Previously, if a file listed in SRC_URI was missing at the time of
parsing, and then was added and bitbake run again, it would not be
picked up because the recipe was cached without it. If we allow the file
to be added to the list of files to checksum, then it will be checked
for and found on the second run.
Fixes [YOCTO #4790].
(Bitbake rev: 71da822762cb298261cccdfa54b9c0fea02c3c5d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For a while its been puzzling me why connman-gnome rebuilds as often as it
does. It turns out you can trigger this with a new checkout of the metadata.
The SRC_URI that is causing the problems is:
SRC_URI = "file://images/*"
and rather oddly the results in checksums for a file "." being added to
the tree, e.g.:
('.', 'ab48a68186f0e0f277c21ef4cb390b4b')
The problem is that when iterating files lists, the checksum variable can
become set yet we don't break the out from the for loop, which leads to
odd (and non-deterministic) entries being added into the file checksum list.
The exact item added probably depends on the order of items on the disk.
Before this change, bitbake-diffsigs on connman-gnome:do_fetch would report:
This task depends on the checksums of files: [
('connman-signal-03.png', 'f6c16aee57b37b73793a2f1dea433ffa'),
('connman-signal-02.png', 'ad0cd22710c097d8174121fc1023c3be'),
('connman-signal-01.png', '8842bd83d2fa9ba56480df34c727c629'),
('null_check_for_ipv4_config.patch', 'a23271e41c9fe81551244d875106af10'),
('connman-signal-05.png', '808589e7e8d502b44c7b007e9e68d48c'),
('connman-signal-04.png', 'ab48a68186f0e0f277c21ef4cb390b4b'),
('null_check_for_ipv4_config.patch', 'a23271e41c9fe81551244d875106af10'),
('0001-Removed-icon-from-connman-gnome-about-applet.patch', 'e2d8269357c1e8c84291606da24eea85'),
('0001-Removed-icon-from-connman-gnome-about-applet.patch', 'e2d8269357c1e8c84291606da24eea85'),
('.', 'ab48a68186f0e0f277c21ef4cb390b4b')]
Afterwards:
This task depends on the checksums of files: [
('connman-signal-03.png', 'f6c16aee57b37b73793a2f1dea433ffa'),
('connman-signal-02.png', 'ad0cd22710c097d8174121fc1023c3be'),
('connman-signal-01.png', '8842bd83d2fa9ba56480df34c727c629'),
('null_check_for_ipv4_config.patch', 'a23271e41c9fe81551244d875106af10'),
('connman-signal-05.png', '808589e7e8d502b44c7b007e9e68d48c'),
('connman-signal-04.png', 'ab48a68186f0e0f277c21ef4cb390b4b'),
('null_check_for_ipv4_config.patch', 'a23271e41c9fe81551244d875106af10'),
('0001-Removed-icon-from-connman-gnome-about-applet.patch', 'e2d8269357c1e8c84291606da24eea85'),
('0001-Removed-icon-from-connman-gnome-about-applet.patch', 'e2d8269357c1e8c84291606da24eea85')]
which is correct and deterministic without the "." entry.
(Bitbake rev: f9416e76e272ba3249abff099f6f3a47fe82e03e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
if a task has a 'covered' indication, the list of tasks that
covered the task are computed and displayed. amended to add tooltip.
[YOCTO #5925]
(Bitbake rev: bb05ee13f53f10988579b6238802327732041d0c)
Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package count was incorrect because it was counting anonymous
packages. the full path of the image files was shortened to just
the filename.
[YOCTO 6087]
[YOCTO 6091]
(Bitbake rev: 06b190b2c23799bd2c9749be28e11bf5d59ed4fc)
Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add "on" before the date in the build status
* Get rid of the extra space before the "and" in the
build status
* Make the errors and warnings links in the build
status show the message content
* Make sure that the "Images" section in the left navigation
appears only for successful builds
* Link the number of packages installed to the "Packages
included" tab in the image information page
* Remove unnecessary inline styles in the dashboard
template
* Make sure target names in the h1 are listed in
alphabetical order
(Bitbake rev: 644a38e9a90728af52ebda9846d2037dd6831b41)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a known layout issue with Bootstrap tables in
Chrome. This change applies a css fix for it, and changes
the span classes in the variables table to improve
formatting.
