* dbus-glib was missing in DEPENDS in order to enable dbus backend
but because dbus was in DEPENDS lets enable this PACKAGECONFIG by
default
(From OE-Core rev: c832c457ff40f0f65ab28c17b78b88cb79823db1)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At the start of install, python swizzles the makefiles around, leading
to chunks of do_compile running again. These race against the install
target, leading to errors if pieces are being recompiled whilst others
are being installed.
For now, workaround this by running the compile target with the new
makefile, then running install ensuring a parallel make race doesn't
happen.
(From OE-Core rev: 72938a8631cfe5be5ac88ad67f2db595e2487e86)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The postinst files were being generated using purely the name of the package,
this unfortunately meant the run order would be based on the name of the
package and not the order in which it was installed on the filesystem.
If package A requires package Z to be fully installed, this causes a problem.
Note:
rpm - as the rpm based install proceeds the order is defined and captured.
so the problem is resolved there.
ipk - this unfortunately does not appear to solve the problem for ipk, as
the status file is not ordered in any appreciable way. This does not
cause any regressions however and sets the stage for a proper fix.
deb - this -may- fix the deb install. Early testing indicates at least some
ordering to the status file. But it's unclear if it completely resolves
the issue.
(From OE-Core rev: b5bafccb89f45d7cdd515b4ba45e0152ca7922de)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #5313]
When performing an attemptonly install, we should skip an errors and
continue to install everything else. However, there is a case where two
packages can conflict, and cause a hard failure.
This workaround, ignores this and allows the image to be constructed.
Note: Some items in the failed transaction may not get installed.
To fix this properly we need to find the issue in smart, and make it ignore
or at least attempt to resolve these kinds of conflicts.
(From OE-Core rev: 4228005689e31ebcafcf0969e80fcc021d1ae063)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case of QEMU machines, a global public DNS is provisioned,
as the network is not configured via DHCP.
Google's public global DNS server 8.8.8.8 is used.
Partial fix for [YOCTO #4587] (qemu machines case).
(From OE-Core rev: 05ebf5bbacc58315f1b33ffb80148d568f88855d)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When these functions change, the package should rebuild but currently it
does not. We need to add the dependencies manually as the dependency
code can't track dynamically created variables.
(From OE-Core rev: 4003218f774c38bb5de0d95a43153f8b8d7fc4ce)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When these functions change, the package should rebuild but currently it
does not. We need to add the dependencies manually as the dependency
code can't track dynamically created variables.
(From OE-Core rev: c5d7100a358244085a697a23790676df5eb4afa3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core commit 75a14923da has moved
run-postinsts script execution from S98 to S99 in rcS.d. run-postinsts.service
should check for this script and run it on first boot rather than
S98run-postinsts, which is for opkg/dpkg.
(From OE-Core rev: fe039170236080291c0220476a5809774f82ee5c)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make kmod-ptest able to compile with separated source and
build dir. Since kmod test files contain kernel modules for
many different architectures, strip and arch gets confused
and throws errors.
(From OE-Core rev: 61cb45869caaed6578a217effaa72d247395d078)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes the following QA error:
ERROR: QA Issue: nativesdk-dbus: Files/directories were installed but not shipped
/run
/run/dbus
(From OE-Core rev: 796b7510853e71f158ad18dcea4cd1a10c7ef294)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have a number (in fact most) BSPs that require INPUT_EVDEV for basic
functionality. The size increase is minimal, so we'll add it to the
standard configuration for all platforms.
(From OE-Core rev: 965affabbf36fa5b5e466d331479c2295269242e)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bb.utils.copyfile is for a specific purpose and more complicated than needed
here, so just use shutil.copyfile.
(From OE-Core rev: dc81df215cc94c279991df35125d94770a1bc3d2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some packages may return error while running opkg-cl configure, during
first boot. This will fail 'ExecStart' and 'ExecStartPost' will not run.
Without 'ExecStartPost' opkg-configure service will continue to run on
successive boot attempts. 'ExecStartPost' should disable this service
after first boot irrespective of 'ExecStart' status.
