Fixes [YOCTO #9707]
* Replaced gummiboot with systemd-boot in the dev-manual
* Replaced the gummiboot class with a new systemd-boot class
* Replaced the appropriate gummiboot variables in the glossary
with new variables SYSTEMD_BOOT_CFG, SYSTEMD_BOOT_ENTRIES,
and SYSTEMD_BOOT_TIMEOUT.
(From yocto-docs rev: 778b620e65cc68531b3c41aeb8f27f2a07eb0d00)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10144]
In the "Viewing Variable Names" section, there is a list of
example configuration files. I added bitbake.conf to the list.
(From yocto-docs rev: 5a19d5c314881e223aaa567c8eb8f6ed4fbc01df)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10141]
Provided several fixes to address this situation:
* Renamed "Debugging Build Failures" to "Debugging Tools and
Techniques" as it fit better the subsections.
* Renamed "Viewing Dependencies" to "Viewing Dependencies
Between Recipes and Tasks" as it fit better the description.
* Added a new "Viewing Task Variable Dependencies" section
to describe how sigdata and siginfo stuff can be used.
* Replaced the contents of "4.3.4.1 Debugging" with a shorter
bit that now references into the new section on veiwing
task variable dependencies.
(From yocto-docs rev: 539d76366055bed74ccc926519e969324cac470d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10138]
Small fixes for the following variables:
* PKGV
* PV
* PE
* PR
(From yocto-docs rev: 4ffc6a2fed330cec320e744561df3aad2a349cf5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove documentation as swabber was removed from oe-core with
this commit: commit a7ddbea345
(From yocto-docs rev: f3c462b2c6aa20de53c77e5d93cf397ae36cb2bb)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous description was not accurate. Looking at the code,
SERIAL_CONSOLES_CHECK does not act like SERIAL_CONSOLES, as it
will not add consoles to enable but only check and disable
consoles defined by SERIAL_CONSOLES. Also, the previous patch
adds aliasing functionality that needed to be documented.
I (Scott Rifenbark) did a bit of word-smithing here from the
original patch.
(From yocto-docs rev: 55d07048e831f0dbc955b74e029fe26ed276675b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SYSLINUX_ROOT variable was renamed to ROOT_VM in krogoth.
(From yocto-docs rev: c4bbe8bc4967dd631b939f6806d65e2862df3424)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10131]
Fixed some small issues here and there. Also, provided a
second itemized item in the note box turning it into a
notes box.
(From yocto-docs rev: a736c3bb707e81eda7760c642084a5a7c4de2539)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10132]
My attempt to be complete on the filenames that have a "pid"
portion were not correct. I have removed them from the first
paragraph.
(From yocto-docs rev: 8261b93b39df9abc9f9d6ccb4c00dc11330ad516)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10135]
Some small problems were fixed:
* Added a cross-reference in the FILES glossary entry to the
PACKAGES variable. The two are tied and there was not a
reference to it.
* Removed a redundant "/" character in a pathname example in
the dev-manual.
* Removed a redundant "/" character in an example pathname
in the FILES glossary description.
(From yocto-docs rev: 11a397c232696deece7ac5c6dafcadb87d7a5775)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10132]
Provided a better description and removed a deprecated sentence
near the end.
(From yocto-docs rev: bbe588e19bb9ed58883ae7c770da551de659e982)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10131]
The section was renamed "Viewing Dependencies" for consistency.
The section was moved up to be the third item in the sub-section
list. The section was extensively re-written to provide more
clarity and options for the user to view dependencies.
(From yocto-docs rev: d521c3aabe6ded105cde6f7b3563c85340f759fd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10099]
Renamed the log file section to better describe what the user
is accomplishing.
Renamed and repositioned the variables section to better describe
and emphasize the task. Also fleshed out the variables section with
more information.
(From yocto-docs rev: 0606fe481416a07bf98fc8ae79a30c1d62e75e6d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10094]
For PROVIDES, I added information about how the do_package
task goes through PACKAGES and uses the FILES variable
corresponding to each package to assign files to the package.
For FILES, I added a blurb to the existing note how you can
find default values for the FILES* variables.
(From yocto-docs rev: c70f79a608076c5c0490918b87986554bc5d8353)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided a better, more accurate description of this variable.
(From yocto-docs rev: 020f927bc01d662601fb44b19e4c6bc70e5e5ee7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10070]
Updated these three variables with various items to make clear
that PARALLEL_MAKE and PARALLEL_MAKEINST won't work unless
EXTRA_OEMAKE is passed to "make".
(From yocto-docs rev: 4f8b56cc67502cd672e0296cf2f143ecbcde22ac)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10069]
Added a note at the end of the variable description to
explain how runtime virual dependencies work.
(From yocto-docs rev: de1d16017c27b6b2502735fc41acd22660f6e7b9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10060]
I provided a new section in the Technical Details chapter. Also
some extra explanation was added to both the do_install task and to
the D variable.
(From yocto-docs rev: 565fb11d72bf8c585469bcf65f92b6738e344813)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10002]
Created new base description for EXTRANATIVEPATH.
(From yocto-docs rev: aafc2de2657203440fe4b0bf3895cf367063bed1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10012]
There was a mistake referring to the wrong example recipe. I
changed "core-image-sato-initramfs.bb" to
"core-image-minimal-initramfs.bb" for the fix.
(From yocto-docs rev: 4d63e1fc5786556dd0dd5ca1435252d43dbd745a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10013]
I enhanced the description with more detail all around.
(From yocto-docs rev: 319dabecf5abf0884295b991f681bed0e1dbf673)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9964]
There was a small fix to change oe_runmake task to oe_runmake
function.
(From yocto-docs rev: aa049c9165c67e041c84fab9fabfbe98828c79bb)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10012]
Added a new paragraph to the end explaining the default behavior.
(From yocto-docs rev: 1591f96fc04f64906145f272d205ec6c44ac70c0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10012]
Updated the description completely. New more detailed information.
(From yocto-docs rev: cb6ce91674ab092324f97ca4e56a0cbcd9140fbe)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more information about virtual targets to the end of the
description.
Fixes [YOCTO #10011]
(From yocto-docs rev: ce7ae0c6ad4ad3a0c2422b797556563dc48a9a5b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9988]
Added a link to the MULTIMACH_HOST_SYS variable from the
STAGING_DIR_HOST variable where it is referenced.
(From yocto-docs rev: 0f72b58a7bc1271245d139726f1145d5d99acee4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9988]
Updated the STAGING_DIR_TARGET variable with a better introductory
sentence.
Updated the MULTIMACH_TARGET_SYS variable with a more expanded
explanation.
Added a new glossary entry for the MULTIMACH_HOST_SYS variable.
(From yocto-docs rev: d17873d695772b62325de35dd0e5b9ccc7f12f1a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9989]
Added a link to the WORKDIR term in the D glossary description
example.
Also, moved the do_checkpkg task from the section of showing
normal recipe build tasks to the the section for manually
called tasks.
(From yocto-docs rev: 548e2fdfeae9d67bbad73ee3ab69a64a9a6ce9ff)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 95b740d719a7a6ffe3a06a1f152af4d877ee08c7.
I inadvertantly put this variable description in before they had
settled on it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed an errant comma and rewrote the final area of the section.
Fixes [YOCTO #9976]
(From yocto-docs rev: 19924dee2ebec3ff2a53152ecb8f79172eb43060)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleared up the last third of the description with better structure
and wording.
Fixes [YOCTO #9970]
(From yocto-docs rev: a2dbea4f3bbdddd72c86a5ade86ac822cd9bfecd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a new suggest section to the existing "Debugging Build
Failures" section. This section describes how to check for
build-time dependencies.
Fixes [YOCTO #9976]
(From yocto-docs rev: 54cd7161593ba35b63a26ade312cc4aee17e3515)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9968]
Made a link for the STAGING_DIR_HOST variable for consistency.
(From yocto-docs rev: eeb163ead40752d69f2f6c19e859e82109ef967d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the example statement line to match the actual assignment.
(From yocto-docs rev: 45e9274fcca0a285bda38cad8a6fe5e7bb05bd80)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9970]
Added more detail to the do_deploy task.
(From yocto-docs rev: 1b2daf814011dbc3c5987313442e95e18e83e180)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided more detail in the first sentence.
Fixes [YOCTO #9968]
(From yocto-docs rev: 15080a565bafdfffe0c13a0a18fd1c011773cc25)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9967]
Added more detail to this task description.
(From yocto-docs rev: 8cb154493a6b4ee541826f898b823a4dc2795f88)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9966]
Added quite a bit of detail to this task's description.
(From yocto-docs rev: c29d86813b9cb9bc1c9c02aeffb5cfd99fc5a542)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more detail for this task.
