With the renaming of the cross packages, its no longer possible to use
endswith("-cross") and similar to detect cross packages. Replace these
references with other techniques.
This resolves certain build from sstate failures which were due to the
system believing cross packages were target packages and therefore
dependency handling was altered.
(From OE-Core rev: 91edf4cac223298e50a4b8e59dd19f1b272e3418)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The scripts extact variable values from bitbake -e. Unfortunately
TARGET_ARCH is unset from that environment so we use TUNE_ARCH instead
which will have the value we need.
(From OE-Core rev: b77494025b3d47fd5130ae6c445ac84cabb1f91e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For use outside of tests themselves, we want a better error than
AssertionError, so create one and allow us to request it when calling
runCmd(). This enables us to avoid tracebacks during master image
operations if the power control command fails.
(From OE-Core rev: 89868383685091b0d3723fb8f29590f3f6610078)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we couldn't start the target, it doesn't make sense to try and stop
it here since logically it shouldn't now be in any kind of "started"
state. (It's the start function's job to clean up after itself if it
fails - to that end, fix up the QemuTarget class so that it does.)
(From OE-Core rev: 819ebddae6b78120e5e082423793ff988419b5c4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of powering up the target when the object is constructed, wait
until deploy is called. Then there are basically two different
scenarios:
a) The device is booted into the master image already, in which case
we can just use it
b) The device is booted into another image or can't be contacted, in
which case we need to power cycle it. Here we also now wait until it
has booted up instead of trying to contact it immediately.
(From OE-Core rev: c2257fa50071e4704a8152b5f1d16f899b4bed98)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similar to power control command, this depends on a user's setup to get to
the serial port of a board. For a local connected board this could just be:
TEST_SERIALCONTROL_CMD = "picocom /dev/ttyUSB0 -b 115200"
and for a serial console server: "telnet 10.11.12.13 7003" or some conmux
command.
(From OE-Core rev: 5131094ad8f53b2052a97efd505e7a170d0c915d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And drop the un-needed and un-used restart methods.
Only qemu ever used this and actually does it safely.
(From OE-Core rev: 1dd1edb5ea551c8a01538b130aa4d0c361eae14d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Right now GummibootTarget is the only hardware TEST_TARGET with deployment,
but we will add more, so let's make an abstract base class, that will
do the common thing for all the hw targets.
(From OE-Core rev: 1d70b1908e1dc5d612b0627022659639e3f384e5)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Log the output of the command as it runs not when it finished, else
tail -f tmp/work/minnow-poky-linux/core-image-sato/1.0-r0/testimage/ssh_target_log
isn't as useful as it could be.
(From OE-Core rev: be8f766f43d85c364b9706b464ed0a59d0fbf0b7)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BitBake has the exact same code as oe.utils.contains so there's no
reason to duplicate it. We now rely on the bb.utils.contains code for
metadata.
(From OE-Core rev: 93499ebc46547f5bf6dcecd5a786ead9f726de28)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xfce terminal was renamed 'Terminal' -> 'xfce4-teminal' mainline end of 2012,
so the distros supporting 'Terminal' will dissapear. The distros not
mentionied in __init__ do (e.g fedora 19 - tested) fail - or will fail
sooner or later.
(From OE-Core rev: d07f3812ec371da6f18fa1dd920cdde470bd89ad)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the free space of the host works when
oe-selftest is the only build running, but if something else
on the host remove things this will fail (as seen on AB).
Using an absurdly high value should fix this.
(From OE-Core rev: 413fc934fadbd3603b7f78dfd3cc0ac83bb0377f)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without "-P" df splits the output on multiple lines and breaks the test
(From OE-Core rev: 81a81807d34e4b2ea28d8ba9c29e5b48a14bbc1f)
Signed-off-by: Alexandru Palalau <alexandrux.palalau@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the sstate-cache-management script does not remove populate_lic
sstate files, we should ignore them when checking for removed files.