(From OE-Core rev: cd6041071ddf76693cda7632379ceddd1d21a7fb)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The cross-canadian compilers are now build once per architecture but were being
installed into tune specific locations which is incorrect. This adjusts things
so they are make TARGET_ARCH specific. We gain the tune specific parts from the
target sysroot which remains tune specific, the compiler and tools are independent
ot that.
binutils/gcc require sysroot options but since we reset at runtime, these shouldn't
have dependencies in the sstate checksums. They are therefore also excluded.
With these patches, switching machines does not result in a rebuild of *-cross-canadian
and the compiler is correctly located and referenced in the target images.
(From OE-Core rev: f58acab6414fe96d9e07ebbe86b348d2ac2bed5f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MACHINE=X bitbake nativesdk-pixman; MACHINE=Y bitbake nativesdk-pixman
where X is an armv7a machine and Y is not results in pixman rebuilding
due to the neon option. This is incorrect. The ultimate fix will be
not to apply target system overrides in the nativesdk case. Until
we do that we can at least work around the issue as done by this patch.
(From OE-Core rev: 2881747ec270bffc039d10198399e2686407b521)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only care about the end result in this case, not the specific inputs
that went into determining the gcc option. This change updates the code
to reflect that.
(From OE-Core rev: 83055511dab1e2aeefe84262ebe52595848c844b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you build nativesdk for machine A, then change to B you will see sstate
manifest warnings for the packagedata files. The stamps are machine
specific and should not be, ditto for native.
This patch copies the populate-sysroot extra stamp entries to avoid
these warnings.
(From OE-Core rev: a64de25d6006ec6dd777d8f3820a48244dfbf62b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of looping until the generated signature is non-zero, just
return 'ffffffff' if it's zero. This avoids an infinite loop if the
generated signature is always zero.
(From OE-Core rev: 34c74ba45c04efc2dd998545bf7a31d7b06a0ee0)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 609d5a9ab9e58bb1c2bcc2145399fbc8b701b85a added additional
initramfs functionality and created an additional task on kernel.bbclass
Adding this task was missed on the linux-dummy recipe, which causes task
dependency issues due to image.bbclass depending on
"virtual/kernel:do_bundle_initramfs". This change adds a dummy task
which resolves the dependency issue.
(From OE-Core rev: c0a8c5c07e0dd6f0ae302e9a4dcf7973e73e68e1)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures that makedevs will not cause image creation failures
when it encounters a pipe (fifo) that exists from a previous image.
This handles mode changes and it will correctly fail for dangling
symlinks.
[YOCTO #5288]
(From OE-Core rev: 3a4b0e7973bef43f16058137e64600e2f890b117)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dpkg uses xz as a compressor and the binary image is needed on the system for
dpkg to work correctly.
[YOCTO #1881]
(From OE-Core rev: 8f6bc04c9b563f8659ce0e053072deca02da38a5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a potential issue with the fastop code in pseudo since a process may
exit and allow some other function to run before the server has processed
the commands run by the process. Issues have been see with unpredictable
file permissions.
To avoid this, we ping the server before exitting which guarantees it has
processed the current command queue.
The patch was written by peter.seebach@windriver.com
[YOCTO #5132]
(From OE-Core rev: a8a1f12c51ffdca011db194894fd7d14c119fb09)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a bug in handling of the mxcsr register since cpu flags
were not getting updated after fxrstor operations. This small tweak
fixes that.
[YOCTO #5248]
(From OE-Core rev: 5dc43cdc08e6698afa16ba79f3506a1555bb3710)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Buffer used for copying a "%c" character was getting
out of scope when it was required by the sprintf operation.
[YOCTO #5272]
(From OE-Core rev: c7de71813c8f47438f44749136877442cf73d536)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Irina Patru <irina.patru@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
exit 0 was done if $D != NULL, if one or more
shlibsign executions fails.
(From OE-Core rev: 5dc3eb72c4b9b68ab13310383a90fe7779bf92a7)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A zero MBR disk signature is generally seen as no signature and
another partitioning program might install a new signature.
(From OE-Core rev: b6cafb1fcd6c168f8f4a4d2d5c74f3b425f156f3)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Activating the INITRAMFS_TASK can cause circular dependencies, but
that is up to the end user to resolve in recipes. The INITRAMFS_TASK
should also trigger immediate linking of the cpio task in the first
compile pass. This was a subtle regression introduced by: 609d5a9ab
(kernel.bbclass, image.bbclass: Implement kernel INITRAMFS dependency
and bundling).
