Currently we stash the libgcc install tree and then reuse that
to populate libgcc recipe later. This mechanism does not work
for gcc 4.7/trunk since now libstdc++ needs access to build tree
of libgcc. This patch stashes the gcc-cross build tree
and then reuses this in libgcc as well as in gcc-runtime
recipe builds.
Now we build libgcc in the libgcc recipe instead of just
using the prebuilt install tree
core-image-minimal build/run tested on all qemu machines
(From OE-Core rev: 7cf9f0597648c0bdaa080976d74acfbfc4c8443d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building gcc-cross-canadian libgcc is built using
headers from gcc-crosssdk and not the target sysroot
because we do not pass proper CFLAGS for target bits
so it ends up using CFLAGS that were meant for compiling
canadian gcc itself. It does not show up as a problem
when building SDK with eglibc because eglibc-nativesdk
and eglibc have identical headers. The problem shows
up clearly when you try to build uclibc based meta-toolchain
since then nativesdk libc and target libc are different
(From OE-Core rev: 0e904103e9bd7fdb31bfcc129067511f9f45701b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Usually they should be same if not defined to be different
by user. In this case if I override GCCVERSION in local.conf
then SDKGCCVERSION will also follow the suite.
(From OE-Core rev: 1f9c07d8a086a3dc3bb68eaabd56a1b1730306ff)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have currently no override to detect a recipe being build cross, crosssdk
or for target at times we can use virtclass-native and virtclass-nativesdk to
override stuff in recipes but we dont have way to modify a variables
based on recipe type always.
This patch adds in such an override and in particular makes a target override
class available.
With this change now we can say:
EXTRA_OECONF_class-target = "...."
EXTRA_OECONF_class-native = "..."
EXTRA_OECONF_class-nativesdk = "..."
EXTRA_OECONF_class-crosssdk= "..."
Based of an original patch by Khem Raj
(From OE-Core rev: cf332fd9bf685f6d42b11c1f0c37b934c7f5bcbe)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* also use weak assignment for SDK_NAME_PREFIX as suggested by khem
* TUNE_PKGARCH is not 100% right too, because such SDK image usually has few
machine specific packages included (e.g. base-files, securetty, opkg configs)
but those are not important for SDK users so it's better to have one SDK for
whole e.g. armv7a-vfp-neon then 6 SDK for each machine which would work the
same.
You can see diff between crespo and om-gta04 SDK here:
http://build.shr-project.org/shr-core/sdk/oecore-i686-armv7a-vfp-neon-toolchain-efl-crespo-om-gta04.diff
(From OE-Core rev: 5a1f172d35be610688842a8a9a84f24edb9aeb51)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The location where xev was located didn't contain xorg-app-common.inc,
but still xev requires it. So moving it fixes that issue.
* File checksums and License checksums were also added.
(From OE-Core rev: 764bc41950513bede2ff763d0db55961f00318da)
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While building on distros like fedora17, which has /bin/perl,
the target perl scripts get perl path also as /bin/perl.
And that is not correction path of perl on the target.
This commit avoids this error.
| error: Failed dependencies:
| /bin/perl is needed by quilt-0.51-r2.i586
NOTE: package core-image-sato-sdk-1.0-r0: task do_rootfs: Failed
ERROR: Task 8
(/home/nitin/prj/poky.git/meta/recipes-sato/images/core-image-sato-sdk.bb,
do_rootfs) failed with exit code '1'
(From OE-Core rev: f091895d7dacd601f52edb0f0a08bdfa7e6d2461)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change ensures we use the user-config.jam Configuration
that we created and will not use anything from the user's home
directory.
[YOCTO #2302]
(From OE-Core rev: 555f2fc374728b3b379f2ad59c8c5fc34aeb194a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified the uclibc PACKAGES list order to ensure the uclibc-dev package is
processed before uclibc-staticdev to allow *_nonshared.a libraries to be
packaged in the uclibc-dev package. The *_nonshared.a libraries are required
by the SDK.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License hasn't changed, just updated the md5 checksums due to trivial
date changes within the text (and the position of the license text
within png.h).
Addresses CVE-2011-3045
Fixes [YOCTO #2352]
(From OE-Core rev: a2009fd8548d818c4e647dae554b98074bd3eecd)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sunaudiodev module is sunos specific so we avoid a warning by not.
adding this module to missing variable.
[YOCTO #1937]
(From OE-Core rev: a92847ed7671386225c0738d62780a9f1b043789)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
_tkinter module needs tk module along with tcl. tk is not yet integrated
in yocto so we skip the check for this module.
