I add an observer only mode for the knotty UI and
the XMLRPC server that will allow the UI to register
a callback with a server in order to receive events.
The observer-UI is able to send read-only commands to the
server, and also is able to register as an event handler.
Read-only commands are the commands that do not change
the state of the server and have been marked as such in
the command module.
The observer can switch to a full client if it calls addClient
at any time, and the server has no other client running.
(Bitbake rev: 4de9ee21f1fa4d04937cc7430fb1fc8b7a8f61e2)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added distroy signal to information dialogs
so that when pressing the close button,
the dialog would close.
[HOB #4568]
(Bitbake rev: 265e27857d1d8914486b924d3390bfbe88f4e39b)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After a recipe/package is deselected, the table is sorted as before the
fadeout animation.
[YOCTO #4453]
(Bitbake rev: d4968eac539f777367ab1243a1049117cb261176)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-applied a fade out mechanism for deselctiong on all the tabs of
recipes and packages list page
-set cursor on the package/recipe when it is included(important
when the its place is changing; like when the tree si order by
included tab)
[YOCTO #4342]
(Bitbake rev: 8bd0e0681a6a39c00accbfc0041ab248993f3877)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building up a set of actions for the server is tricky since we depend upon the
commandline but fall back to values from the datastore. We should be able to build
a datastore without a commandline and vice versa. Ultimately the UI should send
the commands to the server.
This patch amounts to code rearranging, moving the heavy lifting to the UI, though
a helper in the configuration option. This will need further cleanup/tweaking but
this should be the only update needed to the UIs. The code now queries the server
for any missing data should it need to.
This code allows various knowledge of configuration variables to move to the UI side
only, partcularly pkgs_to_build but also all the command specifiers. It should also
be possible to move cmd eventually, I'm just unsure if any callers call the commands
expecting this to default to something sane right now.
(Bitbake rev: 2dbbb1d51dafd4451fef8fe16f095bcd4b8f1177)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Contains a small fix to the builder.py code
(a missing "self" in a variable assignment).
With this changes, "hob" can run with the XMLRPC backend:
$ hob -t xmlrpc
(Bitbake rev: 3497478f803986af32099ddd124c47df8e89f6da)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After the image was build, update the image size in the packagelistpage.
[YOCTO #4388]
(Bitbake rev: 4d6d02e61b32d1d710c708774f08cc5e7764415d)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the "cancel" callback function for both recipes and packages
list page.
[YOCTO #4333]
(Bitbake rev: 05ebbaa2426716c6254c4a98872020d02d2944bd)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you search a string, there are 2 groups: recipes/packages starting
with that string, and the rest. These 2 groups are now sorted.
[YOCTO #4111]
(Bitbake rev: 8d2b2a1c97570d3c6b40727f1afa1db8c00882f9)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated information for "Additional free space" and
"Image basic size" to match the description in the
manual.
[HOB #4354]
[HOB #4355]
(Bitbake rev: d3eac3f104689137c071c91a343ca4558b9d9f17)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runCommand was returning 'error' but checking for 'err'
resulting in an exception.
(Bitbake rev: 263aa44ed47e0cb03e1a97e7ed4a50bd9f828c78)
Signed-off-by: Martin Donnelly <martin.donnelly@ge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-refine sorting functions for each column from recipe list page
and package list page
-sort correctly size column from packages list page
-set default sroting order and secondary sorting criteria
-make included on included recipes/packages no sortable
[YOCTO #2346 & #4194]
(Bitbake rev: 56822176e3d5e613654a46c983d2f979d7a9eebc)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- do not set the Images window to always display a scroll bar if it is not needed
[Yocto #4171]
(Bitbake rev: 970e2e6f079fa9a49646f86364eae9a4ee241f90)
Signed-off-by: Ioana Grigoropol <ioanax.grigoropol@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of a custom git proxy mechanism, Hob now
uses a SOCKS proxy in order to work with external
repos via the oe-git-proxy helper script.
Fixes [YOCTO #4187]
(Bitbake rev: 0b81a2c4a5611b64dbdd40131730a82c149b94a2)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Cristian Iorga <ubik3000@gmail.com>
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After moving the code from packageinfo.bbclass to
package.bbclass, minor adjustments were made to the
parsing of the package items.
(Bitbake rev: 414fe98fe367ba44ea0fd20d8fe1296bcef58ea6)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Giving focus to the search text field should not impact the table
sorting.
[YOCTO #4113]
(Bitbake rev: b5b4b6e4fefa6a164a49b291a0993b1ff63947f4)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the functionality which made an information
dialog pop up when including any package.
[HOB #4138]
(Bitbake rev: 6cabbb241ab3959b3c8f084423469c0bfc9899bd)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now, the search results stay until I clear the search field,
so that I can manipulate the search results.
[YOCTO #4112 & #4117]
(Bitbake rev: d880ce966ca825aa66a23755fcb47497fb3f26c3)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to have information for each package in hob,
a new item is added to the dictionary, represeting the
files that are brought in by each package.
(Bitbake rev: ffb8e32166d0ab690131e753f91592011c3f7ffb)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new column to the model and also populating
it with the information brought in from the
packageinfo.bbclass.
(Bitbake rev: afa78ae15be3e0babadd5d86092a2852135cfcce)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extended the packages page information with the
listing of the files brought in by every package.
(Bitbake rev: 42b1ce37b5c9a357108afdc01b0e9f008a84e6e3)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Hob #4070]
- tweaked the spacing on info windows
- fixed text bolding in simple settings dialog
(Bitbake rev: 2ecb102968cdbbdbbfa91e1dcccf45bcd0b59a89)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented the search functionality for recipes and packages using
filters on the listmodel. I have used the design which can be found in
bugzilla.
[YOCTO #3529]
(Bitbake rev: b77166ad7b8571895f73a84f7789d93fbd4f6d04)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For a custom image from scratch, the image version is not set and
it gives an error.
[YOCTO #4065]
(Bitbake rev: 43703f3eb5f71a117e6315fa5df91711653636a3)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some settings in Hob were not saved in Bitbake and they were not displayed
correcty in Hob, because Hob used some other variables with the extension "_HOB".
I have removed this, in order to have a consistency for the variables.
ALso, I called a function to load the extra variables saved in .hob/template_default.hob.
[YOCTO #3957]
(Bitbake rev: 0f62a12ef3fa4daf8f3a289c984115302b75c23d)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
" tabs and passing the information needed to the function created
in the builder.
(Bitbake rev: 60c3b561d66f9a43e696c402899141287ddb496e)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
and passing the information needed to the function created in the builder.
(Bitbake rev: 840bbdbc973e72d4305c21bcc26c008a6dc39456)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in the information dialogs.
(Bitbake rev: 0301e7622af83c105ba60d7d1749294de06f6a59)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in order to display all the information gathered in the
backend, new columns needed to be added in the hoblistmodel.
(Bitbake rev: 0942f05a1196513c6d163f28cf297728aed6ee22)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added information so that it would display correctly in the information dialogs.
(Bitbake rev: bf86cc183c250acd0e52755ae6050a2f8d85ccf5)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this covers functionality for : recipe selection page
package selection page
information dialogs
(Bitbake rev: 82cb844c92fcc71cefe7d7ddc110523c62185e9e)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added information so that it would display
correctly in the information dialogs.
(Bitbake rev: 7580716b905366aea70c9eed38dc703cecf24219)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
replaced in the builder.py the function that displayed the tooltips
with two functions that display property windows for recipes and packages
pages.
(Bitbake rev: bec3c1dc91118705149d00e5ec2bea08c8db75ed)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Hob templates functionality, in its current incarnation,
is confusing and has no clear utility.
[YOCTO #3696]
(Bitbake rev: 4eb3b6bb9f936808ddf085624078f6479c522c48)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an error:
ERROR: No new tasks can be excuted since the disk space monitor action
is "STOPTASKS"!
ERROR: Unknown event: <bb.event.DiskFull object at 0x2ab6310>
This is because we don't handle the event bb.event.DiskFull in
knotty.py, we don't want the knotty to do anything here since we have
done everything in monitordisk.py, so just ignore this event would fix
the problem.
[YOCTO #3523]
(Bitbake rev: 0fa874dbe0532bbe88ade405f514a237e6cd2488)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the machine is changed, the warnings list is emptied and the warnings
bar is hidden.