(From OE-Core rev: 5debc2af6672841c126cec5d747e2e3c6407c8be)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since commit a83144bac8d67704ff66f5dc0fc56f5b63979694 (2014-02-11), USE_DEVFS is not considered anymore.
For compatibility, let's restore USE_DEVFS semantic.
Also add USE_DEVFS to documentation.conf.
(From OE-Core rev: d12a5e38a02abe3feb3db8ae5ffd9a5005124294)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The purpose of this module is to deploy a test image on a EFI-enabled hardware
and run our runtime tests. A bit of background:
- testimage.bbclass uses the concept of TEST_TARGET which is a class name
that is responsible for target deploying. A layer can provide
it's own TEST_TARGET. Right now has OE-core has a QemuTarget and a SimpleRemoteTarget
(ssh into an already up and running machine and run tests), the default one being qemu.
- basically testimage does something like:
target.deploy()
try:
target.start()
runTests()
finally:
target.stop()
This module assumes a running EFI machine with gummiboot as bootloader and
core-image-testmaster installed (or similar). Also your hardware under test has
to be in a DHCP-enabled network that gives it the same IP for each reboot.
One time setup (master image):
- build core-image-testmaster with EFI_PROVIDER = "gummiboot"
- install the image on the target
Test image setup:
- build your test image, e.g core-image-sato as you usually do, but with these in local.conf:
IMAGE_FSTYPES += "tar.gz"
- Now run the tests:
INHERIT += "testimage"
TEST_TARGET = "GummibootTarget"
TEST_TARGET_IP = "192.168.2.3"
bitbake core-image-sato -c testimage
Other notes:
- TEST_POWERCONTROL_CMD (togheter with TEST_POWERCONTROL_EXTRA_ARGS) can be a command that runs on the host and does power cycling.
The test code passes one argument to that command: off, on or cycle (off then on). In my case I use something like
TEST_POWERCONTROL_CMD="powercontrol.exp test 10.11.12.1 nuc1" in local.conf.
Basically my expect script does: 'ssh test@10.11.12.1 "pyctl nuc1 <arg>" and runs a python script there that controls power for a label called nuc1'.
The reason why my expect script has to ssh into another machine is because of network topology, and that machine is the one actually connected
to the test rack and the power strip. That's why TEST_POWERCONTROL_CMD and _ARGS need to be customized for one's setup, the only requirement being
that it accepts: on/off/cycle as the last argument.
- if no command is defined it would use classic reboot. This is fine as long as the machine
actually reboots (as in the ssh test hasn't failed), but it's useful for "simple-setup-with-one-board-on-the-desk" scenario, where
some manual interaction is okay from time to time.
[YOCTO #5614]
(From OE-Core rev: e00f888a88d0851b088c232dec66418e575a2e90)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a nasty sstate hash corruption issue occurring where the
fact the testimage bbclass was inherited meant that the checksum
changed due to testimage.bbclass being confused with image.bbclass.
This patch anchors the bbclass names to avoid this confusion.
(From OE-Core rev: 943a75a4f3b6877e4092dae14b59b7afef8cad3d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When RM_OLD_IMAGE = "1", we delete old images but we didn't check they
actually exist...
[YOCTO #6029]
(From OE-Core rev: 8910d3cc94899ab4d509e681b438ae96218fa777)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit adds a new _cleanup() internal method that will be called at
the end of rootfs creation, so that each backend can delete various
files that were probably generated during rootfs postprocess execution,
etc.
[YOCTO #6049]
(From OE-Core rev: 6151d69875f3f4f097b6e2fdef2a0f3ab391e2fd)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not delete the __db.00* files in the PackageManager class. Leave this
operation up to the client classes. One side effect of this deletion was
the following message appearing in the output of the next rpm command
executed:
rpmdb: BDB1540 configured environment flags incompatible with existing
environment
We might also gain some time here by not deleting/creating those files
very often.
[YOCTO #6049]
(From OE-Core rev: 12e300f0af2a27c15d80298d3fbb27b092c35154)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test failed when more than 1 error or 1 warning is present.
Also pasting the bitbake output when the test fails.
(From OE-Core rev: abc691026592b406e69f8bf9e4fffe2e6a17fffc)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The native sysroot should not be used as a store for the lists files since
multiple images running at once would conflict over this. Instead redirect
this to WORKDIR. This means some extra directories need to be created.
Also create apt.conf.d to silence some warnings.
(From OE-Core rev: dc4abfc8f99c08e0c1ac9d098ce17838d0eda028)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
a) There were missing parameters to the release and package commands (".")
b) The commands need to be executed as one block since they build upon each other
(From OE-Core rev: a3965b76ed4361455c89c982761263be03e1a8e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Processing directories twice is both pointless and introduces a race condition.
When building the list, ensure duplicates (like "all" and "noarch") are handled
correctly.
(From OE-Core rev: 4c487543422ae471a01a573bab44e3f6a6d2497a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we created a new PkgsList object that will deal with listing the
installed packages in a rootfs, use the new class both for images and
SDKs in the wrapper functions.
The old list_installed_packages() wrapper listed only the packages inside
an image rootfs. It didn't deal with target/host SDK rootfs's.
(From OE-Core rev: 8fc18e67504db5b6df3fdd239c6187a71af52656)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit creates a new class that has the only purpose to generate
various listings of installed packages in the rootfs.
Basically, the methods involved in listing the installed packages, that
were part of each backend PM class implementation, were moved to this
new class.
This change avoids instantiating a new PM object just to get the list of
installed packages in a certain rootfs.
(From OE-Core rev: a7290ed13378826723d1edc7e828eab848eaad10)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use apt-ftparchive to create a Release file compatible with SecureApt.
apt-ftparchive is also a more efficient replacement of
dpkg-scanpackages:
root@neopili:~/curro/qtec/qt5022/build-qt5022-cesium/build/tmp/deploy/deb/bobcat
_64# time PSEUDO_UNLOAD=1 apt-ftparchive packages . >/tmp/kkk
real 0m26.873s
user 0m20.968s
sys 0m1.212s
root@neopili:~/curro/qtec/qt5022/build-qt5022-cesium/build/tmp/deploy/deb/bobcat
_64# time PSEUDO_UNLOAD=1 dpkg-scanpackages . >/tmp/kkk
dpkg-scanpackages: info: Wrote 6022 entries to output Packages file.
real 0m59.721s
user 0m16.668s
sys 0m11.164s
apt-ftparchive is not compatible with libpseudo. The calls to ftw()
returns the path in absolute format instead of relative. This
produces
wrong Packages and Release files.
ie:
MD5Sum:
d20227a958f6870137ce0e41b7b84307 1453
/home/ricardo/curro/qtec/qt5022/build-qt5022-cesium/build/tmp/deploy/deb/all/Release
This is why it is called with PSEUDO_UNLOAD.
(From OE-Core rev: c9899a7605f15f7f1ae30c4624d53c7da825b00a)
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will let folks extend the oe package with modules from other layers.
Given openembedded consists of more than just oe-core, I think this makes
sense, and adds some useful flexibility.
(From OE-Core rev: 8dfd28925fc47d8a4a1f10ec65df665c8326edc4)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If some service is to spammy we might miss the login, so search
in the entire log instead of just the last few lines.
Use qemu in regex too (to avoid a login string from some service).
(From OE-Core rev: 1117d25fdfabbf1afdc7030e05efc6a32df871e3)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was wrong and if one would do TEST_TARGET = "SimpleRemoteTarget"
instead of TEST_TARGET = "simpleremote" it would complain
that there is no such controller when there is.
(From OE-Core rev: 47d2049d13ab71e0310e9eedaf307d6c3e530b44)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We had the ability to use a custom port for the ssh connection,
but we weren't using it.
(From OE-Core rev: c1f2a3c41969df0b7f08cf314b2cb7c9a6030092)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After recent bitbake-worker changes [1] this was killing the bitbake-worker,
which isn't what we want and kill(-pid) was the wrong call anyway.
runqemu.pid is the right PGID as the process was started with preexec_fn=setpgrp
(so no need to do os.getpgid(self.runqemu.pid))
[1] http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=15688798520896690561824b2fdc227c8a365c82
(From OE-Core rev: f4bf21b40ec6fa07c4a7bb450e3cfae12128dc2c)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding a common interface to add predefined package manager
channels to prebuilt rootfs:es.
Adding PACKAGE_FEED_URIS = "http://myre.po/repo/, will
assume repo directories named (rpm,ipk,deb) as subdirectories
and statically add them to the rootfs, using the same PKG_ARCHs
as the build which produced the images.
Tested with RPM, IPK and DEB.
deb feed functionality seem broken, is anyone using this ?
(From OE-Core rev: 9b8811045546ad67b4695d980f09636d5506e50c)
Signed-off-by: David Nyström <david.c.nystrom@gmail.com>
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* I've noticed errors like this in log.do_package:
DEBUG: Executing python function package_do_filedeps
sh: 1: Syntax error: "(" unexpected
sh: 1: Syntax error: "(" unexpected
DEBUG: Python function package_do_filedeps finished
which are actually caused by some filenames included in package
containing '()' characters
Maybe we should change meta/classes/package.bbclass to
fail when some filedeprunner call fails like this and fix
filedeprunner to escape '()' and other possibly dangerous chars
it's called like this:
processed = list(pool.imap(oe.package.filedeprunner, pkglist))
* don't use shell=True
* show the command when it fails and let do_package task to fail
(From OE-Core rev: 148c04c1bf39ca0d21288fdce61c51dc8e1c3226)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1) Some values should have default values in order for tests like sstate relocation to be relevant
- SSTATE_DIR needs to have default value
- SSTATE_MIRRORS need to be unset (we need the sstate files to be created)
- TMPDIR needs to be in default location
2) Added conf/auto.conf to list of ported files to secondary build directories
(From OE-Core rev: 3b98de79e14c44e70fd72ed94493a674444bdba2)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1) Some of the checks made when creating new directories are unnecessary beacause
the test will fail anyway if os.mkdir() fails, with the appropriate error message.
Removing this code.
2) Moved the adding to tracked paths for deletion of temporary build directories
and sstate-cache directories to after they are created. This makes more sense
and prevents deletion of these directories if they allready exist and may contain
useful data.
(From OE-Core rev: d002bcf7f80fd9652d3f310957c99bd1e6c8b3a1)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As we now require Python 2.7 and os.path.relpath() was added in 2.6 we can now
drop the reimplementation in oe.path.
oe.path.relative is simple now a wrapper that changes the order of the arguments
and it's use discouraged.
(From OE-Core rev: 1a03cd16401d2926bba902ffc5df30911b5c9394)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a command executed with subprocess.check_output() fails, the
subprocess.CalledProcessError.output contains only STDOUT and the user
needs to check the log.do_rootfs to see any other details.
This commit forwards stderr to stdout so that, in case of failure, the
entire error output will be displayed in terminal.
[YOCTO #5902]
(From OE-Core rev: 4661f1441429952f30e19cebd93dc42ce31fd868)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since tasks were renamed to packagegroups some time ago, this variable
name implies that its usage is necessarily related to them which is not
the case. Rename the variable to more closely represent what it does
(whilst still providing backwards-compatibility with a warning for
PACKAGE_GROUP).
(From OE-Core rev: d703e07ea5056624101e1bc48f10d25b602635e9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This more accurately represents what this image and packagegroup are
intended to provide (a more complete command-line environment similar
to what you would find on a traditional Linux system), and avoids
confusion with the similarly named core-image-base and
packagegroup-base.
Fixes [YOCTO #2424].
(From OE-Core rev: 959396d5319df6d6599cc74077e85182768b92af)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure the channel was not already added, before attempting to add.
[YOCTO #5890]
(From OE-Core rev: 0574f5390fb8958db5864f41a7bd8037ac046ac5)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Converting a list to a set does not keep the order of the items, as they
were added, which might result in the wrong packages being installed in
the final image...
This reverts commit 12f47c23df.
[YOCTO #5890]
(From OE-Core rev: 495cce9c9e63484c740aa669facb995b0ef74f85)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We see these from qemu images on servers under load. They're not interesting
and clutter the build output so lets ignore them.
(From OE-Core rev: 053eba4885ab4016f7efc7899ec9e02df3384d11)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed tests for sstate-cache-management.sh that ware failing due to:
- recent changes to sstate-cache structure
- recent changes to the script itself
(From OE-Core rev: 17b518caf253b77101b357564f8ef9e07961f12c)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should make it clear what methods a subclass
needs to redefine.
(From OE-Core rev: a4e4de4189cec3076a863c32c98e02766187ab48)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After recent changes in poky this test was not working as it should.
This commit fixes and improves the test logic.
(From OE-Core rev: 45709d1eae28fc567c5dca9a48393d56d28f785d)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the SimpleRemote target where we need the host ip and
it wasn't set in conf, we tried to determine it automatically.
However ip route output isn't the same for every network, we
need the last field from the first line.
(From OE-Core rev: 19af3ac53690b1bd2fee54827090f59c525d2236)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous implementation was checking IMAGE_PKGTYPE and created the
index files just for the backend used to create the image. Apparently,
'bitbake package-index' should attempt to create the index files for all
backends specified in PACKAGE_CLASSES.
[YOCTO #5827]
(From OE-Core rev: 0521d48a1612bfc735e2c86acc9b685c1dc389ef)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the output from opkg-query-helper.py is empty, output.split('\n')
would result in a list containing one element which is an empty string
while iterating over each line in the output. An exception is then
thrown by the line:
pkg, pkg_file, pkg_arch = line.split()
with the message:
Exception: ValueError: need more than 0 values to unpack
To avoid this, we add a condition to only split the output if it isn't
empty.
(From OE-Core rev: ee7b75c895e77ab20f728423c8efc2ced92265e8)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We shouldn't be running this if it expands to None or "" or False
so update the code accordingly.
(From OE-Core rev: 255079780729f0dd9df6f35302169e0c8480eced)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The import oe.package_manager line is redundant, let's remove it.
(From OE-Core rev: ade1f3ce34489bba5a7ab23793c1d82559150583)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The _multilib_sanity_test installs multilib packages in a temporary
root fs, and compare with the current image to figure out duplicated
files that come from different packages.
While incremental image generation enabled and the previous image
was existed, there was an Multilib check error:
...
ERROR: Multilib check error: duplicate files tmp/work/qemux86_64-poky-
linux/core-image-minimal/1.0-r0/multilib/lib32/lib/libc.so.6 tmp/work/
qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/lib/libc.so.6
is not the same
...
The reason is the file in the existing image has been prelinked by
previous image generation and the file in a temporary root fs is not
prelinked, even though both of them came from the same package, the
Multilib check failed.
[YOCTO #1894]
(From OE-Core rev: 8d813f614cdfda31c85bbaf133f2822f90a4a78a)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While incremental image generation enabled and the previous image is
existed, if BAD_RECOMMENDATIONS is changed, the operation on the
existing image is complicated, so remove the old image in this situation.
The same with PACKAGE_EXCLUDE and NO_RECOMMENDATIONS.
[YOCTO #1894]
(From OE-Core rev: 0566de3fa424af3bdfadcd0a08ce4c214abda083)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The incremental image generation is based on the previous existing
image, adds new packages, upgrades existing packages, and removes unused
packages.
[YOCTO #1894]
(From OE-Core rev: adf587e55c0f9bc74f0bef415273c937401baebb)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the following three functions to OpkgPM class:
- The 'dummy_install' is used to dummy install pkgs, and returns the log
of output;
- The 'backup_packaging_data' is used to back up the current opkg
database;
- The 'recover_packaging_data' is used to recover the opkg database
which backed up by the previous image creation;
Tweak 'remove' function in OpkgPM class, which the options for remove
with dependencies was incorrect.
