Ensure that this variable has a default value so that we don't get debug
messages that the variable couldn't be expanded.
(From OE-Core rev: 27fd1bb7969b558864463450e1837c4400a03f9c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you run bitbake -b on something using autotools with dependencies on
m4 files, it currently fails as the TASKDEPDATA is incomplete for
bitbake -b
and this means the relevant macros aren't found.
Work around this by adding *all* m4 files for the -b case (and show a warning).
[YOCTO #8890]
(From OE-Core rev: 60207e0cf3a5bce9123d3631a10a9540c72a9034)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We go to the effort of finding the value of start, we should then use it
rather than relying on the value of dep being preserved from the previous
loop. Took me far too long to notice this issue when changing the code.
Also drop an unused variable.
(From OE-Core rev: c546cced50ce8b72fe55f9a7cfe7fdb23c51d1ad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use oe_runmake like in base.bbclass so that EXTRA_OEMAKE will be
respected.
(From OE-Core rev: 5e89a79ae7f26735e523917555251313995d01d4)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The config.log written by autoconf includes many pages of useless output,
followed by an obfuscated error message, and then more pages of every variable
that's been set. It's only understandable if you're well versed in how autoconf
behaves, and often in simple failure modes doesn't actually make it clear what
the problem was.
Instead of outputting the whole config.log to the console when do_configure()
fails, use bbfatal_log so the human-readable configure output (not the
config.log) is shown to the user, and tell the user where config.log can be
found if they need it.
[ YOCTO #8856 ]
(From OE-Core rev: 55e263c559098cce99d8c3ef57ccc39f1d4a6848)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The absolute path (/path/to/configure) caused VPATH in Makefile to be an
absolute path, and then it will be in elf files, use relative path to
run configure can fix the problem.
This will reduce a lot of buildpaths QA issues in a world buld.
[YOCTO #8894]
(From OE-Core rev: 2c6ad43af0a0c4db5d7fd342be8585bec66debfb)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OpenJDK-8 has it's configure script at common/autotools - which will cause
the entire assumption of ${S}/configure is regenerated by autoreconf, intltoolize or alike
fails heavily.
Also - other configure mechanisms can be supported more similar (see how pkgsrc
manages different ones ...)
(From OE-Core rev: fe506eddb0790e37ac1e50f37fa2e32ad81d5493)
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The logic is supposed to avoid following dependencies when we depend on
a target recipe which depends on a native recipe. The problem is, we were
marking the dep (the native recipe) as already processed when we avoided
traversal, meaning that even when that recipe would be pulled in via
a different dependency, we skipped it there too, and whether it was skipped
entirely depended on the non-deterministic dep processing order. If the first
one to be encountered was via the indirect target dep, it wouldn't end up in
configuredeps, otherwise it would.
As we want to avoid traversing that particular dependency relationship, not
*every* dependency on the native, we should continue, but not add it to done,
so it can be traversed from other avenues.
This fixes an intermittent bug in some of my non-GPLv3 builds, where one
dependency upon gettext-minimal-native was skipped, but others should not have
been, resulting in it being removed from configuredeps entirely, and no
gettext macros being available.
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: e6d4f8198a8708f54fc17333ae643b51ed9100b6)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
${B} is the default cwd of tasks, so there might be race issues such as:
| mkdir: cannot create directory `${B}': File exists
[snip]
NOTE: recipe perf-1.0-r9: task do_configure: Failed
(From OE-Core rev: 72682d72b52355c3fed947167ca3c6064340ead1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CONFIGUREOPT_DEPTRACK can not be overridden since it is set by =
(From OE-Core rev: 758abeb219520ab5556186babcdb7e6660ce6e40)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change calls to bbfatal() to either die() or bbfatal_log() where we know
we want the full log to be printed by the UI (calling bberror or bbfatal
would otherwise suppress it since the change to connect these functions
through to the UI.) bbfatal() is still fine to use where there is enough
context information in the message such that the log isn't needed.
(From OE-Core rev: 04ed9a19e1b08003329138b8ab83691d13c11fd9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than just use d.getVar(X), use the more explict d.getVar(X, False)
since at some point in the future, having the default of expansion would
be nice. This is the first step towards that.
This patch was mostly made using the command:
sed -e 's:\(getVar([^,()]*\)\s*):\1, False):g' -i `grep -ril getVar *`
(From OE-Core rev: ab7c1d239b122c8e549e8112c88fd46c9e2b061b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Correct the whitespace in this variable to make this more readable when
debugging, no functional change.
