Automatically create a json.formatted file (results.json) in the results
directory that contains results from all tests.
(From OE-Core rev: 6df3263531a41805b2280bb999cb4a73f9f91eae)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This defaults to 'oe-core' but can be defined using the
OE_BUILDPERF_PRODUCT environment variable.
(From OE-Core rev: a22cc3e04001be5d11bd85dbdceb7088cae7c735)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Write globalres log file and commit results to Git even if some tests
failed. Now that tests do not depend on each other there should be no
risk of bogus results caused by test failures.
(From OE-Core rev: 8036975b268fe209476e230555006facd3cbda71)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now failed measurements correctly cause a test failure (recorded as an
error). There should be no need to continue the test if one step fails,
especially now that the tests don't depend on each other.
(From OE-Core rev: 446e32aadc775ca146d12173b1463f524d7fe6ef)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add test set-up functionality so that the individual tests do not depend
on each other. This should make sure that a failure in one test does not
affect the results of another test. The patch also makes it reasonable
to run only a subset of the tests by using the --run-tests option.
The increase in total execution time of the full suite - caused by the
additional set-up steps - is insignificant because normally no
additional tasks need to be run. The previous test has already done all
set-up work.
(From OE-Core rev: 69b3c63e32d09ea4a41b21daacdff6bf1fc447c1)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test status check done when writing globalres log was incorrect.
(From OE-Core rev: 3efbd49fd80d2b349a8fd44dbcd509168dbc1061)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: 408b1f1879e4b90c90f6d139b08d2b6f8e555655)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: 4c1d679a0fd601ba37ab37b11f660cc41d8507ff)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: c9dd7ebb89eb4ffc9e51ef0dca8accb617459dfe)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: b8aa0d9b5bb9d0fc53e3f065eac7f1cfac83b6ac)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: ceb58f3c24f957982a80ea56e9b6fcef53dd8949)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: f37523e2d9ddf523da12aa962cf8fbe21a355d67)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: de720a8b10de17e613a8fb20d8df2af0b84507d7)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: 641ab36095eb72898ec808e655014bbc5900eb95)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default of EXTRA_OEMAKE is already empty since commit:
OE-Core rev: aeb653861a0ec39ea7a014c0622980edcbf653fa
bitbake.conf: Remove unhelpful default value for EXTRA_OEMAKE
(From OE-Core rev: 4fca6c95895d7d17cdfb637d383b28ee939fbd99)
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need master for the changes to work with 4.8 kernels.
(From OE-Core rev: ab883b74634b8fa0c179b2c42b1503fa78fcc06f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop aarch64_be patch which is now upstream.
Update doc patch to apply to latest version.
Disable man generation in configure options to match docs patch (for now).
(From OE-Core rev: 338320be00101cb182c8ccdad162076e7c3d3dbc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop backported libyaml-CVE-2014-9130.patch
(From OE-Core rev: 2dfdf483e9de5bcb24149f619b0c7fc466221204)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 6858df73073d32f6301b2302ae563670e32db134)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* recipes which don't inherit autotools or cmake bbclass and want to
use the configure options from PACKAGECONFIG need to handle
PACKAGECONFIG_CONFARGS themselves.
(From OE-Core rev: c98fb5f5129e71829ffab4449b3d28082bc95ab4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes commit 763a3d424b
Output was strange when using unzip to extract zip file.
This patch fixed so.
[YOCTO #9551]
(From OE-Core rev: 30486429ed228e387ee574c6990b361d2ade6a32)
Signed-off-by: Edwin Plauchu <edwin.plauchu.camacho@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebase pkgconfig.patch
(From OE-Core rev: 45fac4161cb230bc03c6c08d21cc768e52700f02)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove backported NIOS2 patch.
README.QUICK checksum updated; the license part of the file is unchaged.
(From OE-Core rev: ee16cc4ad552502212055af46b3e97a312a13e69)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The libnl-genl.rpm provides libnl-genl-3-200 after the following 2 fixes:
libnl: update to v3.2.28
libnl: fix packaging mistakes
$ rpm -qp --provides tmp/deploy/rpm/core2_64/libnl-genl-3-200-3.2.28-r0.4.core2_64.rpm
elf(buildid) = 4e753b2361ba0b02f162244a87cc0680796e46cc
libnl-genl = 3.2.28
libnl-genl-3.so.200()(64bit)
libnl-genl-3.so.200(libnl_3)(64bit)
libnl-genl2
libnl-genl-3-200 = 1:3.2.28-r0.4
Note, the libnl-genl2 is introduced by REPLACES_${PN}-genl = "libnl-genl2".
