The "User-Space Tools" section incorrectly stated that user-space
tools are provided as part of the distribution. The Yocto
Project is not a distribution. So I changed to say that they
are provided as part of the Yocto Project.
(From yocto-docs rev: 03dd97b68a1900959aa51ad6a17547822e8392fc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link to the wiki had some extra instruction in there that
was bogus. I removed that.
(From yocto-docs rev: 9dab5c3c8d0ee2b3ff84a4b94bda8f0420c438f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The start of this manual was odd. I created a new "Introduction"
chapter and inserted it into the build file (adt-manual.xml).
This new chapter introduces the manual. That left the remainder
of the original first chapter to be able to focus on what it
really needed to talk about and that is the ADT. It is a better
organization.
(From yocto-docs rev: 9d489abad9ccd4c0893d7496282f0843d4154942)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This site has disappeared and I don't think there is a
replacement.
(From yocto-docs rev: 711488b664e1da7f3a4c64af3fbd4012bfb44d56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Made "Metadata" the term instead of "metadata".
2. Created a link to "Metadata" term for first use.
3. Fixed a broken link to the LatencyTop site.
(From yocto-docs rev: 7b53ddd0c9c846c558796d8ae6a46c476ab3b68d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleared up some old wording that was confusing the build
system with "Poky". Also, added a note at the front of the
manual to be clear that the ADT is distribution-neutral.
(From yocto-docs rev: 52d090ab931e5cbeffc612b91c11dbb55db15297)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I placed a link on the term "Cross-Development Toolchain" in the
section of the same name. This is to help the user see the
recipes related to the toolchain. The link resolves back into
the "Terms" section of the dev-manual.
(From yocto-docs rev: c77ec0212bcf3b1c5f8079ccf08129ecbefea0aa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added some cross-references to the section that overviews
the user-space tools. Three tools (perf, oprofile, and
systemtap) are in the list. I added appropriate cross
references to the respective tool sections in the YP
Profiling and Tracing Manual.
(From yocto-docs rev: 9b1ee95fa9dd4110f5b4f9e7aeaba63c6ef8b148)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made some minor edits to the book before locking down the
files for 1.3.
(From yocto-docs rev: 2b941103585a31b5dbcb65b784cc3381467ed697)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For 1.3 there is not longer a toolchain tarball. Instead, there
is a wrapper script that lets you install the tarball. This
fundamental usage model change caused several ripples throughout
the documentation set. I have changed wordings and examples
to reflect the new paradigm.
(From yocto-docs rev: afb2069daa91e04c0f78ba425a6b184cb820d888)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed a couple of id strings so that they are not duplicates.
I did this to eliminate a make error while experimenting with creation
of the single HTML YP document comprised of the individual docs.
Changing the id strings has no consequence on the individual Application
Developer's Guide and Kernel Manual.
(From yocto-docs rev: 4e6832eca319a637be693dfe67ee56c540dfddfa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The detailed chapter that describes how to install and configure
the Eclipse Yocto Plug-in has been moved to become a subsection of
the "Workflow" chapter in the YP Development Manual. This commit
accomplished the bulk move, edits to integrate the information,
and fixes to all cross-references. Moving the chapter creates a
sectioning issue in the YP Development manual that results in
subsections that are six levels deep. Not ideal. Will look at
fixing these with a subsequent commit.
(From yocto-docs rev: e6abff8f578f2cf6997895260f607395281ae8e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I edited the text so that the purpose of the manual is clearer.
I have segmented out the ADT into distinct components and made sure
the overviews of each is good. Edits to clarify the role of the
ADT as well.
(From yocto-docs rev: c4abd8305dcdba986f1e761887c740e8322bb331)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes throughout the manual that either eliminate or change
many of the "Yocto Project" strings. The file structure for
the meta data is now called "source directory." The build
directory is referred as just that - "build directory." Any
where the build system is referred to it is called the
"OpenEmbedded build system."
(From yocto-docs rev: 1210c19f90d4a52042fec12657212ae3e58e13d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Conversion of hard links to use the variables set up in the file
documentation/poky.ent.
(From yocto-docs rev: edbacc1b57f02c31ff6eaee666245be83fb17543)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through the manual and made some general formatting changes,
updated some links in anticipation for the 1.1 release.
(From yocto-docs rev: f2d3a012fbe4e8db3cf07e5497acfdf732e55d97)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I provided more detail in the section that introduces QEMU and tells
how it is made available to the user.
(From yocto-docs rev: 9145fee2d550af57669120b1b413585b69ab14bc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The manual previously defined the "ADT" as the toolchain, the sysroot,
QEMU, and user-space tools. This definition was creating some confusion
when it came to installing the "ADT". Namely, some of the items you
don't even install, such as the user-space tools. So I recast the
definition of ADT to mean the cross-toolchain and sysroot. I cast the
other items as part of the overall development environment.
(From yocto-docs rev: 6ee891660d3b6bf6e2a3f4b5a872ade7a007ce02)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit is the initial text for the introduction chapter.
(From OE-Core rev: 7c0899aa6d712e373bd1a2df1fb52dcf3a87b2fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initial chapters were failing to make due to duplicate section
identifiers that were created when I copied in the original files.
I gave each of the five chapter files (adt-command.xml, adt-eclipse.xml,
adt-intro.xml, adt-package.xml, and adt-prepare.xml) unique identifier
tags.
(From OE-Core rev: d30460c835c51dcc9301bcd848ceda29ba9ceeb6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have added a new directory to documentation named adt-manual.
This directory holds a Figures folder, and the 9 files needed
for the ADT manual. The book consists of five chapters:
adt-intro, adt-prepare, adt-package, adt-eclipse, and adt-command.
There is also a adt-manual.xml file called by the Makefile.
There is also a style.css file. And finally, a adt-manual-customization.xsl
file to control numbering.
(From OE-Core rev: ac2c8848bbefcf7d24192573904baaef87c67382)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark