The U-Boot configuration has been consolidates into a single class to
avoid code duplication. This is now done by uboot-config class, so we
now use it.
(From OE-Core rev: d0bc7a53b1e61283fb155b4dcb67bc2ab3b1d7f0)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The UBOOT_MACHINE variable needs to be set so the firmware utils can
know about some configuration settings which are board dependent. This
patch ensures the package is skipped in case UBOOT_MACHINE is unset
thus avoid its build in 'bitbake world' builds for incompatible
machines.
Fixes [YOCTO: #5223]
(From OE-Core rev: d9abcc0a2a691ca60cc1cb2f48f1748b0de73ac8)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The latest upgrade changed u-boot-fw-utils to u-boot-fw-utils-cross, which
removed the on-target fw_printenv (and fw_setenv).
Re-create the updated version of the u-boot-fw-utils recipe.
U-Boot does try to strip the fw_printenv binary by default now. To avoid
this, without patching the Makefile, we add HOSTSTRIP=true to EXTRA_OEMAKE.
The new U-Boot do also require us to configure the build for a specific
machine, thus we change the package arch.§
(From OE-Core rev: 83cb07047658e2e2b2d721e1b01553d4df3d8636)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This upgrades the U-Boot based recipes for 2013.07 release.
This removes the 2011.03, 2011.06 and 2013.01.01 versions so we keep a
single one in core. The following recipes has been upgraded:
- u-boot (remove old versions)
- u-boot-mkimage (remove old versions)
- u-boot-fw-utils -> u-boot-fw-utils-cross (renamed and reworked)
The u-boot-fw-utils-cross recipe has been reworked as it uses the
UBOOT_MACHINE to find default environment for use so it is indeed a
cross binary and not a native one.
(From OE-Core rev: c5fff5748e0aaf7e135fdd464c2104b1d3cbfd5a)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.
(From OE-Core rev: a2bab241c64428d5109c3c5ac5de4463fbad70c5)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user accidently tries building u-boot on a machine doesn't use u-boot
(such as qemuarm) the error message doesn't make it clear why u-boot was
skipped. To help, state the machine that was being built for again.
[ YOCTO #4945 ]
(From OE-Core rev: beef66beaee926ec3d3640b79133fdb2ccc404f0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add a variable called UBOOT_LOCALVERSION which when set will
place a version string in the .scmversion file of the u-boot
sources. This string will be picked up by the u-boot Makefile
and will be appended to the u-boot version. This is done to
make it easier to identify what revision of the u-boot sources
are being run. For example you can use a setting like the
following to add the short commit id to the u-boot version
string:
UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
(From OE-Core rev: 566298409408c6103f7a9871bb13ae5449c4fd64)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support for board specific fw_env.config file if available.
(From OE-Core rev: 5b6a8e987f9039aca63d97bc42421b78acab8a3d)
Signed-off-by: Franklin S. Cooper Jr <fcooper27jr@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* with old regexp it wasn't reentrant, causing stuff like this:
-LD = $(CROSS_COMPILE)ld
+LD = $(CROSS_COMPILE)ld.bfd.bfd
-LDR = $(CROSS_COMPILE)ldr
+LDR = $(CROSS_COMPILE)ld.bfd.bfdr
when do_compile was reexecuted, also breaking LDR variable and
http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/tree/recipes-bsp/u-boot/u-boot/0001-config-Always-use-GNU-ld.patch
when it was used together with u-boot.inc from oe-core (meta-ti is using own u-boot.inc)
* This patch is also better solution to ld-is-gold problem then regexp in metadata.
(From OE-Core rev: f78044f85ab1a0acce852a7032fc0c81285cd4c1)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The setting is the same in all recipes, so move it to
the shared settings in u-boot.inc
Since FILESDIR is also being phased out, use the FILESPATH
setting as suggested by Richard Purdie.
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 1b78904b115b50172cf82948d8a68dc3a98005ce)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The u-boot tree is fully capable of parallel builds, so this
setting should not exist as a blanket setting for all of the
recipes. Going forward, if there is a parallelism issue
in u-boot, it needs to be reported and fixed there, and not
with the "make -j1" band-aid approach.
(From OE-Core rev: 7fdd1f82803df9752e908f01f7643d66b82a690e)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't want to force everyone to be stripping the -Os
flags from their u-boot builds. Remove it, since it pertains
to an old toolchain issue that is no longer relevant, and it
breaks the powerpc mpc8315.
(From OE-Core rev: 5e3f777f9fcc986ae66203651830b5765bca49fd)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides the 'fw_setenv' and 'fw_getenv' programs for the target
so that the U-Boot environment can be modified from Linux. These
programs are system-agnostic and rely on a config file that a given BSP
would provide and potentially RRECOMMEND this be installed.
(From OE-Core rev: 4a2543c0641f1df6d74c18cfe0c3ac3cfd50e60c)
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support for different suffixes found with later u-boot
versions which have switched from .bin to .img
* Allow recipes that include u-boot.inc to also package an
SPL if they build one.
* Minimum requirement is to set the SPL_BINARY value to add
the SPL to the u-boot package as well as into the deploy
directory.
(From OE-Core rev: 2965aa2faaccce43f6c3e451c0a2ded3734766e4)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
HOMEPAGE pointed to an sf.net page that said that the
page did not exist any more and after that it redirected
to the denx.de page; updated HOMEPAGE to point to that page
Also improved the description to use the official capitalisation
(From OE-Core rev: e0ebe12541a6628b7629a9be5918d0e7ea92aa33)
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipe dirs normally have the name of the (main) package and the official name is u-boot
(From OE-Core rev: e9899d52ade2181bd97dcf79bec64650e8b0f718)
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otavio Salvador
Anders Darander
Jackie Huang
Laszlo Papp
Ross Burton
Chase Maupin
Radu Moisan
Franklin S. Cooper Jr
Martin Jansa
Matthew McClintock
Paul Gortmaker
Stefan Herbrechtsmeier
Saul Wold
Tom Rini
Frans Meulenbroeks