sysmo-bts
/
generic-poky
9
0
Fork 0
Code Pull Requests Releases Activity

Merge commit '04093241861f665ca3a7e47c5706be16269a4b9b' into dora

This commit is contained in:
Holger Hans Peter Freyther 2015-11-27 11:03:19 +01:00
parent 9d3031bb8f 0409324186
commit 87183b8b71
40 changed files with 1276 additions and 34 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

41
meta-sysmocom-bsp/conf/machine/gsmk-owhw.conf Normal file
View File

@ -0,0 +1,41 @@
#@TYPE: Machine
#@NAME: gsmk-owhw
#@DESCRIPTION: Machine configuration for the GSMK OWHW
require conf/machine/include/ti33x.inc
IMAGE_FSTYPES += "ubi tar.gz"
SERIAL_CONSOLE = "115200 ttyO0"
# UBI information. Note that this is board and kernel specific. Changes
# in your kernel port may require changes in these variables. For more
# details about this board please see
# http://processors.wiki.ti.com/index.php/UBIFS_Support
# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
# From dmesg:
# UBI: smallest flash I/O unit: 2048
# UBI: logical eraseblock size: 126976 bytes
# from ubiattach stdout:
# UBI device number 0, total 1988 LEBs
MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
# from dmesg:
# UBI: smallest flash I/O unit: 2048
# UBI: physical eraseblock size: 131072 bytes (128 KiB)
# UBI: sub-page size: 512
# UBI: VID header offset: 2048 (aligned 2048)
UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
# Go back to prefer our kernel
PREFERRED_PROVIDER_virtual/kernel = "linux-sysmocom"
KERNEL_IMAGETYPE = "uImage"
PREFERRED_PROVIDER_virtual/bootloader = "barebox-gsmk-owhw"
EXTRA_IMAGEDEPENDS += "barebox-gsmk-owhw"
MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "\
kernel usb2514 \
"

2
meta-sysmocom-bsp/conf/machine/include/sysmobts.inc
View File

@ -1,7 +1,7 @@
TARGET_ARCH = "arm"
PREFERRED_PROVIDER_virtual/kernel = "linux-sysmocom"
PREFERRED_VERSION_linux-sysmocom = "3.10.80+git%"
PREFERRED_VERSION_linux-sysmocom = "3.10.84+git%"
PREFERRED_PROVIDERS += "virtual/${TARGET_PREFIX}depmod:module-init-tools-cross"
PREFERRED_VERSION_u-boot = "git"

3
meta-sysmocom-bsp/recipes-apps/sysmocom-backup-data/files/sysmocom-backup-data
View File

@ -70,7 +70,8 @@ do_backup_files() {
tar -rf $BACKUP_FILE --transform='s,^,info/,' -C $NAME installed_packages mac_addr
# 6. Create stable link
ln -sf $BACKUP_FILE /data/sysmocom-backup.tar
cd /data/
ln -sf `basename $BACKUP_FILE` sysmocom-backup.tar
# 76
echo "The backup was stored to $BACKUP_FILE"

4
meta-sysmocom-bsp/recipes-apps/sysmocom-backup-data/sysmocom-backup-data_1.0.bb
View File

@ -1,7 +1,7 @@
DESCRIPTION = "sysmocom config backup and restore scripts"
LICENSE = "GPLv3+"
LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
PR = "r12"
PR = "r13"
SRC_URI = " \
file://sysmocom-backup-data \
@ -26,4 +26,4 @@ do_install() {
SYSTEMD_PACKAGES = "${PN}"
SYSTEMD_SERVICE_${PN} = "data.mount sysmocom-restore.service"
SYSTEMD_AUTO_ENABLE_${PN} = "enable"
SYSTEMD_AUTO_ENABLE_${PN} = "disable"

4
meta-sysmocom-bsp/recipes-apps/tasks/task-sysmocom-feed.bb
View File

@ -3,7 +3,7 @@ LICENSE = "MIT"
LIC_FILES_CHKSUM = " \
file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
ALLOW_EMPTY_${PN} = "1"
PR = "r19"
PR = "r20"
RDEPENDS_${PN} = "\
task-sysmocom-tools \
@ -16,4 +16,4 @@ RDEPENDS_${PN} = "\
logrotate python-jsonrpclib python-enum iputils \
packagegroup-sysmobts-sob rtl8169-eeprom autossh \
perl libdbd-sqlite-perl libdbi-perl libjson-perl \
netcat-openbsd"
netcat-openbsd perf"

1
meta-sysmocom-bsp/recipes-apps/tasks/task-sysmocom-tools.bb
View File

@ -17,4 +17,5 @@ RDEPENDS_${PN} = "\
sysmocom-backup \
sysmocom-backup-default \
sysmocom-systemd \
sysmocom-configure \
"

329
meta-sysmocom-bsp/recipes-bsp/barebox/barebox-gsmk-owhw-mlo/defconfig Normal file
View File