(Bitbake rev: a7fee015b1cc34351d5ad8b854fc6bf368416400)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove a tag in all capitals
* Remove an unnecessary div
* Fix a typo
(Bitbake rev: 1ca139ca157d62cee9c48b22063e77614fa34325)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Link the number of errors to the #errors section in the
build dashboard
* Link the number of warnigns to the #warnings section in
the build dashboard
* Link the build time to the build time page
* Move some javascript that applies only to builddashboard.html
to that template from main.js
(Bitbake rev: 94c61d0d9ff24e0c781ea0a8e4bfea4c4ac94d4e)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the get_dict_value filter, there is the edge case where halted
builds can lead to IndexError errors in dictionary lookups, so we
need to catch those.
[YOCTO #6067]
(Bitbake rev: f6fcce974ce3b145bc472cd4e9721d56191828a4)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All help text strings have been reviewed by the
technical writer, and some of them by Paul Eggleton.
This patch implements their suggested changes.
(Bitbake rev: ce89530b178be2f3202d45523ef1340e00df05be)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the duplicated class attribute and the name
attribute.
Also, make sure that the row blue highlight works
without the name attribute when you land on the
tasks table after clicking the order link in a
task details page.
The commit also fixes a typo in default.css.
[YOCTO #6033]
(Bitbake rev: 471234f1ab1dbcd736a892720e99a305363db5ff)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some warnings and errors may come from a non-build context,
and they were not saved, even if they were counted for the current
build.
This patch saves these messages in memory until we have the
entire build context available.
[YOCTO #5642]
(Bitbake rev: fc7a74e7961775b5d7ff25298abed10138d24dc9)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We rename a local variable in as to prevent a conflict with
a similary named function parameter.
(Bitbake rev: f4e57f794651c4894600445e843ca9d5e104cd84)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure the REST API includes the latest changes
to the database schema.
(Bitbake rev: fb3d1d189f010488a8726872b01313857697751b)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When linking from a task order number to the All Tasks
page, automatically display the correct page for that link
anchor.
[YOCTO #5933]
(Bitbake rev: e5b6681432b627eb73bfa766d3154162206f374e)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This solves a problem of custom images which inherit a base
image with IMAGE_BASENAME overwritten in their recipe by a
different value than its default one: ${PN}.
The value of IMAGE_BASE causes a crash when hob will try to
create symbolic links to the resulting images from the deploy
directory, because it will look for names similar to
<original_recipe_name>-edited-timestamp-machine.rootfs.*
which might be different from the actual resulting image.
The solution is to simply overwrite IMAGE_BASENAME in the
custom recipe to the default value in the case IMAGE_BASENAME
is found in the base recipe.
Some recipes which were affected by this problem are those
from meta-fsl-demos (e.g.: fsl-image-test).
[YOCTO #6017]
(Bitbake rev: e42ee93519000f827be49659b6b5fb7717b3d592)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes a problem which happened when you tried to build an
image by selecting 'Start with an empty image recipe' from the
Image configuration page of hob.
The reason on of the bug was that the name of the resulting image
was threated the same way as ordinary custom images, when in fact
they should use the default name: "hob-image", because they do not
derive from any other recipe.
[YOCTO #6102]
(Bitbake rev: fa4ea3b4b40e7e9e6767e0cd51c6701e0af07135)
Signed-off-by: Marius Avram <marius.avram@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To find if a recipe is for an image, Hob checks if it inherits
image.bbclass. But when you add testimage in local.conf, this will
be added for each recipe, and it pass the test. Adding a "/" before
"image.bbclass", will check only for image.bbclass.
[YOCTO #6117]
(Bitbake rev: be8511c9d474c570f6ca7078e28919c8a5175a42)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you are using the testimage class then the old test mistook the
global inheritance of testimage.bbclass with the recipe inheriting
image.bbclass because it was only looking for that at the end of the
string.
Also tidy up the code so you an easily tell what it's doing. (The
original method may have been more "pythonic", but it does nothing for
readability.)
(Bitbake rev: b05e741cb5fe44b37538f2b727782f80dc9bb8fa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These were not being collected properly because we were explicitly
excluding variables defined as functions from being stored in the
database. We don't want these to be shown in the variables list, and in
any case it makes sense for these to be stored elsewhere, so create a
separate model to store these.