Avoid a warning by not adding this module to missing variable.
[YOCTO #1937]
(From OE-Core rev: 3f1be431054b3947bee9a2503eea1a3cefb38f4c)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
_bsddb module can be built only with db version between 4.1 and 4.7.
Avoid a warning by not adding this module to missing variable.
[YOCTO #1937]
(From OE-Core rev: d974ad03c58d7a221ebe3d59c57607928fbbd435)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python should search for db.h in inc_dirs and not in a hardcoded path.
If db.h is found but HASHVERSION is not 2 we avoid a warning by not.
adding this module to missing variable.
[YOCTO #1937]
(From OE-Core rev: 79d0332f21769338a9f904308d8a808486e10fea)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch was added for 64bit host machines. In the compile process python
is checking if platform is a 64bit platform using sys.maxint which is the host's
value. The patch fixes this issue so that python would check if TARGET machine
is 64bit not the HOST machine. In this way will have "dl" and "imageop" modules
built if HOST machine is 64bit but the target machine is 32bit.
[YOCTO #1937]
(From OE-Core rev: 4993f50744882ee384cb8fb106ad209f0d887b3f)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* depmod already gets executed by pkg_postinst_kernel-image.
* If you build a module using module.bbclass, pkg_postinst returns 1 in
do_rootfs, causing pkg_postinst to run again on first boot. To improve
this situation, I copied pkg_postinst from kernel.bbclass to module.bbclass.
This was rejected by Koen, because he doesn't like the code from
kernel.bblcass, which uses ${STAGING_DIR_KERNEL}. Richard then suggested
that calling depmod during do_rootfs wasn't necessary at all, because
it already gets done by kernel-image.
(From OE-Core rev: c7809c03080925b5e9171df5c9175c7c6420b376)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* indentation was with spaces and tabs, unify to use tabs instead of
spaces, for shell code and populate_packages_preppend,
because "python populate_packages" expects tabs (or 8 spaces)
* and use 4 spaces for anonymous python
(From OE-Core rev: 24472a794e1787ebcd700dde66018a31069aa50b)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* allows to detect ENTRYPOINT from kernel binary marked with UBOOT_ENTRYSYMBOL
used e.g. by ben-nanonote
(From OE-Core rev: 9ce6bd1d58b4418d3a53be417c18a0e57314462a)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For example, pseudo-native wants to set LD_LIBRBARY_PATH but setting this
into the environment here causes the existing pseudo (running during do_install)
to poke into paths in /opt and this breaks builds.
The simplest fix is simply not to do this. Comments tweaks to match the code.
(From OE-Core rev: 1efa999ed02186c9c58cb48418e0c62ecdc82ac7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport a fix from 1.16.x upstream to use fd instead of stream-based
I/O in dpkg-deb, which avoids the use of fflush() on an input stream
(the behaviour of which is undefined by POSIX, and appears to have
changed in the version of glibc introduced in Fedora 16 and presumably
other systems).
Fixes [YOCTO #1858].
(From OE-Core rev: 2aefac2a2c508da11a73e29d82947ac627d31118)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows iso images to be written to usb keys and booted on systems which
have a BIOS which support this. There is no real down side to tweaking the iso
images in this way.
[YOCTO #1763 partial]
(From OE-Core rev: 9a946554e4843841c2ec3cbb2575e80d0ccdc29f)
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove /etc since it is empty, when creating a machine that does not
deliver any module config files, the /etc is empty and is then warned
about not being shipped, so we remove it.
This occurs in the routerstationpro with the following warning:
WARNING: For recipe linux-yocto, the following files/directories were installed but not shipped in any package:
WARNING: /etc
(From OE-Core rev: 963742f5a9bce2dfedd58350af754d256e2211cb)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
patch.bbclass orignally pointed at /usr/bin/quiltrc for an empty
version to ensure that no user setting were picked up, change this
to /etc/quiltrc in the Native sysroot since we now have a native
sysconfdir.
Make sure that the quiltrc is actually installed in the Native
sysconfdir, not the target, so fix this after the recipe split.
