Make the following improvements to the show-overlayed subcommand:
* Show recipes that are overlayed when the version is higher or lower,
not just when it is the same. This gives a much better picture of the
influence each layer is having over the metadata used for building.
This can be disabled with the -s option if you just want to see
recipes with the same version as before.
* Default to showing name (PN), layer and version rather than the full
path and filename. The old style formatting can be used by specifying
the -f option.
* Mark skipped recipes as such in the output, and print them in the
correct sorted place in the list rather than at the end
* Prefix/suffix title line with === so it can be filtered out easily in
shell scripts if desired
(Bitbake rev: 43b473275d3cb2e60a14e4a52cdc4654b3f4e5e7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By calling init_parser which sets up the siggen code after the ConfigParsed
event is fired, we can allow the metadata to add siggen classes which
was always what the code intended.
(Bitbake rev: 69fd5ad4a8402fab5eb8348260966b337c5648ff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids some silent parser hangs we were seeing which were
near impossible to debug as no user feedback was given.
[RP: Tweak commit message]
(Bitbake rev: d104f29871c04a5a36600a35b2568b49e5b21ca0)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the error logged within cooker summarising the list of failed
tasks, and instead print this in the UI (knotty) where it belongs. This
also adds the actual name of the task that failed as well as the
corresponding recipe file that was being shown previously.
In addition, reformat the summary messages more tidily - no extra breaks
between lines and use correct English singular/plurals, with some
allowance for future translation.
(Bitbake rev: cdf69913f99d28bc7f51067a60257701f952c6cb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improves error output for matching problems when the -b / --buildfile
command line option is used.
Rename MultipleMatches exception to NoSpecificMatch (as it is also
raised when there are no matching recipes) and make it inherit from
BBHandledException so that it doesn't print a stack trace (we always log
an ERROR prior to raising it.)
In addition, improve the formatting of the error message - only call the
log function once rather than once for every match, and use a more
appropriate message if there are no matches.
Fixes [YOCTO #1141]
(Bitbake rev: 803550a5098ec878164245e71344c3d687310b72)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1126]
A local PR service will be started and stopped automatically along
with the bitbake invocation/ternimation.
This local PR service will be started only and if only when the
PRSERV_HOST is set to 'localhost' and PRSERV_PORT is set to '0'.
When started, the sqlite3 database is stored at
"${PERSISTEN_DIR}/prserv.sqlite3" or "${CACHE}/prserv.sqlite3".
(Bitbake rev: 9d8f45407c67ed0d3c4f820cf646de3c385067c7)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no direct use of command in cooker.py, and it is using
bb.command instead. Remove command in the import list.
This fixes a problem of embedded import between command.py and
cooker.py.
(Bitbake rev: c353316b2efcc7a893d6b4aa9a9647d51a6f69e3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no direct use of command in cooker.py, and it is using
bb.command instead. Remove command in the import list.
This fixes a problem of embedded import between command.py and
cooker.py.
(Bitbake rev: 92fec2788e33d301cc63848901bc6adc764a2ecf)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initCooker is to set the cooker to the initial state with nothing
parsed.
(Bitbake rev: 8ee9c6cc47938604268242d90bd3007218f9a36e)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For buildTargets function, we use bb.configuration.data as parameter
to inject events, since in hob environment, some variables are
modified dynamically and bb.configuration.event_data may out of date.
(Bitbake rev: 487a124942fd5cd9de71413b79a4049a6d26f1e8)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The assignments of self.configuration.cmd in BBCooker seems duplicated,
have the followings in both BBCooker::__init__ and
BBCooker::loadConfigurationData:
if not self.configuration.cmd:
self.configuration.cmd = self.configuration.data.getVar("BB_DEFAULT_TASK", True) or "build"
The __init__ invokes the loadConfigurationData, and it would make sure
that self.configuration.cmd has been assigned a proper value, so we can
remove the one in __init__.
[YOCTO #1791]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using bitbake -e -b virtual:xxxx:/path/to/the.bb would result in
zero matches since the virtual:xxxx piece wasn't being processed.
This adds in the necessary functionality to handle it correctly.
[YOCTO #1793]
(Bitbake rev: bd5a727c8447bcb747c1d2463b7de2ab6d21a7de)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bitbake codebase makes assumptions that only one copy is active
against a given build directory at a given time. This patch adds a
lockfile in TOPDIR to ensure that is the case.