(From OE-Core rev: 4bb586a470a15cf3b93538e8c749a6fb8479c990)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a similar way to http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=aa1438b56f30515f9c31b306decef7f562dda81f
there are more find races in the autotools class.
For recipes with PACKAGES_remove = "${PN}", the find which removes
.la files can race against deletion of other directories in WORKDIR
e.g.:
find: '/home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7/sstate-build-populate_lic': No such file or directory
| WARNING: /home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7/temp/run.do_configure.6558:1 exit 1 from
| find /home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7 -name \*.la -delete
Fix the remaining races in the same way.
[YOCTO #7522]
(From OE-Core rev: 79770ca14a0cc2f4112fb4d8dc2d8832701b6d5d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For recipes with PACKAGES_remove = "${PN}", the find which removes .la files
can race against deletion of other directories in WORKDIR e.g.:
find: '/home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7/sstate-build-populate_lic': No such file or directory
| WARNING: /home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7/temp/run.do_configure.6558:1 exit 1 from
| find /home/autobuilder/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/qemux86_64-poky-linux/init-ifupdown/1.0-r7 -name \*.la -delete
The simplest fix is to add the find option which ignores these kind of races.
[YOCTO #7522]
(From OE-Core rev: dd8099ca3092fbd5c685e5ef1b1c5a8185a6893d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a siteinfo enabled tasks re-executes at the wrong moment whilst something else is
in do_configure, the _config files can be removed which upsets autoconf and
causes build failures.
Use the same approach as we do for dealing with the aclocal files. We already
parse the manifests so look out any *_config files and if so, copy them, then
reference the copy from siteinfo instead. This has the advantage of also being
more deterministic.
[YOCTO #7101]
(From OE-Core rev: c8b7aad133c3e3319345d50f85a91cbd5116f842)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It makes us easier to see make clean failed.
(From OE-Core rev: c34d9e66a1a97952965128ab84c691202a60985b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
autotools.bbclass should respect CLEANBROKEN as it invokes 'make clean' on
configure.
(From OE-Core rev: ffbcb440c43e5e00e73ced67a2c888e9863a1d00)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the build doesn't support B != S, we can try running "make clean" instead
to try and clean up previous objects if the hash for the task has changed.
This tries to ensure that when variables like ${baselib} change, the changes are
correctly accounted for.
(From OE-Core rev: c2f761e2010857e2a2aad1dccf06ec39d15c1c86)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the recipe being built is listed first in BB_TASKDEPDATA (i.e. item
0) this is still valid and should not trigger an error.
(From OE-Core rev: 945c98969bcfe5516b89ac6dfbe4552fb5d68a48)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The change to handle SDKs of different types resulted in the signatures
becoming SDK specific which wasn't intended. Exclude the variable from the
hash values to avoid this.
(From OE-Core rev: add7b9cb20282f837c90a785f04ca690a9bbe87e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
odcctools-crosssdk doesn't use the suffixed naming the rest of crosssdk does
and this results in a annoying build warning. Avoid this.
(From OE-Core rev: b6b66f987168615598c980996a1692ca5753b4eb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if you try and switch between linux/darwin/mingw SDK builds in the
same TMPDIR, things break. This is due to sstate not reflecting the SDK_OS in
the manifest names.
Since they are different, reflect this in the manifest naming and allow
this to work.
(From OE-Core rev: 7a0e1233ba196797f5f9bf862685dfae5511e751)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have an open bug about the warnings issues in builds from an sstate
cache when something like glib-2.0 gets rebuilt. The issue is that
sstate is "clever" and prunes unneeded dependencies out the tree.
For example is X depends on pkgconfig-native but we've already build X
and installed it from sstate, it will not get installed when you build Y
which depends on X.
This patch changes the logic to match the sstate behaviour and prune out
unnecessary dependencies from the scope of aclocal. This in turn removes
the warning about missing manifest files.
The issue is that this patch exposes holes in our DEPENDS in recipes,
specifically that some native tools are not listed, specifically, and
problematically, pkgconfig, gtk-doc and intltool-native in particular.
I've sent out patches against OE-Core that address the bulk of the
issues there however I'm conscious this is probably going to a bug issue
in other layers and may be too annoying to consider at this point. The
other alternative is simply to turn the warning into a debug statement.
I appreciate the code below has commented blocks, this is simply debug
I've left around for now. It will be cleaned from any final version.
