According to UEFI specification all EFI platforms must support
GUID Partition Table(GPT) disk layout. Here is a list of advantages
of using GPT disk layout over the legacy MBR partitioning:
- Logical Block Addresses (LBAs) are 64 bits (rather than 32 bits).
- Supports many partitions (rather than just four primary partitions).
- Provides both a primary and backup partition table for redundancy.
- Uses version number and size fields for future expansion.
- Uses CRC32 fields for improved data integrity.
- Defines a GUID for uniquely identifying each partition.
- Uses a GUID and attributes to define partition content type.
- Each partition contains a 36 character human readable name.
Used GPT partitioning in all EFI kickstart files.
Tested result images on NUC, MinnowBoard MAX and MinnowBoard Turbot.
(From OE-Core rev: 66d4efeb0face5fc8a1755dcd2ed3a611997a04d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
(From OE-Core rev: ee16a283d695112236906338887c6eba109c9fb5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not
needed for any of reference BSPs.
(From OE-Core rev: 7b2443364a42c731bc9eefa6bb460262464e26b6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used ttyS0 console.
Removed usage of ttyPCH0 (FRI2 leftover)
Decreased bootloader timeout to 5 seconds
Removed 'vmalloc=256MB snd-hda-intel.enable_msi=0' as it's not needed
for any of reference BSPs.
(From OE-Core rev: b46825a6ce5cecd24fed814bae48f9cfd0b97568)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stopped using GPT partition table in mkefidisk.wks as it's not
supported by all reference hardware.
(From OE-Core rev: 07bb11b097a67ff89ae633fa1992db5494d75c0c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disk identifier created by parted doesn't match the one we generated
and used in bootloader config. We need to rewrite it to make our image
bootable.
Modified involved API and data structures to access previously
generated disk identifiers after MBR is initialized. Written disk
identifiers to MBR.
(From OE-Core rev: 221d3bdd6e0ab8a4d25e2c96bd976cbec4e76681)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added generation of partition UUIDs for MSDOS partitions.
UUID for MSDOS partitions is <disk identifier>-<partition number>,
where disk identifier is a random 4 bytes long number. It's usually
generated when MBR/partition table is initialized.
As UUID is used to point to the root partition in bootloader config
we need to generate it before the MBR is initialized.
After MBR is created we need to rewrite system identifier to match
it with what is used in bootloader config. This will be implemented
in the next commit.
(From OE-Core rev: 6ecc6addf4080eda75a15af077816c81c6bf70a5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sgdisk fails to set PARTUUID for msdos partitions as it's only
supported for GPT partitions.
Checked partition table format to run sgdisk --partition-guid
only for GPT partitions.
(From OE-Core rev: 0c1804821917d6d3a062ca19b63667d030138f21)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a preparation to use mkefidisk as a default wks for
genericx86* BSPs. This change enables usage of partition UUID
instead of device name to specify root partition in kernel
command line. It should make images to boot on devices with
boot device names that differ from what's mentioned in wks file.
(From OE-Core rev: 23cca700870230b46d251086441136e99659ef12)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename wks for systemd-boot per the suggestion from community.
Also amend description to distinguish it from others when
running "wic list images".
(From OE-Core rev: 6303dbbaa08214a37caf38e3b6b5a30a108bd3b7)
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Preserving images for every partition doubles disk space
consumed by an image build. As those images are not used,
so it's better to remove them after assembling final image.
(From OE-Core rev: 51171b4aa10f2218c5e27d785ca7bf4f3949a4b4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added serial console to kernel command line to to make it
easier to boot wic images on devices without display.
Tested on MinnowBoard MAX.
(From OE-Core rev: 9a774e3bcd5dc4c85d642acc7bf26095b8c620e4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rawcopy plugin copies source files to build folder before using them
to assemble result image. After assembling the image wic renames
source files to <image>.p<partition number>. If the same source file
is used in multiple partitions wic breaks trying to rename file that
doesn't exist.
Added <line number> suffix to the files when copying them to the
build dir. This should make filename unique even if the same source
file is used for multiple partitions.
