Updating gtk+ to 2.23.2 requires gdk-pixbuf, which is originaly a module in gtk+.
Borrow hardcoded_libtool.patch from original gtk+, and add configure_fix.patch
to fix build failure in cross-compile environment.
As gdk-pixbuf is a stand-alone package now, gdk-pixbuf-csource-native can be
safely removed. So extend gdk-pixbuf with native support, and make related
packages depend on it.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
The previous implementation of invalid commit ID checks would
error early when a bad object was detected. Rather than changing
to set +e for the entire routine, we'll capture the output and
do an explicit check for a bad object and throw a useful error
message when it is detected.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
By setting BOOTSTRAP to the branch that should be used for a
currently undefined BSP a build can be completed and an
environment for streamlining the BSP created.
With the appropriate machine.conf, and a defconfig any MACHINE
can be built against and inherit the configuration of the
standard yocto kernel.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Enable beagleboard support for 2.6.37. The only non-kernel related
change for the board is to update the serial console designation.
The Beagleboard use omap serial driver, so we replace ttyS2 with ttyO2.
This is described in following link:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg40838.html
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Update pseudo to the latest version to resolve a number of optimization defects.
The problems were present on both 64-bit and 32-bit systems, but generally only
caused issues on 32-bit hosts.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
The latest mesa 7.10 has dependency on GPLv3 library talloc, so it is still necessary to keep one old non-GPLv3 mesa.And the latest non-GPLv3 version is mesa 7.8.2, so this patch add it.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- add SRC_URI checksum
- remove the DEFAULT_PREFERENCE for atom_pc, since mesa 7.10 has dependency on GPLv3 talloc. the latest non-GPLv3 one is mesa 7.8.2, atom_pc can use that vesion.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- update license checksum due to commit "COPYING: add three missing authors listed in synaptics.c". the license type is unchanged.
- Pass correct "sdkdir" value for cross compiling
Signed-off-by: Yu Ke <ke.yu@intel.com>
- also pick one patch from upstream to fix the cross compiling error during the do_configure. it can be safely removed in the next upgrade.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- update license checksume due to the commit "COPYING: replace stub with actual copyright notice". it provide more accurate license info. the license type is unchanged.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- update license checksum, due to commit "Sun's copyrights now belong to Oracle". the license type is not changed.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- LICENSE_CHECKSUM changed due to the commit "COPYING: replace stub with copyright notices". this commit add more accurate license info, and the license type is still MIT-X.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- LICENSE checksum changes due to that "Sun's copyrights now belong to Oracle". it is corp name change only, the license is still MIT-X.
Signed-off-by: Yu Ke <ke.yu@intel.com>
Keep the la files in source directories unchanged,
and do relocation in destination directories (sysroot-destdir).
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
{e}glibc should install the scsi/*.h files, which are needed by hal.
Currently hal can build because eglibc-initial (which has its own do_install)
installs the files. In future eglibc will have its own sysroot, so hal
won't build.
BTW: in OE side, eglibc's do_install also doesn't remove the files.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Currently gcc-runtime installs the files, but actually gcc-runtime's
do_configure checks if the files are available, so before we build gcc-runtime,
we should have some recipe install the files first! -- currently
gcc-cross-intermediate actually does that(gcc-cross also installs the files,
but it installs into the gcc-build-internal* directory), but
gcc-cross-intermediate will have its own sysroot in future, after that,
gcc-runtime won't build. So let us add this new target recipe and move the
installation of the files from gcc-runtime into it.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
The switch to KARCH meant that the arch arm settings were not
being applied to all boards. This commit adds the new option
along with the existing one to cover all boards.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating the SRCREV to capture this commit to the 2.6.34 kernel:
linux-2.6-windriver: atom-pc-preempt_rt meta-data
The following patch adds support for the preempt_rt kernel type
for the atom-pc machine. It should be applied to the wrs_meta
branch.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Enable the parameters required for systemtap for all BSPs based
off the standard kernel type.
CONFIG_KPROBES=y
CONFIG_RELAY=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
ExtUtils::Embed ccopts is getting the host's -I/usr/local/include and
using it to compile perf, which results in a compilation error that
started appearing just recently.
This turns the code that makes use of ExtUtils::Embed off and simply
hard-codes NO_LIBPERL.
It does the same for LIBPYTHON while we're at it, since it probably
suffers from a similar underlying problem and just by chance hasn't
broken anything yet.
This will be re-enabled after I familiarize myself with the perf
recipe and am able to create a proper fix.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Fixes [BUGID #595]
Because of the QEMU booting slowness issue(see bug #646 and #618), autobuilder
may suffer a timeout issue when running sanity test. We introduce variable
SHARE_IMAGE here to fix the issue. It is by default set to 1. Poky will copy
latest built-out image and keep using it in sanity testing. If it is set to 0,
latest built-out image will be copied and tested for each case, which will take
much time.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
PACKAGE_ARCHS represents all compatible architectures for a given machine.
It makes no sense for this variable to change any task checksums as it doesn't
inject any machine dependency into any known task. Multimachine means machine
specific packages will be detected through other variables.
Before this patch, even native packaging tasks were ending up being marked as
machine specific.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes 'kernel-modules' installable again when perf isn't enabled in the kernel config
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe was unsetting LDFLAGS, resulting in:
NOTE: QA Issue: No GNU_HASH in the elf binary: '/OE/tentacle/build/tmp-angstrom_2010_x/work/armv7a-angstrom-linux-gnueabi/wpa-supplicant-0.7.3-r0/packages-split/wpa-supplicant/usr/sbin/wpa_supplicant'
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
The routerstation pro and mpc8315e-rdb have been validated
on 2.6.37 so we can switch their preference to linux-yocto
and update the machine compatibility to add them to the support
list.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Upgrade to 6c696cec3f264a9399241b6e648f58bc97117d49 which
includes fixes to the Makefile to allow for user override of
CC and AR via the environment as well as python SWIG wrapper
fixes.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
for hostperl needing to load .so files (for module scalar::util) the host/native
perl library path is placed 1st in the @INC with the -I parameter to perl.
Otherwise hostperl gives error can not load module scalar::util.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
We use host perl while building target perl modules. When some of the
prebuilt perl modules such as scalar::util are used in the build process
directly or indirectly, perl needs to load the arch specific .so library
file. If perl can not find the .so library files, then perl
tries to use the target pm files which ends up in circular perl module
depedancy causing build time perl invocation to fail.
Adding this new parameter viz EXTRA_PERLFLAGS to cpan.bbclass allows perl
module recipes to specify the location of such host .so files for hostperl,
so that build time invocation of perl does not fail.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
perl 5.12.2 does not use /usr/share/perl path, and all that stuff goes
in /usr/lib/perl. This commit fixes cpan class which depends on
/usr/share/perl.
cpan.base/build.bbclass: change /usr/lib/perl5 to /usr/lib/perl
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Deleted these patches as they are part of the upstream code now.
deleted: files/perl-5.8.8-gcc-4.2.patch
deleted: perl-5.12.2/makedepend-dash.patch
deleted: perl-5.12.2/native-no-gdbminc.patch
deleted: perl-5.12.2/54_debian_perldoc-r.patch
And rebased these patches to the newer source code
modified: files/letgcc-find-errno.patch
modified: perl-5.12.2/Makefile.patch
modified: perl-5.12.2/asm-pageh-fix.patch
modified: perl-5.12.2/native-nopacklist.patch
modified: perl-5.12.2/native-perlinc.patch
modified: perl-5.12.2/Makefile.SH.patch
modified: perl-5.12.2/installperl.patch
modified: perl-5.12.2/perl-dynloader.patch
modified: perl-5.12.2/09_fix_installperl.patch
get patches from debian perl ver 5.12.2-2
the fakeroot.diff patch from debian is conflicting with our
Makefile.SH.patch, hence disabling the fakeroot patch
use newly created config files
Created with current milestone branch on qemu machines
modified: config.sh
modified: config.sh-32
modified: config.sh-64
get some changes from oe's perl 5.10.1 recipe
fix the Makefile.SH.patch use miniperl instead of perl
import a OE 5.10.1 patch: uudmap_cross
fix install issues
add /usr in the destdir, so that perl gets installed in
/usr/bin/perl and not in /bin/perl
link /usr/lib/perl to /usr/lib/perl5 so that operations with
/usr/lib/perl path in them keep on working.
Fix/Improve perl packaging
avoid perl-module-module-* kind of packages
recreate perl-rdepends_5.12.2.inc file with new set of packages
import from oe perl-rprovide_5.12.2.inc
combine all unicore perl scripts in one package
simplify perl-lib
reduce no of perl recipe packages greatly.
Add zlib to depedancy
fix buildtime host contamination
This also fixes [BUGID #384]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Fixes [BUGID: 620]
Update the SRCREVs to include the full 2.6.37 release plus the
forward port of the alternate RPC port patch. With this fix,
we can complete usermode NFS booting of all the qemu* targets.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Update the SRCREV to pickup changes to update the use of
WRS_* to be K* to provide more generic names for the
platform/board/kernel configuration options.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating to reflect the changes from Darren Hart:
[
linux-yocto-2.6.37: Add debugfs and ftrace features to standard ktype meta-data
ftrace provides low impact tracing facilities and should be made
available on the main kernel - as opposed to a debug or tracing
kernel which often add enough overhead to mask subtle bugs.
These features are available on the 2.6.34 yocto kernel.
Boot and trace-cmd tested on qemux86-64.
Signed-off-by: Darren Hart <darren@dvhart.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #581]
The initial routerstation pro BSP went out with with command line
overrides enabled. We'd need to be able to set the command line
from Redbot, so we should disable the forcing of the built in
variant.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
configme used to be able to calculate the output/build directory
when branches were always <machine>-<kernel type>. Branch names
can now be widely different and to avoid embedding complexity
in the scripts it is easier to just pass ${B} from the build system
down to the scripts.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Current fetcher has annoying "SRCREVINACTION" deadlock,
which occurs when SRCREV=${AUTOREV}=@bb.fetch.get_srcrev():
get_srcrev()->setup_localpath()->srcrev_internal_helper()
->evaluate SRCREV->get_srcrev()
current fetcher resolve the deadlock by introducing a
"SRCREVINACTION" condition check. Althoguh it works, it is
indeed not clean.
This patch use antoehr idea to break the deadlock: break
the dependency among SRCREV and get_srcrev(), i.e. assign
a specific keyword "AUTOINC" to AUTOREV. when Fetcher meet
this keyword, it will check and set the latest revision to
urldata.revision. get_srcrev later can use the urldata.revision
for value evaluation(SRCPV etc). In this case, SRCREV no longer
depends on get_srcrev, and there is not deadlock anymore.
Signed-off-by: Yu Ke <ke.yu@intel.com>
This gets us closer to making including tune-<arch>.inc "just work".
Moving the TARGET_ARCH definitions is something for a follup patch.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bison-native encodes M4 and PKGDATA staging path in its binary, which
breaks sstate installation in a new build environment. Use create_wrapper
similar as flex-native to solve this issue
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
flex-native encodes M4 staging path in its binary, which breaks sstate
installation in a new build environment. Use create_wrapper to create
a wrapper script which explicitly set M4 environmental variable to the
new path
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
perl explicitly assigns LD to a bogus value:
oe_runmake perl LD="${TARGET_SYS}-gcc"
which breaks sstate-based build when toolchain is not generated locally,
due to lacking of --sysroot option. Use ${CCLD} instead to make this
relocatable.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
SRCPV is intended being used by PV, some recipes still use
SRCREV for PV, which is not correct. This patch fix all the
misusage.
Signed-off-by: Yu Ke <ke.yu@intel.com>
* Added DESCRIPTION, SECTION, PRIORITY, and PR fields
* Updated SUMMARY and HOMEPAGE fields to reflect more accurate info
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
binutils.inc exports its own ${CC} which is similar to default ${CC}
but missing ${TOOLCHAIN_OPTION}, which makes --sysroot option lost
when compiling target binutils which then further breaks sstate.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
The trace-cmd source includes a graphical trace viewer, but we
don't want to make the trace-cmd recipe depend on gtk+. This
patch adds a second recipe in the meta/recipes-kernel/trace-cmd
directory which uses the trace-cmd SRCREV and RDEPENDS on trace-cmd
to ensure compatibility.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
CC: Saul Wold <sgw@linux.intel.com>
The trace-cmd Makefile forces certain variables, such as CC and AR.
It was using the host gcc and loader, fix it to use the poky-built
cross-compiler and linker.
inherit pkgconfig to ensure we don't use the host pkg-config.