@ -0,0 +1,329 @@
#
# Automatically generated file; DO NOT EDIT.
# Barebox/arm 2015.06.0 Configuration
#
CONFIG_ARM=y
#
# System Type
#
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM2835 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_DIGIC is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_NOMADIK is not set
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_ARCH_S3C24xx is not set
# CONFIG_ARCH_S5PCxx is not set
# CONFIG_ARCH_S3C64xx is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y
#
# processor features
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
#
# OMAP Features
#
CONFIG_ARCH_AM33XX=y
CONFIG_OMAP_CLOCK_SOURCE_DMTIMER0=y
CONFIG_OMAP_GPMC=y
CONFIG_OMAP_BUILD_IFT=y
# CONFIG_OMAP_BUILD_SPI is not set
# CONFIG_OMAP_SERIALBOOT is not set
CONFIG_OMAP_MULTI_BOARDS=y
# CONFIG_MACH_AFI_GF is not set
# CONFIG_MACH_BEAGLEBONE is not set
CONFIG_MACH_PHYTEC_SOM_AM335X=y
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_AEABI=y
CONFIG_THUMB2_BAREBOX=y
#
# ARM specific settings
#
# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set
CONFIG_ARM_EXCEPTIONS=y
# CONFIG_ARM_UNWIND is not set
CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
CONFIG_HAS_CACHE=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_GPIO=y
CONFIG_BLOCK=y
CONFIG_FILETYPE=y
#
# General Settings
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BANNER=y
# CONFIG_MEMINFO is not set
# CONFIG_ENVIRONMENT_VARIABLES is not set
#
# memory layout
#
CONFIG_HAVE_PBL_IMAGE=y
CONFIG_HAVE_PBL_MULTI_IMAGES=y
CONFIG_HAVE_IMAGE_COMPRESSION=y
CONFIG_PBL_IMAGE=y
CONFIG_PBL_MULTI_IMAGES=y
CONFIG_PBL_RELOCATABLE=y
CONFIG_IMAGE_COMPRESSION=y
# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
CONFIG_IMAGE_COMPRESSION_LZO=y
# CONFIG_IMAGE_COMPRESSION_GZIP is not set
# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
# CONFIG_IMAGE_COMPRESSION_NONE is not set
CONFIG_MMU=y
CONFIG_MMU_EARLY=y
CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
CONFIG_TEXT_BASE=0x0
CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x8000
CONFIG_MALLOC_SIZE=0x0
# CONFIG_EXPERIMENTAL is not set
# CONFIG_MALLOC_DLMALLOC is not set
CONFIG_MALLOC_TLSF=y
# CONFIG_MALLOC_DUMMY is not set
# CONFIG_KALLSYMS is not set
CONFIG_RELOCATABLE=y
# CONFIG_PANIC_HANG is not set
CONFIG_PROMPT="MLO>"
CONFIG_BAUDRATE=115200
CONFIG_SIMPLE_READLINE=y
CONFIG_CBSIZE=1024
# CONFIG_SHELL_HUSH is not set
# CONFIG_SHELL_SIMPLE is not set
CONFIG_SHELL_NONE=y
# CONFIG_GLOB is not set
# CONFIG_PASSWORD is not set
# CONFIG_ERRNO_MESSAGES is not set
# CONFIG_TIMESTAMP is not set
CONFIG_IMD=y
# CONFIG_IMD_TARGET is not set
# CONFIG_KERNEL_INSTALL_TARGET is not set
CONFIG_CONSOLE_FULL=y
# CONFIG_CONSOLE_SIMPLE is not set
# CONFIG_CONSOLE_NONE is not set
# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
# CONFIG_CONSOLE_ACTIVATE_ALL is not set
CONFIG_CONSOLE_ACTIVATE_NONE=y
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
# CONFIG_PARTITION_DISK_EFI is not set
# CONFIG_DEFAULT_ENVIRONMENT is not set
CONFIG_DEFAULT_COMPRESSION_NONE=y
CONFIG_HAVE_DEFAULT_ENVIRONMENT_NEW=y
# CONFIG_BAREBOXENV_TARGET is not set
# CONFIG_BAREBOXCRC32_TARGET is not set
# CONFIG_POLLER is not set
#
# Debugging
#
CONFIG_COMPILE_LOGLEVEL=6
CONFIG_DEFAULT_LOGLEVEL=7
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_OMAP_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
CONFIG_HAS_DEBUG_LL=y
# CONFIG_HAS_POWEROFF is not set
# CONFIG_NET is not set
#
# Drivers
#
CONFIG_OFTREE=y
CONFIG_OFTREE_MEM_GENERIC=y
CONFIG_DTC=y
CONFIG_OFDEVICE=y
CONFIG_OF_GPIO=y
#
# serial drivers
#
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
# CONFIG_DRIVER_SERIAL_CADENCE is not set
#
# SPI drivers
#
# CONFIG_SPI is not set
# CONFIG_I2C is not set
CONFIG_MTD=y
# CONFIG_MTD_WRITE is not set
# CONFIG_MTD_OOB_DEVICE is not set
# CONFIG_MTD_RAW_DEVICE is not set
#
# Self contained MTD devices
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_DRIVER_CFI is not set
CONFIG_NAND=y
# CONFIG_NAND_ECC_SOFT is not set
# CONFIG_NAND_ECC_BCH is not set
CONFIG_NAND_ECC_HW=y
# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
# CONFIG_NAND_ECC_HW_SYNDROME is not set
# CONFIG_NAND_ECC_HW_NONE is not set
# CONFIG_NAND_INFO is not set
# CONFIG_NAND_BBT is not set
CONFIG_NAND_OMAP_GPMC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_UBI is not set
CONFIG_DISK=y
# CONFIG_DISK_WRITE is not set
#
# drive types
#
# CONFIG_DISK_ATA is not set
# CONFIG_DISK_AHCI is not set
#
# interface types
#
# CONFIG_DISK_INTF_PLATFORM_IDE is not set
# CONFIG_USB_HOST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_USB_MUSB is not set
# CONFIG_VIDEO is not set
CONFIG_MCI=y
#
# --- Feature list ---
#
CONFIG_MCI_STARTUP=y
# CONFIG_MCI_WRITE is not set
# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
#
# --- MCI host drivers ---
#
# CONFIG_MCI_DW is not set
CONFIG_MCI_OMAP_HSMMC=y
CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
#
# MFD
#
# CONFIG_MFD_SYSCON is not set
#
# Misc devices
#
# CONFIG_JTAG is not set
# CONFIG_SRAM is not set
# CONFIG_BOOTSTATE_DRV is not set
# CONFIG_LED is not set
#
# EEPROM support
#
#
# Input device support
#
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_WATCHDOG is not set
# CONFIG_PWM is not set
#
# DMA support
#
CONFIG_GPIOLIB=y
#
# GPIO
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IMX is not set
# CONFIG_GPIO_MXS is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_W1 is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
#
# Bus devices
#
CONFIG_BUS_OMAP_GPMC=y
# CONFIG_REGULATOR is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_RTC_CLASS is not set
#
# Firmware Drivers
#
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
#
# Filesystem support
#
CONFIG_FS=y
# CONFIG_FS_CRAMFS is not set
# CONFIG_FS_EXT4 is not set
# CONFIG_FS_RAMFS is not set
# CONFIG_FS_DEVFS is not set
CONFIG_FS_FAT=y
# CONFIG_FS_FAT_WRITE is not set
CONFIG_FS_FAT_LFN=y
# CONFIG_FS_BPKFS is not set
# CONFIG_FS_UIMAGEFS is not set
#
# Library routines
#
# CONFIG_ZLIB is not set
# CONFIG_BZLIB is not set
# CONFIG_LZ4_DECOMPRESS is not set
# CONFIG_XZ_DECOMPRESS is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_PROCESS_ESCAPE_SEQUENCE is not set
# CONFIG_LZO_DECOMPRESS is not set
#
# Library gui routines
#
# CONFIG_BOOTSTRAP is not set
# CONFIG_DIGEST is not set

21
meta-sysmocom-bsp/recipes-bsp/barebox/barebox-gsmk-owhw-mlo_git.bb Normal file
View File

@ -0,0 +1,21 @@
require barebox.inc
SRCREV = "4d1c656aa7ba155d8a555602d832ff1fc76d63f8"
SRC_URI = " \
git://git.sysmocom.de/barebox.git;branch=v2015.06 \
file://defconfig \
"
PV = "v2015.06+git${SRCPV}"
S = "${WORKDIR}/git"
BAREBOX_IMAGE ?= "barebox-${MACHINE}-mlo-${PKGV}-${PKGR}.img"
BAREBOX_SYMLINK ?= "barebox-${MACHINE}-mlo.img"
do_deploy () {
install -d ${DEPLOYDIR}
install ${S}/images/barebox-am33xx-gsmk-owhw-mlo.img ${DEPLOYDIR}/${BAREBOX_IMAGE}
cd ${DEPLOYDIR}
rm -f ${BAREBOX_SYMLINK}
ln -sf ${BAREBOX_IMAGE} ${BAREBOX_SYMLINK}
}

604
meta-sysmocom-bsp/recipes-bsp/barebox/barebox-gsmk-owhw/defconfig Normal file
View File

@ -0,0 +1,604 @@
#
# Automatically generated file; DO NOT EDIT.
# Barebox/arm 2015.06.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
#
# System Type
#
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_BCM2835 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_DIGIC is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_HIGHBANK is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_NOMADIK is not set
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_ARCH_S3C24xx is not set
# CONFIG_ARCH_S5PCxx is not set
# CONFIG_ARCH_S3C64xx is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y
#
# processor features
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
#
# OMAP Features
#
CONFIG_ARCH_AM33XX=y
CONFIG_OMAP_CLOCK_SOURCE_DMTIMER0=y
CONFIG_OMAP_GPMC=y
# CONFIG_OMAP_BUILD_IFT is not set
# CONFIG_OMAP_BUILD_SPI is not set
# CONFIG_BAREBOX_UPDATE_AM33XX_SPI_NOR_MLO is not set
CONFIG_BAREBOX_UPDATE_AM33XX_NAND=y
CONFIG_OMAP_MULTI_BOARDS=y
# CONFIG_MACH_AFI_GF is not set
# CONFIG_MACH_BEAGLEBONE is not set
CONFIG_MACH_PHYTEC_SOM_AM335X=y
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_AEABI=y
CONFIG_THUMB2_BAREBOX=y
CONFIG_ARM_BOARD_APPEND_ATAG=y
#
# ARM specific settings
#
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
CONFIG_ARM_EXCEPTIONS=y
CONFIG_ARM_UNWIND=y
CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
CONFIG_ENV_HANDLING=y
CONFIG_HAS_CACHE=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_GPIO=y
CONFIG_BOOTM=y
CONFIG_FILETYPE=y
CONFIG_BINFMT=y
CONFIG_UIMAGE=y
CONFIG_LOGBUF=y
CONFIG_GLOBALVAR=y
CONFIG_STDDEV=y
CONFIG_BAREBOX_UPDATE=y
CONFIG_MENUTREE=y
CONFIG_FILE_LIST=y
#
# General Settings
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BANNER=y
CONFIG_MEMINFO=y
CONFIG_ENVIRONMENT_VARIABLES=y
#
# memory layout
#
CONFIG_HAVE_PBL_IMAGE=y
CONFIG_HAVE_PBL_MULTI_IMAGES=y
CONFIG_HAVE_IMAGE_COMPRESSION=y
CONFIG_PBL_IMAGE=y
CONFIG_PBL_MULTI_IMAGES=y
CONFIG_PBL_RELOCATABLE=y
CONFIG_IMAGE_COMPRESSION=y
# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
CONFIG_IMAGE_COMPRESSION_LZO=y
# CONFIG_IMAGE_COMPRESSION_GZIP is not set
# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
# CONFIG_IMAGE_COMPRESSION_NONE is not set
CONFIG_MMU=y
CONFIG_MMU_EARLY=y
CONFIG_HAVE_CONFIGURABLE_TEXT_BASE=y
CONFIG_TEXT_BASE=0x0
CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x8000
CONFIG_MALLOC_SIZE=0x0
# CONFIG_EXPERIMENTAL is not set
# CONFIG_MALLOC_DLMALLOC is not set
CONFIG_MALLOC_TLSF=y
CONFIG_KALLSYMS=y
CONFIG_RELOCATABLE=y
# CONFIG_PANIC_HANG is not set
CONFIG_PROMPT="barebox> "
CONFIG_BAUDRATE=115200
CONFIG_CBSIZE=1024
CONFIG_SHELL_HUSH=y
# CONFIG_SHELL_SIMPLE is not set
# CONFIG_SHELL_NONE is not set
CONFIG_GLOB=y
CONFIG_GLOB_SORT=y
CONFIG_PROMPT_HUSH_PS2="> "
CONFIG_HUSH_FANCY_PROMPT=y
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
CONFIG_PASSWORD=y
CONFIG_PASSWORD_DEFAULT=""
# CONFIG_PASSWD_SUM_MD5 is not set
CONFIG_PASSWD_SUM_SHA1=y
# CONFIG_PASSWD_SUM_SHA256 is not set
# CONFIG_PASSWD_SUM_SHA512 is not set
# CONFIG_PASSWD_CRYPTO_PBKDF2 is not set
CONFIG_DYNAMIC_CRC_TABLE=y
CONFIG_ERRNO_MESSAGES=y
# CONFIG_TIMESTAMP is not set
CONFIG_IMD=y
CONFIG_IMD_TARGET=y
# CONFIG_KERNEL_INSTALL_TARGET is not set
CONFIG_CONSOLE_FULL=y
# CONFIG_CONSOLE_SIMPLE is not set
# CONFIG_CONSOLE_NONE is not set
# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
CONFIG_CONSOLE_ACTIVATE_ALL=y
# CONFIG_CONSOLE_ACTIVATE_NONE is not set
# CONFIG_PARTITION is not set
CONFIG_DEFAULT_ENVIRONMENT=y
# CONFIG_DEFAULT_COMPRESSION_GZIP is not set
# CONFIG_DEFAULT_COMPRESSION_LZO is not set
CONFIG_DEFAULT_COMPRESSION_NONE=y
CONFIG_HAVE_DEFAULT_ENVIRONMENT_NEW=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_DFU=y
CONFIG_DEFAULT_ENVIRONMENT_PATH=""
CONFIG_BAREBOXENV_TARGET=y
# CONFIG_BAREBOXCRC32_TARGET is not set
CONFIG_POLLER=y
CONFIG_STATE=y
CONFIG_BOOTSTATE=y
CONFIG_RESET_SOURCE=y
#
# Debugging
#
CONFIG_COMPILE_LOGLEVEL=6
CONFIG_DEFAULT_LOGLEVEL=7
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_OMAP_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
CONFIG_HAS_DEBUG_LL=y
CONFIG_COMMAND_SUPPORT=y
# CONFIG_HAS_POWEROFF is not set
CONFIG_COMPILE_HASH=y
CONFIG_COMPILE_MEMORY=y
#
# Commands
#
#
# Information
#
CONFIG_CMD_ARM_CPUINFO=y
CONFIG_CMD_DEVINFO=y
CONFIG_CMD_DMESG=y
CONFIG_CMD_DRVINFO=y
CONFIG_CMD_HELP=y
CONFIG_LONGHELP=y
CONFIG_CMD_IOMEM=y
CONFIG_CMD_IMD=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_ARM_MMUINFO=y
CONFIG_CMD_VERSION=y
#
# Boot
#
CONFIG_FLEXIBLE_BOOTARGS=y
CONFIG_CMD_BOOT=y
CONFIG_CMD_BOOTM=y
CONFIG_CMD_BOOTM_SHOW_TYPE=y
CONFIG_CMD_BOOTM_VERBOSE=y
CONFIG_CMD_BOOTM_INITRD=y
CONFIG_CMD_BOOTM_OFTREE=y
# CONFIG_CMD_BOOTM_OFTREE_UIMAGE is not set
# CONFIG_CMD_BOOTM_AIMAGE is not set
# CONFIG_CMD_BOOTU is not set
# CONFIG_CMD_BOOTZ is not set
CONFIG_CMD_GO=y
CONFIG_CMD_LOADB=y
# CONFIG_CMD_LOADS is not set
# CONFIG_CMD_LOADY is not set
CONFIG_CMD_RESET=y
# CONFIG_CMD_UIMAGE is not set
#
# Partition
#
CONFIG_CMD_PARTITION=y
CONFIG_CMD_AUTOMOUNT=y
CONFIG_CMD_MOUNT=y
CONFIG_CMD_UBI=y
CONFIG_CMD_UBIFORMAT=y
CONFIG_CMD_UMOUNT=y
#
# Environment
#
CONFIG_CMD_NV=y
CONFIG_CMD_EXPORT=y
CONFIG_CMD_DEFAULTENV=y
CONFIG_CMD_GLOBAL=y
CONFIG_CMD_LOADENV=y
CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
CONFIG_CMD_SAVEENV=y
#
# File
#
CONFIG_CMD_BASENAME=y
CONFIG_CMD_CAT=y
CONFIG_CMD_CD=y
CONFIG_CMD_CP=y
# CONFIG_CMD_CMP is not set
CONFIG_CMD_DIGEST=y
CONFIG_CMD_DIRNAME=y
CONFIG_CMD_FILETYPE=y
CONFIG_CMD_LN=y
CONFIG_CMD_LS=y
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MKDIR=y
CONFIG_CMD_PWD=y
CONFIG_CMD_READLINK=y
CONFIG_CMD_RM=y
CONFIG_CMD_RMDIR=y