Fixes [YOCTO #9965]
(From yocto-docs rev: e50207488b8262bb46e58c4b9f40e487c15abc67)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9964]
Added more detailed information to the do_compile task. Also, provided
some information about oe_runmake in the base.bbclass refrence.
Finally, put some detail in the "Shared State" section concerning
do_deploy[dirs].
(From yocto-docs rev: 5d0612a57cc8e035a2194ada21e65055ef2b8a2e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9963]
I created a new cautionary note to warn the user to use the correct
operator "+=" rather than "=" so that they do not destroy $PN.
(From yocto-docs rev: e6861ffe9400b1ee48cc46ccfc6e8d65efbbec8c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9950]
I Provided a suggested introductory sentence and a better link to
the logging.class file, which is near the end.
(From yocto-docs rev: 6f296266b35f17792510d6a01f5640ba30818a22)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9950]
Added more detail on the functions for logging.
(From yocto-docs rev: b7ed4d84ae5221765201fe661af3741fb01da738)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the note with some formatting and grammar changes.
Fixes [YOCTO #9933]
(From yocto-docs rev: afef28ae894c313f85ddbaeef8b0abbc2700ba2c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9909]
Added some technical clarifications to the existing note to be clear
about what is causing the limitations in this case. Applied some
formatting fixed to for the use of the include word.
(From yocto-docs rev: cbbd960d8665d9fb6b92698c14728d1c0bcc659f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9933]
Added two notes to help clarify how DEPENDS works with pre-compiled
objects. There are some details that trip people up.
(From yocto-docs rev: 06917e97adf24816b0aee6fdfdd14aa79d4c6ab2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9909]
Added a note that talks about how the BBCLASSEXTEND mechanism
adds recipe variants.
(From yocto-docs rev: a05990ecb760519a685a1c5ddcf2ce3e048bfbf2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9861]
Placed some section links into the "Tasks" and the "Dependencies"
sections of the BB manual from several areas:
* The "Normal Recipe Build Tasks" section
* The variable description for DEPENDS
* The variable description for RDEPENDS
(From yocto-docs rev: d96347fdb4c3d5a34695f20e995f165c5ba91c32)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9251]
I added a new section on the task variants for setscene, which uses
the shared state cache. The section describes the BitBake processing
that helps the build system to not have to build everything from scratch.
(From yocto-docs rev: 6aa0e6b837de14dd7d6c5ef34328bbf268dd6d71)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9843]
Some minor rewordings and removal of a stray comma.
(From yocto-docs rev: 0b0c8b0b1c4edb86eb2b20c73ffb83d640f6b916)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9380]
Updated the shlibdeps description for this variable to try and
satisfy automatically added version restrictions.
(From yocto-docs rev: d94de0b24591206620c83a9022a9d813141a7637)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9843]
The variable description was very brief. These changes added some
substance to the description and how the OpenEmbedded build system
uses the variable.
(From yocto-docs rev: cc9117d4e16c56dd54f81804fda94561e61d91a7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 9823]
I added more details to the explanations of how shared state is
implemented. Included a bulleted list of the various statements
of code to help explain flags and settings.
(From yocto-docs rev: 518352f88c8dda16f2915a7bb9901ffd7686d739)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to explain that by default, DISTRO_FEATURES backfills
bluetooth support with Bluez5. If the user wants to use the
Bluez4 feature, they need to backfill consider Bluez5.
(From yocto-docs rev: 4e8b34c8c5841cdc1cae564decae4689ae4f2b11)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9773]
Updated two examples that set SSTATE_MIRRORS so that they match the
changes made by YOCTO #3220.
(From yocto-docs rev: e07674cd0665c485173eaa05c4072c287411b81f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied some grammar edits and re-wordings as directed by
technical reviews.
Fixes [YOCTO #9671]
(From yocto-docs rev: b5a5d3d3b311cb83ed61bfd247fbf802027fe5c4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9671]
Applied some review comments to these three variables.
Edits to be sure to qualify that the variables only to recipes
who inherit the distrodata class.
(From yocto-docs rev: 1b094b0567fa75d1c77da7ec04641d034f29272d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9671]
Put in descriptions for the following variables:
* UPSTREAM_CHECK_GITTAGREGEX_pn
* UPSTREAM_CHECK_URI_pn
* UPSTREAM_CHECK_URI_pn
(From yocto-docs rev: e00470cbf98714236f3197dd538371488d8f03fb)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The string was a copy paste error. It was using the string
for INHIBIT_PACKAGE_STRIP.