Note that no unlock is needed, that is automatically dropped when
execution terminates.
(Bitbake rev: 6004cbf36c980c2574c1c9153df81a7c55317e17)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake -s was not displaying correct version information when the
PREFERRED_VERSION string contains other variables. The actual built
versions would differ since the providers.py functions were called
with expanded keys at this point.
This patch expands keys for showVersions bringing everything into
sync correctly.
[YOCTO #1493]
(Bitbake rev: 3a0f2dda3c6de993f08ed50e9d513add9407339c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recent change which modified inheritFromOS to use the intial
environment, rather than the current environment, introduced a bug such
that variables which had been cleaned from the environment where still set
in the data store.
This patch changes things such that a list of approved environment
variables is saved after the environment is cleaned and only the variables
in this list are inherited in inheritFromOS.
CC: James Limbouris <james.limbouris@gmail.com>
CC: Chris Larson <clarson@kergoth.com>
(Bitbake rev: cb6c07054e8baf94614713ec257c643b22266d75)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turn the reparseFiles logic into a command to reset the cooker's state
machine and a noop which triggers a cache rebuild.
The resetCooker command resets the cookers state machine such that a cache
update will be triggered by any async command which requires the cache.
The reparseFiles command remains as a noop async command that has the
needcache property set to True so that when called it ensures the cache is
built.
Patch from Richard with the addition of removing the force parameter from
the updateCache method.
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: a98f698fe9f38310024013e58475e6d1447ee154)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using the -e and -b options together an expection was occuring.
This was due to incorrect initialisation and this patch adds in the
correct initialisation calls.
(Bitbake rev: e7ade6dcd646b478df79f968934a0edcb63254f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the requested configuration file is found on disk check the
against the configuration files in __depends/__base_depends to ensure the
file was parsed before emitting the ConfigFilePathFound event.
If the requested file wasn't parsed just return (and don't emit).
Fixes [YOCTO #1246]
(Bitbake rev: 705d14d1e1108e0544c7eab827f1242f0839add9)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The include parameter to _parse() tells the parser whether to include the
file in __base_depends, the contents of which have their mtime tested to
invalidate the cache when they have changed.
As I understand it we would want all of the configuration files that are
currently handled with the _parse() method to invalidate the cache to set the
default value of the include parameter to True.
(Bitbake rev: 5cacdc4f1641eda1b5707c96f7c40924a9db6174)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Nothing PROVIDES" errors often come up when a recipe has been skipped
for some reason, and therefore it is useful to print out that reason
information when showing the error so that the user understands why the
error has occurred.
Given that we already feed the reason information into the skiplist for
various situations (COMMERCIAL_LICENSE, COMPATIBLE_MACHINE etc.) this
should now output a useful error message for skipped recipes.
Fixes [YOCTO #846], [YOCTO #1127]
(Bitbake rev: 6765218430e31c165888f26fbc75023c89a6eab2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rdepends-pkg field of the generated depend_tree model was not populated
in the original implementation of this method, this series adds in the
loop to populate the rdepends-pkg column of the model.
(Bitbake rev: 4f9a6f6f43cf2ef38115285897fbbde01964e892)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A list can contain the same value twice, therefore only append to the
appendlist for a recipe if the append file is not already in the list.
(Bitbake rev: d11f9dd33cdcc97a4a937e8bf7e97558d813cadd)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that we have a pristine copy of the variables available at launch time
we can use them when looking to inherit the OS's environment.
(Bitbake rev: 21c21fcc5871e81d8d497b6baed605cdd74c4571)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a data store in the cooker containing the values of the environment
from when BitBake is launched such that child processes can replicate
(and/or use values from) the host environment, rather than the cleaned up
environment that the main BitBake process uses.
(Bitbake rev: 54c7206165c0e7cfe5f7b243c80461baf5e7dfb1)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Too many people are using -b because they think it is the normal way of
specifying a target to be built, and then get confused when the build
fails due to a missing dependency; so show a warning about dependencies
not being handled when this option is used.
(Bitbake rev: c470f3f36aef24c46d9722593422286340be296b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since Hob only needes package dependency information, we can
create a new version of package information retrieving methods,
remove task dependency information, so that we can greatly
reduce data loading time for Hob
(Bitbake rev: df55199209ef042e5b1ca04c4df75c7d639b51eb)
Signed-off-by: Liping Ke <liping.ke@intel.com>
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The cooker methods which fire FooBarFound style events should only fire the
event when an item was actually found, rather than each time the method
is called.