This patch restores the previous behavior and only affects the
INITRAMFS_TASK which is not set by any of the default build profiles
in oe-core.
Reviewed-by: Andrea Adami <andrea.adami@gmail.com>
(From OE-Core rev: 36faac868e086e9c23537b107cdd973d7fd980bd)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently opkg uses a script to configure packages during first time boot.
This script is present in rcS.d and when 'sysvinit' is disabled this
script doesn't execute. For systemd only distros this newly added service
will run the opkg configure during first boot only.
(From OE-Core rev: fdcfcea5b8eae1769a217f8efea9c02f037f63fa)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libfm uses "preferences-desktop", so link it to the close-enough
"preferences-sytem".
x11vnc uses "computer", link it to "terminal".
pcmanfm uses "system-file-manager", link it to "file-manager".
[ YOCTO #4062 ]
(From OE-Core rev: d856488179d14d05f1121c171abf4eac82e81fb9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sato doesn't use the pcmanfm desktop, so hide the desktop preferences launcher.
(From OE-Core rev: 778ef56c4b5c0d450a9b2e1df2b3e963dcfebed9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During parsing this recipe builds up a list of splash image files,
however it was recording full paths to local files (i.e. the files next
to the recipe) and then in do_compile it was pointing to those instead
of the fetched files in WORKDIR. Fix it to use the fetched files which
has the added benefit of the do_compile signature not changing if the
recipe is moved around.
Fixes [YOCTO #5250].
(From OE-Core rev: f1850f9835651baee8d3a0858d00a5d22efcab19)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We wipe out and regenerate all configure files so there is no point in
patching them.
(From OE-Core rev: 8d7036cdb71e66e619053c2545cfc1fbddf1895b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
native recipes were not using the site files. There are some things we need
to correct such as not using the path to sed-native. This allows us
to deploy settings globally for all recipes rather than hacking around
then in individual recipes as libtool-native used to for sed.
This fixes a regression introduced by
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=32edeb391f2107bb66b361cdcd4b8d4447731c33
(From OE-Core rev: db2eb3258844458569b7d4e6ed82c345858a3b99)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems strange that runlevel always returns 1, The comment says it is
related to sysvinit, but if we enable systemd, sysvinit will not be
installed. and we have created a link for runlevel to systemctl if
systemd is installed.
(From OE-Core rev: adc11d60fd4b555198d6653cd71eb1372e0b03a0)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is correct behaviours to output help and version information,
and should return 0;
When input parameter is invalid, print help information and exit.
(From OE-Core rev: 7c61daa08fa51557e0e6785e738646cb5d8de91b)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add an example device_table in the SDK under /usr/share/
(From OE-Core rev: be697e3cfa67fa61aa9ef2c9c0c75f4ed452414e)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default value of SFTPSERVER_PATH is "/usr/libexec/sftp-server" defined in
dropbear-2013.58/option.h, but after commit 406bd38b423[bitbake.conf: change
libexecdir to ${libdir}/${BPN}], sftp-server is provided by openssh package,
and is installed into ${libdir}/openssh, so we pass it explicitly.
(From OE-Core rev: 5f6deb044226885912214532cebb1d871f03c53a)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xz is required on the target filesystem since it's needed
to unpack some of the bootstrap packages.
(From OE-Core rev: 3f302e6686e9c35d3fd771b8aed214bf739e59f6)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglinfo.inc has some board-specific EGLINFO_DEVICE settings but is missing the
dependencies. Maintaining them for all supported devices in oe-core isn't
scalable and this is trivially supported though a bbappend in each BSP layer.
This was also causing problems compiling eglinfo on meta-yocto-bsp's beagleboard
machine as the EGLINFO_DEVICE setting for beagleboard was telling it to use the
closed GPU drivers, which are not supported in meta-yocto-bsp.
[ YOCTO #5224 ]
(From OE-Core rev: 2c1e147e61875054039ff08c36657c68c73037ee)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The battery applet emits a warning if the hardware doesn't have a battery (it
shouldn't) and the parser emits a warning if two separators are used in a row
(which happens if the hardware has a keyboard). Silence these with a patch from
upstream.