(From yocto-docs rev: d2efc36a7bc39b3fb596286dcde5efa1b8fead7c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Updated poky.ent to have the appropriate 2.2 variables
* Updated all manual revision tables to have a new entry for
2.2 - used "Sometime in 2016" for the date.
* Updated the mega-manual.sed file to process internal links
for 2.2.
(From yocto-docs rev: 2acd49ee197e3e3e725f4cb8cc432437afd8646b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lists packages removed if package-management was not in
IMAGE_FEATURES.
(From yocto-docs rev: 45768d661b800782e32b76b4fa7efa0f70cb7e47)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Referring to multiple options that function the same as
two separate options. I had two successive sentences that were
inconsistent.
(From yocto-docs rev: 291fa846dba2bfcffae9d0538eba65df71c1092b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
Several occurrences of tools-profile and the like had to be dealt
with.
(From yocto-docs rev: 62f45579970f47d22dabe921a51c663059a04576)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These classes have been removed. The bootimg class was sucked
into the image-live class. I removed the reference sections to
both classes and fixed the references throughout the manual set
as needed.
(From yocto-docs rev: 649d56b54987580039cbd52f54642112f810ffad)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dropped the "experimental" verbiage and added real detail.
(From yocto-docs rev: ca63ab4bac2885037741afdc78ee307233159a2e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Occurrences in many manuals and one figure.
(From yocto-docs rev: 26d30cd162083c62216fb4ab526d0b231f453de1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This minimum Git requirement is now version 1.8.3.1.
(From yocto-docs rev: c68aa31442f7ac58a6f597f3074416afaab95882)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided information about the new default "".
(From yocto-docs rev: 75ab9805614fc9501191eef0000c7a9214765392)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated to "April 2016" for all manuals that use this table.
(From yocto-docs rev: 4d3753cc92c446668b0c383736c2071e24e53dd2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
I handled the occurrences of "oprofile" and "tools-profile" throughout
as I could. They are not all done yet. These in this commit have
been removed.
(From yocto-docs rev: d76e264ea210846ad8080134bacd56462ba69d24)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8595]
Applied some wording changes as part of the review process from
Richard Purdie.
(From yocto-docs rev: 3c4fc3cbdecb7e3c8287a915b82bc5469288d5db)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9313]
Update the DL_DIR variable description to add a cross-reference
to the wiki page that talks about working behind a firewall.
Updated the 14.12 FAQ entry with new information about working
behind the firewall.
(From yocto-docs rev: 056e6881951023e62a7363ba60fe73cd6d2932b6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8595]
Added some examples on how to force the version.
(From yocto-docs rev: 4a98ce1ed623cd9763731453316f2ff8d8b8b82a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9336]
I updated the "Debugging" section within the "Tips and Tricks"
section. The list of items did not provide detail on two
BitBake command-line options you could use to dump out
signature data into .sigdata files. Also, the .sigdata files
were incorrectly referred to as .siginfo files.
(From yocto-docs rev: 7836c386f4f7c011de710b6ec9f6be13045dc559)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7894]
I created two new task reference sections: distrodata and
checkpkg. Also, updated the distrodata class description to
reflect the presence of these new tasks.
(From yocto-docs rev: 3896cbf640d296dafb5eda37f89bba31a47ca8a5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The term "meta-toolchain" is legacy now. I went through and removed
its use except for where it appears still as output from the
oe-init-build-env script.
(From yocto-docs rev: 1cc134060459278997d57f1293f54091c5404d85)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the heading for "Optionally Building a Toolchain
Installer" to "Building an SDK Installer". This changes the
heading and many references to that heading.
(From yocto-docs rev: 97d8cd34d0dd0993b1b1135bb75f2212bb46878a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob and the packageinfo class have now been removed from the
code base. This patch removes all references to:
* Hob
* meta-hob
* packageinfo and
* BBLAYERS_NON_REMOVABLE
from the documentation.
So long, Hob, and thanks for all the fish.
(From yocto-docs rev: 6a1ba2761d5c2ec1072616ce3d791787f1b1b2a7)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments to the section.
(From yocto-docs rev: 83871d0f6cd996be2d3476bdfc0f2adef9ff52a7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the note to have a bit better wording regarding
extensible SDK specifics. These changes were in response to
a review of the section.