# CONFIG_CMD_SHA1SUM is not set
# CONFIG_CMD_SHA224SUM is not set
# CONFIG_CMD_SHA256SUM is not set
# CONFIG_CMD_SHA384SUM is not set
# CONFIG_CMD_SHA512SUM is not set
CONFIG_CMD_UNCOMPRESS=y
#
# Shell scripting
#
CONFIG_CMD_FALSE=y
CONFIG_CMD_GETOPT=y
CONFIG_CMD_LET=y
CONFIG_CMD_MSLEEP=y
CONFIG_CMD_READF=y
CONFIG_CMD_SLEEP=y
CONFIG_CMD_TEST=y
CONFIG_CMD_TRUE=y
#
# Network
#
CONFIG_CMD_DHCP=y
# CONFIG_CMD_HOST is not set
CONFIG_NET_CMD_IFUP=y
CONFIG_CMD_MIITOOL=y
CONFIG_CMD_PING=y
CONFIG_CMD_TFTP=y
#
# Console and Framebuffer interaction
#
CONFIG_CMD_CLEAR=y
CONFIG_CMD_ECHO=y
CONFIG_CMD_ECHO_E=y
CONFIG_CMD_EDIT=y
CONFIG_CMD_LOGIN=y
CONFIG_CMD_MENU=y
# CONFIG_CMD_MENU_MANAGEMENT is not set
CONFIG_CMD_MENUTREE=y
CONFIG_CMD_PASSWD=y
# CONFIG_PASSWD_MODE_HIDE is not set
CONFIG_PASSWD_MODE_STAR=y
# CONFIG_PASSWD_MODE_CLEAR is not set
# CONFIG_CMD_SPLASH is not set
CONFIG_CMD_READLINE=y
CONFIG_CMD_TIMEOUT=y
#
# Memory
#
CONFIG_CMD_CRC=y
CONFIG_CMD_CRC_CMP=y
CONFIG_CMD_MD=y
CONFIG_CMD_MEMCMP=y
CONFIG_CMD_MEMCPY=y
CONFIG_CMD_MEMSET=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_MM=y
CONFIG_CMD_MW=y
#
# Hardware manipulation
#
CONFIG_CMD_DETECT=y
CONFIG_CMD_FLASH=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_LED=y
CONFIG_CMD_NAND=y
CONFIG_CMD_LED_TRIGGER=y
CONFIG_CMD_USBGADGET=y
#
# Miscellaneous
#
# CONFIG_CMD_2048 is not set
CONFIG_CMD_BAREBOX_UPDATE=y
# CONFIG_CMD_FIRMWARELOAD is not set
CONFIG_CMD_OF_DUMP=y
CONFIG_CMD_OF_NODE=y
CONFIG_CMD_OF_PROPERTY=y
CONFIG_CMD_OF_DISPLAY_TIMINGS=y
CONFIG_CMD_OFTREE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_STATE=y
CONFIG_CMD_BOOTCHOOSER=y
CONFIG_NET=y
CONFIG_NET_NFS=y
CONFIG_NET_NETCONSOLE=y
CONFIG_NET_RESOLV=y
CONFIG_NET_IFUP=y
#
# Drivers
#
CONFIG_OFTREE=y
CONFIG_OFTREE_MEM_GENERIC=y
CONFIG_DTC=y
CONFIG_OFDEVICE=y
CONFIG_OF_NET=y
CONFIG_OF_GPIO=y
CONFIG_OF_BAREBOX_DRIVERS=y
#
# serial drivers
#
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
# CONFIG_DRIVER_SERIAL_CADENCE is not set
CONFIG_PHYLIB=y
#
# Network drivers
#
# CONFIG_DRIVER_NET_ARC_EMAC is not set
# CONFIG_DRIVER_NET_CALXEDA_XGMAC is not set
CONFIG_DRIVER_NET_CPSW=y
# CONFIG_DRIVER_NET_DESIGNWARE is not set
# CONFIG_DRIVER_NET_KS8851_MLL is not set
# CONFIG_DRIVER_NET_SMC911X is not set
# CONFIG_DRIVER_NET_SMC91111 is not set
#
# phylib
#
#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
CONFIG_MICREL_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_SMSC_PHY is not set
#
# MII bus device drivers
#
#
# SPI drivers
#
# CONFIG_SPI is not set
CONFIG_I2C=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_OMAP=y
CONFIG_MTD=y
CONFIG_MTD_WRITE=y
CONFIG_MTD_OOB_DEVICE=y
# CONFIG_MTD_RAW_DEVICE is not set
#
# Self contained MTD devices
#
# CONFIG_MTD_DOCG3 is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_DRIVER_CFI is not set
CONFIG_NAND=y
CONFIG_NAND_ECC_SOFT=y
# CONFIG_NAND_ECC_BCH is not set
CONFIG_NAND_ECC_HW=y
# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
CONFIG_NAND_ECC_HW_SYNDROME=y
CONFIG_NAND_ECC_HW_NONE=y
CONFIG_NAND_INFO=y
CONFIG_NAND_READ_OOB=y
CONFIG_NAND_BBT=y
# CONFIG_NAND_ALLOW_ERASE_BAD is not set
CONFIG_NAND_OMAP_GPMC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_DISK is not set
CONFIG_USB=y
# CONFIG_USB_HOST is not set
CONFIG_USB_GADGET=y
#
# USB Gadget drivers
#
CONFIG_USB_GADGET_DFU=y
CONFIG_USB_GADGET_SERIAL=y
# CONFIG_USB_GADGET_FASTBOOT is not set
CONFIG_USB_MUSB=y
CONFIG_USB_MUSB_DSPS=y
CONFIG_USB_MUSB_AM335X=y
CONFIG_USB_MUSB_GADGET=y
# CONFIG_VIDEO is not set
# CONFIG_MCI is not set
CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
#
# MFD
#
# CONFIG_MFD_ACT8846 is not set
# CONFIG_MFD_LP3972 is not set
# CONFIG_MFD_MC13XXX is not set
# CONFIG_MFD_MC34704 is not set
# CONFIG_MFD_MC9SDZ60 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TWL4030 is not set
# CONFIG_MFD_TWL6030 is not set
#
# Misc devices
#
# CONFIG_JTAG is not set
# CONFIG_SRAM is not set
CONFIG_STATE_DRV=y
CONFIG_BOOTSTATE_DRV=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
CONFIG_LED_GPIO_OF=y
# CONFIG_LED_GPIO_RGB is not set
# CONFIG_LED_GPIO_BICOLOR is not set
CONFIG_LED_TRIGGERS=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
#
# Input device support
#
CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_WATCHDOG is not set
# CONFIG_PWM is not set
#
# DMA support
#
CONFIG_GPIOLIB=y
#
# GPIO
#
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
# CONFIG_GPIO_IMX is not set
# CONFIG_GPIO_MXS is not set
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_W1 is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
#
# Bus devices
#
CONFIG_BUS_OMAP_GPMC=y
# CONFIG_REGULATOR is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_RTC_CLASS is not set
#
# Firmware Drivers
#
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
#
# Filesystem support
#
CONFIG_FS=y
CONFIG_FS_AUTOMOUNT=y
# CONFIG_FS_CRAMFS is not set
# CONFIG_FS_EXT4 is not set
CONFIG_FS_RAMFS=y
CONFIG_FS_DEVFS=y
CONFIG_FS_TFTP=y
CONFIG_FS_NFS=y
# CONFIG_FS_FAT is not set
CONFIG_FS_UBIFS=y
CONFIG_FS_UBIFS_COMPRESSION_LZO=y
CONFIG_FS_UBIFS_COMPRESSION_ZLIB=y
# CONFIG_FS_BPKFS is not set
# CONFIG_FS_UIMAGEFS is not set
#
# Library routines
#
CONFIG_PARAMETER=y
CONFIG_UNCOMPRESS=y
CONFIG_ZLIB=y
# CONFIG_BZLIB is not set
# CONFIG_LZ4_DECOMPRESS is not set
# CONFIG_XZ_DECOMPRESS is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_QSORT=y
CONFIG_LIBSCAN=y
CONFIG_LIBUBIGEN=y
CONFIG_LIBMTD=y
#
# Library gui routines
#
CONFIG_CRC32=y
CONFIG_CRC16=y
CONFIG_DIGEST=y
CONFIG_MD5=y
CONFIG_SHA1=y
# CONFIG_DIGEST_MD5_GENERIC is not set
CONFIG_DIGEST_SHA1_GENERIC=y
# CONFIG_DIGEST_SHA224_GENERIC is not set
# CONFIG_DIGEST_SHA256_GENERIC is not set
# CONFIG_DIGEST_SHA384_GENERIC is not set
# CONFIG_DIGEST_SHA512_GENERIC is not set
# CONFIG_DIGEST_HMAC_GENERIC is not set
# CONFIG_DIGEST_SHA1_ARM is not set
# CONFIG_DIGEST_SHA256_ARM is not set

