='dev-manual-kernel-appendix'>Kernel Modification Example</link>"
|
||||
for a detailed example that changes the configuration of a kernel.
|
||||
</para>
|
||||
|
||||
|
@ -210,6 +215,7 @@
|
|||
of files that contain kernel patches.
|
||||
The Yocto Project, however, employs mechanisims, that in a sense, result in a kernel source
|
||||
generator.
|
||||
By the end of this section, this analogy will become clearer.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
|
@ -365,17 +371,14 @@
|
|||
<orderedlist>
|
||||
<listitem><para><emphasis>Set up your host development system to support
|
||||
development using the Yocto Project</emphasis>: See
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#the-linux-distro'>
|
||||
The Linux Distributions</ulink> section and
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#packages'>
|
||||
The Packages</ulink> section both
|
||||
"<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#the-linux-distro'>The Linux Distributions</ulink>" and
|
||||
"<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#packages'>The Packages</ulink>" sections both
|
||||
in the Yocto Project Quick Start for requirements.</para></listitem>
|
||||
<listitem><para><emphasis>Establish a local copy of the Yocto Project files on your
|
||||
system</emphasis>: Having the Yocto Project files on your system gives you access to
|
||||
the build process and tools you need.
|
||||
For information on how to get these files, see the bulleted item
|
||||
<link linkend='local-yp-release'>Yocto Project Release</link> in
|
||||
<xref linkend='getting-setup'>Getting Setup</xref> earlier in this manual.
|
||||
"<link linkend='local-yp-release'>Yocto Project Release</link>" earlier in this manual.
|
||||
</para></listitem>
|
||||
<listitem><para><emphasis>Set up the <filename>poky-extras</filename> Git
|
||||
repository</emphasis>: This repository is the area for your configuration
|
||||
|
@ -384,85 +387,87 @@
|
|||
It is good practice to set this repository up inside the local Yocto
|
||||
Project files Git repository.
|
||||
For information on how to get these files, see the bulleted item
|
||||
<link linkend='poky-extras-repo'>The
|
||||
<filename>poky-extras</filename> Git Repository</link> in
|
||||
<xref linkend='getting-setup'>Getting Setup</xref> earlier in this manual.
|
||||
</para></listitem>
|
||||
"<link linkend='poky-extras-repo'>The <filename>poky-extras</filename> Git Repository</link>"
|
||||
earlier in this manual.</para></listitem>
|
||||
<listitem><para><emphasis>Establish a local copy of the Linux Yocto kernel files on your
|
||||
system</emphasis>: In order to make modifications to the kernel you need two things:
|
||||
a bare clone of the Linux Yocto kernel you are modifying and a copy of that
|
||||
bare clone.
|
||||
a bare clone of the Linux Yocto kernel you are modifying and
|
||||
a copy of that bare clone.
|
||||
The bare clone is required by the build process and is the area to which you
|
||||
push your kernel source changes.
|
||||
push your kernel source changes (pulling does not work with bare clones).
|
||||
The copy of the bare clone is a local Git repository that contains all the kernel's
|
||||
source files.
|
||||
You make your changes to the files in this copy of the bare clone.
|
||||
For information on how to set these two items up, see the bulleted item
|
||||
<link linkend='local-kernel-files'>Linux Yocto Kernel</link> in
|
||||
<xref linkend='getting-setup'>Getting Setup</xref> earlier in this manual.
|
||||
</para></listitem>
|
||||
"<link linkend='local-kernel-files'>Linux Yocto Kernel</link>"
|
||||
earlier in this manual.</para></listitem>
|
||||
<listitem><para><emphasis>Make changes to the kernel source code if
|
||||
applicable</emphasis>: Modifying the kernel does not always mean directly
|
||||
changing source files.
|
||||
However, if you have to do this then you make the changes in the local
|
||||
However, if you have to do this, you make the changes in the local
|
||||
Git repository you set up to hold the source files (i.e. the copy of the
|
||||
bare clone).
|
||||
Once the changes are made you need to use Git commands to commit the changes
|
||||
Once the changes are made, you need to use Git commands to commit the changes
|
||||
and then push them to the bare clone.</para></listitem>
|
||||
<listitem><para><emphasis>Make kernel configuration changes
|
||||
to your local kernel layer if applicable</emphasis>:
|
||||
If your situation calls for changing the kernel's configuration you can
|
||||
If your situation calls for changing the kernel's configuration, you can
|
||||
use <filename>menuconfig</filename>
|
||||
to enable and disable kernel configurations.
|
||||
Using <filename>menuconfig</filename> allows you to develop and test the
|
||||
configuration changes you are making to the kernel.</para></listitem>
|
||||
Using <filename>menuconfig</filename> allows you to interactively develop and test the
|
||||
configuration changes you are making to the kernel.
|
||||
When saved, changes using <filename>menuconfig</filename> update the kernel's
|
||||
<filename>.config</filename>.