[YOCTO #3830]
(Bitbake rev: 8e43da7798a98988f7da3f7c424e8f9e5eac2010)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob was hanging when the user tried a rebuild a new image, because
of sanity checks. It should not re-run sanity checks.
[YOCTO #3829]
(Bitbake rev: f7ff550f53cf3e5b166940db83f27ec733f3ef72)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I've sent a patch to poky, with some changes in sanity.bbclass. When bblayers.conf
is updated, it updates also a variable to know when to reparse configuration files.
This patch contains the changes to reparse conf files, after a sanity check which
changes bblayers.conf.
[YOCTO #3213]
(Bitbake rev: 966e3e59ceb1c8b33b5881f291c148ea6513eda0)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have agreed to change how we show the packages. Now they are not grouped by
recipe. Until now, it was implemented using TreeStore and I've changed it to
extend a ListStore. I have modified all the function in according to this.
[YOCTO #2180]
(Bitbake rev: 311e7ba8b2c88fbf6f16b6ffb1400226b155ddd4)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After some discussions about the design of the Shared State Settings tab in Hob,
we have decided that using a GtkTreeView to present and configure the sstate
mirrors is probably the best solution.
[YOCTO #3569]
(Bitbake rev: 2ff636910b9cf3099e8d961f4bbe71512c015ecc)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set the labels selectable; reset the warnings list when another machine is selected;
changed a label name
[YOCTO #3215]
(Bitbake rev: a4463d7b51828c32e55dea3c0dd51966d387abac)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new command in bitbake to save a variable in a file; added a function
in cooker which is called by this command.
Added new command in bitbake to enable/disable data tracking.
The function saveConfigurationVar from cooker.py saves a variable in the file that
is received by argument. It checks all the operations made on that variable, using the history.
If it's the first time when it does some changes on a variable,it comments the lines where
an operation is made on it, and it sets it in a line to the end of file. If it's not
the first time(it has a comment before), it replaces the line.
Made some changes in hob to save the variables from bblayers.conf and local.conf
using the bitbake command.
[YOCTO #2934]
(Bitbake rev: 55b814ccfa413d461d12956896364ab63eed70a8)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If .hob exists, hob takes the variable from there. Change to not override anymore
the variables which comes from bblayers.conf and local.conf
[YOCTO #2934]
(Bitbake rev: 00533e83038e3d5e3cd5d1be73c45afece92ec0c)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'select a base image' option is no longer displayed once
an image is selected
[YOCTO #3671]
(Bitbake rev: 27f2247b4c227c3b5adb1ca33d0cd7f7b492e170)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-now Hob catches the warnings generated during parsing, and after the parsing
is completed, if there are any warnings, it shows a bar that contains a message
with how many warnings has encountered, and a button "View warnings"
-when "View warnings" button is clicked, Hob shows a dialog with the warnings;
if there more than 1 warning, you can use "Previous" and "Next" button to see them
[YOCTO #3215]
(Bitbake rev: d7b5311d35b3974398fecabfb5ecf1effa85c27e)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-the first implementation for this bug used a progress bar, that is shown
during open file process; it revelead that the progress bar stops earlier
-now I have implemented using gtk.show_uri() method, that shows itself a
busy cursor when it opens a file;
-deleted the code for the first implementation
[YOCTO #2997]
(Bitbake rev: 09d1c4c2db124104b9da460547b20a2c2ff07bb3)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the error message the user sees if the versions are incorrect.
[YOCTO #3637]
(Bitbake rev: 7e3a99949358f4362876df5a82f8aeaae72c3c97)
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since hig.py was becoming too large (which impacted maintenance and
operations like git merges) it was split into individual files for
the classes that were implemented in hig.py. hig is now a Python
package (lib/bb/ui/crumbs/hig/). The patch was tested by
building core-image-basic/qemux86 in Hob and accessing the various
UI elements implemented in hig. Note that the patch does not change
the functionality of Hob in any way, it's just a code refactoring
that should make life a bit easier for Hob developers.
[YOCTO #3200]
(Bitbake rev: a7a2b730f915cafe7aa30539622dd1ca64ae41f5)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As it is, when you create a new image from scratch, hob gives an error.
This is because of the patch for #2601.
(Bitbake rev: 42d9db0cc80ed45d769f843ccb51e0c194ec557b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Till now, a custom image made in Hob was using only the packages from
the base image. Now it is using everything declared in the base image.
Also next to hob-image.bb, it creates another .bb file which is used
in building process. Those images are ignored by git.
[YOCTO #2601]
(Bitbake rev: 22007cf71a00fbb03b40f97201a6eb06c9aebd16)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change to use bb.error instead of print, or maybe that was desired (?)
Also remove a tab, while in the neighborhood.
(Bitbake rev: 4a36a1af71530afc8fa896271fa94362ead176bd)
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a race where the registerEventHandler() server call may happen in
a different thread to the main UI, causing the main UI to see
httplib.CannotSendRequest exceptions.
This moves the call into the main thread, removing the init race and fixing
errors I was seeing with the xmlrpc backend.
(Bitbake rev: 14cdd3b351d1ab23cb3ea5f853e403a53e67ac1c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- there are some layers which cannot be removed; so ,I have used
a new variable called BBLAYERS_NON_REMOVABLE located in bblayers.conf,
which contains those layers which cannot be deleted
- "meta-hob" layer is added to this variable in hob code, like it's
added to BBLAYERS var
[YOCTO #3176]
(Bitbake rev: 05da1621eed4c6201cd65372d229f63ea8a44b6e)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using curses initscr/endwin causes screen corruption if for example you
suspend bitbake and resume it. This changes the code to use a less
invasive approach to determining colour availability on the terminal.
(Bitbake rev: 4548a8f037eaf8d47a77052acc3e9ec264ac41e0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Run the sanity check only once
[YOCTO #3377]
(Bitbake rev: 0db80d57d4d2b1bb97375444c439827450ff33d1)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-to enable this in hob, first you have to enable this in bitbake using
BB_DISKMON_DIRS and/or BB_DISKMON_WARNINTERVAL vars
-created "restart the build" action on the build_fail_top_bar
[YOCTO #3357]
(Bitbake rev: 964ac25d153ff4da144963289a32066db0e28b89)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add bold color output to log level name and standard color output to log msg
when bitbake is run from an iteractive console. Color output is only
enabled
if the terminal supports color.
Used Jason Wessel's recommendation for transparency on verbose, note and
plain.
(Bitbake rev: 2734240da2cc150f811129a6adf6eb4b2161b204)
Signed-off-by: Seth Bollinger <seth.boll@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Any issues encountered during the build (fatal or not) is displayed
in the Issues tab, and the total number of issues is changed.
[YOCTO #3376]
(Bitbake rev: 64c662ab7f09c2e867445e8ba21ea63ae014d45b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The duplicated import could result in an UnboundLocalError.
(Bitbake rev: a098cebd5c33ebd704efd35d9e655262283cbe1f)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-after pressing "build image" button, hob was freezing because it didn't
receive well the log file
[YOCTO #3398]
(Bitbake rev: e3619e34d43c3f7725fc83c362d8cbd07e153ebe)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, command.py can return an error message from runCommand, due to
being unable to run the command, yet few of our UIs (just hob) can handle it
today. This can result in seeing a TypeError with traceback in certain rare
circumstances.
To resolve this, we need a clean way to get errors back from runCommand,
without having to isinstance() the return value. This implements such a thing
by making runCommand also return an error (or None if no error occurred).
As runCommand now has a method of returning errors, we can also alter the
getCmdLineAction bits such that the returned value is just the action, not an
additional message. If a sync command wants to return an error, it raises
CommandError(message), and the message will be passed to the caller
appropriately.
Example Usage:
result, error = server.runCommand(...)
if error:
log.error('Unable to run command: %s' % error)
return 1
(Bitbake rev: 717831b8315cb3904d9b590e633000bc897e8fb6)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-small changes to the text of the progress bar when parsing recipes
[YOCTO #3282]
(Bitbake rev: 90c0dfc39c3ce13e53c7c91168dc3401f7df476b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its a minor correctness detail but the update flag should be set
when Start events are encountered.
(Bitbake rev: 96683ed68e11672ff22fb4a291d2628676c136f0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was an issue where the last tasks run by bitbake would not
correctly get displayed in the knotty footer. This was due to the
total count including active tasks. This change ensures the footer
is displayed if the are any running tasks.