(From OE-Core rev: 1af73900cea82e63fb0f94e6f057144f723146ec)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe gcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/include
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config/arm
WARNING: /usr/lib/gcc/arm-poky-linux-gnueabi/4.6.4/plugin/libgcc/config/arm/bpabi-lib.h
(From OE-Core rev: aff48c514174ba5fa3bb1e5df5293376b567da09)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe xserver-kdrive, the following files/directories were installed but not shipped in any package:
WARNING: /usr/share/man
WARNING: /usr/share/man/man5
WARNING: /usr/share/man/man1
WARNING: /usr/share/man/man1/Xephyr.1
WARNING: /usr/share/man/man1/Xserver.1
(From OE-Core rev: 93bd303d4af91769ae943841036a1b956ac2e940)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe libgcc, the following files/directories were installed but not shipped in any package:
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ecrti.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ncrti.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ecrtn.o
WARNING: /usr/lib/powerpc-poky-linux/4.6.4/ncrtn.o
(From OE-Core rev: b17c02d223455680324227f8de17feb8ab3e7b68)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
WARNING: For recipe binutils, the following files/directories were installed but not shipped in any package:
WARNING: /usr/bin/embedspu
(From OE-Core rev: 447d77b9e33a68f748c96a152eae19148e43ed7c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not enable alsa in bluez4 unless it's included in DISTRO_FEATURES.
(From OE-Core rev: 36e434ecd05754d8c99d416f706da4a1b11b729e)
Signed-off-by: Jonas Danielsson <jonas.danielsson@lundinova.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bdwgc recipe uses a version of libatomic that fails when building in Thumb
mode. This has been fixed upstream already. The
pulseaudio/libatomics-ops_1.2.bb has the same issue and sets the
ARM_INSTRUCTION_SET to "arm" (probably until a new version gets pulled in).
This patch applies the same workaround to the bdwgc/bdwgc_20110107.bb recipe.
(From OE-Core rev: a648afcdd045a38d3c6729499a48ab7212a0b3c3)
Signed-off-by: Ken Werner <ken.werner@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Is it possible to enable the "-sm -accessibility" in oe-core, please?
There is a meta-kde layer which requires the "-sm -accessibility", but
they are disabled in meta/recipes-qt/qt4/qt4.inc:
QT_DISTRO_FLAGS ?= "-no-accessibility -no-sm"
I checked the log of the qt4, can't find the related log for
"-no-accessibility -no-sm".
Another way is use the bbappend, but it would be great if it can be
enabled in oe-core.
This only enables for qt4-x11, doesn't enable for qt4-embedded, and
have done testing on: qemux86, qemuarm, qemumips, qemuppc.
(From OE-Core rev: 678973a9ad258b466295a666cbcd56df15a57c7c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With PARALLEL_MAKE set to 14, I frequently see the gthumb do_install
task hang. Make is spinning at 100% CPU and the build makes no
more progress.
The following work-around proposed by Richard Purdie allows progress
to be made.
(From OE-Core rev: 01e14ae25c133e46603d01a72d0372c111e12f11)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Joshua Lock <josh@linux.intel.com>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use update-alternatives and sync to the way the replace kbd package
does things. Using update-alternatives ensures that the proper provides
are setup in the packages.
(From OE-Core rev: 9c2aa2da7cb9ceec02c5d42d18a623a51f922cea)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change to use ALTERNATIVE_LINKS from update-alternatives. This ensures
the links are created consistently and the package provides are
correct.
(From OE-Core rev: 728569a3db005a935e6b08d6aac3e23e88d486df)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch to using the update-alternatives class. Need this for
consistency and to ensure the necessary package provides get set.
(From OE-Core rev: e0626a0270fb0f4ff128e761c13d44162723434c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change to using update-alternatives to ensure that we're consistently
using the class, and the package provides are being setup properly.
(From OE-Core rev: be2dbd1abfb4e0e6989d1c34c09047e439d8194e)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch to using ALTERNATIVE_LINKS to ensure the update-alternatives are setup
properly, along with the package provides.
[RP: Fix links so as not to need the bbclass changes]
(From OE-Core rev: cb27e78bfc059d6878dcda8b7a27a078f7a871e4)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch to using ALTERNATIVE_LINKS to ensure the update-alternatives are setup
properly, along with the package provides.
(From OE-Core rev: 9f44708774cdcf623700b336d5a3a7bc40f91f0a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch to using update-alternatives, this ensures that the
call to update-alternatives and package provides are correct.
(From OE-Core rev: a9b046297c10ca2b2368012803cd719ff59292d7)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* defconfig, init.sh, wpa_supplicant-0.5.7-always-scan.patch,
wpa_supplicant-fix-deprecated-dbus-function.patch and
wpa_supplicant_default.conf are not used by the recipe.
* default-sane gets installed but is unused.