31
meta-sysmocom-bsp/recipes-bsp/barebox/barebox-gsmk-owhw_git.bb Normal file
View File

@ -0,0 +1,31 @@
require barebox.inc
RDEPENDS_${PN} += "${PN}-mlo"
SRCREV = "4d1c656aa7ba155d8a555602d832ff1fc76d63f8"
SRC_URI = " \
git://git.sysmocom.de/barebox.git;branch=v2015.06 \
file://defconfig \
"
PV = "v2015.06+git${SRCPV}"
S = "${WORKDIR}/git"
BAREBOX_IMAGE ?= "barebox-${MACHINE}-${PKGV}-${PKGR}.img"
BAREBOX_SYMLINK ?= "barebox-${MACHINE}.img"
# generated using echo -n 'owhw-stop' | sha1sum
BAREBOX_PASSWORD = "d797c986b04cdcb86206a990908e27f8c3ae96b4"
do_configure_append () {
mkdir -p ${WORKDIR}/env/nv
echo 5 > ${WORKDIR}/env/nv/login.timeout
}
do_deploy_append () {
install -d ${DEPLOYDIR}
install ${S}/images/barebox-am33xx-gsmk-owhw.img ${DEPLOYDIR}/${BAREBOX_IMAGE}
cd ${DEPLOYDIR}
rm -f ${BAREBOX_SYMLINK}
ln -sf ${BAREBOX_IMAGE} ${BAREBOX_SYMLINK}
}

2
meta-sysmocom-bsp/recipes-bsp/barebox/barebox-sysmobts_git.bb
View File

@ -1,6 +1,6 @@
require barebox.inc
SRCREV = "95e1a85cb276362e0b76396841e4e6988ab523b0"
SRCREV = "34a48171a699560d8a41d00d2c07ed37a79c00d8"
SRC_URI = " \
git://git.sysmocom.de/barebox.git;branch=v2015.06 \
file://defconfig \

2
meta-sysmocom-bsp/recipes-bsp/barebox/barebox-sysmocom-odu-mlo_git.bb
View File

@ -1,6 +1,6 @@
require barebox.inc
SRCREV = "95e1a85cb276362e0b76396841e4e6988ab523b0"
SRCREV = "34a48171a699560d8a41d00d2c07ed37a79c00d8"
SRC_URI = " \
git://git.sysmocom.de/barebox.git;branch=v2015.06 \
file://defconfig \

2
meta-sysmocom-bsp/recipes-bsp/barebox/barebox-sysmocom-odu_git.bb
View File

@ -2,7 +2,7 @@ require barebox.inc
RDEPENDS_${PN} += "${PN}-mlo"
SRCREV = "95e1a85cb276362e0b76396841e4e6988ab523b0"
SRCREV = "34a48171a699560d8a41d00d2c07ed37a79c00d8"
SRC_URI = " \
git://git.sysmocom.de/barebox.git;branch=v2015.06 \
file://defconfig \

2
meta-sysmocom-bsp/recipes-bsp/linux-backports/linux-backports_3.18.1.1.bb
View File

@ -4,7 +4,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
inherit sysmocom-module
PR = "r2"
PR = "r3"
SRC_URI = "http://www.kernel.org/pub/linux/kernel/projects/backports/stable/v3.18.1/backports-3.18.1-1.tar.xz \
file://dont-export-clk_enable-twice.patch \

6
meta-sysmocom-bsp/recipes-bsp/linux/linux-sysmocom_git.bb → meta-sysmocom-bsp/recipes-bsp/linux/linux-sysmocom_3.10.bb
View File

@ -7,18 +7,18 @@ DEPENDS += "bc-native"
# reverse dependency tracking for the kernel doesn't appear to work. So
# please bump the PR on version changes!
# at versions changes do not forget to update conf/machine/include/sysmobts.inc too
LINUX_VERSION ?= "3.10.80"
LINUX_VERSION ?= "3.10.84"
LINUX_VERSION_EXTENSION ?= "-sysmocom-${LINUX_KERNEL_TYPE}"
# Overrides for the sysmocom bts v2
BTS_FIRMWARE_NAME_sysmobts-v2 = "sysmobts-v2"
SRCREV = "3122273386e140378bfc7f8ec5d76e4e04c32ad1"
SRCREV = "60c9ebbd1a683e8691223042a12958c5dc661feb"
PR = "r43"
PV = "${LINUX_VERSION}+git${SRCPV}"
SRC_URI = "git://git.sysmocom.de/sysmo-bts/linux.git;protocol=git;branch=linux-3.10.80 \
SRC_URI = "git://git.sysmocom.de/sysmo-bts/linux.git;protocol=git;branch=linux-3.10.84 \
file://defconfig"
S = "${WORKDIR}/git"

34
meta-sysmocom-bsp/recipes-bsp/ntp/files/ntpdate-cron Normal file
View File

@ -0,0 +1,34 @@
#!/bin/sh
# script installed as cronjob for handling
# machines which have not ntp or systemd-timessyncd installed
#
# (C) 2015 by sysmocom - s.f.m.c. GmbH
# Author: Henning Heinold
RUN_NTPDATE=1
# check for systemd otherwise assume sysvinit with ps
systemctl > /dev/null 2>&1
if [ $? -eq 0 ]; then
systemctl status ntpd > /dev/null 2>&1 || systemctl status systemd-timesyncd > /dev/null 2>&1
else
PS="ps"
ps -ef > /dev/null 2>&1
if [ $? -eq 0 ]; then
PS="ps -ef"
fi
# poor man search for a running ntpd
# under sysvinit we have no systemd-timesyncd
$PS | grep -v grep | grep "ntpd " > /dev/null 2>&1
fi
RUN_NTPDATE=$?
# the commands must fail to run ntpdate
if [ ${RUN_NTPDATE} -ne 0 ]; then
__bindir__/ntpdate-sync silent
fi

1
meta-sysmocom-bsp/recipes-bsp/ntp/files/ntpdate.cron Normal file
View File

@ -0,0 +1 @@
*/30 * * * * root __bindir__/ntpdate-cron

29
meta-sysmocom-bsp/recipes-bsp/ntp/ntp_4.2.8p1.bb
View File

@ -21,9 +21,11 @@ SRC_URI = "http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2/ntp-${PV}.tar.g
file://sntp.service \
file://sntp \
file://ntpd.list \
file://ntpdate-cron \
file://ntpdate.cron \
"
PR = "r7"
PR = "r9"
SRC_URI[md5sum] = "65d8cdfae4722226fbe29863477641ed"
SRC_URI[sha256sum] = "948274b88f1ed002d867ced6aaefdfd0999668b11285ac2b3a67ff2629d59d88"
@ -64,6 +66,8 @@ do_install_append() {
install -m 755 ${WORKDIR}/ntpd ${D}${sysconfdir}/init.d
install -d ${D}${bindir}
install -m 755 ${WORKDIR}/ntpdate ${D}${bindir}/ntpdate-sync
install -m 755 ${WORKDIR}/ntpdate-cron ${D}${bindir}/ntpdate-cron
install -D -m 0644 ${WORKDIR}/ntpdate.cron ${D}${sysconfdir}/cron.d/ntpdate
install -m 755 -d ${D}${NTP_USER_HOME}
chown ntp:ntp ${D}${NTP_USER_HOME}
@ -74,6 +78,8 @@ do_install_append() {
sed -i 's!/etc/!${sysconfdir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
sed -i 's!/var/!${localstatedir}/!g' ${D}${sysconfdir}/init.d/ntpd ${D}${bindir}/ntpdate-sync
sed -i 's!^PATH=.*!PATH=${base_sbindir}:${base_bindir}:${sbindir}:${bindir}!' ${D}${bindir}/ntpdate-sync
sed -i 's!__bindir__!${bindir}!g' ${D}${bindir}/ntpdate-cron
sed -i 's!__bindir__!${bindir}!g' ${D}${sysconfdir}/cron.d/ntpdate
sed -i '1s,#!.*perl -w,#! ${bindir}/env perl,' ${D}${sbindir}/ntptrace
sed -i '/use/i use warnings;' ${D}${sbindir}/ntptrace
sed -i '1s,#!.*perl,#! ${bindir}/env perl,' ${D}${sbindir}/ntp-wait
@ -136,6 +142,8 @@ FILES_ntpdate = "${sbindir}/ntpdate \
${bindir}/ntpdate-sync \
${sysconfdir}/default/ntpdate \
${systemd_unitdir}/system/ntpdate.service \
${bindir}/ntpdate-cron \
${sysconfdir}/cron.d/ntpdate \
"
FILES_sntp = "${sbindir}/sntp \
${sysconfdir}/default/sntp \
@ -143,17 +151,24 @@ FILES_sntp = "${sbindir}/sntp \
"
CONFFILES_${PN} = "${sysconfdir}/ntp.conf"
CONFFILES_ntpdate = "${sysconfdir}/default/ntpdate"
CONFFILES_ntpdate = "${sysconfdir}/default/ntpdate ${sysconfdir}/cron.d/ntpdate"
INITSCRIPT_NAME = "ntpd"
# No dependencies, so just go in at the standard level (20)
INITSCRIPT_PARAMS = "defaults"
pkg_postinst_ntpdate() {
if ! grep -q -s ntpdate $D/var/spool/cron/root; then
echo "adding crontab"
test -d $D/var/spool/cron || mkdir -p $D/var/spool/cron
echo "30 * * * * ${bindir}/ntpdate-sync silent" >> $D/var/spool/cron/root
if grep -q -s ntpdate $D/var/spool/cron/root; then
echo "comment the old crontab entry"
sed -i -e "/^[^#]/ s/\(.*\)\(.*ntpdate-sync.*$\)/#\1\2/g" $D/var/spool/cron/root
fi
if [ "x$D" != "x" ]; then
exit 0
fi
systemctl status crond > /dev/null 2>&1
if [ $? -eq 0 ]; then
systemctl restart crond
else
/etc/init.d/cron restart
fi
}

12
meta-sysmocom-bsp/recipes-config/sysmocom-configure/files/multi-user.target.sh Normal file
View File

@ -0,0 +1,12 @@
#!/bin/sh
set -eu
TEST_VALUE="default"
. /slot/system.conf
cat >/etc/symocom/test.cfg <<EOF
[main]
bla=$TEST_VALUE
EOF

12
meta-sysmocom-bsp/recipes-config/sysmocom-configure/files/osmo-bsc.service.sh Normal file
View File