Fixes [YOCTO #6050].
(Bitbake rev: 0d76a5461ce4bd554ff70a465064969e53edf0a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5472]
Fixes [YOCTO #1973]
Created a new section called "Automatically Mapping Functions
Within the Context of a Class". This section addresses the
EXPORT_FUNCTIONS "operator", which was the last of the adjustments
to the variables bug against the BB manual (1973). The related
bug (5472) is a general bug against enhancing the BB manual, which
this change caps off.
The section here was reviewed and approved by Richard Purdie.
(Bitbake rev: cec33d4fdc05db3a41e978f3a1ab977730c443eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch makes sure that the setFeatures command is marked
as read-only and that it can only run if the cooker is in
the initial state.
Additionally, remove logging from the XMLRPC module in favor
of sending the exception to the client for easy processing.
[YOCTO #6089]
(Bitbake rev: f0a1a3e24757f7658d272035620465f92a3e4c3c)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provide for a secondary sort key based on the table's default
ordering when doing sort on alternate columns.
[YOCTO #5920]
(Bitbake rev: 1a0defce1499fdc320bcb27b41e06bea2ca2aef2)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO 6057]
For a package shown on the package build dependency page, the dependent
packages may be unbuilt packages, as indicated with the dependent
package's size set to -1. This fix changes the build template to use
the same formatting functions for unbuilt dependent packages as the
include package templates use for unbuilt dependent packages.
(Bitbake rev: b095ab30a827a50f66a06ac9170d33fae2670736)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The text now says that the package has not been built.
(Bitbake rev: 4b64f4452aa2da4dcc0491cefa6f1a07f7dd173f)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the search results form, add the btn class to the clear
search button and set its tabindex to -1 so that you don't
accidentally clear the search when you want to search
again.
(Bitbake rev: 1cd01dbf3cd59bac6b62fe91ba2bafa0c62fd7f1)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Increase the duration of the blue highlight animation
from 7 to 10 seconds.
(Bitbake rev: 0d48cec969a68f9b70e04be6d86b078df8f1ec5b)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apply the animation to any element with the class
.highlight
(Bitbake rev: b228739888cf8bac99da4aada3c040aac40f784d)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Capitalise correctly the label "Reverse runtime dependencies"
* Change dependency popover labels to match the rest of the
interface
* Make sure that dependency links go to the initial tab
of the installed package details pages
(Bitbake rev: 80df010c12f7ba19649a7bbda9d788217cabc57a)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove all trailing spaces from 'name' because they show up
in the filter headings, which I find incredibly annoying.
(Bitbake rev: 263eae9d2d7acf62240320765c80f60f3553f620)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Making sure the h1 of build.html shows "No builds found"
instead of "0 builds found" when a search returns no results.
This matches the builds table to all other Toaster tables.
(Bitbake rev: c8495c38b892d22a1f85286f34b0fdbc17febf78)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable the sort on files because it sorts on the file array's
first (and invisible) element. Disable the sort on values
because the raw ASCII sort looks wrong to the general user,
especially for values with leading spaces.
[YOCTO #6004]
(Bitbake rev: 800cbddd612c977960aa4dd93b24c22aac4bfae0)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Display task description as content of help bubble for a task.
[YOCTO #5748]
(Bitbake rev: 4ffc380d11cff4e1d32d2bf5fb6c7cda6f7e22e6)
Signed-off-by: Ravi Chintakunta <ravi.chintakunta@timesys.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch replaces faulty timezone detection with a version
that simply reads the TZ environment variable if it is set.
If the TZ is not set, we do a reverse match search among known
timezone definitions and take the first match.
[YOCTO #5499]
(Bitbake rev: 3a0a556a65368f02635606e4eb707ca08e25007a)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is an update on the sstate file saving data.
It saves both found and missed sstate tasks.
(Bitbake rev: 60c577b1080219b795d3c8ab4e149e929cf9ce14)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The first part of the sstate code checks en-mass whether given checksums
are available. The next part of the code then either triggers those
setscene tasks either running them or skipping them if they've been
covered by others.
The problems was that this second part would always skip a task if it
was unavailable in the first part, even if it would have otherwise been
covered by other tasks.