(From yocto-docs rev: 0209292cafbbe4918ec7ecdf1f48fc8ef2703b9b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review edits to adjust this section for the
extensible SDK stuff.
(From yocto-docs rev: d386fca0b4e54ae2d5e610b37089fb058d80a746)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the figure for this section to include some stuff
for the extensible SDK. I updated the text supporting the
figure to cover the different SDKs and the different SDK
variable sets.
(From yocto-docs rev: 5aafab3e2e841293ddba45dfd8683cbdc223ed7c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the figure used to show SDK generation. I added a block
to cover the extensible SDK stuff. This affected the figures
folder in both the ref-manual and the mega-manual.
Updated the text section to support the new figure.
(From yocto-docs rev: b9fd7c2b0ea0e2fe1805a1bb1eb1bcb82c807b66)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the text to a link to the populate_sdk_* class.
The link was good but the text was old.
(From yocto-docs rev: dc892cdf618c008a9ce615c31ef643987dfcca13)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note about the extensible SDK not including gcc-canadian-cross.
(From yocto-docs rev: 53866854af53e97c9d8ca8d0771e12a7744ad6bd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some new files to the list of files highlighted for this
directory with "sdk".
(From yocto-docs rev: 213371bc5c5eb00d37ace5f2b330a87e1f10b73e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8620]
Added a couple more clarifications for some nativesdk term
uses. Minor edits to help make things clearer.
(From yocto-docs rev: 38082e1120861332674f97f67966b1f5cec7dc03)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8620]
I applied some review comments for the changes made to several
areas in both these manuals. Minor wording fixes and the
dropping of some changes as directed by Joshua Lock.
(From yocto-docs rev: 71af89da612c37162ba27844c297879d643caf65)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8620]
I went through and made some judgement calls on the use of
"native" and "sdknative". I tried to make sure that the reader
understood the real meaning of these terms.
(From yocto-docs rev: d711e8c6dfb32a4ad79e9d11dbf44fbc759d0245)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8542]
I updated the description with a new example specific to Git.
When you use Git, you have to specifically set the S directory
for things to work.
(From yocto-docs rev: 10d71ccda461098fd8c94677d91fd261f6edf508)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8634]
To clear up the behavior the COPY_LIC_DIRS, COPY_LIC_MANIFEST,
and LICENSE_CREATE_PACKAGE variable behaviors, I updated the
glossary descriptions of the variables. Also, added more info
to the "Providing License Text" section in the dev-manual. Tied
everything together with good referencing.
(From yocto-docs rev: e7b2a1ed29dcd9d572b71f756e7705e6499a05ac)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I included a new paragraph at the end of the section describing
configuration in the "Closer Look" chapter. Cases exist when
two configuration files set the same variable. Depending on the
order, the last configuration file parsed is the one that actually
sets the variable.
Fixes [YOCTO #8914]
(From yocto-docs rev: 260e7dea7879846bcd3f3475cef001e512c657f0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8542]
I did a bit of re-wording based on the suggested stuff in the
bug.
(From yocto-docs rev: 8ab2ae205f79429c2986a9ba86bcba07f5e05cd8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found the word "Ebedded". Fixed to "Embedded".
(From yocto-docs rev: 65815012cd70b52b7558e6402f0eec946eb3d445)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8637]
Added an example to the section for https_proxy.
Also added a small example section for SOCKS proxy.
Reported-by: Liam R. Howlett <liam.howlett@windriver.com>
(From yocto-docs rev: e17510f1209660b934e27f52a3e5c01a1f213453)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6398]
Fixed the text according to Ross such that the specified
package contains files in /usr/libexec when the distro
configuration uses a different path for <libexecdir>.
By default libexecdir is $prefix/libexec but this can
be changed, for example to ${libdir}.
(From yocto-docs rev: 6ffe6728994c615abe2689a63f9f055425d08d7e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8633]
Added a new variable description for LICENSE_CREATE_PACKAGE.
(From yocto-docs rev: 49a2f8384e67a90d5b3227ab0de3d12eb311bd20)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added this new class to the ref-manual classes section.
(From yocto-docs rev: aedb3f54c5874e9cd9d8e5592959410db6f02ec7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_deploy[sstate-name] = "deploy" statement in the "Shared
State" section was obsolete. I removed it.
Fixes [YOCTO #8995]
(From yocto-docs rev: e1836a405fcc89cd964e2e71597091161c53224b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the SDKPATH variable to figure. It was missing.