(From OE-Core rev: 6d2dc279faa8b28a00895dc6a620d80e2dbac685)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
head -n1 can be done using sed.
(From OE-Core rev: 38d50331acbc1e279449ae6b313ff0116b6c44e8)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The only reference to this function is a commented-out assignment, and nothing
in oe-core nor meta-oe uses autotools_set_crosscompiling directly. As it's
unused, remove it.
(From OE-Core rev: adaa0568390d0dfef1c4d87809601aab85299e97)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows them to co-exist together in the native sysroot, with one
set of cross tools per target architecture.
(From OE-Core rev: a2c5509520d5c3e082f55844e6545d0309565f8f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The autotools aclocal copy function should not depend on various variables, these
are accounted for in other parts of the system. Therefore exclude them.
This was causing differences in sstate checksums between different systems and meaning
the sstate cache wasn't being reused as much as it should.
(From OE-Core rev: b7193fadb1a53c86ffe4982a2fa9c1179a74de46)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Introduce a AUTOTOOLS_COPYACLOCAL variable which forces the copy of the aclocal
files even when a configure.ac/.in file isn't present.
Use this new feature in alsa-tools.
(From OE-Core rev: 07db5222a970e40bff51c5df793f0021b0e2aba8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We still occasionally see race issues with cp-noerror, and it copies
too many files, we should limit the the m4 files to those explicitly in
the DEPENDS for the recipe.
This change takes advantage of the BB_TASKDEPDATA data from bitbake to
only copy in those files listed in the manifest of the recipes in DEPENDS.
I've had this testing locally for some time, its ready for wider
review/testing.
(From OE-Core rev: 79ea036de331bde65a88fb777647dc099ef05acf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a Makefile.in.in has existed under ${S}/po/ and is read-only, cp will fail.
(From OE-Core rev: 6e1b17f19411ed897c53ae0ef41a2d2972a9c113)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some recipes may need to manually call the aclocal copying
functionality so factor this out into a function.
(From OE-Core rev: a5a08543c8cec43d993b2bba0ad6a9357c0a5e04)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- add EXTRACONFFUNCS variable in order to make it possible
to inject tasks after autotools_preconfigure
(From OE-Core rev: eafaeee58ab7a8f0613f54b8411f41ccefdf94c3)
(From OE-Core rev: d7950a25eda96a271aa6d541e03177d47e533f3f)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* some packages (e.g. uptime, cpu, forecasts, news from meta-efl)
don't have remove-potcdate.sin in po subdirectory, but Makefile.in.in
supplied by autotools.bbclass depends on it and fails without like this:
| make[3]: Entering directory `/OE/shr-core/tmp-eglibc/work/x86_64-oe-linux/uptime/0.0.2+svnr80477-r0.0/E-MODULES-EXTRA/uptime/po'
| make[3]: *** No rule to make target `remove-potcdate.sin', needed by `remove-potcdate.sed'. Stop.
| make[3]: Leaving directory `/OE/shr-core/tmp-eglibc/work/x86_64-oe-linux/uptime/0.0.2+svnr80477-r0.0/E-MODULES-EXTRA/uptime/po'
| make[2]: *** [uptime.pot] Error 2
(From OE-Core rev: 5a3116638394dc72c54cf5d4f8bd42a7be0b1768)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For builds that don't use gettext, config.rpath may not exist in the target
datadir. This change uses the native directory where it will always
be present due to gettext-minimal-native (which allows us to autoreconf
recipes using gettext even if we don't have gettext built).
(From OE-Core rev: 0ea24447842e6b76ccfee0881f557e1a82e89ef1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gettext m4 macros don't use the usual versioning/serial mechanism used by
aclocal. It therefore won't update them over and above any local version of
the macro. Equally, we don't run gettextize due to it doing slightly crazy
things to the build.
When we put the aclocal directory as a -I option to aclocal, if this was
found first compared to any recipe provided macros, the correct version
of the gettext macro would still "win". With the switch so correctly override
the system directory, older recipe provided macros may get used.
This patch manually removes the problematic m4 macros in the case we're using
gettext and need to use the correct m4 macros.
This patch also always ensures the gettext manipulations happen, even in the
-native case since missing or stale gettext files could cause build failures.