Remove unecessary variables from the oemake commands, such as ARCH
and LD which aren't used by the Makefile.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
Add "--enable-specs=no" to disable doc generation -- I doubt we really need
it, and it doesn't work well due to
SEVERE: Error with opening URL 'http://docbook.sourceforge.net/release/images/draft.png'.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Remove nofallbackfix.patch it as already in upstream. Remove
autoconf_version.patch as already have new version of autoconf and no inbuild
libltdl now.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Rebased disable-icu-check.patch & fix-security.patch. Removed x64fix.patch as
it is already in upstream. Also some configure changes: removing "--with-arch"
as it can't cowork with expert mode, adding "--disable-openmp" to avoid
unnecessary dependency.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
During a poky-image-minimal build I ran into the following error:
rm: cannot remove `/vol/1/dvhart/poky.git/build/tmp/work/atom-pc-poky-linux/poky-image-minimal-initramfs-1.0-r0/rootfs/install': Is a directory
This is caused by a missing -r (recursive) argument to rm. This patch
adds that to the rm command of rootfs_rpm.bbclass.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
This patch intend to fix the random unpack failure of linux-libc-headers-yocto
and linux-yocto.
The root cause of the unpack failure is that: these two recpies has the same URL, thus
has the same dest file during the fetch and unpack phase:
do_fetch : create tar ball ${DL_DIR}/git_git.pokylinux.org.linux-yocto-2.6.37.tar.gz
do_unpack : extract tar ball ${DL_DIR}/git_git.pokylinux.org.linux-yocto-2.6.37.tar.gz
fetch phase is protected by lockfile, so it works fine. but unpack phase is not lock protected,
thus there is race condition like: when linux-yocto do_unpack is extracting the tar ball,
linux-libc-headers-yocto do_fetch starts to create tar ball thus overwrite linux-yocto's
tar ball and cause linux-yocto do_unpack failure
To fix this issue, do_unpack also need to be protected by lock
Signed-off-by: Yu Ke <ke.yu@intel.com>
previously you could only build one set of packages for multiple machines:
MACHINE=foo bitbake task-base
MACHINE=bar bitbake task-base
would only create task-base packages for foo, but not for both foo and bar.
Doing MACHINE=bar bitbake task-base -c cleanall would remove the packages for foo.
The solution is to use MULTIMACH_ARCH as suggested by Richard Purdie.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
from 5.4
Largely based on the recipe from OpenEmbedded project
ncurses: fix LIC_FILES_CHKSUM
Signed-off-by: Qing He <qing.he@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
So far c++ include path is not relative to "--sysroot", which brings
trouble if we want to use the toolchain in a new environment where
the original build directory generating that toolchain is not
available. It's firstly exposed in multiple SDK sysroots support, and
then in the case when sstate packages are used, where c++ standard
headers are missing because gcc tries to search original build dir.
This patch makes c++ include path now relative to "--sysroot", and
then once "--sysroot" is assigned correctly in new environment, c++
include paths can be searched as expected.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Since connman-0.64, the D-BUS service name changed from
"org.moblin.connman" domain to the "net.connman" one.
Thus change connman-gnome accordingly.
This fixes [BUGID #619].
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
This fixes various incorrect sysroot usages observed by people with sstate.
Thanks to Kevin Tian for figuring out where the problem was and Gary Thomas
for confirming the fix.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
For these recipes the dependencies listed in RDEPENDS and RRECOMMENDS only apply to ${PN}
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
The commit for BUGID #581 fixes the blktrace build errors - it should
now be safe to re-enable the blktrace recipe.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Fixes [BUGID #581]
When PARALLEL_MAKE is used with the current blktrace Makefile, the
btreplay and btrecord object files can end up being built multiple
times in parallel, which occasionally causes the linker to pick up the
object files in intermediate and seemingly corrupt states, and causes
the spurious link errors in the bug report.
This fix restricts the recursive btreplay invocations to building only
btreplay or btrecord as appropriate, not both.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
BSPs are built from a particular branch of the kernel repository
which is specfied via the mapping of MACHINE to KMACHINE. Unless
a global branch is being forced (like libc headers), KMACHINE
is an override on a per machine basis.
Because KMACHINE is typically override we must first try the
most specific variant KMACHINE_<machine> and if that is undefined
look for a fallack default. This allows any combination of
variables to work (and at the time the anonymous python
executes) safely and get us a properly defined branch for the
fetcher and build.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