Also, had to adjust the display parameters to get it to
display decently.
(From yocto-docs rev: 4862288ab4675051ec6fc93927839da7eb3634b6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rewrite of devtool reference section. This was a separate commit
but got squashed wrong so it ended up with this commit.
The changes to "Image Generation" section reflect the new, more
detailed image generation figure
(From yocto-docs rev: 827c6872b88c17d2d0c8d44b1024fff19076e505)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old version was off schematically. Moved some boxes around
and created more detail to reflect technical correctness.
(From yocto-docs rev: 7793101e6866c0c58d0f1202fb04769a21f2f882)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8941]
Confusing wording existed surrounding how the auto.conf file
needs to be created. Early in the section indicates that you
must hand create the file. Then later, it indicates to not
hand-create it. In reality, this file is not auto-created by
any script but is really usually created by an autobuilder.
I updated the verbiage to better explain this.
(From yocto-docs rev: 2dd8f60251009038d6bc61e2257876baebe8e0be)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several areas changed throughout the ref-manual to remove qt4
referencing.
(From yocto-docs rev: 9ee721034ceb2bb7b7a9e64f6a6a7a2b3bfd1c82)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list in the IMAGE_TYPES variable description has been
updated to add and remove several image types.
(From yocto-docs rev: d363d4d2dcf1760c5a392b443b52965ca7177984)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes are for the poky.ent file and the mega-manual.sed
file to take care of variables. Also, entries added for the
manual revision table.
(From yocto-docs rev: 60da39f85165e2d4aef55d456f8203183e089433)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8696]
Turns out the 'dnf' command is not yet supported for CentOS
as it is for Fedora, I changed the 'dnf' command back to
'yum'. Also, there were some essential packages that needed
to be added to CentOS. Finally, there was a slight
inconsistency in the Fedora list of essential packages and the
ones for supporting Graphics. I had a redundant listing of
one of the packages. I took that out of the Graphics area and
left it only in the essentials area.
(From yocto-docs rev: dde72542ca87bfdd82d713f90938a41c83ac8a4d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added another link to Josh's porting guide.
(From yocto-docs rev: a1860811628aeddd579f92844f3e6bfcbded2936)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added an exception and link to a patch the user should use if they
are using GCC 5 for specific ARM machine.
(From yocto-docs rev: 4f43b683cf4a078c6df4b8c6be59e6fb8702d265)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor rewordings
(From yocto-docs rev: c62d39ad684c6be3321d711bd7935799e4269fa3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton.
(From yocto-docs rev: 5b41ef810fdae04a722253676edd9d5803cb50f4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8298]
Added "rootfsdebugfile" class to the list of classes in this
general class description.
(From yocto-docs rev: ad2f6e1d22c9453b0d28cdc0b53558efa1dcc212)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a patch to include a note from Andre.
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS won't always grab your
out-of-tree module recipe since the kernel recipe's
PACKAGES_DYNAMIC variable provides kernel-module-*. This
patch documents that your out-of-tree module needs to explicitly
set its PACKAGES variable to avoid this behavior.
(From yocto-docs rev: 2c51eae23b634cdace5a119ee1a6c8e8ba76dc45)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was refering to the class as "pkg-config". This was incorrect.
I fixed it in the opening sentence to use "pkgconfig".
(From yocto-docs rev: c8400b362704093d4c2c891f521c11818eb506a8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In Section 5.5.3.2 bb.fetch.encodeurl: Use bb.fetch.encodeurl
changed to
bb.encodeurl: Use bb.fetch.encodeurl
Reported-by: Olivier Dugas <dugaso@sonatest.com>
(From yocto-docs rev: bec0f98f2383b231a1d453932a14b07038febd36)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8298]
Updated several classes with feedback from Jose Lamego of Intel.
The feedback fixed some class groupings so that previously isolated
classes could be bundled under common classes (e.g.
autotools*.bbclass).
I scrubbed the cross-references for cases where a particular
class became "undocumented." The cross-references now point to
the bundled class entry in the ref-manual.
(From yocto-docs rev: 07a533cb41ad26d202f4e303f2dbc7d7bf26e076)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCOT #8301]
Added descriptions for PACKAGE_FEED_ARCHS,
PACKAGE_FEED_BASE_PATHS, and PACKAGE_FEED_URIS variables.
The build system uses these three variables to construct a
set of final package feed URIs.