Fixes [YOCTO #1219]
(Bitbake rev: 5c8eeefc79455f058dda8f04cf4c12dc5418e00f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the return result of "getCmdLineAction" to a dictionary
{'action', 'msg'} to allow the individual UI decide how to handle the
cmd line parsing result.
(Bitbake rev: 521909d1350a415d19516aa1710041e30950c7cc)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if a user adds a new .bbappend file to the system, the cache still
thinks the cached data is valid. This code fixes that to ensure additions and
changed in append application order are accounted for.
[YOCTO #1091]
(Bitbake rev: 54fe91fe96aaae47c40077c5f441c79da71da777)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch moves the logic of show_appends_with_no_recipes from bitbake-layers
into bitbake. By default, a fatal message is printed; we can also define a variable
BB_DANGLINGAPPENDS_WARNONLY to make the message only a warning(the variables
could be defined in conf/local.conf with a value "yes", "true" or "1").
(Bitbake rev: f5ba7c795df7cbd58124e35970ddc5bd84cbfb8e)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implement (optionally versioned) dependencies between layers, and if layer
priorities are not specified using BBFILE_PRIORITY_layername (now
optional) then work out the layer priority based on dependencies.
Define LAYERDEPENDS_layername in layer.conf to specify the dependencies
of a layer (list of layer names, split with spaces in the usual way);
LAYERVERSION_layername can be defined for each layer allowing specific
version dependencies to be specified via depname:version in the list of
dependencies. An error will be produced if any dependency is missing or
the version numbers do not match exactly (if specified).
Note: default priority if unspecified for a layer with no dependencies is
lowest defined priority + 1 (or 1 if no priorities are defined).
Addresses [YOCTO #790].
(Bitbake rev: 115b89fa279b64e79da0f72caf7b30965a83fab1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recipes that have been 'overlayed' (where there is a recipe in another
layer where that layer has a higher priority) are now listed within
cooker.overlayedlist for use in bitbake-layers. This is a dict with
keys of the topmost (highest priority) recipe file.
(Bitbake rev: 370fc603d79f9c34cc23b4b520b685256c23df5d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Useful if you want to load a configuration file that sets values which may
also be set in bitbake.conf or one of the files it includes.
(Bitbake rev: a8246ae5400c23df0d3ee29c36f4d9f257d1e6d1)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the caller doesn't specify a pkgs list we want to generate the tree of
all available packages. To do so use the new universe target list.
(Bitbake rev: 26b0c538ad4f677e0d45a66484c2dca073459282)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The generateTargetsTreeData() and generateDepTreeData() functions perform
are essentially the same function only creating slightly different data
structures. Instead of duplicating non-trivial code drop
generateTargetsTreeData and instead have an optional boolean argument which
defaults to False for generateDepTreeData() which has it include the extra
fields required for the targets tree.
(Bitbake rev: 3e38ea4e5748473740821b6e10c8477c08ab45e2)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This command can be used to search each BBPATH for files in the passed
directory which have a filename matching the supplied pattern.
This is implemented for use from the GUI (to determine the available
PACKAGE_CLASSES) but has been written so as to be generically useful and
reusable.
(Bitbake rev: 2a599812a57cb0b964880a6a2b7548423497ea92)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This takes the name of a .conf file and returns the full path to it
(Bitbake rev: 22c8600b885faf841795b872d82f68dfb644a26e)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Convert _findLayerConf(self) to _findConfigFile(self, configfile) so that
the core functionality of the method can be used elsewhere.
(Bitbake rev: c515b76c3a27d57d5ae8dddf15cc836811b24ee1)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modify the generateTargetsTree command to allow a list of packages to be
supplied by the caller, in this case we will only generate a target tree
for user requested targets rather than building a tree for the world list.
(Bitbake rev: d4e4f2ecae96e074b2ab3bb9882037af2e385fdd)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update exception handling syntax to use the modern style:
except ExcType as localvar
(Bitbake rev: dbf5f42b06bef81749b13aa99945cc1292a6676d)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add skiplist to cooker that allows access to the list of packages skipped
via SkipPackage (this includes COMPATIBLE_MACHINE, INCOMPATIBLE_LICENSE,
etc.) This can be used to enhance error reporting.