(From OE-Core rev: 740b5baa511b40ee7bc3050770b6d5102e00f8f5)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Those fixes are required to get the test scripts to work with current
0.79 DBus API.
(From OE-Core rev: 0d6abd0ff634604cdde2b80f625d6ca2a015948a)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes errors like below
/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc/sysroots/x86_64-linux/usr/libexec/armv5te-angstrom-linux-gnueabi/gcc/arm-angstrom-linux-gnueabi/4.6.3/ld:
error: hidden symbol '__start___debug' is not defined locally
/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc/sysroots/x86_64-linux/usr/libexec/armv5te-angstrom-linux-gnueabi/gcc/arm-angstrom-linux-gnueabi/4.6.3/ld:
error: hidden symbol '__stop___debug' is not defined locally
collect2: ld returned 1 exit status
make[1]: *** [plugins/loopback.la] Error 1
(From OE-Core rev: 0bc79de634841c57868be3d7d8b0fd8bf47ccc18)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes the following Augeas configure error.
| checking for LIBXML... no
| configure: error: Package requirements (libxml-2.0) were not met:
|
| No package 'libxml-2.0' found
|
| Consider adjusting the PKG_CONFIG_PATH environment variable if you
| installed software in a non-standard prefix.
|
| Alternatively, you may set the environment variables LIBXML_CFLAGS
| and LIBXML_LIBS to avoid the need to call pkg-config.
| See the pkg-config man page for more details.
| ERROR: oe_runconf failed
(From OE-Core rev: 72edbba1ad212986be74aaa15eb9c785c6456d30)
Signed-off-by: Martin Donnelly <martin.donnelly@ge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed already upstream patch:
automake/automake_1.11.2_fix_for_pkglibexec_SCRIPTS.patch
Rebased these patches to the newer code:
automake/prefer-cpio-over-pax-for-ustar-archives.patch
automake/python-libdir.patch
Changed the tarball name from bz2 to gz, as the bz2 tar ball
is not published for the 1.11.3 version.
[RP: Fix python.m4 to preserve the tweaks that allow us to build python modules]
(From OE-Core rev: 94bf72aeae035ffade75bd9343937888bbb09c82)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* No changes other than source checksums and PR at recipe level.
* DEFAULT_PREFERENCE still set to -1
(From OE-Core rev: 6a21cf0068234152b3f13866dc7c05adc6d0d9c9)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xcb-util was split into separate packages in the 0.3.6 -> 0.3.8 transition.
This library was previously provided by xcb-util and is now a separate package.
(From OE-Core rev: 7703a00515b3cc8f7d3855cf3654ee243ef7b146)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xcb-util was split into separate packages in the 0.3.6 -> 0.3.8 transition.
This library was previously provided by xcb-util and is now a separate package.
(From OE-Core rev: b554e29f356e3af27beaffb5b538265d010cd08e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xcb-util was split into separate packages in the 0.3.6 -> 0.3.8 transition.
This library was previously provided by xcb-util and is now a separate package.
(From OE-Core rev: e93c121b66f689df98b953b164abc4bd61351e37)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xcb-util was split into separate packages in the 0.3.6 -> 0.3.8 transition.
These libraries were previously provided by xcb-util and are now a separate package.
(From OE-Core rev: ee488dd2c33bb3f2818f28bd5db670f09d53ce1f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Xcb-util was split into separate packages during the 0.3.6 -> 0.3.8 transition.
Update xcb_util.inc to reflect that by removing the older packaging.
Libxcbatom, libxcbaux and libxcbevent are merged into libxcbutil.
Libxcbicccm, libxcbimage, libxcbkeysyms and libxcbwm are now separate packages.
Libxcbproperty and libxcbreply were made obsolete with this commit:
http://cgit.freedesktop.org/xcb/util/commit/?id=81c62e7a04213abefa1ea82819887aaaa3c31a74
(From OE-Core rev: da4a2d49cd1674eddef80c58e5f2effc0035e477)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Judge if "SanityCheck" event is received, it will issue the
sanity_check() and send "SanityCheckPassed" back if succeeded.
(From OE-Core rev: 19704f9e69ecf09531687385b478b47f49fe372d)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bump PR value due to the commit
c6c701f424aeb502d20ff02d02712e56f4e259a5.
(From OE-Core rev: b6ee2880fccf04923ede31256ea418451cbf2e46)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's useful for Hob to be able to disable the sanity checks completely
without marking them as passed so that the user can get into the GUI to
configure their settings, etc.