[YOCTO #9826]
(From OE-Core rev: 43a809bfe99024083b4ab4eb9895b084c9c4fa80)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to wic documentation partition mount point is an optional
argument. Skipping mount point also makes sense in certain
configurations when one needs to specify a partition that is not mounted
by the running system, such as a recovery or a mirror partition (in dual
rootfs setups).
(From OE-Core rev: 5e063a4c6bb0e0623a4d25bb2bf6eecd9ad6b9f1)
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This wks is just a copy of gummiboot wks with bootloader
changed to systemd-boot. A very basic boot test on a X86
target is done with a direct-boot image generated by:
wic create mksystemd-bootdisk -e core-image-minimal
Because we plan to replace gummiboot with systemd-boot at any
time in the future, we summarize history (as much as I can) of
the current gummiboot wks before it's gone:
-----------------------------------------------------------------
commit 7d4bb40905
Author: Ed Bartosh <ed.bartosh@linux.intel.com>
Date: Wed Sep 2 13:58:02 2015 +0300
wic: get rid of scripts/lib/image
Moved content of scripts/lib/image/ to scripts/lib/wic as
one directory with the same name as a tool is self-explanatory
and less confusing than two.
(From OE-Core rev: 5dc02d572794298b3362378cea3d7da654456c44)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 77561e7191
Author: Ed Bartosh <ed.bartosh@linux.intel.com>
Date: Wed Sep 2 13:58:01 2015 +0300
wic: use ext4 in canned .wks files
Latest kernel doesn't have ext3 compiled in. Wic images produced
from canned .wks can't boot because of that. Switching to ext4
fixes this issue.
(From OE-Core rev: d281a65a81f369fc8d75023b8f911ce4106969c1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 072657ce98
Author: Tom Zanussi <tom.zanussi@linux.intel.com>
Date: Mon Aug 11 20:35:41 2014 -0500
wic: Add mkgummidisk kickstart file
This is the same as mkefidisk but uses gummiboot instead of grub-efi.
(From OE-Core rev: 5979409ebfab0bb07b3c2b2fcf14a722c441f07b)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-----------------------------------------------------------------
(From OE-Core rev: 546cd8352b8adce074831ec31cfa3bb2bf2f0084)
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new systemd-boot enabled in OE is the old gummiboot
merged into systemd project. Our intention is to replace
gummiboot with systemd-boot in OE once every feature based
on gummiboot is supported with systemd-boot.
Before we can purge gummiboot, we temporarily keep both of
the two bootloaders supported.
Patch doesn't do replacement for every "gummi" occurrence.
We think cleaning can be done in background after we disable
people to use gummiboot, so we just keep change small and
safe this time.
(From OE-Core rev: daa5f8b886408eb6a17898b18ac97d5a0d76d2cc)
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since mtools has been patched to live with filesystems with sizes
not divisible by sectors-per-track, we no longer need to try to
set the size based on our guess of the sectors-per-track dosfstools is
going to use.
(From OE-Core rev: 334e32af88b310ff1ed950d127a6dedeb460f8d0)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Encoded help text before sending it to pager.communicate as
it expects binary.
[YOCTO #9412]
(From OE-Core rev: 23c27d9d936efaa17da00525f1d2e2f98c53abc7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want the system to boot on its own, rather than the user having to manually
input the correct file at the EFI prompt.
[YOCTO #9556]
(From OE-Core rev: aa215c12d729c001ad3b8b98a7e203a9ad192211)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the path contains 'scripts' more than once the first occurrence will be
incorrectly used. Use rfind instead of find to find the last occurrence.
(From OE-Core rev: f30c486c17060d2f21618612804a692512ad6a57)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Included description of -m/--bmap option to the help page
produced by 'wic help create'.
[YOCTO #9413]
(From OE-Core rev: 7c749d4cfe1642d70a6b3643422ef69dec1775fe)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This option enables generation of <image>.bmap file for the
result image using native bmaptool.
[YOCTO #9413]
(From OE-Core rev: d64c7b37c40b052510419b4d6629b83319c833e4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added bmaptool -> bmap-tools pair to the dictionary
executable -> recipe as bmaptool is going to be used by wic
to generate .bmap file.
[YOCTO #9413]
(From OE-Core rev: 4684ac5f4d823a6afedc57aad0aa417bb17ba950)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generators in Python 3 don't have .next method. It's recommended
to use 'next' builtin instead. As it also present in Python >= 2.6
it should make wic code compatible with both Python 2 and Python 3.
[YOCTO #9412]
(From OE-Core rev: 9b7ab632e47d786dd979262015dbfb1254103f83)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed check for unicode type as it doesn't work in Python 3.
This check is not needed for wic as all its output seem to be
strings. This allows to run code under both pythons.
[YOCTO #9412]
(From OE-Core rev: a56924b4a0102e401b5e37d857a08bab15da974e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
stdeout and stderr content returned by communicate API has different
types in Python 3(bytes) and Python 2(string). Decoding it to 'utf-8'
makes it unicode on both pythons.
Decoded stdout and stderr output to utf-8 to make the code
working under both Python 2 and Python 3.
(From OE-Core rev: 5b556f58a171e3d45107bb56a1f780e5c1abba37)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Division operator works differently in Python 3. It results in
float unlike in Python 2, where it results in int.
Explicitly used "floor division" operator instead of 'division'
operator. This should make the code to result in integer under
both pythons.
[YOCTO #9412]
(From OE-Core rev: 997ff239bd753a7957cc14c6829b2f093d9bcef6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As bitbake is not ported to Python 3 yet it's better to
avoid using its APIs as much as possible to be able to
test wic under Python 3 at least partially.
Used distutils.spawn.find_executable API in favor of
bb.utils.which to get path of the command to run.
(From OE-Core rev: 9658956bf8a5da779e06f71941de9b3e89415cdc)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This suffix is not supported by Python 3. Wic code works
without it on Python 2 too, so it's safe to remove it.
[YOCTO #9412]
(From OE-Core rev: 296db7e33bd71585cac63dc78c2c95bc619b4a86)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic plugin machinery implemented using metaclasses.
Reimplemented plugin machinery using this advice from
https://wiki.python.org/moin/PortingToPy3k/BilingualQuickRef
Syntax for creating instances with different metaclasses is very
different between Python 2 and 3. Use the ability to call type instances
as a way to portably create such instances.
Now it should work under both Python 2 and Python 3.
[YOCTO #9412]
(From OE-Core rev: e62fe5a41bdcdd72b9b257fecff7ccdc59c76d33)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed 'raw', 'ask', 'choice' and 'pause' functions from
msger.py as they're not used in wic code and some of them
use raw_input, which is not present in Python 3.
[YOCTO #9412]
(From OE-Core rev: eb87d591ef67f1953b2689430ef6c5a6a27a5b6e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New syntax 'except Exception as err' is supported by Python >= 2.7.
Old syntax 'except Exception, err' is not supported by Python 3.
Used new syntax to be able to run wic on Python 3.
[YOCTO #9412]
(From OE-Core rev: 15e88714d6b0a93f72e8a19b083fcc1f2006e128)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'with' statement is not used in baseimager.py
It's supported by Python 2.7, which is included into all target
distros. Other wic modules use this statement.
Removed useless 'from __future__ import with_statement' from
wic code.
(From OE-Core rev: 528a1f20939589949831efbb4de6336776efe7d5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All classes in Python3 are new style classes and don't need
to be inherited from object. Wic code works fine without
this inheritance even with Python2, so it's harmless to
remove it.
[YOCTO #9412]
(From OE-Core rev: a146b03ee7d0aa5bc1722da5977a5952782b69bf)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced calls of dict.keys and dict.has_key methods with the
'key in dict' statement. 'key in dict' is more pythonic, faster
and readable. dict.has_key doesn't exist in Python 3.
[YOCTO #9412]
(From OE-Core rev: 003df7dfb932c551953fbf1bd769b3c31bd16fb4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dictionary method 'iteritems' doesn't exist in Python 3.
Replaced 'iteritems' with 'items' to be able to run the
code under both Python 3 and Python 2.