(Bitbake rev: d787e4efc106589811651bc18ca48d5223443b95)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-since the order of the layers can potentially impact
the build outcome, users should be able to reorder
the layers within the layers dialog;
-used TreeView Drag and Drop
[YOCTO #3270]
(Bitbake rev: 2bd9a00facb90f7d76a9bdaa86ca765fb2159e71)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
User introduced proxy settings were not saved
when a proxy details input dialog was opened.
The proxy settings were lost upon return, and
restored from the previously stored one.
Also:
Code cleanup:
details_cb() function duplicate definition
removed
Fixes [YOCTO #3240]
(Bitbake rev: aa64b2e472f8a9713e3dc25647aa2cae474e2622)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- indicating on progress bar that hob has gone from parsing
recipes to "Generating dependency tree"; this will provide
some visibility of what has caused the "stop" button state
to change
[YOCTO #3282]
(Bitbake rev: d964d04ff1f59a590bd3ab5430517d79e92536d0)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- created a new file named "hobthreads.py", defining a thread
for opening the log file in a subprocess using subprocess module;
in the future I think we will add some other threads here, to
implement some other performance issues
- on "builddetailspage", "packageselectionpage" and "imagedetailspage"
I have changed the manner for opening the log file; it uses the thread
to open the file, and on main thread it creates a dialog to show a
progress bar, which pulses till the file is open
- this was added because when the log file is big, it takes time to
be opened; on the dialog you can use "Cancel" button to terminate the
process initiated to open the file
[YOCTO #2997]
(Bitbake rev: 165362a63f085991b6bab63ab90a0c7b9bf6b784)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Image selection is not properly initialized to none,
and it used before having a chance to have a value.
Due to dynamic nature of Python, variable is used before
it exists, in this case. This causes a crash.
Bug introduced during the fix of [YOCTO #3228]
Fixes [YOCTO #3334]
(Bitbake rev: 1c540541c5397c38dca880a79df9ebfcda576d4c)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- added a scroll bar in the shared state tab from settings
- added a signal on it, so when you add a new mirror, it will
auto-scroll to the end of the list
[YOCTO #3229]
(Bitbake rev: 00afd6a25c0cc0a4fcddd9f7c26a17ef6c47cbd2)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Image selection is remembered correctly even after
advanced settings have been changed.
Selected image was reset even when it was not the case.
Fixes [YOCTO #3228]
(Bitbake rev: 93fb0a2c56100b2bbc8769af9ae2343c05e72193)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- when you do a build you should see "Log" page, not
"Build configuration" page
[YOCTO #2569]
(Bitbake rev: 431cb80d4d5222f832f6141b8578291f2f14a131)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-when the recipe parsing process is stopped, the progress bar shows
"Stopping recipe parsing"
[YOCTO #3259]
(Bitbake rev: d20626bd717bb8f5cfd73b91337af880198db247)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In "Edit Recipes" and "Edit packages" pages, the "Brought in by"
column is displayed correctly, with the right number of additional
packages and a proper title.
Fixes [YOCTO #2195].
(Bitbake rev: 4d1d3e5a54eb718e2eee02f734d929f15ccf99ce)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added a method in progressbar.py that doesn't update the
percentage in the progress bar shown in hob.
the call of the method is done in builder.py.
(Bitbake rev: 7ab5775fceda1055b86bdc3313fc4bf928bf5155)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-when returned to the Image configuration page, after canceling on the
Recipe selection page, the image selected previously is now shown corectly
[YOCTO #3205}
(Bitbake rev: 0a755026661a18ae386eb64b807e9e9e8f0dfe4c)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
size_str = '%.1f' % (size*1.0/(1024*1024)) + ' MB'
from /bitbake/lib/bb/ui/crumbs/hobpages.py file transformed
the size in MB. In our file it was again multiplied by 1024
instead of doing a division by 1024, which brought a faulty size on
the edit packages screen.
(Bitbake rev: 7dcea3884a45973ae332695dc8a53814b701151f)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch allows the user to check the network connectivity in
the "Proxy" page ("Settings" dialog) by adding a button which provides
this functionality. It also disables retrigerring sanity checks if the
proxy values are changed, since now the proxy checks are explicit.
Note that this patch depends on a patch in oe-core
("sanity.bbclass: trigger network tests explicitly"). It will
not work properly if the patch in oe-core is not merged.
[YOCTO #3026]
(Bitbake rev: cb1354d29c0be27aee57b9783c724457ef6725fb)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change also applies to task-core-standalone-sdk-target-dbg and resolves
build failures caused by the missing packages.
(Bitbake rev: 4cd0200e96fb282980a945b80af641a6e022e0b4)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- throw a Hob exception if runCommand returns 'Busy' or
'No such command'
[YOCTO #1245]
(Bitbake rev: 5a8e3baa66f845599a616f080a7efce81ecda631)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- qemu images cannot be deployed to hardware, even if live
images (hddimg and iso) files are created
[YOCTO #3196]
(Bitbake rev: 001b1c439ffa450cb8728b0fa9469fed63ae9bed)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- when displaying image details, even if the kernel information is not shown, the kernel value must be set (if dealing with qemu) otherwise running the image will throw an error
(Bitbake rev: 334125a98ecb8a938aee4bc530205ad75099361c)
Signed-off-by: Ioana Grigoropol <ioanax.grigoropol@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- the title label is destroyed at page switching (that's why we need
to generate it every time)
[YOCTO #3195]
(Bitbake rev: d6d991c08f66cf9ab27c53075109212ea9129380)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scrollbars have now an automatic behavior, depending on
the error's text size and error window size.
Fixes [YOCTO #2983]
(Bitbake rev: 0c0a25672498520fb2c46164f08959dda83c61e0)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Replace some labels in the "Build environment" tab
2. 'defaultsetup' changed to 'Default' in the "Image types" tab
3. Fixed the moving icon in the "Output" tab
For more details: https://bugzilla.yoctoproject.org/show_bug.cgi?id=2162
[Yocto #2162]
(Bitbake rev: db7d98569117b7a75262eb555e1c7ae9a421bdf8)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- the 'User selected' tag is only used when the user
selects a package
- fix hob to remember which packages are 'User selected'
- if the package is already brought in by some other package,
it should not appear as 'User selected'
[YOCTO #3108]
(Bitbake rev: 2391e9ba7034d4f90bafa5732d8efa8166f69950)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-the tab shows an empty mirror row when no mirror is configured
-able to delete the mirror row even if it's not empty(if it's not
the first mirror)
[YOCTO #3189]
(Bitbake rev: d6472608112b8af2e98f247e6f89a7f948b2d020)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes the bad merge of #2162 fixes on master.
(Bitbake rev: 5b84d88f2a47063197f9a20f8ebf0a7ccf22c2eb)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For long errors (bigger than 200 letters),
the text box is scrollable and resizable
and text is selectable.
Additionaly, all message dialogs are modal.
Otherwise, a user could still interact with hob
even in an error case, leading to potential problems.
See design details in related bugs.
Fixes [YOCTO #2960], [YOCTO #2983]
(Bitbake rev: be8bf02f2b347edf5514cafc6cb6a44f71118736)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a build fails, there should not be a back button on the screen.
All available actions are provided within the failure notification,
so no back button is needed.
[YOCTO #3104]
(Bitbake rev: 03f978d21c7bfbf5f1afc741a43766030f2882a8)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The console can appear to hang when no tasks are executing even if bitbake
is iterating through a large number of tasks behind the scenes.
This patch tweaks the footer code to display a status even when no tasks
are active to give the user better feedback about what is happening.
(Bitbake rev: 0a950ee14fce3a0cb938c22d7c717dc93ce6e25f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The entire interface isn't usable whilst the progress dialog is up so we might
as well set the modal flag so that some WMs (such as GNOME 3) can do nice things
with the dialog (such as pin it to the titlebar).
(Bitbake rev: 9a19fe8e8c65b75dbbb4ae5401df6d6838495bdd)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new tab to show correctly SSTATE_MIRRORS variable. Now you can add new
mirrors or delete mirror. "info" image was also changed( it is smaller, so it
can be next to labels).
>From "Build environment" tab, SSTATE_DIR and SSTATE_MIRRORS vars were removed.
[YOCTO #2893]
(Bitbake rev: ae27a7cf4d31a1b99840a761a27fd6256cb1dd9b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- use the progress bar text to indicate the stopping status
- the text should say: 'Stopping the build...'