(From OE-Core rev: e9645d2bbeabaa5251d49edd659ab320fd66d0ee)
(From OE-Core rev: 841ea3c1c18e50e77fccbd5f44d6a79a50913b67)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous steps taken to address races over the aclocal macro directory and the removal
of files hasn't been sufficient since aclocal still looks at that directory as part of its
default search path. This patch passes the aclocal-copy directory into aclocal as its system
directory, removing any chance of it accessing the original aclocal directory.
Hopefully this should therefore fix the race issues once and for all.
In order to do this, cp-noerror needs to not error if the directory already exists.
Its also been noticed that aclocal defaults to using STAGING_DATADIR_NATIVE even when
building for the target. Only using the target directory would cause errors such as
missing pkgconfig macros (since we only depend on pkgconfig-native, not pkgconfig).
This patch processes both sets of macros maintaining existing behaviour. At a future
date we could look into potentially optimsing this.
[YOCTO #3216]
(From OE-Core rev: ad29b331e0d61708e68ef772cdb19154956fa67e)
(From OE-Core rev: f362cc419e5a480acd16c71c802636dbedc932d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit aa66ef6598c84231577d139ec7be413e73fac2b1 since
bdwgc-native fails to build after it. Anything which runs with a
sub-configure will fail after this change. It therefore needs
rethinking.
(From OE-Core rev: f95a9e2c292a1551861220270838cf1eaaba85b9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix autotools.bbclass to use relative paths for acpaths instead of
absolute ones. Since absolute paths may cause potential autoreconf
error like:
Can't exec "/bin/sh": Argument list too long ...
This error occurs while building coreutils with long TMPDIR, because
it has bunch of m4 files need to be expanded.
[YOCTO #2766]
(From OE-Core rev: aa66ef6598c84231577d139ec7be413e73fac2b1)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For reasons that are now shrouded in obscurity, autotools.bbclass
has long contained a special heuristic to avoid attempting to run
autoreconf when building autoconf or automake themselves. However,
the wildcard test against PN which is used there is problematic when
trying to build another package whose name happens to start with
"autoconf", and in any case it is silly to do this test at runtime
for every package. The individual recipes for autoconf and automake
can just as easily suppress the behaviour that they don't want by
providing a custom do_configure() method which just runs configure.
(From OE-Core rev: a87db6f8dea71cbb7ead9285ff8af0e28cf75604)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately whilst rerunning configure and make against a project will mostly
work there are situations where it does not correctly do the right thing.
In particular, eglibc and gcc will fail out with errors where settings
do not match a previously built configuration. It could be argued they are
broken but the situation is what it is. There is the possibility of more subtle
errors too.
This patch adds removal of the build directory (${B}) when configure is
rerunning, the sstate checksum for do_configure has changed and ${S} != ${B}.
We could simply use a stamp but saving out the previous configuration checksum
adds some data at no real overhead.
If we find there are things where we want to disable this behaviour with
CONFIGURESTAMPFILE = "" in the recipe, or users could disable it globally.
[YOCTO #2774]
[YOCTO #2848]
This is particularly helpful for eglibc and gcc which use split builds by default and
are a particular source of reconfigure type problems.
(From OE-Core rev: f15f61af77cc4e52a037f509f8e49e1ea530cf35)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When configure fails, it usually says "see config.log" yet nobody ever shares
the config.log file meaning the person trying to help invariably has to ask
for more information.
This patch dumps all the config.log files into the main bitbake log files when
configure fails, meaning all the information is present to help someone debug
such failures. It does make the log rather larger but this is preferable to
not having enough information in most cases.
[YOCTO #2463]
(From OE-Core rev: 7ad08f5b73aa949a877adc5641b4bb1d007de750)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we copy the aclocal directory to the build so that autotools
doesn't see .m4 files disappear when its processing them. This can happen
if for example, package X is being rebuilt at the same time as Y and it
gets uninstalled from sstate (assuming there are no dependencies between
X and Y). This code making the copy was added to avoid races but introduces
a race of its own, namely that the files can disappear during the copy.
This patch adds a cp-noerror script which silently ignores such errors
and gives the behaviour we need in this case. It hence fixes issues which
crop up for users and the autobuilder occasionally.
[YOCTO #2485]
(From OE-Core rev: 0f81fbc0df73675aeb79c724858799a3b6a02f85)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton
Richard Purdie
Markus Lehtonen
Andre McCurdy
Robert Yang
Jens Rehsack
Christopher Larson
Roy Li
Paul Eggleton
Matthieu Crapet
Constantin Musca
Martin Jansa
Wenzong Fan
Phil Blundell