Add a variable, DISABLE_SANITY_CHECKS, to do so.
(From OE-Core rev: b022641f939bcfcdaddddc4db3af4d2dc70de832)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The move of libcrypto to /lib instead of /usr/lib has broken the _hashlib module
compilation. There were also a number of other failing modules which should
have been building correctly. This turned out partly to be the /lib issue
but also due to a number of native paths creeping into compiler commandlines.
These changes add in /lib as part of the searh directory and remove
a number of host contamination issues within setup.py. Post release we
should really further go through this file and just delete large sections
of it as its hard to be sure what strange paths python is injecting as
search paths.
This patch also fixes issues where re-execution of the compile task
would corrupt the Makefile in various ways, again leading to puzzling
paths within the configuration.
(From OE-Core rev: 20e2761e1da1cb5dcd267e161f2a6b6a429e9f39)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are issues with the current unionfs when making a union mount over "/".
Until these are resolved we can't use unionfs for live booting so disable this
temporarily as a workaround.
unionfs is usable in other circumstances.
[YOCTO #2331 workaround]
(From OE-Core rev: 60ee26ae23132b916019d58e20b8c2e1ddd2b471)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -nativesdk pseudo wrapper setting LD_LIBRARY_PATH turned out to be a
bad idea since it can mix up different libc and lib-dl verisons which
may or may not work depending on the phase of the moon.
As an alternative to solving the original problem, this patch drops the
symbol version requirement on memcpy which allows pseudo to work with
libc's back to 2.7 which should be sufficient for our supported targets
using nativesdk.
[YOCTO #2299]
[YOCTO #2351]
(From OE-Core rev: c6c701f424aeb502d20ff02d02712e56f4e259a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel modules are not marked as executable but we do expect to strip them.
This patch adds in missing code to ensure we do this. Without this images
are getting sigificantly bloated in size.
(From OE-Core rev: 00b0a5f2f51bb3f88bbb9ae558c2859e3c1c406c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In particular, this overwrites the value from cross-canadian.bbclass in
some cases which isn't the desired behaviour and unnecessarily
complicates/breaks the dependency chain.
(From OE-Core rev: 751ead4fa7d4120de906a1d9cb1d5a29357bebad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fix addresses various issues seen in qemux86-64 images:
* scroll bars in matchbox-terminal not working
* files not appearing in pcmanfm
* warnings on the console from glib/gobject about invalid gdouble values
Its due to an emulation issue in qemu which the backported patch fixes.
I managed to debug it to a specific function, Khem found the qemu patch
to backport, thanks Khem!
[YOCTO #1906]
(From OE-Core rev: 69d083f8b8d8f7d095ed5682d305870c4d93fe62)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For beagleboard platform, the PACKAGE_ARCH for certain recipes is
"armv7a-vfp-neon", however, the architecture label in RPM file name is
"armv7a" due to a potential bug in RPM backend.
This commit is a workaround to make Hob work in this case.
(From OE-Core rev: 00bd4589b21fe3a716ff2732ea55651c4abd77e4)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We call re.sub here, so we need to "import re" or an error occurs
(tested on OpenSuSE 12.1).
(From OE-Core rev: cb1f7cffc171e6b182f33a69ff688d76b7f1baed)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Any trailing whitespace needs to be stripped before comparing it to the
SANITY_TESTED_DISTROS list.
(From OE-Core rev: bea0311a6478febe8ab4884fb1c479f610856534)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows libzypp to successfully build when x11 is not in
DISTRO_FEATURES (avoiding the libzypp -> libproxy -> gconf -> gtk+
dependency chain which without X results in gtk+ failing at
do_configure).
Fixes [YOCTO #2320].
(From OE-Core rev: 973351cf2e338f07c11395d494193e9c62857f2d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous postinst script was not working for images which use
RPM because do_rootfs could allow qemugl to be installed after
libgl1, and the postinst needs to run after libgl1 is installed.
Hence, it's being changed to run at first boot instead of during
do_rootfs.
(From OE-Core rev: dc0fe3fbf9ca862c1d0d90468e6da326f58e3b41)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove BB_NO_NETWORK because we can not guarentee that all
downloads will be available in the self-hosted image for
the possible targets being built. If this image is run with
out networking, failures may be seen and BB_NO_NETWORK
should be set via the Hob
Update the Poky SRCREV so it has the latest set of fixes and
patches.