Tweak 'handle_bad_recommendations' function in OpkgPM class:
- Fix none value check;
- Add the existance check of opkg status file;
[YOCTO #1894]
(From OE-Core rev: 5df18065e267a7e55a990ac3728414bb6e28a723)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The function create_full creates the manifest after the package in
initial manifest has been dummy installed. It lists all *to be
installed* packages. There is no real installation, just a test.
[YOCTO #1894]
(From OE-Core rev: 494adecd878496c2edc663ba09a456a9735d8252)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* change the text a bit, because I have trouble parsing two
verbs at the beginning of sentence.
(From OE-Core rev: 9837d194682f46e3a0363765bd6b317180a4cda0)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Small error in the package list creation routine. Buildhistory was
supposed to use this but was never called. Hence, it escaped tests...
(From OE-Core rev: eaa1994ad22730cec8e8c57736915da6b45a416e)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit adds a dependency mechanism to image creation, so that we can
split the images creation execution in groups, that can be executed in
parallel, having the dependencies satisfied in the same time. The old
code didn't need this since everything was serialized.
Technically, it adds a dependency graph topological sort class that the
main Image class can use to sort out the dependencies.
Images that have dependencies have to declare them using the NEW
IMAGE_TYPEDEP variable, like in the example below:
For:
IMAGE_FSTYPES = "i1 i2 i3 i4 i5"
IMAGE_TYPEDEP_i4 = "i2"
IMAGE_TYPEDEP_i5 = "i6 i4"
IMAGE_TYPEDEP_i6 = "i7"
IMAGE_TYPEDEP_i7 = "i2"
We'll get the following image groups, sorted out by their dependencies:
[['i1', 'i3', 'i2'], ['i4', 'i7'], ['i6'], ['i5']]
The algorithm can probably be optimized but, given the small size of the
graphs, it'll do.
[YOCTO #5830]
(From OE-Core rev: db9dd4b4ef9120baccbccae77d9c31f54a6eb9a1)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We override LDCONFIGDEPEND to be empty string for uclibc
however the current check is for it being None as a result
the function is still executed but ldconfig-native is not
built as dependency for rootfs when building with uclibc
Fixes errors like below
File:
'/home/kraj/work/angstrom-repo/sources/openembedded-core/meta/lib/oe/rootfs.py',
lineno: 191, function: _run_ldconfig
0187: def _run_ldconfig(self):
0188: if self.d.getVar('LDCONFIGDEPEND', True) is not None:
0189: bb.note("Executing: ldconfig -r" +
self.image_rootfs + "-c new -v")
0190: self._exec_shell_cmd(['ldconfig', '-r',
self.image_rootfs, '-c',
*** 0191: 'new', '-v'])
(From OE-Core rev: 315a71e00928fea6715087b1ce66f8a8a91d5fe0)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 3f49597225.
This change appears to cause more problems than it fixes since the
compression commands usually work in the deploy dir but the archive ones
have always worked in the rootfs dir (which is clear from the tar command
we use).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The working directory needs to be changed before the image creation
commands instead of afterwards.
(From OE-Core rev: 9d9bca8785911e8ae06d507bbfb99d6a811f072e)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its perfectly reasonable to call -c package-index with empty package
directories. This ensures the builds don't fail in such cases,
resolving autobuilder failures.
(From OE-Core rev: 11e2aaf2d751277e3e99ac2acbbeff2b7227be94)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the code from anonymous function in rootfs_rpm.bbclass has been
removed, MULTILIB_PREFIX_LIST variable was never set. Hence not all
directories got indexed.
This commit will move the multilib prefix list computation function from
RpmPM class to RpmIndexer, since the indexer needs it too. I was hoping
to avoid this but, unfortunately, I couldn't.
