We don't need a dependency on this variable changing, and having one
causes locked signature warnings during eSDK installation if you have
INITRAMFS_IMAGE_* set (since TOPDIR will always be different between
the eSDK and the environment in which it was built).
Relates to [YOCTO #12102].
(From OE-Core master rev: 073610af04be326f9245ca91714526b390fb72cd)
(From OE-Core rev: 94a9f9a7dc5a736b7986b889895c736f02110715)
(From OE-Core rev: 8bf158857d7c597c58efc4023bdd9c2785d43ad3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This saves relative paths in the qemuboot.conf file instead of absolute
paths. This is to allow the images and kernels to be relocated and still
have the testimage and runqemu work.
[YOCTO #11375]
(From OE-Core rev: 235243d7be5df57df4767e4710b846e83f0aa9fd)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Native sysroot of qemu-helper contains all required tools
(qemu-system and tunctl atm) for runqemu to work. It's not
removed by rm_dir and should always exist. It makes sense
to write it into qemuboot.conf to make runqemu to use it
as a default directory for native tools.
This should also speed up runqemu as it doesn't need to run
to run 'bitbake qemu-helper -e' to get its native sysroot.
[YOCTO #11266]
[YOCTO #11193]
(From OE-Core rev: 0f207bfc1f7a4fd509b78d32bbe1a8d4ebea8053)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed when the image is large and not enough memory:
grep: memory exhausted
Aborted
[YOCTO #11073]
(From OE-Core rev: a99deb30a0138594147ae28aab016fe4b74b8959)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add blank lines in comments to make it easy for readind and updating.
(From OE-Core rev: 3f3344d1c063b0013a9ae7203bac30ab8f4ea17c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
- Add QB_NETWORK_DEVICE to set network device, it will be used by both
slirp and tap.
- Set QB_NETWORK_DEVICE to "-device virtio-net-pci" in qemuboot.bbclass
but runqemu will default to "-device e1000" when QB_NETWORK_DEVICE is
not set, this is because oe-core's qemu targets support
virtio-net-pci, but the one outside of oe-core may not,
"-device e1000" is more common.
- Set hostfwd by default: 2222 -> 22, 2323 -> 23, and it will choose a
usable port when the one like 222 is being used. This can avoid
conflicts when multilib slirp qemus are running. We can forward more
ports by default if needed, and bsp.conf can custom it.
- Use different mac sections for slirp and tap to fix conflicts when
running both of them on the same host.
[YOCTO #7887]
CC: Nathan Rossi <nathan@nathanrossi.com>
CC: Randy Witt <randy.e.witt@linux.intel.com>
(From OE-Core rev: 7dddd090806914a62d977730440d803e48f44763)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So that "bitbake <image> -ccleansstate" can remove qemuboot.conf
(From OE-Core rev: 0704f15d1ad7483f80ffa18fa32b6115923641cf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
(From OE-Core rev: 7c552996597faaee2fbee185b250c0ee30ea3b5f)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Writing qemuboot.conf in write_qemuboot_conf() does not modify the
rootfs and thus conceptually shouldn't be executed as part of rootfs
creation.
Running it as separate task is cleaner and fixes the problem of
missing qemuboot.conf files for meta-swupd virtual images; those
images replace do_rootfs and ROOTFS_POSTPROCESS_COMMANDs don't run at
all.
The task gets added such that it runs roughly at the same time as
before. Probably it doesn't actually need to depend on do_rootfs, but
this way we don't write a useless qemuboot.conf in cases where
do_rootfs fails.
(From OE-Core rev: c8260447ed115bc5be7df9b25e449a7744d9f2df)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting up the vardeps on write_qemuboot_conf forces the updating of
variables in qemuboot.conf when machine/deploy configuration changes.
This is particularly useful when developing or setting up the qemuboot
(e.g. changing QB_* variables) for new targets or when changing
deployment variables (e.g. KERNEL_IMAGETYPE).
(From OE-Core rev: c568f6ce06512a108cada5c7100eb1f6de73f2ff)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the move to put image deployment under sstate control in
d54339d4b1a7e884de636f6325ca60409ebd95ff old images are automatically
removed before a new image is deployed (the default behaviour of the
sstate logic).
RM_OLD_IMAGE is therefore no longer required to provide this
behaviour, remove the variable and its users.
(From OE-Core rev: 93631befe8b962bf99524746b49f4ebca336175c)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* in some cases we might set QB_DEFAULT_KERNEL to the real filename
instead of symlink and then this whole readlink work around actually
breaks the build, because os.readlink fails on normal files:
>>> os.readlink('deploy/images/qemux86/bzImage-linux-yocto-qemux86-master-20160927084848.bin')
'bzImage-linux-yocto-qemux86.bin'
>>> os.readlink('deploy/images/qemux86/bzImage-linux-yocto-qemux86.bin')
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
OSError: [Errno 22] Invalid argument: '/jenkins/mjansa/build-starfish-master-mcf/BUILD/deploy/images/qemux86/bzImage-linux-yocto-qemux86.bin'
(From OE-Core rev: a11d0d8641b7dfb05c78645cf21f2c04a08c4822)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the very first build, the DEPLOY_DIR_IMAGE
directory might not have been created yet, causing
the creation of the qemuboot.conf config file to
fail.
This is because write_qemuboot_conf() runs at
rootfs creation time, i.e. before deploy.
So let's create the directory if necessary before
trying to write the config file.
(From OE-Core rev: ee4697350a553a36ca17b9376911e56eee43a465)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow runqemu to fall back to trying the link name when
a file matching the full name can't be found.
(From OE-Core rev: 3ccbaaad75f0a53d8bcf6a5c748ec80c96a383bd)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
KERNEL_IMAGETYPE gives the filename of a symlink to the kernel,
which may not be available i.e. if the user downloads some build
artefacts to run on a local machine. It's also possible that the
link will point to a newer kernel than was intended for use with
the rootfs in the qemuboot.conf.
It's much more reliable to read the name of the file
KERNEL_IMAGETYPE is linking to and assign the full filename to
QB_DEFAULT_KERNEL.
[YOCTO #10285]
(From OE-Core rev: d57bdacab13605ada4cd9e9159c18fdcd6eeacbc)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It saves vars in ${DEPLOY_DIR_IMAGE}/<image>.qemuboot.conf, and runqemu
will read it.
The bsp which can be boot by runqemu will inherit it.
(From OE-Core rev: 1675e9b89e00b875d0da13411a2a939aa4ba5298)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
brian avery
Ed Bartosh
Robert Yang
Joshua Lock
Patrick Ohly
Nathan Rossi
Martin Jansa
André Draszik