@ -0,0 +1,12 @@
#!/bin/sh
set -eu
OSMOBSC_VALUE="bar"
. /slot/system.conf
cat >/etc/osmocom/osmo-bsc.cfg <<EOF
#dummy: OSMOBSC_VALUE=$OSMOBSC_VALUE
EOF

11
meta-sysmocom-bsp/recipes-config/sysmocom-configure/files/sysmocom-bsc/multi-user.target.sh Normal file
View File

@ -0,0 +1,11 @@
#!/bin/sh
TEST_VALUE="default"
. /slot/system.conf
cat >/etc/sysmocom/test.cfg <<EOF
[main]
bla=$TEST_VALUE
model=sysmocom-bsc
EOF

32
meta-sysmocom-bsp/recipes-config/sysmocom-configure/files/sysmocom-generator Executable file
View File

@ -0,0 +1,32 @@
#!/bin/sh
if [ ! -e /slot/system.conf ]; then
exit 0
fi
. /slot/system.conf
for HANDLER in $(ls /etc/sysmocom/configure.d/*.sh); do
UNIT=$(basename "$HANDLER" .sh)
cat >$1/${UNIT//./-}-configure.service <<EOF
[Unit]
Description=Generate $UNIT Configuration
After=sysmocom-restore.service
Before=$UNIT
[Service]
Type=oneshot
RemainAfterExit=true
ExecStart=$HANDLER
EOF
mkdir -p $1/$UNIT.wants
ln -s /lib/systemd/system/${UNIT//./-}-configure.service $1/$UNIT.wants/
done
if [ -n "$OSMOBSC_ENABLED" ]; then
ln -s /lib/systemd/system/osmo-bsc.service $1/multi-user.target.wants/
fi
if [ -n "$OSMONITB_ENABLED" ]; then
ln -s /lib/systemd/system/osmo-nitb.service $1/multi-user.target.wants/
fi

19
meta-sysmocom-bsp/recipes-config/sysmocom-configure/sysmocom-configure_1.0.bb Normal file
View File

@ -0,0 +1,19 @@
DESCRIPTION = "sysmocom configuration scripts"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
SRC_URI = " \
file://sysmocom-generator \
file://multi-user.target.sh \
file://osmo-bsc.service.sh \
"
do_install() {
install -d ${D}${systemd_unitdir}/system-generators
install -m 0755 ${WORKDIR}/sysmocom-generator ${D}${systemd_unitdir}/system-generators/
install -d ${D}${sysconfdir}/sysmocom/configure.d
install -m 0755 ${WORKDIR}/*.sh ${D}${sysconfdir}/sysmocom/configure.d/
}
FILES_${PN} += "${systemd_unitdir}/system-generators"

1
meta-sysmocom-bsp/recipes-core/images/image-rauc-install-initramfs.bb
View File

@ -7,6 +7,7 @@ PACKAGE_INSTALL = "initramfs-framework-base initramfs-module-debug initramfs-mod
#export IMAGE_BASENAME = "core-image-minimal-initramfs"
IMAGE_LINGUAS = ""
FEED_URIS=""
LICENSE = "MIT"

1
meta-sysmocom-bsp/recipes-core/images/image-rauc-rescue-initramfs.bb
View File

@ -3,6 +3,7 @@ DESCRIPTION = "rescue initramfs"
PACKAGE_INSTALL = "task-core-boot ${ROOTFS_PKGMANAGE_BOOTSTRAP} ${ROOTFS_PKGMANAGE} rauc dropbear"
IMAGE_LINGUAS = ""
FEED_URIS=""
LICENSE = "MIT"

3
meta-sysmocom-bsp/recipes-core/images/image-rauc-slot-initramfs.bb
View File

@ -1,12 +1,13 @@
DESCRIPTION = "slot initramfs"
PACKAGE_INSTALL = "initramfs-framework-base initramfs-module-debug initramfs-module-rauc-overlay busybox base-passwd ${ROOTFS_BOOTSTRAP_INSTALL}"
PACKAGE_INSTALL = "initramfs-framework-base initramfs-module-debug initramfs-module-rauc-overlay initramfs-module-rauc-backup busybox base-passwd ${ROOTFS_BOOTSTRAP_INSTALL}"
# Do not pollute the initrd image with rootfs features
#IMAGE_FEATURES = ""
#export IMAGE_BASENAME = "core-image-minimal-initramfs"
IMAGE_LINGUAS = ""
FEED_URIS=""
LICENSE = "MIT"

2
meta-sysmocom-bsp/recipes-core/images/image-rauc-ubi.bb
View File

@ -65,7 +65,7 @@ do_deploy() {
echo vol_name=data >> ubinize.cfg
echo vol_flags=autoresize >> ubinize.cfg
mkfs.ubifs -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rescue.ubifs ${MKUBIFS_ARGS}
mkfs.ubifs --squash-uids -r ${IMAGE_ROOTFS} -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rescue.ubifs ${MKUBIFS_ARGS}
ubinize -o ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.ubi ${UBINIZE_ARGS} ubinize.cfg
ln -sf ${IMAGE_NAME}.ubi ${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.ubi
}

2
meta-sysmocom-bsp/recipes-core/initrdscripts/initramfs-rauc-install/install
View File

@ -152,7 +152,7 @@ menuentry "Slot A (OK=\$A_OK TRY=\$A_TRY)" ${ENTRY_ARGS}{
}
menuentry "Slot B (OK=\$B_OK TRY=\$B_TRY)" ${ENTRY_ARGS}{
linux (hd0,3)/kernel root=${INSTALL_TGT3} \$CMDLINE rauc.slot=B
linux (hd0,3)/kernel root=${INSTALL_TGT}3 \$CMDLINE rauc.slot=B
initrd (hd0,3)/initramfs
}
EOF

17
meta-sysmocom-bsp/recipes-core/initrdscripts/initramfs-rauc-slot.bb
View File

@ -2,12 +2,14 @@ SUMMARY = "Modular initramfs system components for RAUC"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
PR = "r1"
PR = "r2"
inherit allarch
SRC_URI = "file://overlay \
file://rescue"
file://rescue \
file://mount_data \
file://restore_backup"
do_install() {
install -d ${D}/init.d
@ -17,10 +19,15 @@ do_install() {
# rescue
install -m 0755 ${WORKDIR}/rescue ${D}/init.d/10-rescue
# backup
install -m 0755 ${WORKDIR}/mount_data ${D}/init.d/25-mount_data
install -m 0755 ${WORKDIR}/restore_backup ${D}/init.d/26-restore_backup
}
PACKAGES = "initramfs-module-rauc-overlay \
initramfs-module-rauc-rescue"
initramfs-module-rauc-rescue \
initramfs-module-rauc-backup"
SUMMARY_initramfs-module-rauc-overlay = "initramfs support for overlayfs (ubifs&squashfs)"
RDEPENDS_initramfs-module-rauc-overlay = "initramfs-framework-base"
@ -29,3 +36,7 @@ FILES_initramfs-module-rauc-overlay = "/init.d/20-overlay"
SUMMARY_initramfs-module-rauc-rescue = "initramfs rescue mode support"
RDEPENDS_initramfs-module-rauc-rescue = "initramfs-framework-base"
FILES_initramfs-module-rauc-rescue = "/init.d/10-rescue"
SUMMARY_initramfs-module-rauc-backup = "initramfs backup restore support"
RDEPENDS_initramfs-module-rauc-backup = "initramfs-module-rauc-overlay"
FILES_initramfs-module-rauc-backup = "/init.d/25-mount_data /init.d/26-restore_backup"