This mean the mere presence of an artefact (or lack of presence) could
cause a different build failure.
The issue reproduces if you run a build and populate an sstate feed, then
run a second build off that feed, then run a third build off the sstate
feed of the second build (which is reduced in size).
The fix is rather than immediately skipping tasks if the checksum is
unavailable, create a list of missing tasks, then, if that task cannot
be covered by others we can skip it later. The deferral makes the
behaviour the same even when the cache is "incomplete".
[YOCTO #6081]
(Bitbake rev: 5edb1a3e3f454ba6e65551174d86229db2f99636)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a setscene task has [depends], its possible they may still get executed out
of order. The issue is that the dependencies are set to set() for all tasks
involved. This patch adds back in explict dependencies within these chains
to avoid the setscene task failures.
[YOCTO #6069]
(Bitbake rev: 724c889eed3b03d3199810c185086d3973af826c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5357]
Added a paragraph at the end of this section to address the fact
that the user can now debug Bitbake's processing of signatures.
This introduces the -S bitbake option and the fact that the
user can provide a couple parameters with it: "none" and
"printdiff".
(Bitbake rev: 4093fa6c96eebe0bbafb93dc27d8a978cca436c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new -S syntax is in there now.
(Bitbake rev: 5a406a69c14b6ddf179fea2c4bc68cddf9eddeea)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than passing featureset around various places where the data doesn't
really belong, run a command at connection time to set the appropriate
features. This is similar to what the process server does.
(Bitbake rev: c3b5cc5691291c74dd315c4439c80e0e4b2b5c1d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The connection may have failed before the event queue has been setup.
Handle this correctly in the exception handler.
(Bitbake rev: db4d80b5c2d32117cdf06333b9627202998b1512)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We remove trapping SIGCHLD due to a weird interaction
with the bash version used with Ubuntu 14.04 LTS.
(Bitbake rev: 59f2f33440449c586c23dd3a192698a37aaf0595)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We shouldn't immediately remove the pid file when stopping the server, if we do, this
causes a traceback within the server itself which can then hang. Fix this by removing
the stale pid file as the last thing we do.
Also:
* don't printing a new "waiting" line every 0.5 seconds.
* make the loop more granular since the user can 'feel' the 0.5 seconds
[YOCTO #5984]
(Bitbake rev: 81f41a806aeddcc38992163557672e296bcbc967)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the featureset didn't match the defaults, we'd pay the price of two
base configuration parses which showed up adversely in the performance
benchmarks. This also passes the feature set into the cooker creation so
in the common case we don't have to reset the server. This speeds up
both knotty and hob startup. If the featureset doesn't match, the system
will reset as before, this just streamlines the common case.
(Bitbake rev: 1249543c4dbf3edeac033d888497864cfc807a4e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the change to more optimal default featureset behaviour, a race was
exposed by hob where the code may try and change self.data before it
exists. This change avoids that.
When the datastore is created, the cooker configuration is used so
data tracking is correctly handled regardless.
(Bitbake rev: 9d8f7efbc39d64124936ccaeb3c47a112e595d78)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adjust the filter for task cache attempts to include all attempts except
SSTATE_NA.
[YOCTO #5923]
(Bitbake rev: b1f52a87e367b8dea9bd974bc5a886d84d839c45)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO 6036]
In the page that shows the directory layout for an image, if the
directory is empty, then the directory folder icon should be black and
the table row should not be 'expandable' on a mouse click. That
behavior depends on the directory's child entry count calculated in the
view function controlling that page.
Two images in the database with the same directory path in the target
image, but one with path having entries and the other not having
any entries caused the path without entries to be clickable; the
query for a directory's count of entries, didn't filter on the image id,
only on the path.
(Bitbake rev: 964d2d6efe9a2cfa7cd8760cda4453c3d69b2e27)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file types are displayed in the Outputs column in the build page. The file types
are derived from the target image filenames.
[YOCTO #5947]
(Bitbake rev: 842abf6759894690d5bc770f4ea2ac15b127e5e2)
Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Richard Purdie
Farrell Wymore
Belen Barros Pena
David Reyna
Alexandru DAMIAN
Marius Avram
Cristiana Voicu
Scott Rifenbark
Dave Lerner
Ravi Chintakunta