[YOCTO #3152]
(Bitbake rev: 6f59db920ca4f527606670969c79afbf34eaff81)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Move the "Others" tab from advanced settings to simple settings
2. Organize content of tabs into headings
3. Match various labels in the settings with the design
4. Clean up config_md5 in both simple and advanced settings
This patch implements a part of the changes requested by Belen in the settings dialogs.
The second version of the patch addresses all the UI changes requested by Belen (more
details are in the bug description): alphabetical ordering of the image types and
warnings if no image type is selected.
[YOCTO #2162]
(Bitbake rev: b45438555ecf2e25ebb99324a18d31c812a2738a)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds a sanity check progress screen to hob. The screen
is displayed when Hob executes the sanity check procedure. The screen
is displayed for at least 5 seconds. If a network error is detected,
a special dialog is displayed which lets the user open the proxy
configuration page directly.
Note that currently bitbake triggers the network tests only when
the value of its TMPDIR variable changes, which happens fairly rare
on my system. This is the subject of another bug (#3026).
Version 2 of the patch splits the changes in two parts (sanity.bbclass
belongs to oe-core).
[YOCTO #3025]
(Bitbake rev: b48f1351271cc066ffe919db112b14834a6d8f8f)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a user makes a build from a tarball, it shows fatal error in branch field.
Now it not complains as a fatal error. It is a normal message.
[YOCTO #3114]
(Bitbake rev: 53d5d542cd0197ca67c5f90a57808af2f19ff56d)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- removed all set_size_request calls for buttons in order to:
- force autosizing of buttons with regard to the text length
- use host theme default height for buttons
- modified buttons on image details page to have the same height (default host one) and the width of the button with the largest text
- modified Stop button on build details page to have the default height by directly attaching it to the containing table instead of hbox
(Bitbake rev: 9cdfaa17309d368c3bbae0f1cce0ad875d340e83)
Signed-off-by: Ioana Grigoropol <ioanax.grigoropol@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new tab to show correctly SSTATE_MIRRORS variable. Now you can add new
mirrors or delete mirror. "info" image was also changed( it is smaller, so it
can be next to labels).
>From "Build environment" tab, SSTATE_DIR and SSTATE_MIRRORS vars were removed.
[YOCTO #2893]
(Bitbake rev: 1a81e27365d969e4ad4b4f0aec290aa967a8a35f)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you stop a build, a "Build stopped" message appears. I have changed 2 tooltips and
also eliminate the alert that comes up when you click 'Edit packages'.
[YOCTO #3160]
(Bitbake rev: f5a21da2faf7ede56cf211b96dffd8aaa4b485b8)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LogExecTTY even is intended to provide the ability to spawn a task
on a the controlling tty, if a tty is availble. When a controlling
tty is not availble the previous behavior is preserved where a warning
is issued about the action an end user must execute.
All the available UI's were tested against the new event type.
This feature is primarily intended for hooking up a screen client
session automatically on the controlling tty to allow for a more
streamlined end user experience when using a pure command line driven
environment. The changes that send the LogExecTTY event are in the
oe-core side.
(Bitbake rev: cffe80d82a46aaf52ff4a7b6409435754043553f)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following traceback appears when running the following command after the
devshell is exited.
bitbake -u goggle -c devshell busybox
-- traceback --
Traceback (most recent call last):
File "/work/bitbake/lib/bb/ui/goggle.py", line 35, in event_handle_idle_func
build.handle_event (event, pbar)
File "/work/bitbake/lib/bb/ui/crumbs/runningbuild.py", line 299, in handle_event
pbar.set_text(event.msg)
AttributeError: 'ProgressBar' object has no attribute 'set_text'
(Bitbake rev: a6cc53cdb3c34fc8fd01bbc5ce0008429dc6785c)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
You can't use markup characters (e.g '<' or '>') in the labels for many
widgets - you must use the appropriate entities instead.
(Bitbake rev: 54a16ac999d4a2c4c3f8a4531e8c6fabc39a4147)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is not necessary for modern applications - instead we just need to
check if we're in the middle of a build and if so, do the same thing as
pressing the "Stop" button.
(Bitbake rev: a79eb5d918239db1dade8134743e6142a4854930)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow specifying HOB_MACHINE in local.conf to set the initially
selected machine. With this set, Hob will select the specified machine
and then jump straight into parsing recipes. If you do wish to change
the selected machine with HOB_MACHINE set you still can - you just need
to stop the parsing process first.
Fixes [YOCTO #3148].
(Bitbake rev: c3b623dc7d546a1ededdb532dcbcba4a6230bc65)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During building we already report errors in a special tab and
indicate when the build has failed; bringing up a dialog was a
regression introduced in bitbake revision
5bab81b124087d63d6eb62a861e1241714fcd483.
Fixes [YOCTO #3151].
(Bitbake rev: cf0a67d62f631aa48d1afc3fbdd0f73995b1c401)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- If you arrive to the packages screen from the recipes screen, the title
should say: 'Step 2 of 2: Edit packages'
- If you arrive to the packages screen from the image details screen, the
title should say: 'Edit packages'
- The title of the recipes screen should say 'Step 1 of 2: Edit recipes'
[YOCTO #2982]
(Bitbake rev: c366f4314c29b873a486daa9a0a4e29bb4225dd6)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a build was stopped, it wasn't obvious what to do next.
Now, on the page it appers a top bar with 3 buttons: "edit image",
"open log", "build new image"
[YOCTO #2537]
(Bitbake rev: a6afd15b7a40919313e26777b514ae44b587a0f6)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Once package building completes, you can customise the list of
packages that will go into the final image. Once you have made
the changes you need, you can either build your image, or you
can exit the process and go back to the 'Image configuration'
screen by selecting 'Cancel'.
[YOCTO #3105]
(Bitbake rev: c5fd1824c9794923576ec1e747536c0430542fd1)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If an event handler failed we were not recieving an error message -
parsing just "froze" at 99%. This is because we were expecting a
CommandFailure event and this never happened in the case of
RequestPackageInfo which is where the failure was occurring.
This also required tweaking the error formatting slightly, taking the
return value of the format function rather than the message property
since the latter only seems to contain the first line without the
traceback in the case of event handler failure. Other error cases were
tested and their message formatting is unaffected by this change.
Final part of the fix for [YOCTO #2651].
(Bitbake rev: 5bab81b124087d63d6eb62a861e1241714fcd483)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "distro" combobox was moved to advanced settings, but it
was also present in simple settings. This patch removed it
from simple settings.
(Bitbake rev: 6d56bec4464da14d7fde0e60946be43293ad6e52)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix some issues with the settings dialog that were introduced as
a result of merging the fix for #2162.
[YOCTO #3117]
(Bitbake rev: a363f59579e01cb7bd39be2ce73f22c875c62ce7)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename all the 'View log' buttons to 'Open log' for
consistency.
[YOCTO #3045]
(Bitbake rev: 7bc9b0c1c2544b494959b13ac79ac3e52edb4fe3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Error messages that use arguments need to be formatted properly, or we
don't get the full message. Use a formatter to do this when an error
occurs.
Partial fix for [YOCTO #2983].
(Bitbake rev: 6783538884adecd914909a9ab4ca73c27575f3ad)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sort the list of base images to make it easier to find a specific image
in the list. Note that "Create your own image" still remains the last
item in the list.
(Bitbake rev: db16f575a774de7d9d44b4bc727b252de5d0f34d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We cannot reorder this list - it must stay in the order shown in the
dialog (which may in future be configurable by the user).
Fixes [YOCTO #2649].
(Bitbake rev: eca0352195d2d8ae8ef15baab9737884ec674a46)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This changes the filtering to use the inheritance of
packagegroup.bbclass to determine if a recipe is a package group.
Also makes the tab tooltip text generic; these recipes could come from
any enabled layer, not just the default ones.
(Bitbake rev: a3bf87a90198bf6127663c27d8be086dab04aaf9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our poor implementation of markup escaping was causing invalid
markup, leading to the error dialog being blank. Use the glib markup
escaping function provided by PyGTK+ to do this properly and avoid the
blank error dialogs.
Partial fix for [YOCTO #2983].
(Bitbake rev: 563ea5233a5ab1629c51e802d04280692f96c596)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of these values may or may not be overridden on a per-package
basis, so handle them accordingly.
(Bitbake rev: 56cee6a958843b03c5389d4a45245a04d1e03327)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When or_label was removed, I forgot to remove also the references to it.
[YOCTO #3010]
(Bitbake rev: 4d208aaedd60f79a4277f501fdbf8c2afc32c250)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If DISPLAY wasn't set, launching hob has printed a traceback
difficult to understand. Now, the exception is caught and it
shows a human message.
[YOCTO #2596]
(Bitbake rev: a41098a2dacbd903422ccdcd1885b0f351c7ddf3)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
changed the order of task tables,
cancel the 'description' column,
add the binb total number indicator, and so on
[YOCTO 2195]
(Bitbake rev: 6dc3263d60a6d35f9eebfcdbc2665201ee40b953)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toolchain was not saved in the settings dialog ("Output" tab).
[YOCTO #2695]
(Bitbake rev: f8924b75d6ff7f093d73f4e3c0953e349960d5ff)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-changed the text shown by both dialogs text
-make small tweaks to alignment
[YOCTO #2999]
(Bitbake rev: b193db13472908b8ec6c670da96ff3b0004e635b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now, "Your image is ready" icon doesn't appear when you come back on Imagedetails
page. It appears only after the image was generated.
[YOCTO #2984]
(Bitbake rev: de29bfc163471e4959483493a5e5b26f8a2cf8a0)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- All buttons in the interface inherit a BaseHobButton that
use the gtk settings for buttons from the host;
- Removed 'or' label between actions on image details page
[Yocto #3011]
(Bitbake rev: 1a8356b57f906cf575612eb52fc8d3a9824ff9a7)
Signed-off-by: Ioana Grigoropol <ioanax.grigoropol@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Back" button placed on RecipeSelectionPage and PackageSelectionPage
was changed to "Cancel" button to avoid any confusion.
Also, it was placed next to the other buttons on the page.
[YOCTO #3012]
(Bitbake rev: 1785b49a1b0b9698851d6e8aea94d1d2aa22c445)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The image configuration screen should have only one primary action.
"Edit image" button has now secondary action, and also I have removed
"or" label.
[YOCTO #3010]
(Bitbake rev: f54191dac18b4e1100944cc6da86705c1e9c1683)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the 'Included' tab: "The packages currently included for your image"
For the 'All packages' tab: "All packages that have been built"
For the 'Search' field: "Enter a package name to find it"
[YOCTO #2322]
(Bitbake rev: 0828f352419127fb30dc4eb5f91feba84ea59202)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Back" button from "Packageselection" page now restores correctly previously
selected packages list. Till now "Back" button was implemented just to switch
pages, not to cancel changes you have made to packages list.
[YOCTO #2984]
(Bitbake rev: 1ad03d6a327eb3389f7b4d0d74d2e8ae8b50c3b6)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because class hcc is useless, remove it.
(Bitbake rev: 08d4a0f76542e05755c298b3875ea373e5512e13)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Yocto #2795]
When a new image type added, the hob will crash because the new type is
not in the hard-coded image dictionary.
For most of the image types, they are same with the image file's
extension name. So use variable "IMAGE_EXTENSION_difftype" to map the
image type which is diff with the image file extension name, such as
type "live". And the variable(s) will be set in image_types.bbclass.
(Bitbake rev: e7c84f056af9c613920d5adcd078a011e0387193)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On some SuSE systems, the curses python module is not installed by default.
Instead of a python failure, we want a nicer error message.
(On SuSE systems the package is typically python-curses.)
(Bitbake rev: 65a5845ac942d0aa6838c295e41b656f9d2a98bb)
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Reword commit message, rebase to latest bitbake.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob is now more context-sensitive regarding
user changes/options. Also, the workflow have been
streamlined and resembles more of a wizard.
Beautified some hardcoded values.
Fixed typo.
New streamlined Image Configuration page.
Build and/or Edit image buttons presence
is context sensitive.
Recipes and packages tabs selected automatically
based on custom image or pre-defined target image
(included or all).
Context sensitive Back button.
Fixes [YOCTO 2165]
(Bitbake rev: b48cd7dcf57b1abc8c5b46ced11d4f57bf06e557)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default value of BB_CONSOLELOG in OE-Core now points to a directory
that might not exist prior to the first build, so ensure it is created
first.
(Bitbake rev: 660821769b9dfb89086291ffc835e9b5444509be)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no good reason knotty2 shouldn't be the default now. If you need
the old behaviour, just pipe the output through cat as non-interactive
terminals get the old output.
(Bitbake rev: b97d50618b2187bcfd7d25f64d1444482ca62ef7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Long lines of text which wrapped on the terminal corrupted the output shown by
knotty2. This patch catches such errors by becomming aware of the terminal size.
It also catches terminal window size change events and adapting to those
changes using a signal handler.
Based on a patch from Jason Wessel with several tweaks and enhancements
such as use of chained signal handlers and covering all output messages.
(Bitbake rev: 9afc9e4d14abec5ac326851d4bb689c1e8d45a43)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids task (0 of 0) type messages being displayed during setscene by knotty2.
(Bitbake rev: 53efa01720a61da2cb344cbb7e977baa28deba3b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As ui design 'build-fail-spec.pdf' to change the GUI
[YOCTO #2183]
(Bitbake rev: f9b81e44b2e71b4de6729bd2c69b25fd619b5fed)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If users build images in Hob, record logs and allow users to retrieve the lo
after successful build.
The logs are generated if and only if:
- users do "just bake"
- users do "build image" after "build packages"
- users do "build packages" only
[YOCTO #1991]
(Bitbake rev: 291289787bb042b99f0599babc2d67c220aadb87)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Part of [Yocto #2168]
When bitbake runqueue is teminated by disk monitor, it will send event
DiskFull. Update to handle it.
(Bitbake rev: a691de10d8b8de552628b277e78d47c607ee3a46)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Yocto #2709]
OE Core Commit c9b01af84b add elf image
type. This will cause hob build image failed.
Add elf to hcc supoorted image types to fix this issue.
(Bitbake rev: a93a58b7cea2ddb9596cb4d718c0801db5d1a295)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In build detail page, the response action of clicked the 'run image'
or 'deploy' button will accroding to below as ui design:
1)if there has one file in building result, it will responsed the
'run image'(now, we only support the qemu) or 'deploy' directly
2)if there has more than one file, it will popup a dialog with listed
created files type, they are has same action attributes 'deploy'
or 'runnable'.
Note: because the qemu image (runnable file) can't be deployed and
we can't generated a image that has the two attributes now, can be run
or can be deployed, so the code will not deal with this case.
[YOCTO #2155]
(Bitbake rev: 0d24b1e85a11b68c8464cf15b49d3fc78f216818)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed unnecessary button from Recipes screen and
replaced the button that diplayed packages size and total image size
from Packages screen with a label.
(Bitbake rev: e6ff1d4bab43fdcd8af1230f1d54615f53c1978e)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I am sorry that use os.tmpname which casue a security warning.
Follow Darren's suggestion to use tempfile.NamedTemporaryFile instead.
(Bitbake rev: fe514a130579302312f68821536d108c8ceb4363)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Yocto 2149]
Use the new progressbar in Hob, so that we can reduce the maintenance
burden of the multiple GUIs.
(Bitbake rev: 6c0da26adbdcaa0c56737bacddb61678a9095e32)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The combo view is not sensitive, after select recipes come back.
so fixed this issue.
[YOCTO #2500]
(Bitbake rev: debcea9c063f7bddcba1d4ed47edbe173ef1d9cf)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due in mistake deletion in previous patches, if building failed, will report
the error of no 'set_page', so add that function.
(Bitbake rev: b046f4316ee7f2afaa0bb723e4216714d9cb87a0)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to Darren's suggestion, subprocess.call() will wait until the
subprocess complete. So simplify the code, use subprocess.call() to wait
command complete.
(Bitbake rev: 3dea9d5a5af82d99d337238981807a4cb1bd5b93)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add comments for DeployImageDialog 'standalone' part of codes to make it
easy to read.
And tweak some strings.
(Bitbake rev: b0e604d3d6dbfcaeac0a2e0e4399aeb4327f8cbc)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Part of [Yocto 2388]
Update class DeployImageDialog to get ready for a standalone deploy
image tool. The standalone tool can be run directly without hob, and
add a button to select image file. So adjust the layout of
DeployImageDialog.