(From OE-Core rev: 70541d5e82ee05289eb0095bed4b121d12a00729)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The lsb package is needed to enable the distro checking
in the self hosted image. Currently there is no standard
identification in the self-hosted image so use the existing
lsb package which provides lsb_release that parses the
/etc/release file
(From OE-Core rev: 1373865ce7f205a8e63f42caf436e9e2f7a565f5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the DISTRO* fields to the /etc/lsb-release file so the distro
parsing code can find standard information about the Poky Distro
when using the Self-Hosted Image.
The lsb_release command uses getopt which is provided by util-linux
(From OE-Core rev: eddb1d6f458bcf8b0473a360fad3f4a259a57d28)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREVs to pickup the following meta change for the
3.0 and 3.2 kernels:
[
meta: Clean up BSPs kernel config
Clean up some QEMU and non-x86 BSPs kernel config, including
qemuarm
qemuppc
qemux86
beagleboard
mpc8315e_rdb
Only obsolete/invalid kernel configs are removed.
(From OE-Core rev: 1f68d624c109c3f31a6f2f6106b5ef56e3d9a166)
Signed-off-by: Yang Shi <yang.shi@windriver.com>
]
With this commit, the configuration audit for the qemu and hardware
reference boards is (largely) warning free.
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV for both the 3.0 and 3.2 kernel trees to
pickup the beagleboard xM boot fix:
[
meta/beagleboard: disable CONFIG_PREEMPT
The boot hangs with the message:
mmc0: error -110 whilst initialising SD card
The MMC driver has issues initializing when PREEMPT is enabled (either forced
or voluntary). Unplugging and then plugging the card back will reset the
driver and continue booting. Alternatively, disable preemption.
]
[YOCTO: #1892]
(From OE-Core rev: 36e9e6a88bc4436efefd4a25c0a58be75f887142)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In fixing an existing patch migration bug, the list of valid extensions
got out of sync from the core patch class. As a result, valid patches
were not being applied to the tree.
Updating the tools to migrate .diff files fixes the issue.
Also in this fix is the removal of .patch in the find_sccs() routine, since
it will never be returned by patch.bbclass when all non-patches are
requested, it is simply confusing.
(From OE-Core rev: 0ade3f26f40b67d7296725b1e956c46be9a86089)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update-alternatives was pointing to matchbox-session, and should have
been pointing to matchbox-window-manager.
(From OE-Core rev: 9c08dcf468fd41897627d9efc650c74f8f5d8ed0)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sz, sx and sb links were created incorrectly to lrz, they should
point to lsz.
(From OE-Core rev: 663b608357b86aba5cdf7f07291893725e579b75)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an error when build meta-toolchain-sdk on Ubuntu 10.10:
| Installing NATIVESDK packages
| Processing task-sdk-host-nativesdk...
| Processing task-cross-canadian-mips...
| error: Failed dependencies:
| libcurl.so.4 is needed by qemu-nativesdk-0.15.1-r5.i686
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
ERROR: Task 21 (/buildarea2/lyang1/poky/meta/recipes-core/meta/meta-toolchain-gmae.bb, do_populate_sdk) failed with exit code '1'
This is because qemu would depend on curl if it happened to be
available at build time and could confuse the -native and -nativesdk
librbaries.
[YOCTO #2305]
(From OE-Core rev: 566ad643efd03db34b59a427f48ca55ce613cf89)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the sanity tests fail, we still were writing out the stamp which means
they'd get skipped the next time we run bitbake. This is clearly wrong
and we should only write out the stamp file if the sanity tests complete
successfully.
(From OE-Core rev: b99acaa8aa06dcbca46c3f7048124d6f8d643a8b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After building perl package, re-execution of compile task recursively
substitutes the path, making it an invalid path.
Fixed to prevent recursive substitution.
Similar case as [Yocto #2194]
(From OE-Core rev: 16542d982d86d42d3189d47a8180f0f71646a9ca)
Signed-off-by: Venkata Ramana Gollamudi <ramana.gollamudi@huawei.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* update-rc.d wasn't executed when the rootfs was built, because
pkg_postinst_avahi-daemon exited early. It wasn't run either
on first boot, because the exit code was 0.
(From OE-Core rev: c084759d7f69b751e1ed3ef79d686389d867f248)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The value of PARALLEL_MAKE shouldn't affect sstate checksums. In general it
doesn't as the value is injected as a task override and the sstate checksum
doesn't track these. That isn't the case for linux-yocto in particular so
adding it the list of variables to ignore is useful.