So that we don't need set libnl-genl-3-200 in the RREPLACES and
RCONFLICTS, otherwise it would cause do_rootfs errors when install both
libnl-genl.rpm and lib32-libnl-genl.rpm:
Computing transaction...error: Can't install libnl-genl-3-200-1:3.2.28-r0.0@core2_64: conflicted package libnl-genl-3-200-1:3.2.28-r0.0@lib32_x86 is locked
We didn't meet this error before was because there was no libnl-genl.rpm,
but libnl-3-genl.rpm, and it doesn't provide libnl-genl-3-200 by default.
Remove libnl-genl-3-200 from RREPLACES and RCONFLICTS will fix the problem.
(From OE-Core rev: a2e9e0bb7a4901f819332df30ec265616e422826)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
musl doesn't implement the non-posix compliant,
deprecated, glibc-only special version of strerror_r
that libnl had been using so far.
Backport the patch(set) that switches libnl over to
using strerror_l().
(From OE-Core rev: 3718761dd9bd841c4383b63346c1ff2c81570af6)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- *.la files belong into -dev packages
- the genl-ctrl-list command line utility should go to into the CLI
package, so as to prevent the libnl-genl library package from
pulling in all of the command line utilities (as genl-ctrl-list
is linked against libnl-cli-3.so.200)
(From OE-Core rev: 57ddcbde8aad2a2d37619e11a0cd2e9b8d9fb239)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To complete the transition/renaming to chained image type CONVERSION
while maintaining bacwards compatibility to COMPRESS(ION), make sure also
COMPRESS_DEPENDS is checked. Without this, the dependencies for legacy
COMPRESSIONTYPES do not get built.
(From OE-Core rev: 12a8ee44f05e21d5814e31cb9e13c9eab236b836)
Signed-off-by: Mikko Ylinen <mikko.ylinen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ud.pkgdir argument was being passed as the 'quiet' argument to
runfetchcmd, not the 'workdir' argument, resulting in fetching the svn module
into the root of DL_DIR, not where it belongs.
Cc: Matt Madison <matt@madison.systems>
(Bitbake rev: dc756510a95f88b192352be6fcd1d5d77852c348)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, there is a check to remove the TOSTOP attribute from
a tty to avoid hangs. It assumes that sys.stdout will have a
file descriptor and this is not always true, some IO classes
will throw exceptions when trying to get its file descriptor.
This will add a check for such cases and avoid throwing an
exception.
[YOCTO #10162]
(Bitbake rev: cb4f8f6efa28ef2b13bc738a0118b876baa15b3e)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need to force everyone to use git for the method in which
openembedded-core is downloaded. For instance it could have been
downloaded and extracted as a tarball.
(Bitbake rev: 8b7180332691a41a013e07a52b26018402141b6a)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We no longer only deal with layers that have their source in a gir
repository, we also allow for local directories too so update the
BRLayer model to reflect this.
(Bitbake rev: a15f61f3ef5a87b87121457f76592c87f0ea5d7f)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add selenium tests for the new layer source switching functionality on
the layer details page. Edits the values for git repository and saves
and then edits the details for directory information and saves.
(Bitbake rev: acdfafdd753abe38a313c42e3a9d6211338b4e73)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We now have a dedicated file for the rest API so move and rework for
class based views. Also clean up all flake8 identified warnings.
Remove unused imports from toastergui views.
The original work for this API was done by Elliot Smith, Ed Bartosh,
Michael Wood and Dave Lerner
(Bitbake rev: 37c2b4f105d7334cdd83d9675af787f4327e7fe7)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to a copy paste error we managed to get some of the wrong
information in the oe fixture that provides a suggested default settings
for Toaster. This meant it tested correctly when it shouldn't have.
Fix:
- The use of local bitbake
- An incorrect call to realpath which didn't include its parent module.
- The field used for the local_dir of an existing openembedded-core
(Bitbake rev: d57a9124650e5367919668dfccf6aad4962a77f1)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few clean ups for the work done to integrate editing imported local layers
into the layer detail page.
(Bitbake rev: 092ef32e695b43c3337b7116722c4c6eba981396)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Markus Lehtonen
Stefan Müller-Klieser
Richard Purdie
Alexander Kanavin
Maxin B. John
Martin Jansa
Edwin Plauchu
Robert Yang
André Draszik
Mikko Ylinen
Christopher Larson
Mariano Lopez
Michael Wood