(Bitbake rev: 399cfbaf36ccd4b934e25f915e64b87f32a3eb82)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update function response_cb of DeployImageDialog to get deploy process
return value. According the return value tell user that deploy image
successfully or not.
(Bitbake rev: f78f6d43a68e0f1dc4d3e4164eed453fcb9c22a8)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove extra spaces at the end of line or blank line.
(Bitbake rev: 70b75a05a806fecf8be15b9ba66fec2eb87dcce4)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 094742bed2 re-implement the
function popen_read(). If there is no USB device, it crashes with
"ExecutionError: Execution of 'ls /dev/disk/by-id/usb*' failed with exit
code 2:"
Replace popen_read() way with glob module to get the USB devices.
(Bitbake rev: 0c43fe72e3c6a12ac19173d8cbbad81af21c2d85)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When I try to call function which_terminal() of utils.py directly,
it complains NameError: global name 'bb' is not defined
So import module bb
(Bitbake rev: 9e370d9b1022112be2ac8f73feb182b1bba179b0)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The combo item index dosn't be increased as the insert a dummy item, when
execute the upadate base image combo operation.
[YOCTO #2500]
(Bitbake rev: 59e19634a84fcb4c34b92cdcf7a9ea807c9abb63)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the qemu_image_kernel selection view box to image detail screen GUI, and
changed the 'run image' button clicked work flow.
[YOCTO #2155]
(Bitbake rev: d548eb8a03cfba5c64c018898972bc0a0bdb280c)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Interpret some special characters for label markup, such as &, <, >, etc.
Otherwise, the message dialog can't show them, and worsely, it makes the
whole message blank.
[Yocto #2492]
(Bitbake rev: fb82f6eb5405274f702bd6d64cbe995fd4b74145)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a user uses a very old version of Hob and does some work,
later on he/she upgrade to the latest version of Hob, because
Hob may change the settings (add more config option into the Adv.
Settings dialog or remove some), then the old templates are not
loadable and workable for the new Hob.
Even though the user hasn't save any template before, the Hob could
remember the settings between Hob sessions as a default template,
(Remember we have a bug to ask Hob remember between sessions?),
the new Hob will also load the default template.
By adding versions, we can easily to fix the issue. If the versions
don't match, Hob will remove the old default template first and
initiate a new build, which has very very little impact on the user.
(Just can't remember from the previous session after the user upgrades
to a new and incompatible Hob)
[Yocto #2492]
(Bitbake rev: d5dd9a7af9d35c588528f9937430d1ef5de216c6)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cancel some inviable code and fixed this issue
(Bitbake rev: d2e2c917e4a93ec7fd344a2c703d526ce7b690cf)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
there are a repeated function in builder.py and imagedetailspage.py,
so combine them to one.
(Bitbake rev: 4bada20cd244a2dd6d72acd38f0cadc90453e60b)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to show a friendlier error message that does not bury the
actual sanity error in our typical preamble about disabling sanity
checks, use a separate event to indicate that sanity checks failed.
This change is intended to work together with the related change to
sanity.bbclass in OE-Core.
Fixes [YOCTO #2336].
(Bitbake rev: 24b631acdaa143a4de39c6e1328849660c66f219)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As ui design, we should set at least one primary action for 'My Image' and
'Image detail' screen as the differnt selected image. if no 'run image' or
no 'save as template' or no 'deploy image' we should set 'build new image'
[YOCTO #2326]
(Bitbake rev: d848af637e9a14b627533bee65bf16f680dff854)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because some screen not support the alpha visual channel, so the function
'screen.get_rgba_colormap()' will return None, it's a compatible issue, so
change it by another way.
(Bitbake rev: e58ba1ad944ea1ba95a5ada80d4c88f0165bd1ca)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For builddetailspage.py:
The "f" was a stream in the past, it is a string now, so it doesn't
need f.close(), and change its name to "branch".
And we don't need the "2>&1" since bb.process.run() can handle it, it
will raise exception when error occurs, we should handle the exception
ourselves if we want to ignore the error.
For hig.py:
Use bb.process.Popen() since it doesn't need the return value. If we
use bb.process.run(), the parent process will wait for the child process
to terminate to get the result.
[YOCTO #2511]
(Bitbake rev: ab10f3da1976581c371c43cdb88f405cf6fbcd95)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set begining folders FileChooserDialog for the select images and
some local directory configurations. That may make user feel more
convenient.
(Bitbake rev: 047ad35c0c869883509557aeb982e0b784ad2e71)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In image detail page, the primary button should be an 'orange hob
button', there has a primary button is not, so change it.
[YOCTO #2326]
(Bitbake rev: 884a0b2d927404991b7e23d5bbfab096a5b7e849)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After parsing recipes, Hob will populate recipes and packages, which is probably
time exhaused. So, this patch is to adjust the progress bar and ensure 100% is
set if and only if all populations are done.
The patch also fixes "weird 18 second delay when parsing recipes" on build appliance.
Because Hob is doing something, but the progress bar shows 100% and wait there.
[Yocto #2341]
(Bitbake rev: 2c4a21dc8a588c8cf05549ddd9734731a46bea10)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace os.popen with subprocess.Popen since the older function would
fail (more or less) silently if the executed program cannot be found
There is a bb.process.run() which will invoke the Popen to run command,
use it for simplify the code.
For the:
p4file = os.popen("%s%s files %s" % (p4cmd, p4opt, depot))
...
for file in p4file:
list = file.split()
in bitbake/lib/bb/fetch2/perforce.py, it should be an error in the past,
since it didn't use readline() to read the pipe, but directly used the
split() for the pipe. Use the bb.process.run would fix the problem since
bb.process.run will return strings.
More info:
http://docs.python.org/library/subprocess.html#subprocess-replacements
[YOCTO #2075]
(Bitbake rev: 8d6700255a6d4dda403c89b171a6d4a1883e5aae)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace os.system with subprocess.call since the older function would
fail (more or less) silently if the executed program cannot be found
More info:
http://docs.python.org/library/subprocess.html#subprocess-replacements
[YOCTO #2075]
(Bitbake rev: f5b3bf115dc1ffbfb241a49cec0fc3654cb71021)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
issues: when build a image for atom-pc, the output does not include live
image, and 'Save as template' should become the primary action on the screen
[YOCTO 2326]
(Bitbake rev: e9516c7e14d782b943cc6e6a2e5e2111edf03d8c)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As ui design, adjusted the line width for each base image description
[YOCTO 2310]
(Bitbake rev: 8bce98b23bc9cbc4da4464bfbaeb4e1a1aaca5c5)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
change the top bar display in build 'issue' page
[YOCTO #2183]
(Bitbake rev: 0705d3db1ce6d0f29301e2428c990ab0d9b2860e)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The image name shouldn't be passed from outside caller, since the image
name may not in the combobox list. Getting the name from
update_image_desc() internally.
(Bitbake rev: 6635cd7bc2a448d1324e9344100f97613f4272b5)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Define BBUI_IMAGE_WHITE_PATTERN variable to indicate which image is
allowed to be displayed in image combobox.
Define BBUI_IMAGE_BLACK_PATTERN variable to indicate which image is NOT
allowed to be displayed in image combobox.
This fixes [YOCTO #1581]
(Bitbake rev: 960461bc12945675af3081eb469f932f4a6eb1cd)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The indication of the included packages/recipes in the top right of the
GUI, per design, is a button which switches the Notebook to the included
tab.
(Bitbake rev: 494534cae6211d9055098562df1f35b56858f3ec)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The width of the combo boxes drop down should match the combo box
itself.
(Bitbake rev: 93e66f494730d0840dd1d4f3ed924d91e6489995)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dark text on a dark background is difficult to read. Further the design
document uses white text.
(Bitbake rev: a84304ccf06a012817a5e6495d53147efcbed960)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The custom HobNotebook widget was implemented to address perceived
deficiencies in the gtk.Notebook API.
Recent inspection reveals that the API is capable of all that Hob
requires of it and therefore maintaining a custom class to provide
similar functionality does not make sense.
Addresses [YOCTO #2276]
(Bitbake rev: e683caa9863bbb52480346669806f22173629a5e)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'bitbake -u knotty2' never failed which was caused by main() not
propagating the exit code.