(From OE-Core rev: d3ba249aa1bf68aaeed226e934a4f4d5b7a19286)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previous commit added support for sum 'compression' (rather
postprocessing) of jffs2 images. Drop support for sum.jffs2 image type.
(From OE-Core rev: 295c6c1452c8789a8b1d0090ff09a5cd7cf16507)
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the package-index.bb needs to create package indexes outside
do_rootfs environment, move the indexing capability out of
PackageManager class to a smaller Indexer class.
This commit:
* simply moves the indexing functions for ipk/deb with no changes;
* rewrites the RPM indexing function so that it can be easily moved out
of the PackageManager class;
* removes some RPM duplicate code, moves it into a method inside
RpmPM class and changes the RpmPM constructor so that the new method
is effective;
(From OE-Core rev: d339d6f48f81330e94162f333aad76f3c65d6bfd)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some odd reason (at least I couldn't find an explanation to this,
yet), if a multilib version of a package is installed after the main one
(that is: in a different smart session), the main package binaries are
not overwritten.
This commit restores the functionality to the original one, before
migrating to python: feed all the packages to smart, apart from attempt
only ones which are installed separately.
(From OE-Core rev: 1fa94697163f16cdbb1499b57f1bc018546974ee)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit whitelists some common directories, so the multilib sanity
checks pass and also fixes an issue in lib/oe/rootfs.py when the
compared files do not exist.
(From OE-Core rev: 4615ac771175cd413f461c081f7d3191c49ccc4b)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TEST_SUITES = "auto" would run smart tests even for non-rpm images,
which is pointless.
(From OE-Core rev: 1913f38d79a56f7d21999b6839835f967ca28abd)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A previous commit broke downloads
when proxies are involved, let's fix it.
(From OE-Core rev: 97e263b99cbe8184a74f80738fd471cfdef29e0c)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Print the entire command output in case of errors.
(From OE-Core rev: 2253c9ac2caa61dee0bd4fea04d4d77b79be7b36)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use python sets instead of lists, to avoid duplicates. When doing a
multilib build, "smart channel --add" fails because it tries to add
'all' channel twice.
(From OE-Core rev: 730d675090eec5c03e444f0448d96a52035d0bef)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're just attempting to install packages and the package list is
empty, just return.
(From OE-Core rev: 8bf5d80e3502a71fdda688aace0799b47ae19b3b)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using opkg as the PM backend, one has the option to provide custom
feeds to create the rootfs from.
This commit:
* fixes this in the refactored code;
* moves the custom config creation code to python;
* clean up the package-ipk.bbclass;
(From OE-Core rev: 19c538f57c8fa7c566e88a6dbe13ea4826d4f26c)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following commit:
rootfs_ipk: Ensure that BAD_RECOMMENDATIONS are honoured for all
architectures
changed the way BAD_RECOMMENDATIONS are handled. Make the change in the
new code too.
(From OE-Core rev: 7e518e399da51de3b159bd6804735b2f14c39357)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using stamps shortens rootfs/image creation because the package indexes
are not created again if no new package was installed in the deploy dir.
Unfortunately, there are some syncronization issues with
do_package_write_*() and the indexes are not properly created.
Will have to revisit this issue in the near future. For now, lose it.
(From OE-Core rev: 276f2a8a072ce243daa74210934ee63046e9c480)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Status file path was not created correctly.
(From OE-Core rev: 628c4bce36ca0bc2b316ec78cf58b02a42e7f35f)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit:
* adds missing mark_packages() function for OpkgPM. This is needed to
* manually change the packages installation status in the status file;
* fix OpkgPM remove_packaging_data() issue;
* fix OpkgPM handle_bad_recommendations() issue;
* improve OpkgPM/DpkgPM mark_packages() regex pattern;
* fix DpkgPM list_installed() problem;
* fix DpkgPM _create_configs() problem: status file should not be
truncated if it already exists/
(From OE-Core rev: d50a40100763dcbfabec2c147fdfcb46aa909329)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The IMAGE_ROOTFS_EXTRA_SPACE value was not correctly added to the base
size.