(From OE-Core rev: a0fbbd7ba979b8aaee701e0997115f89b361b920)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The generated parser had warnings regarding signess and return check
which makes Linux Kernel's perf tool from 3.4 release to fail without
those patches.
(From OE-Core rev: f3d7197252d1ede627a561fbd5b3b7fb759bf75b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes a segfault in the properties application when connecting to a WiFi
service succeeds.
(From OE-Core rev: 767ec69e6ca633e5bde604241a598147075b1ac0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /usr/bin/perl
Fedora 17 also has /bin/perl
this causes automake-nativesdk build on such distros to put perl
interpreter path in the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by automake-nativesdk-1.11.2-r2.x86_64
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
The second sed command is for such a case:
eval 'case $# in 0) exec /bin/perl -S "$0";; *) exec /bin/perl -S "$0" "$@";; esac'
This line has two "/bin/perl" and we can't use a line number to tell
sed which line it is since the line numbers in different files are
defferent.
[YOCTO #2304]
(From OE-Core rev: ee7a86c06c2289f01aa5f1da958ce51523495572)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /usr/bin/perl
Fedora 17 also has /bin/perl
this causes autoconf-nativesdk build on such distros to put perl
interpreter path in the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by autoconf-nativesdk-2.68-r6.x86_64.rpm
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
The second sed command is for such a case:
eval 'case $# in 0) exec /bin/perl -S "$0";; *) exec /bin/perl -S "$0" "$@";; esac'
This line has two "/bin/perl" and we can't use a line number to tell
sed which line it is since the line numbers in different files are
defferent.
[YOCTO #2304]
(From OE-Core rev: 393908e53b243b16ab984da7f073be371e062946)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /usr/bin/perl
Fedora 17 also has /bin/perl
this causes glib-2.0 build on such distros to put perl interpreter path in
the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by libglib-2.0-utils-2.30.3-r0.ppc603e
NOTE: package meta-toolchain-gmae-1.0-r7: task do_populate_sdk: Failed
[YOCTO #2304]
(From OE-Core rev: 13e6e316d751d0ea3107d5547f6bdd2b74919cad)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The perl recipe's do_configure() does some manual sed replacements over
the entire WORKDIR. Fix the following issues with this:
* Skip patches, which fixes re-execution of do_patch after do_configure
has run once
* Ensure that the replacement operation does nothing if do_configure is
re-executed
* Avoid unnecessarily modifying /usr/include paths within documentation
that will end up being packaged
* Fix a quoting issue in the expression used in the grep command that
ended up causing files that did not contain .*\.h after /usr/include
to be matched and modified.
The files modified during do_configure have been compared before and
after this patch to ensure there are no unexpected changes. Some
/usr/include paths that are not within documentation are no longer
being substituted however these are all within comments or scripts for
other Unix operating systems that are not applicable.
[YOCTO #2194]
(From OE-Core rev: 19255032e7744fce5cbe466e4869ded378d3b4f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix for a minor type in DESCRIPTION
(From OE-Core rev: 25a997ca9b24d9265b62717fd01ebb26e7d21bba)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The require of core-image-minimal overrides the description.
The best fix for this would be conditional setting of DESCRIPTION
in the required images for all image descriptions, but that opens
a potential can of worms. Moving the require fixes this.
(From OE-Core rev: 0bd5f0a86370881b4eb2455df21b0575f6ffd008)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was found to cause issues on the Yocto autobuilders and fixes do_compile
failures when guile-native has been relocated.
(From OE-Core rev: d928e91a57e6e9dfa6a7d4e888e1e1064d7fc668)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We may define new OELAYOUT_ABI variable in ${DISTRO}.conf, therefore we
need to move the abi_version.conf before that.
(From OE-Core rev: 4e1a8ed1ab7e7bd950e511c79ddfe072cb280a6e)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MLPREFIX is needed in RDEPENDS for multilib build
(From OE-Core rev: 380efadd5640e5b57e710549b1ae761d0d3b3792)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need consistent configuration files for opkg so we might as well always use
the full list. This is equal to PACKAGE_ARCHS in the non-multilib case.
This fixes various multilib failures with ipk multilibs.
(From OE-Core rev: bc85abc5013d0c831cc3c3823df45536c293aaba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-running the debug_patch task would cause the build to fail. This patch
moves the extra patch handling directly into SRC_URI and removes the need
for the separate task, allowing safe re-execution of each task.