(From yocto-docs rev: 53447af460932caa5b2b7637894657eb9fd2e84d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8439]
The "image-swab" class depends on "strace" package being on
the build host. I added that fact to the note where we say
the class is not maintained.
(From yocto-docs rev: 503f4199b3c0bcfcd333dbab025b40f9508a6820)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the SRC_URI variable description to cross-reference
the "Fetchers" section in the BitBake User Manual and added
some more Fetcher URL parameters specific to certain fetchers.
This was done to help clarify how to put fetched code into
specific directories.
Also updated the bin_packages.bbclass description to have a
better example. Used a git:// fetcher example and provided
some specific URL parameters.
(From yocto-docs rev: 7133b49092096c253ffce99f39d4fa6db7810061)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These updates included editing the poky.ent file so that
DISTRO and related variables are now 2.0. Also updated all
the title pages to have the manual revision table correct.
Finally, used my email for the manuals.
(From yocto-docs rev: deae61bfbb528ea0ced82399a78260a7f34a7a11)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8019]
Added new descriptions for five kernel variables and two tasks.
(From yocto-docs rev: 834aebb75dce1c905b1e0f142d0d7de6bb44e7d4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running oe-selftest requires some Python packages for all
the supported distros. I added new sections in there to cover
these requirements.
Fixes [YOCTO #8290]
(From yocto-docs rev: a8654267405df9ffb2f4d59d3de4a7eb3653893e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8066]
Applied some review comments to the variable's description.
(From yocto-docs rev: 35b28f3b86cdb76ae3dc431b5f538b4d078b694f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8066]
Applied some review edits to the variable's description in the
glossary. Also, changed the name of the variable to be correct.
(From yocto-docs rev: f3ab503301db9d22cb85da0f7518d266f230bd3d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8237]
The use of this class no longer requires including the laundry
list of files that was provided in the section. It just needs
the INHERIT statement now. Removed the include statements.
(From yocto-docs rev: c31a5a3a78d265dea68c1c72c4eea6c2f80c839a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7906]
I added a new description for the variable.
(From yocto-docs rev: 2a99b80abeee05a11aba9ab339d989a7d616b597)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8066]
Added a new description to the variable glossary.
(From yocto-docs rev: ccb23c5a318f1640718ed41dc7ea2fd1bb8a43a1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8067]
Added a new file description.
(From yocto-docs rev: 9c60c6157660be6557732bbdc2398e2783ac68d2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8159]
Fedora and CentOS have deprecated "yum" and have come up with
"dnf" as the package manager. This happened at the end of
2014. I have replaced the occurrences in the manual
appropritely.
(From yocto-docs rev: 14c80ecc8d6a4f9bf355dd84657d339782da83f0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8233]
The IMAGE_POSTPROCESS_COMMAND and IMAGE_PREPROCESS_COMMAND
variables were missing a linked cross-reference to the
IMAGE_ROOTFS variable. I added the linked references.
(From yocto-docs rev: a36b447ca105b3d63b7cfd085c77b071275e0dab)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new description.
(From yocto-docs rev: e17fe8da8a9d2cbca54dd45451b35103d7d89fa0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a complete re-write of the YP Quick Start in an attempt
to streamline it, remove unecessary detail, and make it flow better
with the examples. In doing so, many manuals were affected due to
section headings being renamed, information being moved, etc. Here
is a list of the changes by manual:
Makefile - Removed two figures from TARFILE list for the
yocto-project-qs.
Added building-an-image.png to the ref-manual TARFILE list.
Added using-a-pre-build-image.png to the adt-manual TARFILE
list.
Repositioned 'eclipse' in the adt-manual TARFILE list.
adt-manual: Fixed a cross-reference so that it goes to the new
'Building Images' section that is within the YP QS.
Added new section 'Example Using Pre-Build Binaries and
QEMU' to hold the information that was formerly in YP QS.
dev-manual: Removed a cross-reference into the YP QS that promised how
to configure the most efficent build.
Changed a cross-reference into the YP QS from 'The Packages'
to 'The Build System Packages'.
Changed a cross-reference into the YP QS from 'Building an
Image' to 'Building Images'.
Changed a text reference from the YP QS to the adt-manual.
Moved the bit about getting YP files by using the YP website
from the YP QS to the dev-manual.
Changed a cross-reference into the YP QS from 'Using Pre-Built
Binaries and QEMU' to 'Example Using Pre-built Binaries and
QEMU', which was moved to the adt-manual.
ref-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto Project'.