(From OE-Core rev: f3ac2a68ae0ae9bdf2a03c1b6d0f83c9918d58bd)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The idea of postinstall intercept hooks is to run CPU intensive
postinstalls (like the ones generating font/pixbuf/icon caches) on host,
at rootfs generation time. So, ideally, the user would like to know if
the intercepts fail on host.
With this patch, the user will see warnings on console if intercept
hooks fail to execute.
(From OE-Core rev: 5666ce9720132a76b5ff6e99712e240b8dc8e47a)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit:
* fixes a crash when handling interecept hook failures which happened when
MULTILIB_GLOBAL_VARIANTS was not set;
* convert dashes to underscores and use sets (so that we make sure the
items are unique) when creating RPM repos;
* uses a regex pattern to search for packages in the feeds list. The
old method could match also strings in the middle. For example: 'rpm'
matched 'kernel-module-lttng-probe-rpm" in qemux86_64 feeds;
* issue a bb.fatal if smart returns error while installing packages.
Otherwise we might end up with an incomplete image...
* fixes the /etc/rpm/platform file creation;
(From OE-Core rev: b98c7e4945f1c36a6e4f98144a3af4f3049450ae)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- The variable D is needed by intercepts scripts;
(From OE-Core rev: 3d37dcdb836b59d8a7f880ce22d06760eb8af232)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The value of IMAGE_ROOTFS_EXTRA_SPACE is "0 + 51200",
we should use eval rather than int in python.
(From OE-Core rev: dd3418e2db732ca1bc78fd93efa3f08da88a1183)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It failed to read Kernel version from kernel-abiversion
file, the reason was it didn't strip the readline.
...
Error: Kernel version 3.10.25-yocto-standard
does not match kernel-abiversion (3.10.25-yocto-standard)
...
(From OE-Core rev: 17a0a8f44fe344ab1ae49730d9f17705b43987e5)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The refactor of shell function rootfs_uninstall_unneeded is incorrect,
it should check and update the installed_pkgs.txt file for the existance
of the packages that were removed.
...
rootfs_uninstall_unneeded () {
if ${@base_contains("IMAGE_FEATURES", "package-management", "false", "true", d)}; then
if [ -z "$(delayed_postinsts)" ]; then
# All packages were successfully configured.
# update-rc.d, base-passwd, run-postinsts are no further
# use, remove them now
remove_run_postinsts=false
if [ -e ${IMAGE_ROOTFS}${sysconfdir}/init.d/run-postinsts ]; then
remove_run_postinsts=true
fi
# Remove package only if it's installed
pkgs_to_remove="update-rc.d base-passwd ${ROOTFS_BOOTSTRAP_INSTALL}"
for pkg in $pkgs_to_remove; do
# regexp for pkg, to be used in grep and sed
pkg_regexp="^`echo $pkg | sed 's/\./\\\./'` "
if grep -q "$pkg_regexp" ${WORKDIR}/installed_pkgs.txt; then
rootfs_uninstall_packages $pkg
sed -i "/$pkg_regexp/d" ${WORKDIR}/installed_pkgs.txt
fi
done
...
(From OE-Core rev: 9cdecb3935962653733705ad6313558bfd4fda29)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the bb.utils.remove(self.image_rootfs, True) from the base class
constructor, to Opkg/Ipkg constructors after super's constructor is
called.
(From OE-Core rev: 66d86c4bbb9423c9fe0fc89005530be54068d401)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Ricardo Ribalda Delgado
Paul Eggleton
Stefan Stanacar
Otavio Salvador
Andreas Müller
Alexandru Palalau
Corneliu Stoicescu
Matthieu Crapet
Laurentiu Palcu
Christopher Larson
David Nyström
Martin Jansa
Ross Burton
Jonathan Liu
Hongxu Jia
Khem Raj
Dmitry Eremin-Solenikov