(From Poky rev: 6c12b7b1099c77b87d4431d55e949cf7c5f52ded)
(Bitbake rev: 7d2363f35350be27a33f568c23eb07fcd3d27e53)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At best it gave 1-2% improvement now, its 32 bit x86 only and isn't
supported after python 2.6.
PyPy is probably a better option now.
(Bitbake rev: 3c3bd0c2fa80d747f25401c17b785c7c2f3787ca)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ideally we'd avoid direct BBHandler usage, but honestly, to say the whole
bb.parse abstraction is incredibly leaky is an understatement. If we try to
make handle() not reparse classes, things get ugly fairly quickly, as
inherit() calls handle() itself after adding the class to the inherit cache.
This change fixes it so we no longer risk reparsing a class if:
- it's listed in INHERIT multiple times
- it's listed in INHERIT and is 'inherit'ed from a class in INHERIT
(Bitbake rev: 057c3cddeb72584c6c3908bd702288cece9b66ea)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If all our recipes were cached, there's no reason to fire off any parsing
progress events at all.
(Bitbake rev: e9e174e5781fc3de4dfd60d01228048a06a62b16)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now we use bb.exceptions to pass pickleable traceback entries to the UI, and
the UI is free to do whatever it wants to do with this information. By
default, the log formatter for the UIs formats it with bb.exceptions. This
also means that all exceptions should now show 3 lines of context and limit to
5 entries.
(Bitbake rev: ee48d628ee038bd72e1cd94aa75f5ccbacbcee4c)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note: we rely on the fact that better_compile has already output information
about the exception, so don't do it ourselves.
(Bitbake rev: caf21e9fbf3c526c1d7c555d8c76dca8710f9def)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Uses bb.exceptions to get a traceback back from the parsing thread to the main
thread, where it is then formatted. Also enables 3 lines of context for the
formatted traceback, and limits the number of entries displayed to 5.
(Bitbake rev: 8c33f50eb68411c071c001331e0134aeb776953b)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a standard format server class instance with method calls
for each step in the server setup. There should be enough hooks
for each of the different server types.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is to support extra cache. If user needs to request
extra cache fields besides CoreRecipeInfo fields, just add a new
XXXRecipeInfo class definition as Hob Does.
Currently supported Extra RecipeInfo name is an array. We can
support multiple extra cache fields at the same time besides
CoreRecipeInfo which is needed by all clients.
(Bitbake rev: 077657e50ad032c0fa876bf54e9802af2686e0fb)
Signed-off-by: Liping Ke <liping.ke@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using hob ui interface, we need extra cache fields.
We will save ui required extra cache fields into a separate
cache file. This patch introduce this caches_array parameter.
It will be used in the extra cache implementation (following patch).
Caches_array at least contains CoreRecipeInfo. If users need extra
cache fields support, such as 'hob', caches_array will contain
more relevant elements such as HobRecipeInfo.
(Bitbake rev: d50389ae692377c957afec7c846fc2ce2c070a09)
Signed-off-by: Liping Ke <liping.ke@intel.com>
If the priority of a layer has been specified with BBFILE_PRIORITY_ then
use that to sort the list of BBFILES entries, which will affect the order
in which .bbappend files are applied.
Fixes [YOCTO #1125]
(Bitbake rev: a8ab0af776ba20c83832215054180fbd15c274c0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current codeparser cache handling hurts performance badly even
over a couple of cores and certainly on many core systems, it can
spent huge amounts of time in the codeparser cache save functions.
This patch reworks the cache handling so that each parsing thread
saves out its own "differences" file compared to any existing core
cache and then the main bitbake thread picks these up and merges
things back together.
This was tested on systems with small and large numbers of cores
and was found to perform orders of magnitude better in all cases
despite the more complex code.
(Bitbake rev: 9f27563d66523f5af1028f173d53ee75e0877d46)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The files found by collect_bbfiles should be processed in order but due
to being processed using python's set(), the order was not being preserved.
Use a list instead as whilst the code is slightly more ugly, order
is preserved.