Moved the note about if your system has oss4-dev in the
packages area in the YP QS to the appropriate area in the
ref-manual.
Moved the introduction information regarding building an image
along with the figure from YP QS to the ref-manual's section on
building images.
toaster-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto
Project'.
yocto-project-qs: Complete rewrite that changed many section headings and
removed much detail, which was placed in other manuals.
(From yocto-docs rev: da4ed8147b04963a700caa784bda709c57b4eb6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed wording in section 7.78 to use "nativesdk-myrecipe.bb".
Fixed message to say "non-dev/-dbg/nativesdk- package contains symlink..."
Reported-by: Rene Fichter <rene@fichter.se>
(From yocto-docs rev: 80a5b51a0416dc610edf1526079102fee661375b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7755]
Applied some review edits to the wording from Ross Burton.
(From yocto-docs rev: 4cb0d0f463cb6c9b103d01b7c5e800e7b1a04a3e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information to note when it is used (insane.bbclass) and only
if the recipe inherits the autotools.bbclass.
Fixes [YOCTO #7755]
(From yocto-docs rev: eeb3006e0a440464af89e336b9eff0ea60702601)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information in about the various varflags the user can
use to define the type of archive.
(From yocto-docs rev: 9035c415d4453750f016fe4ea2fa8179549330ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The customization layers were pointing to Sourceforge site for the
XSl files needed to build the manuals. Throuhgout time, this site
has failed me enough to warrent trying to get these XSL files from
some other source. Rather than ship the XSL files with the YP release,
we decided to create some mirrors and point the customization files
there.
(From yocto-docs rev: 4fd1703870694dff1f593b421f90aad0803d9e65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7474]
There was a TBD section here that needed filling out.
(From yocto-docs rev: 84efce1622dec2782aadfb9cc9338c3f7aab1472)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable has been deprecated a while and Paul Eggleton suggested
we finally remove it from the glossary. I removed it and also
took away the two links from where the variable was referenced
in a couple spots in the migration section.
(From yocto-docs rev: 2b3c762428bd9ca64087ba6359c4eb5fb5a3db84)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7755]
Added a new description for this variable. Based it on information
given to me by Paul Eggleton.
(From yocto-docs rev: eb0101027ed18b6bae2d80166b73b41ee1ebeb9f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added better wording to show that you use spaces to separate
multiple features.
(From yocto-docs rev: b21d73acb23e0e3b78cff332fdc4a09166eb7392)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #7632]
Looked for, updated, and added (if necessary) the following
variables:
* ROOTFS_PREPROCESS_COMMAND
* ROOTFS_POSTPROCESS_COMMAND
* SDK_POSTPROCESS_COMMAND
* POPULATE_SDK_POST_TARGET_COMMAND
* POPULATE_SDK_POST_HOST_COMMAND,
* IMAGE_POSTPROCESS_COMMAND
* IMAGE_PREPROCESS_COMMAND
* ROOTFS_POSTUNINSTALL_COMMAND
* ROOTFS_POSTINSTALL_COMMAND
Each of these variables no longer accepts arbitrary shell commands but
rather functions. The wordings now support that behavior.
Also, updated the migration section for going to 1.6 release to note
this change.
(From yocto-docs rev: e1ab48f7def9d1eb080e007b88f75172470b8007)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied a little more information to this section to help
round out the variable explanations. Part of the change involved
adding PARALLEL_MAKEINST to the list of scaled variables.
I had left that variable off. Also added a new trade-off.
(From yocto-docs rev: 3d85d5385c03841c17dd33afb94c110edc12170f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated both the PARALLEL_MAKE and PARALLEL_MAKEINST variables
by expanding the note to indicate how to prohibit parallel make
threads. Also, added a cross-referencing link to the
"Debugging Parallel Make Races" section.
I added a short note to the start of the "Debugging Parallel Make
Races" section noting that if they can't properly fix the condition,
they can always do a work-around to set the PARALLEL_MAKE or
PARALLEL_MAKEINST variables to null.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f8dccf3f115647cb039d91415819186cf38fa8bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added some more detail to these two variables. The system sets
them according to the perceived number of cores. These default
setting are cool for single socket systems. However, if you
have some big system with a lot of physical CPUs, you might want
to cap off the values at 20. This is according to Darren Hart.
I also put in some cross-references to the "Speeding Up the Build"
section.
(From yocto-docs rev: 20eafc8290f46d8deea84dd6ff721b65cb8a1463)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>