31
meta-sysmocom-bsp/recipes-core/initrdscripts/initramfs-rauc-slot/restore_backup Normal file
View File

@ -0,0 +1,31 @@
#!/bin/sh
BACKUP_FILE=/rootfs/data/sysmocom-backup.tar
restore_backup_enabled() {
if [ ! -e "$BACKUP_FILE" ] ; then
info "The backup file '$BACKUP_FILE' does not exist, skipping restore..."
return 1
fi
return 0
}
restore_backup_extract() {
# List the files and check if grep hits something
SEARCH=`tar -tvf $1 | grep $2`
RES=$?
if [ $RES = 0 ]; then
tar -C /rootfs/tmp/ -xvf $1 $2
cp -a /rootfs/tmp/content/* /rootfs/
rm -rf /rootfs/tmp/content
else
echo "Directory '$2' is not in backup '$1'."
fi
}
restore_backup_run() {
info "Extracting files from the backup '$BACKUP_FILE'"
restore_backup_extract $BACKUP_FILE content/etc || fatal "Failed!"
restore_backup_extract $BACKUP_FILE content/var/lib/osmocom || fatal "Failed!"
}

11
meta-sysmocom-bsp/recipes-core/initrdscripts/initramfs-rauc-slot/sysmobts-v2/mount_data Normal file
View File

@ -0,0 +1,11 @@
#!/bin/sh
mount_data_enabled() {
return 0
}
mount_data_run() {
info "Mounting data..."
mkdir -p /rootfs/data
mount -t ubifs ubi0:data /rootfs/data
}

11
meta-sysmocom-bsp/recipes-core/initrdscripts/initramfs-rauc-slot/sysmocom-bsc/mount_data Normal file
View File

@ -0,0 +1,11 @@
#!/bin/sh
mount_data_enabled() {
return 0
}
mount_data_run() {
info "Mounting data..."
mkdir -p /rootfs/data
mount -t ext4 /dev/sda4 /rootfs/data
}

11
meta-sysmocom-bsp/recipes-core/initrdscripts/initramfs-rauc-slot/sysmocom-odu/mount_data Normal file
View File

@ -0,0 +1,11 @@
#!/bin/sh
mount_data_enabled() {
return 0
}
mount_data_run() {
info "Mounting data..."
mkdir -p /rootfs/data
mount -t ubifs ubi0:data /rootfs/data
}

2
meta-sysmocom-bsp/recipes-extra/ca-certificates/ca-certificates_20120623.bb
View File

@ -4,7 +4,7 @@ SECTION = "misc"
LICENSE = "GPLv2+"
LIC_FILES_CHKSUM = "file://debian/copyright;md5=6135800ff6d893c7904d7aad90972eb5"
SRC_URI = "${DEBIAN_MIRROR}/main/c/ca-certificates/ca-certificates_${PV}.tar.gz \
SRC_URI = "https://launchpad.net/ubuntu/+archive/primary/+files/ca-certificates_${PV}.tar.gz \
file://0001-update-ca-certificates-remove-c-rehash.patch"
SRC_URI[md5sum] = "5105d4cc086f0d4ecf7bf2e4c4667289"

2
meta-sysmocom-bsp/recipes-extra/lm_sensors/lmsensors-apps_3.2.0.bb
View File

@ -7,7 +7,7 @@ PR = "r5"
DEPENDS = "bison-native flex-native"
PACKAGE_ARCH = "${MACHINE_ARCH}"
SRC_URI = "http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-${PV}.tar.bz2"
SRC_URI = "https://downloads.openwrt.org/sources/lm_sensors-${PV}.tar.bz2"
SRC_URI[md5sum] = "829d88fb09d67723fbf42853eb84d1fd"
SRC_URI[sha256sum] = "bde7e1d8b473bca6528694b696668c4cd0a28515aef36b961e4f7d8a6b47e581"

4
meta-sysmocom-bsp/recipes-extra/rauc/rauc.bb
View File

@ -1,7 +1,7 @@
DESCRIPTION = "rauc update controller"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM = "file://COPYING;md5=4fbd65380cdd255951079008b364516c"
PR = "r4"
PR = "r0"
SRC_URI = "git://github.com/jluebbe/rauc.git;protocol=https \
file://dev-ca.pem \
@ -13,7 +13,7 @@ PV = "0+git${SRCPV}"
S = "${WORKDIR}/git"
SRCREV = "d44adb00797d42efdd5f55064b0f3943906b081f"
SRCREV = "011953fa6c824ca518cf0ea074ddeede3726bdcd"
DEPENDS = "curl openssl glib-2.0"

6
meta-sysmocom-bsp/recipes-sysmobts/osmo-pcu/osmo-pcu_git.bb
View File

@ -2,10 +2,10 @@ DESCRIPTION = "Osmocom PCU for sysmoBTS"
LICENSE = "GPLv2"
LIC_FILES_CHKSUM="file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
SRC_URI = "git://git.osmocom.org/osmo-pcu.git;protocol=git;branch=jerlbeck/master"
SRCREV = "1c3b8998bc6d9d6f78a2bc29ac1f0ba9cffa4fb8"
SRC_URI = "git://git.osmocom.org/osmo-pcu.git;protocol=git;branch=master"
SRCREV = "7c8d39a67b7568cda38829c774ea541250f3142f"
PV = "0.4+git${SRCPV}"
PR = "r3.${META_TELEPHONY_OSMO_INC}"
PR = "r4.${META_TELEPHONY_OSMO_INC}"
S = "${WORKDIR}/git"
DEPENDS = "libosmocore femtobts-api osmo-bts"

2
meta-sysmocom-bsp/recipes-sysmobts/uboot/u-boot_sysmocom.inc
View File

@ -1,5 +1,5 @@
SRC_URI = "git://git.sysmocom.de/sysmo-bts/u-boot;branch=v2011.12;protocol=git"
SRCREV = "71497512280c9eac9be739ae0ca20eb21556bb92"
SRCREV = "f6453a391125f824ebf5bab00ee03b6d73ae5695"
PV = "v2011.12+git${SRCPV}"
S = "${WORKDIR}/git"

0
meta-sysmocom-bsp/yocto-master/opkg_0.2.4.bbappend → meta-sysmocom-bsp/yocto-master/opkg_%.bbappend
View File

0
meta-sysmocom-bsp/yocto-master/systemd_219.bbappend → meta-sysmocom-bsp/yocto-master/systemd_%.bbappend
View File