(Bitbake rev: 243e4ba405b88fd466bec7b4aa042d20aa6121ff)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
as ui design, add number of packages for each group, and make the
text font to 'bold' when row be selected
[YOCTO #2195]
(Bitbake rev: 5812176a679a39a4d096134c871c3d24a7e505ea)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When case about No browser, such as running in 'Build Appliance', user can't open
the hyper link, so add this work around for user. (Checking the browser is avaiable
or not is hard by different system and browser type)
[YOCTO #2340]
(Bitbake rev: 02cc701869bceb2d0e11fe3cf51fb0582cda01b0)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the arrow icon refresh so fast as the go backward by illusion, so adjust it slow.
[YOCTO #2335]
(Bitbake rev: ac4a8885fafdc0d1e79831334ead9a8ddb6e2472)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We may meet certain command failure during build time, for example,
out of memory. In this case, we need to clear the "building" status.
This fixes [YOCTO #2371]
(Bitbake rev: 283dbbbf5d34adb4c9e3aa87e3925fdebe21ff42)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In original scheme, sanity check is part of the parsing process. If a
sanity check fails, it means the parsing is failed and values in Hob
GUI may not correct.
With this commit, Hob will actively issue sanity_check() after the
parsing is completed.
This fixes [YOCTO #2361]
(Bitbake rev: 36968815dcc91759eeacb308bf4b294af416eee5)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If user changed the proxy setting, we will reparse configuration because
it may need sanity check.
(Bitbake rev: 0be54917cd88ea8f110027a7840ac69a411fd589)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To ensure the users configuration is sanity tested enable the sanity
checks after the GUI has started but before any parsing is done.
(Bitbake rev: 244ce2b900ae6cecbeeccfe2056e61c132476261)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current description is empty. This adds a default
description for hob's dummy_image.
(Bitbake rev: 68a65e5eeeb01d78444f1e5b5d1bb7b21c9d0b2c)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If user stops a build, we need to firstly set the button insensitive and
then hide it. This ensures the button's init status is "insensitive" in
next build.
(Bitbake rev: ea37272ccc28d6e24b48286e5c4c3edbad1d57cd)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally the upper value for image size and extra size is 1024M, which
is relatively small. Enlarge it to 64GB.
Besides, fix tooltip for toolchain build.
(Bitbake rev: 99f01305b4c2253567a1a13a33339b1755a86e6d)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In package selection page, treeview cell data callback function not cover the 'else' case, so parent item will render the pervious value.
(Bitbake rev: 98694c1dbc276cc151f393db67bfd43442da28ba)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'binb' popup window should be "set transient for" the main application
window which they were spawned from.
(Bitbake rev: a6f45b23851e22c7793d9a534fd197316bb5b9b8)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In those systems which had use gtk overlay-scrollbar feature,such as
Ubuntu 11.10, we have the issue with the multiple overlaped scrollbar in
'Recipe View' notebook or 'Package View' notebook, this patch is going to
fix it.
(Bitbake rev: f6be78d8a45dc501c2bbe1e1a399a342dabe11d5)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit fixes the contents in imagedetailsscreen, which lacks some
kind of image types, e.x., iso and hddimg.
(Bitbake rev: 4505097f4f7834857a6086d5dabeedb24b49cf4c)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a wrapper with exception handling to call self.server.runCommand() safely.
Again, add exception handling to load_template() and save_template()
(Bitbake rev: cb07a027d3366ed30b0f7e5e85d08c6fda4eb5b9)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit merges some functionalities together and avoid unnecessary
signal handling. This can help to speed up the Hob startup.
(Bitbake rev: e5a6eb4f007bf270f2fddc814eb856da46e20eee)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If NoProvider event is received, we will handle it in runningbuild
module and send notification to Hob instance, avoiding stepping into the
final page with no image built out.
This fixes [YOCTO #2249]
(Bitbake rev: 067bc46a0fbc542fef1fcaa406ad3737a4c5a55a)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reset user recipe list and package list after the user changes the settings and
triggers recipe reparsing.
This is to continue to fix the bug [Yocto #2255]
[Yocto #2255]
(Bitbake rev: 95f4e9dc351f67442844ff52f90fc154fa95ba95)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is to remember layers and settings between Hob sessions, which
includes:
- Put some variables for the build details screen from Configuration to
Parameters because they are not actually for build but for show
- We create a dummy Configuration instance and a dummy Parameters instance
in __init__ of builder
- The two instances will be assigned the real values by
update_configuration_parameters() after parsing (in the event callback)
- When it is the first time to launch Hob in a build directory, nothing is
remembered since everything is fresh.
- The feature is implemented with templates, and based on the hook for Hob.
- When the user changes the layers or the settings, a default template file
is saved into ".hob/".
- Later on, the layers and the settings are remembered by loading the default
template automatically.
(Bitbake rev: f7c874ab930b9e7f95e79d0e84e62eb9b967f566)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally we use hardcoded "build" as the default task. This commit
fixes it by using BB_DEFAULT_TASK.
This fixes [YOCTO #2283]
(Bitbake rev: 7540f8d446345559ea9b47f4ff71d203ffdfaf8d)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If user selected a base image and didn't customize it, Hob will still
build the selected image instead of hob-image.
This fixes [YOCTO #2253]
(Bitbake rev: a74a6a033e66a0ae7b47c84d842bdd54066c69a1)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously we use the template file name as the image name. This commit
changes to use the original selected image into template file.
(Bitbake rev: 14a9da66fe08d181f45853c52e0c9f14773070a8)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the requried packages task-core-standalone-sdk-target(-dbg) for
building toolchain.
Fixed bug [YOCTO #2274]
(Bitbake rev: 434fdb3913cc78e2e9cdeede4c4fa7f1c8ef8892)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When Hob is busy with generating data, exiting Hob is not allowed.
That should be reasonable because at that time the mouse cursor is not a pointer.
If users want to exit, they can click "Stop" first and then do exit.
That is also a walkaround for [Yocto #2142]
(Bitbake rev: ad7f6bf3c7c4c15d546781aaefdaf03f00193f7c)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make Hob's specific variable settings take effect, we add a Hob
config hook at the end of parsing for each configuration file, and in
the hook function, Hob will set its own variables to the data store.
This fixes:
[YOCTO #2210]
[YOCTO #2254]
(Bitbake rev: 0ec7d1bbfd2e09ae60f99e6134b20ffd1d9145b1)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch is to correct 7e5d41ab22
(Bitbake rev: b6e68019494044305ab28492a517d1eafea851c3) to fix the
missing functions.
[Yocto #2281]
(Bitbake rev: 3c2808b67384e92601cbd66877c36ca40df7c7ba)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is just a copy of the same method from the recipeselectionpage so
that we can actually run hob again.
Fixes [YOCTO #2281]
(Bitbake rev: b6e68019494044305ab28492a517d1eafea851c3)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also adjusted the cmdline ordering to work correctly
with both xterm and vte.
(Bitbake rev: 4219e2ea033232d95117211947b751bdb5efafd4)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding this simple version of a terminal selector for use
hob since it's needed. Moving forward in the 1.3 release
the existing code in meta/lib/oe/termnial.py will be migrated
to core bitbake code and this will use that code.
(Bitbake rev: 359a9ea4c8d61247064db3eaefb816ef116d332a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because some variables not be updated when building started, so add them
to the updating function of configuration class, and add reset function of
configurate treeview of building detail page
[YOCTO #2244]
(Bitbake rev: 06ce753fd4680a204ccc63949ace637dc1c115e2)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't use "grayed out" but use "show/hide" for those appliable buttons
in the image details page.
[Yocto #2143]
(Bitbake rev: df1564d78d081ceab51d628d227e57b7a197259b)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch is to fix [Yocto #2255]. Now the logic is:
- If users change the machine, the image combo is empty for users to select.
- If users load the template, the image combo should set the value of
selected_image specified in the template.
- After loading a template, if users change the machine, the selected_image
specified in the template should be removed from the image combo because
it is probably invalid for a new machine.
- If users customize the recipe/package list, and change the settings which
causes reparsing, selected_recipes and selected_packages should be remembered.
- If users add more layers, selected_recipes and selected_packages should be
remembered.
(Bitbake rev: e549b11f4f31863393f62a253ee96bead4594523)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the steps in IMAGE_GENERATING, the patch consolidates them into
generate_image_async() to call.
(Bitbake rev: d4f2335e40d4d667847d3faed79bcee74baeea37)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the steps in PACKAGE_GENERATING, the patch consolidates them into
generate_packages_async() to call.