[ YOCTO #4061 ]
(From OE-Core rev: 4e2b86787ed7a44ad88aa1431207d049c2cb444a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The various populate methods need to accept a path as an argument vs
using hard expanded variables. In the case of the boot-directdisk
class it uses a different path for HDDDIR but it gets eclipsed by the
the class definition at the point in time ${HDDDIR} gets expanded.
The logical fix is to pass the arguments to the functions as opposed
to using globally expanded variables from the class definitions.
This patch changes 3 things:
1) syslinux_hddimg_populate takes an argument for the destination
2) syslinux_iso_populate takes an argument for the destination
3) populate is changed to boot_direct_populate because there
was a conflict with it overriding the populate in bootimg.bbclass
[YOCTO #3994]
(From OE-Core rev: 63d164b755b984021f7e3cdba7280918ded6e821)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A newer version of syslinux is required for an EFI enabled isohybrid.
This is used for the the capability to generate 3 types of ISO images,
all of which can be booted off a USB device or HDD if copied with dd.
1) PC BIOS only ISO
2) EFI only ISO
3) EFI + PC BIOS ISO
The syslinux.bbclass required a minor tweak because a few .c32
libraries require dynamic loading from the created media as of
syslinux 5 and up. This was a good time to also fix the
duplication of the AUTO_SYSLINUXMENU block.
[YOCTO #4100]
(From OE-Core rev: 17d74fbd09e377e100423e1a73b9d4ce761a21d7)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mkzftree is needed to allow ISO images to be compressed with
minimal runtime overhead. Below is an example of the savings on a
core-image-minimal.
Before ls -l:
24117248 core-image-minimal-qemux86-64.iso
Using the mkzftree ls -l:
16777216 core-image-minimal-qemux86-64.iso
(From OE-Core rev: 808d4371939ec48ed62e0c0b6614b96d61b1f7b8)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SYSLINUX_SERIAL variable was hard coded and occasionally needs to
be different for the kernel argument vs the syslinux argument.
In the auto-generated boot mode console=tty0 was hard coded, and this
is not needed at all, and causes problems in some cases if a end user
wanted to change the console=... via the kernel boot argument APPEND
mechanism. The default can be forced with SYSLINUX_DEFAULT_CONSOLE
for systems that need a special specification to enable the frame
buffer instead of a serial port.
[YOCTO #3944]
(From OE-Core rev: cf2fba810a8a59cff71bf2c12e516e9080146604)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The syslinux.bbclass already has support for automatically generated
serial and graphics menu choices. This patch adds the same concept to
the grub-efi menu. That makes it possible to generate a single image
which can boot on a PCBIOS or EFI firmware with consistent looking
boot options.
[YOCTO #4100]
(From OE-Core rev: 8444199fb598012f54853b010b5e5cce750db89d)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the latest mkisofs it is possible to generate 3 different types
of ISO images, which can be used in various scenarios.
1) PCBIOS Only ISO
- This option remains unchanged by this commit
- Uses syslinux menus
- Can be directly copied with dd to a USB device
- Can be burned to optical media
2) EFI Only ISO
- Uses grub 2 menus
- Can be burned to optical media
- If you want to use this image on a USB device
extra steps must be taken in order to format the USB
device with fat32, and copy an EFI loader which will
in turn load the iso image
3) PCBIOS / EFI ISO
- This is a hybrid image ISO that will work for case 1 or 2
as above with the same restrictions and boot menu types
depending on what type of firmware is installed on
the hardware or depending on if EFI or "Legacy Boot" is
enabled on some UEFI firmwares.
The syslinux.bbclass is now always required because that is where the
isohybrid dependencies come from as well as the configuration data for
the isohybrid. The isohybrid is the secret sauce which allows the ISO
to work as optical media or as a disk image on USB or a HDD/SSD.
[YOCTO #4100]
(From OE-Core rev: a4baf911ab9d306ce5200e7d794ed6a9ccb25f30)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa
Richard Purdie
Mark Hatle
Cristian Iorga
Muhammad Shakeel
Tudor Florea
Paul Eggleton
Bruce Ashfield
Ross Burton
Jonathan Liu
Nathan Rossi
Saul Wold
Marius Avram
David Nyström
Jason Wessel
Roy.Li
Jackie Huang