Addresses [YOCTO #1100]
Acked-by: Darren Hart <dvhart@linux.intel.com>
(Bitbake rev: c12dd868368bdc3a4f800e075a30c67edca28d47)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake -b core-image was showing no matches when it should list all targets
containing the fragment "core-image". This patch only calls os.path.abspath()
on things that look like paths and passed the path around more consistently to
various functions to get this use case working again.
(Bitbake rev: 6e9119c42d3f4cb3dab3d25856eee8b4bf4ad94f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Seeing warnings like:
WARNING: No bb files matched BBFILE_PATTERN_yocto '^/xxx/meta-yocto/'
are not encouraging to users and we shouldn't show these if we found
.bbappend files (but no .bb files). This change stops these warnings
from appearing.
(Bitbake rev: 48899fe7b3791dd897968f44c317e98bad14e146)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before this change, the codeparser cache was only being saved for the main
server process. This is suboptimal as it leaves code being re-evaluated at
task execution time and increases parse time.
We use the multiprocess Finalize() functionality to ensure each process
saves out its cache. We need to update the cache save function to be multiprocess
friendly with locking.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new universe target is not intended to be used for
compiling or building everything, it use is for sanity checking
and other tasks that need to find all targets. This does not
exclude any broken or virtual targets.
Signed-off-by: Saul Wold <sgw@linux.intel.com>
We need this if we want to run the buildWorldTargetList function more than
once, for example in a UI where we can change the MACHINE and DISTRO as much
as we like before triggering a build.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Add summary, license and group metadata to RecipeInfo and the cache.
Unfortunately this impacts parse speed but gives us a much richer set of
metadata to expose through UI's which can be accessed via the
generateTargetsTree command.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Move runqueua and taskdata initialisation into a new function,
prepareTreeData(), so that generateDepTreeData() and
generateTargetsTreeData() are not duplicating the same logic.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
The generateTargetsTree() command needs to return a model which includes more
metadata than the one generated by generateDepTree().
This patch adds a new method generateTargetsTreeData() to the cooker, based
on generateDepData(), and switches generateTargetsTree() to use it.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Some configuration variables (MACHINE, MACHINE-SDK and DISTRO) set which
confguration files bitbake should use.
The added command , findConfigFiles, enables a UI to query which files are
suitable values for a specified parameter.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Add a new command generateTargetsTree() which returns a dependency tree of
possible targets (tasks and recipes) as well as their dependency information.
Optional parameter 'klass' also ensures any recipes which inherit the
specified class path (i.e. 'classes/image.bbclass') are included in the model
Signed-off-by: Joshua Lock <josh@linux.intel.com>
When parsing if a SystemExit event is triggered, it causes the parsing thread to
exit and the main process hangs waiting for it to finish indefintely. Add code to
catch BaseExceptions and raise these with the main process gracefully instead
of just hanging indefinitely with zombie processes.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: bdd7813d8eecf7b6b636322e748ca6bf69118513)
Signed-off-by: Bob Foerster <robert@erafx.com>
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
- Moved the logic for comparing revisions from cooker into command
- Removed 'Cooker' from the event names
- Renamed the 'ExitCode' event into CommandExit, and changed CommandFailed to
be a subclass of CommandExit
(Bitbake rev: c51ed5d7a9971fad6019dac6c35a71b8a54ab16a)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Rather than updating the progress bar based on the recipe being processed
(whether cached or parsed), consider only parsed recipes. This reduces the
instability in progress rate introduced by the cached entries, and allows the
ETA to be resurrected and be a bit more useful.
(Bitbake rev: 618480f7739f6ae846f67a57bee5a78efb37839d)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Without explicitly joining the thread, it's possible for the process to end
(e.g. after a bitbake -p) and kill off the thread without waiting for it to
exit cleanly. So, register the thread join with atexit.
(Bitbake rev: 97ce57e6f860d3e6f34cc7a603ed1eeac4f423d3)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
This ensures that the time spent loading the cache from disk occurs with the
progress bar up. Though the progress bar stays at 0% during this period, I
think this is an improvement over the multi-second stall which occurred
previously before the progress bar came up. Ideally, we'd integrate cache
loading from disk into the progress display, but this is a first step.
(Bitbake rev: f6d0a5c219f9deb84f702450d30d868ba6271f77)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Previously, the cache was actually being loaded from disk twice whenever using
-b or -e -b. This also moves the bb_cache instance into the CookerParser, as
it's not needed by the cooker itself at all.