For the steps in FAST_IMAGE_GENERATING, the patch also consolidates them
into fast_generate_image_async() to call.
(Bitbake rev: 1ec53d41774528ab01e835d1cf4166f0202a7c38)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the steps in RCPPKGINFO_POPULATING, This patch consolidates them into
populate_recipe_package_info_async() to call.
(Bitbake rev: ed2aa6f235e1b789af8a33729302a4269674c6b4)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the steps in CONFIG_UPDATE, the patch consolidates them into
update_config_async() to call.
consequently remove CONFIG_UPDATE since MACHINE_SELECTION covers it.
(Bitbake rev: f583d43e87c049bdee88890e289f14520c7c31a1)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initiate_new_build() (changed the function name into initiate_new_build_async()
to indicate it is an async function) or the similar sub-functions are called at
different places.
This patch is unify to call initiate_new_build_async().
(Bitbake rev: ec42be626a5d6362a09f12f4f4025ad92d70c89b)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As UI request, in recipes selection page, if user exclude a item,
the related depends recipes will be excluded together,so the view
clearly to add it.
[YOCTO #2100]
(Bitbake rev: c9eed04c6275ef2c694f89e047f85c7de76f89b6)
Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If zypper is selected, RPM packaging will add extra 50M free space to
the final image. We need to reflect it in package selection page.
(Bitbake rev: 22344f13d5e201be0d6381c6542d05c6fde7eec3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes, users may open an image that is not built by Hob, therefore
its image name is not started with "hob-image-". This commit sets a
looser rule for runnable image matching.
This fixes [YOCTO #2240]
(Bitbake rev: 7b81389566cb27451557ca11ec8ed40ef2630543)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Once user did customization to his base image, we change the base image
to be "Create your own image" to avoid some issues caused by the
relationship between base image and its default recipes and packages.
This fixes [YOCTO #2211]
(Bitbake rev: 8edad8d282b69896237e956a00c66cd4d10ef494)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Requiring a double click to show the tooltips isn't very intuitive, add
a callback to show the persistent tooltips on button release.
(Bitbake rev: 80af7e72a9404044910fca7f9265e66354f747a6)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set the expand property on all columns other than the 'Included' column
so that the included column remains at the max size set.
(Bitbake rev: e1406d75c0643a2e65bb61649958e05e730fb332)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'Included' tab of the notebook should show the 'Group' a recipe
belongs to, per the design.
(Bitbake rev: 4f45d791644e383b11cbcfd4fb02866518cb9c04)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The design calls for a single 'Brought in by' item to be shown in the
tree views with any extra items to be shown in the tooltip.
(Bitbake rev: 6866271da738237d3a119e291ac8f9d2c517e124)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the previous two changes we now work on Gtk+ 2.18 and PyGtk 2.16
(Bitbake rev: 5ccbcdf8c47f2f20655a3ea0f60e5870cdba6f83)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gtk.Widget.get_sensitive() convenience method is only available
in Gtk+ 2.22 or later, instead use the sensitive property of the
gobject to determine whether the widget is sensitive or not.
(Bitbake rev: 82ea0619e9ecf9107b75692385bcf1434ea8a307)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CentOS 6.x doesn't ship with new enough pygtk for this API.
(Bitbake rev: 2b6ce54cdc23c5fc1325e42634287134f55aacbf)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
params["pmake"] should be in the format "-j int".
When loading/saving "PARALLEL_MAKE" into templates, configuration.pmake will be
converted into "-j int", as "PACKAGE_CLASSES" and "BBLAYERS" do.
For "PACKAGE_CLASSES" and "BBLAYERS", params["pclass"] and params["layer"] are
also strings rather than the types of configuration.curr_package_format and
configuration.layers.
(Bitbake rev: d49db15badb77855cef855ee73430fcbc16b6916)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
image_fstypes in the configuration has been changed into a string rather than
a list. Here we correct it in __init__() of class Configuration. At other places,
image_fstypes are all strings.
(Bitbake rev: 59dd7e91c11e0348f967578f32e13f5984c6a452)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid the empty white space appearing on top of the machine selection combo
box and the image selection combo box in the "Image configuration" screen
[Yocto #2166]
(Bitbake rev: 9d30ad56803c67d2dc7ebddd7c339038438f02ba)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We call intsize_to_string (and string_to_intsize) in 3 different places.
We unify the implementations into one place.
(Bitbake rev: 578ce86a9ac2110f5b128aae582c6e0b3e739cec)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle exceptions during type conversion to integers.
(Bitbake rev: bb3a4e2d40486a347c13563d73e4df6d015a3c6c)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handle exceptions during type conversion into integers.
(Bitbake rev: e03da8876045af545303db2b8044a17657337140)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We also need to check if the selected image is "Create your own image"
and set it as active.
Besides, to avoid the impact of set_active(), we need to move the
connect signal in the end of the update_image_combo() function.
(Bitbake rev: 54ae7ddac450b4717e5ccae3bfe9acb479449451)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We will not display multilib recipes and tasks in separate tabs,
therefore remove the specific types.
(Bitbake rev: da69e665196714b0f2039c11f9f232db7b58bce3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob uses API from pygtk 2.22, therefore check to see whether this
version is available and exit cleanly if not.
(Bitbake rev: 192d5fdf9ea27cdc8b043204857ae5b21173a011)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the deploy button is disabled since there is no deployable image,
the console will show the warning message:
WARNING: /home/yocto-build5/poky-contrib/bitbake/lib/bb/ui/crumbs/imagedetailspage.py:333:
GtkWarning: /build/buildd/gtk+2.0-2.22.0/gtk/gtkwidget.c:5684: widget not within a GtkWindow
self.deploy_button.grab_default()
This patch is to remove the warning message.
(Bitbake rev: 51a9a5557bb798b559874a4e6dc9924380b5d9a4)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously we reused the info display file which is for indication of tooltips.
But it is too small, when it is shown on the dialog as the dialog indication icon,
it becomes unclear after being stretched out. So, we replace it with a larger
icon.
(Bitbake rev: 87282847f1ba56420b0c6dbf04bea6e518962398)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If save every selected package into IMAGE_INSTALL field, and then build
the saved bb file by bitbake command line, it will report errors since
some packages could not be found since they are dynamically generated.
With this commit, Hob will only save those packages into the
IMAGE_INSTALL variable which are brought in by user.
(Bitbake rev: 6c970d07422bb9a8fcf339315587cfc9b207a44e)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally we added -dev and -dbg postfixes to our selected packages as
toolchain packages. However, some package names are modified in recipes,
so we could not rely on its base name. The new approach is to detect if
a package is selected, then include those packages under the same recipe
endswith "-dev" and "-dbg".
This fixes [YOCTO #2185]
(Bitbake rev: f99c66071bce63780301e1639d74316503ca934c)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes, certain variables have duplicated values inside, for example,
IMAGE_FSTYPES = "tar.bz2 ext3 tar.bz2 ext3"
We need to remove the redundancy for those values.
(Bitbake rev: 98849cf9201239b23bbbe9247db4d6901f0ed905)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initiate_new_build() function is in async mode and could not be called
before another async function.
Also we could not initialize the build if user simply change a setting,
therefore remove this function.
(Bitbake rev: c184cefe90115623e2312ad2bbe34ea95788c129)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If values in advanced is changed, we also need to reparse the cache to
get the latest value.
(Bitbake rev: 7b2f6744201511060f26cd2761e9556efec4b9a2)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Define the empty curr_mach to be "" instead of None.
Fix the judgement for ' if self.curr_mach == "" ' to be
' if self.curr_mach '.
Also set machine to bitbake server when "MACHINE" is not empty.
(Bitbake rev: 662fa1b126d5b9b3a80193205c22b2fe29305185)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alexandru DAMIAN
Richard Purdie
Andrei Dinu
Cristiana Voicu
Bogdan Marinescu
Martin Donnelly
Ioana Grigoropol
Cristian Iorga
Robert Yang
Jessica Zhang
Mihai Lindner
Constantin Musca
Seth Bollinger
Christopher Larson
Ross Burton
Jason Wessel
Paul Eggleton
Valentin Popa
Liming An
Kang Kai
Konrad Scherer
Martin Jansa
Shane Wang
Dongxiao Xu
Joshua Lock
Enrico Scholz
Beth Flanagan
Lianhao Lu
Saul Wold