[YOCTO #9412]
(From OE-Core rev: 5b14eb8d68aaca82de4f8f6bcb28ad6f4a5125d0)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Print statements have been replaced with print function in
Python 3. Replaced them in wic code to be able to run it
under both Python 2 and Python 3.
[YOCTO #9412]
(From OE-Core rev: ee6979a19c77931c3cf6368e695e370d46192fef)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used sparse_copy API in favor of dd/cp in rawcopy plugin to
preserve sparseness of the copied raw content.
[YOCTO #9099]
(From OE-Core rev: 04eca59068a79ae6a9969be495c4cdf0c5c3e466)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copied partition images into final partitioned image using
sparse_copy API. This method preserves sparseness of the
final image. It also makes wic much faster, as unmapped
blocks of the partition images are not copied.
[YOCTO #9099]
(From OE-Core rev: 7f21427aca5df81d8881027fd98f71b821cf31d7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to make wic images sparse sparse_copy function has been
copied from meta-ostro:
https://github.com/kad/meta-ostro/blob/master/meta-ostro/lib/image-dsk.py
This function uses filemap APIs to copy source sparse file into
destination file preserving sparseness.
The function has been modified to satisfy wic requirements:
parameter 'skip' has been added.
[YOCTO #9099]
(From OE-Core rev: bfde62bdc03152a4d3d383512479b974fa867f94)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to make wic images sparse set of APIs has been copied
from bmap-tools project.
filemap.py module is taken from bmap-tools project:
https://github.com/01org/bmap-tools/blob/master/bmaptools/Filemap.py
It implements two ways of get information about file block: FIEMAP
ioctl and the 'SEEK_HOLE / SEEK_DATA' features of the file seek
syscall.
Note that this module will be removed as soon as bmaptool utility
supports copying sparse source file into destination file (this is
already agreed with the maintainer of bmap-tools project).
[YOCTO #9099]
(From OE-Core rev: 182639ddc9cda85c896a54c1c64fd1fb145071a1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved DiskImage class from utils/fs_related.py to
imager/direct.py as it's only used there.
Removed fs_related module as it doesn't contain anything
except of DiskImage.
(From OE-Core rev: b3cc471790784c28f9362fcd6fc6a81c4316754c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed fs_related.makedirs as is not used anywhere. The name is
easy to confuse with os.makedirs.
(From OE-Core rev: 796b114863ef20fbc89da45dbe6780abe1256f5e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need in this inheritance as DiskImage class
is used only in one module and no other classes are inherited.
(From OE-Core rev: 5af1d9bedc2c961eb91faf80251f24c3df754d76)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used truncate instead of dd to create wic images for the
following reasons:
- dd doesn't preserve sparseness
- truncate syntax is much more clear
- dd requires additional calculations of the image size
in blocks
- the way dd was used in the code is not always correct.
In some cases it was writing one block to the file which makes
it not 100% sparse.
[YOCTO #9099]
(From OE-Core rev: d2d0d18dfd3922411d856b98ab6ba5d64c9c1c9f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added explanation of --system-id option to the output of
wic help kickstart.
[YOCTO #9096]
(From OE-Core rev: 1a304afea4ad7be12ed5f0fcb397a538345a6b63)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used sfdisk to set partition system id if --system-id parameter
is used for a partition in wks file.
[YOCTO #9096]
(From OE-Core rev: a1f7f7e61fd20fb6319825648930f7b6aa0e0cee)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new argument to add_partition call to pass partition
system id down the stack.
[YOCTO #9096]
(From OE-Core rev: f2733df697192c0010c17b7bbb02f8679cb8f313)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Partition.system_id attribute and initialized it
from parse result of wks option --system-id. It will be
used by the wic code below the call stack to set partition
system id.
[YOCTO #9096]
(From OE-Core rev: 4f195a5b7574ebff8fbdb3045daa71f173f97a30)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added sfdisk -> util-linux pair to the dictionary
executable -> recipe as sfdisk is going to be used by wic
to set partition system id.
[YOCTO #9096]
(From OE-Core rev: 398aafa185acbc7239505f7107735e93a502f6d2)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh
Jianxun Zhang
Maciej Borzecki
Jussi Kukkonen
Christopher Larson
George McCollister