Added instructions to flash and boot device from USB stick.
[YOCTO #8719]
(From meta-yocto rev: 69d7d159f07eed1ca71f6530e1a7822146878575)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trivial fix
(From meta-yocto rev: 9e71ba9e5d9ce874770e0c2b5c838ec853d16a5d)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated image creation instructions. Used wic images instead
of manually putting rootfs and kernel to SD card.
[YOCTO #8719]
(From meta-yocto rev: 2b030a6061a33334bec63fce23447cbbe1846c86)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was truly dated, update with newer hardware that is
being tested.
Update section on creating USB stick images using wic and alternate EFI_PROVIDER
information about systemd-boot.
(From meta-yocto rev: 4a8f28e2c18211a2cd1b380b0b2c8d175fe1e51a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
EMGD isn't provided in meta-intel anymore, so there's no point telling
people to look there.
(From meta-yocto rev: 9b8ec43df1d288d5360fde85413961a4234e6b17)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
You don't need NFS/TFTP for a plain USB setup.
(From meta-yocto rev: 904facdf56028d63d938e07c459169cbe78ef8fe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
U-boot 2014.07 defaults to using a gzip compressed kernel
image (zImage). A proper change upading KERNEL_IMAGETYPE has already
been introduced to beaglebone machine config. This patch updates manual
steps to creating a SD card image with proper kernel image name.
(From meta-yocto rev: f1b4b97415e3bb16b1b9119e8339e0bf454c7335)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kevin Hao has stepped up to take care of issues specific to the meta-yocto-bsp
hardware reference boards. I'll also serve as a maintaier, so adding my name
as well.
To make this clear, let's add it to the README.hardware file that describes
the boards.
cc: Kevin Hao <kexin.hao@windriver.com>
(From meta-yocto rev: 7ea7fdf4a9ad0fcedf9a939e20146342d6ab1c57)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was some missing details in how to boot from the edgerouter USB
storage. With this update, we have the information required to boot from
either the vfat, or ext3 partition.
[YOCTO #6113]
(From meta-yocto rev: ed2eba333d13cc544648169d06bc47c7e2bbb3f2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* You need a rollover cable for the serial port
* Some minor grammar / typo / formatting fixes
(From meta-yocto rev: 79f01604e672ce0eb7af787c27ec561063222796)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding the summary, preparation and boot information for the newly introduced
edgerouter BSP.
(From meta-yocto rev: cc8c7a3c94d2cafe899adc7f8199237d4a72f205)
Signed-off-by: Yang Wei <Wei.Yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update README.hardware to reflect the recent replacement of
atom-pc with genericx86.
(From meta-yocto rev: 632d92087cebb11ff9cb0110f9dae01d04bdd83b)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Ross Burton <ross.burton@intel.com>
Cc: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel size has grown to a point where the original load address might not work
due to memory region overlap. This updates the instructions to use larger memory
addresses which avoids the problem.
[YOCTO #2430]
(From meta-yocto rev: 6b7cd4aa50f91c4ebb8a61c9d7fea616be63f470)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fix Yocto Project documentation URL
* Indicate physical reference hardware support comes from meta-yocto-bsp
* Remove/replace references to Poky where appropriate
(From meta-yocto rev: e2d620445993d56008e78a7e8463080315828e4c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Note that on some machines booting just stops after the SYSLINUX
version banner is displayed
* Add an instruction to show how to get the geometry information for
the disk
* Specify the number of cylinders when running mkdiskimage as it is
sometimes unable to detect it automatically
* Create the temporary mountpoints before attempting to use them
* Add an instruction to unmount the disk before removing it
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I noticed this while beta testing 1.2. but patch is against master
(latest commit: bcd4d14425).
Instructions specified a null modem. This isn't the case. A straight
serial cable is required. I verified it with my own setup and
Freescale's user manual.
Signed-off-by: Robert Cochran<yocto@mindchasers.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -live and -directdisk images have been superseded in the Yocto
Project 1.1 release, so update the instructions for atom-pc relating to
this change. Also fix a couple of other minor atom-pc related
capitalisation.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Update the instructions for setting up the MPC8315E-RDB so that they are
clearer, use correct filenames, match the other board instructions more
closely, and include a note about dealing with non-default MAC addresses.
Additionally, add a note about ordering MPC8315E-RDBA.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
o Add C4 specific instructions
o Replace poky with core
o Correct a kernel version typo
o Clarify some language to avoid confusion encountered during testing
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Zhao Yi <yi.zhao@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Jeff Osier-mixon <jeffrey.osier-mixon@intel.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Upgrading u-boot is apparently not necessary with current board revisions,
and these instructions may not work properly anyway (our toolchain seems not
to be able to compile u-boot in the way described), and given that they are
potentially risky they should be removed.
(From OE-Core rev: 52a85e805797bff2ec53b2356da8daf224460e9e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add Freescale MPC8315E-RDB instructions (based on Wind River README passed
on by Bruce Ashfield)
* Add short info paragraph for RouterStation Pro (to match BeagleBoard)
* Add example for connecting to RouterStation Pro serial console with picocom
(From OE-Core rev: 58d443a2ff300ff290486b2153f8a90a8ca2a89b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Update to refer to Yocto documentation
* Change title as suggested by Scott Rifenbark
* List all qemu* machine targets
* Remove machines no longer in core layer
* Add instructions for routerstationpro (originally based on an email from
Mark Hatle)
(From OE-Core rev: f8e9b15aa694b0f6d3373c2b6bf8904fdb0c7b86)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the README.hardware beagleboard description to account for the use
of the OMAP_SERIAL in recent kernel recipes. Add a note documenting how to
use the old 8250 based serial devices for older kernels.
Correct a type.
Correct the boot script name from user.scr to boot.scr.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Gary Thomas <gary@mlbassoc.com>
Document the install and boot process for the Beagleboard xM with
provisions for the C4. I need someone with a C4 board to validate
the steps.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Scott Rifenbark <scott.m.rifenbark@intel.com>
Cover the basics of flashing images to physical media for the Atom PC MACHINE,
as well as dealing with BIOSs that can only boot USB media in USB-ZIP mode.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Ed Bartosh
Maxin B. John
Saul Wold
Paul Eggleton
Maciej Borzecki
Kevin Hao
Bruce Ashfield
Denys Dmytriyenko
Richard Purdie
Yang Wei
Ross Burton
Darren Hart
Bob Cochran
Robert Bradford
Richard Purdie
Marcin Juszkiewicz