(Bitbake rev: dd0ec2f7b18e2a9ab06c499b775670516bd06ac8)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
This version uses a thread rather than a process, to avoid problems with
waitpid handling. This gives slightly less overall build time reduction than
the separate process for it did (this reduces a -c compile coreutils-native by
about 3 seconds, while the process reduced it by 7 seconds), however this time
is quite insignificant relative to a typical build.
The biggest issue with non-backgrounded syncing is the perceived delay before
work begins, and this resolves that without breaking anything, or so it seems.
(Bitbake rev: 5ab6c5c7b007b8c77c751582141afc07c183d672)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
This utilizes python's multiprocessing module. The default number of threads
to be used is the same as the number of available processor cores, however,
you can manually set this with the BB_NUMBER_PARSE_THREADS variable.
(Bitbake rev: c7b3ec819549e51e438d293969e205883fee725f)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
This class holds the particular pieces of information about a recipe which are
needed for runqueue to do its job.
By using it, I think we improve code clarity, reduce method sizes, reduce
overuse of primitive types, and prepare for parallel parsing. In addition,
this ditches the leaky abstraction whereby bb.cache attempted to hide the
difference between cached data and a full recipe parse. This was a remnant
from the way things used to be done, and the code using it had to know the
difference anyway. If we choose to reimplement caching of the full recipes,
we can do it in bb.parse, in a completely transparent way.
(Bitbake rev: 992cc252452221f5f23575e50eb67528b2838fdb)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
range() allocates an actual list when called. xrange() is just an iterator
and creates the next range item on demand. This provides a slight
performance increase.
In python 3, range will do what xrange does currently, but the upgrade will
be handled by the 2to3 tool.
(Bitbake rev: 73b40f06444cb877a5960b2aa66abf7dacbd88f0)
Signed-off-by: Bob Foerster <robert@erafx.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Use bb.utils.explode_deps to break up the rdepends and rrecommends strings.
This fixes the same issue which was fixed by a number of patches floating
around, but uses explode_deps rather than regular expressions.
(Bitbake rev: 83cdb23f8b89453a3527a276bd0b4deb85d63deb)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
This was inadvertantly removed when trying to reduce the amount of duplicated
information the user sees when a failure occurs.
(Bitbake rev: 850d6158ea9daa58e896fd6b258d586df797dcf4)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
- Queue up any events fired to the UI before the UI exists
- At exit, check if UIs exist, and if not, flush the queue of LogRecords to
the console directly.
- When establishing a connection from the UI to the server, flush the queue of
events to the queue in the server connection, so the UI will receive them
when it begins its event loop.
(Bitbake rev: 73488aeb317ed306f2ecf99cc9d3708526a5933c)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
- Drop EventException
- Use FuncFailed as the primary function failure exception, using TaskFailed
for the event (leaving it up to the process running exec_{func,task} to
display the more detailed information available in the exception).
- Switch InvalidTask to an exception rather than an event, as that's a
critical issue.
- Reduce the number of messages shown to the user when a task fails -- they
don't need to be told it fails 12 times. Work remains in this area though.
(Bitbake rev: 06b742aae2b8013cbb269cc30554cff89e3a5667)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
We use a custom Logger subclass for our loggers
This logger provides:
- 'debug' method which accepts a debug level
- 'plain' method which bypasses log formatting
- 'verbose' method which is more detail than info, but less than debug
(Bitbake rev: 3b2c1fe5ca56daebb24073a9dd45723d3efd2a8d)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Currently, anything whitelisted in the environment makes it into the worker
processes. This is undesireable and the worker environment should be as
clean as possible. This patch adapts bitbake sosme variables are loaded into
bitbake's datastore but not exported by default. Any variable can be exported
by setting its export flag.
Currently, this code only finalises the environment in he worker as doing so
in the server means variables are unavailable in the worker. If we switch
back to fork() calls instead of exec() this code will need revisting.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
idle command processing in each of the servers does not handle an explicit
None return value, which means the goggle UI ends up repeatedly adding
"Tasks Summary:" rows to the list.
This patch modifies BBCooker.buildTargets.buildTargetsIdle to return False
when BuildCompleted is fired, as is done in BBCooker.buildFile.buildFileIdle.
It may be that the correct way to fix this is to change the idle command
processing in the servers.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
For a given input to this code, the output doesn't change to implement a persistent
cache of the data to speed up parsing.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Likely cause is, of course, typo in the pattern or incorrect BBFILES, so we
should warn the user about this.