|
||||
As an alternative method to changing the kernel's configuration, you can simply
|
||||
edit the <filename>.config</filename> found in the Yocto Project build
|
||||
directory at <filename>tmp/sysroots/<machine-name>/kernel</filename>
|
||||
directly.</para></listitem>
|
||||
<listitem><para><emphasis>Add new kernel recipes if applicable</emphasis>: The standard
|
||||
layer structure organizes recipe files inside the
|
||||
<filename>meta-kernel-dev</filename> layer that is within the
|
||||
<filename>poky-extras</filename> Git repository.
|
||||
If you need to add new kernel recipes you add them within this layer.
|
||||
Also within this area you will find the <filename>.bbappend</filename>
|
||||
If you need to add new kernel recipes, you add them within this layer.
|
||||
Also within this area, you will find the <filename>.bbappend</filename>
|
||||
file that appends information to the kernel's recipe file used during the
|
||||
build.
|
||||
</para></listitem>
|
||||
<listitem><para><emphasis>Prepare for the build</emphasis>: Once you have made all the
|
||||
changes to your kernel (configurations, source code changes, recipe additions,
|
||||
or recipe changes) there remains a few things
|
||||
you need to do for the Yocto Project build system in order for it to create your image.
|
||||
If you have not done so you need to get the build environment ready by sourcing
|
||||
or recipe changes), there remains a few things
|
||||
you need to do in order for the Yocto Project build system to create your image.
|
||||
If you have not done so, you need to get the build environment ready by sourcing
|
||||
the environment setup script described earlier.
|
||||
You also need to be sure two key configuration files
|
||||
(<filename>local.conf</filename> and <filename>bblayers.conf</filename>)
|
||||
are configured appropriately.</para>
|
||||
<para>The entire process for building an image is overviewed in the
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#building-image'>
|
||||
Building an Image</ulink> section of the Yocto Project Quick Start.
|
||||
"<ulink url='http://www.yoctoproject.org/docs/1.1/yocto-project-qs/yocto-project-qs.html#building-image'>Building an Image</ulink>" section of the Yocto Project Quick Start.
|
||||
You might want to reference this information.
|
||||
Also, you should look at the detailed examples found in the appendices at
|
||||
end of this manual.</para></listitem>
|
||||
<listitem><para><emphasis>Build the image</emphasis>: The Yocto Project uses the BitBake
|
||||
at the end of this manual.</para></listitem>
|
||||
<listitem><para><emphasis>Build the image</emphasis>: The Yocto Project
|
||||
build system Poky uses the BitBake
|
||||
tool to build images based on the type of image you want to create.
|
||||
You can find more information on BitBake
|
||||
<ulink url='http://bitbake.berlios.de/manual/'>here</ulink>.</para>
|
||||
<para>The build process supports several types of images to satisfy different needs.
|
||||
See
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html#ref-images'>
|
||||
Reference: Images</ulink> in the
|
||||
See the appendix
|
||||
"<ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html#ref-images'>Reference: Images</ulink>" in the
|
||||
<ulink url='http://www.yoctoproject.org/docs/1.1/poky-ref-manual/poky-ref-manual.html'>
|
||||
Yocto Project Reference Manual</ulink> for information on supported
|
||||
images.</para></listitem>
|
||||
<listitem><para><emphasis>Make your configuration changes available
|
||||
in the kernel layer</emphasis>: Up to this point all the configuration changes to the
|
||||
in the kernel layer</emphasis>: Up to this point, all the configuration changes to the
|
||||
kernel have been done and tested iteratively.
|
||||
Once they are tested and ready to go you can move them into the kernel layer,
|
||||
which allows you to distribute the layer.
|
||||
[WRITER'S NOTE: Not sure if the layer is meta-kernel-dev or if it would be
|
||||
a new layer copied from the work done there.]</para></listitem>
|
||||
<listitem><para><emphasis>Push your configuration and recipe changes upstream to the
|
||||
linux Yocto Git repository (in-tree changes)</emphasis>: If the changes you made
|
||||
are suited for all Linux Yocto users you might want to push the changes up into
|
||||
the Linux Yocto Git repository so that they become part of the kernel tree
|
||||
and available to everyone using the kernel.</para></listitem>
|
||||
Once they are tested and ready to go, you can move them into the kernel layer,
|
||||
which allows you to distribute the layer.</para></listitem>
|
||||
<listitem><para><emphasis>If applicable, share your in-tree changes</emphasis>:
|
||||
If the changes you made
|
||||
are suited for all Linux Yocto users, you might want to push the changes to a
|
||||
contribution area for the Linux Yocto Git repository.
|
||||
Once the changes are pushed, you can request that they
|
||||
be pulled into the master branch of the kernel tree.
|
||||
Doing so makes them available to everyone using the kernel.</para></listitem>
|
||||
</orderedlist>
|
||||
</para>
|
||||
</section>
|
||||
|
|
Binary file not shown.
Before Width: | Height: | Size: 61 KiB After Width: | Height: | Size: 60 KiB |
Loading…
Reference in New Issue