(Bitbake rev: b781317b5006bc047a59e7fa3c93344115e78ccb)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
time.strftime() defaults to using time.localtime(), use that instead
of spawning "sh -c 'date +<FMT>'"
(Bitbake rev: ec1f2773b4811b3beb52710120bb5a9b215c174e)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
See the comment in the code for details.
(Bitbake rev: 849dbd63244cbc4eaca0f1beedbb67baca024629)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
This way we can fully utilize bblayers, you can do everything in bblayers.conf
and avoid setting any environment variables at all.
(Bitbake rev: 5def1c8c31432968349f9b29d6333d7962260a8b)
Signed-off-by: Chris Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
When BBCLASSEXTEND is set, '-b' builds usually failed with messages
like
| ERROR: Parsing error data_fn virtual:native:<recipe>.bb and fn
<recipe>.bb don't match
|
| File ".../bb/providers.py", line 47, in sortPriorities
| priority = dataCache.bbfile_priority[f]
| KeyError: 'virtual:native:<recipe>.bb'
This patch fixes it and allows to specify the alternative class in a
way like
| ./bitbake -b virtual:native:<recipe>.bb
This patch was written to be so minimal as possible; variables should be
probably renamed to reflect their new meaning.
(Bitbake rev: f1c7fe9fc12161ceb3fe201cde370b929b208729)
Signed-off-by: Enrico Scholz <enrico.scholz@informatik.tu-chemnitz.de>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
In order to move the environment cleaning, which wants to log a
message, before cooker creation, the logging facility initialization
needs to happen earlier. So, it is now in init_logger in utils.py and
called from bitbake before the creation of the data object.
It also seems more correct to initialize a global facility like this
from a more global context than the creation of an object, of which
there could theoretically be many.
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
This prevents a misleading backtrace:
ERROR: no files to build.
Command execution failed: Traceback (most recent call last):
File ".../bitbake/build/lib/bb/command.py", line 83, in runAsyncCommand
self.cooker.updateCache()
File ".../bitbake/build/lib/bb/cooker.py", line 779, in updateCache
if not self.parser.parse_next():
File ".../bitbake/build/lib/bb/cooker.py", line 969, in parse_next
cooker.bb_cache.sync()
UnboundLocalError: local variable 'cooker' referenced before assignment
(Bitbake rev: 060ef3d957615b7eb1209dc0d01ebeb53f8c4edc)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Chris Larson <clarson@kergoth.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
dict objects provide an __iter__ method for the iteration which gives you the
keys, so calling keys directly is unnecessary, and isn't really a best
practice. The only time you really need to call the keys is if there's a
danger of the dict changing out from underneith you, either due to external
forces or due to modification of the iterable in the loop. Iterations over
os.environ are apparently subject to such changes, so they must continue to
use keys().
As an aside, also switches a couple spots to using sorted() rather than
creating a temporary list with keys() and sorting that.
(Bitbake rev: 5b6ccb16c6e71e23dac6920cd2df994d67c2587b)
Signed-off-by: Chris Larson <clarson@mvista.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* Make the test functionality work
* Optimise BBPATH handling when changing directory
* Optimise file globing for BBFILES
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Refactor the environment variable handling so that it more closes matches the
changes that have been made in bitbake-dev.
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@5527 311d38ba-8fff-0310-9ca6-ca027cbcb966
* File licence headers were sanitised causing most of the diff.
* cooker.py was created from bin/bitbake.
* cvs fetcher port option was added
* The -f force option was fixed to work correctly
* Multiple entries in rrecrdeps are now handled correctly
(allows adding do_deploy to image depends)
git-svn-id: https://svn.o-hand.com/repos/poky/trunk@1129 311d38ba-8fff-0310-9ca6-ca027cbcb966
Christopher Larson
Paul Eggleton
Richard Purdie
Lianhao Lu
Dongxiao Xu
Robert Yang
Joshua Lock
Liping Ke
Dexuan Cui
Scott Garman
Saul Wold
Richard Purdie
Bob Foerster
Bob Foerster
Bernhard Reutner-Fischer
Chris Larson
Enrico Scholz
Jeff Dike
Chris Larson
Robert Bradford
Richard Purdie
Marcin Juszkiewicz