[YOCTO #2194]
(From OE-Core rev: 1d6156e37ef0f36cf5ce8eeaaf23560215c86833)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the do_unpack task is re-executed, the sed_done stamp was not removed, the
sed commands wouldn't re-run and the build would fail in do_compile. This
patch ensures the stamp is in ${S} and that we clean that directory
when unpack runs so it is a build from sctatch at that point.
[YOCTO #2194]
(From OE-Core rev: 2b190155d74d4369c61d26b1f4f0c3cce389ddbc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sed command run during do_compile isn't idempotent. This change fixes it
so that it is and the compile task can be re-executed.
[YOCTO #2194]
(From OE-Core rev: c9dcfbd87d749baa0a4948738055193982aad26d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch in this recipe patches both configure and configure.in which leads
to build failures once configure has executed and regenerated configure.
The fix to make patch re-executable is not to patch configure and
only patch configure.in.
[YOCTO #2194]
(From OE-Core rev: b3df34ba57284fa2c85f34be86d5d8e357becf7c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a patch patching both configure and configure.in. Since the recipes
all autoreconf, this is pointless and means subsequent patch tasks fail.
The fix is to only patch configure.in.
[YOCTO #2194]
(From OE-Core rev: 1d8c40d5f2119b4c4ae8a9b2645ae572ea9a54ff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were puzzling failures when you make a force recompile of any gcc
component. The error was in do_configure with cross-compilation badness
being detected in config.log files.
gcc is different in that many of the config.log files are generated during
the do_compile phase. This means this host contamination issue has always
been present but only shows up on a rebuild.
The fix is to force the appropriate configuration variable to "none required"
then gcc won't look in the bad locations.
[YOCTO #2279]
(From OE-Core rev: e7135f14f3ef37f93f5c28b319464f3d6dd9b8da)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gst-plugins-bad needs curl.h to finish its build, so add curl as its
dependency.
(From OE-Core rev: daa4d625524dc330786858ade570918cff0bc5d3)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe's do_patch was not able to be re-executed due to its custom
patching functions. This fixes things so that it can be re-executed.
It also fixes the unpack task re-execution by ensuring ${S} is clean
before the unpack starts.
[YOCTO #2194]
(From OE-Core rev: 1cfddb17e0c2576e55f62c10612e7cbd73e5ac5e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The all target in the makefile triggers "screen" and "remove" targets,
neither of which do anything useful/sane for our usecases. The simplest
way to get the makefile to behave is to only use the install target.
Clean up the recipe a bit whilst making these changes and simplify things.
[YOCTO #2194]
(From OE-Core rev: 06f6ca50c0cffdaf828688e01fcc70265eafa093)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There can be a conflict between the nativesdk libc and the host system's
libc. It is assumed the nativesdk version is of an equal or higher version.
This is a particular issue for pseudo if its loading a system binary
since the system's libc might be used of an older verison which would
then confuse libpseudo.so when loaded as a preload.
To avoid this, set LD_LIBRARY_PATH so the nativesdk libc is always
used.
Since we now use --without-rpath, we can remove the MAKEOPTS RPATH workaround.
[YOCTO #2299]
(From OE-Core rev: a481fe3b9883aa744be3253e2b4b27e6e46eb059)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When guile-native was relocated, there were messages like:
;;; note: source file /srv/home/pokybuild/yocto-autobuilder/yocto-slave/emenlow/build/build/tmp/sysroots/x86_64-linux/usr/share/guile/2.0/ice-9/eval.scm
;;; newer than compiled /srv/home/pokybuild/yocto-autobuilder/yocto-slave/fri2/build/build/tmp/sysroots/x86_64-linux/usr/lib/guile/2.0/ccache/ice-9/eval.go
and this confuses things like the autogen-native "guile --version"
check. This patch ensures the wrapper script sets the necessary
variables correctly.
(From OE-Core rev: 7a254d8294cfbe4b717d083c3d7fcc5515a5ab4f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix connman-gnome to work with connman 0.79, which made a number of
fairly serious DBus API changes. Also switch over to the newly
repopulated git repo on kernel.org in which the two previous patches
have been merged.
Fixes [YOCTO #2202].
(From OE-Core rev: 82744f56f8bfbdcc303034dee3d6e188cf8180b1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added distro tracking fileds for the following recipes:
qt-mobility-x11
gst-plugin-bluetooth
alsa-state
ocf-linux
avahi-ui
libjson
systemtap-uprobes
xf86-video-fbdev
u-boot-fw-utils
qt4-graphics-system
qt-mobility-embedded
lttng-tools
shadow-securetty
Also fixed a few minor typos in others (spelling of bluetooth and months)
(From OE-Core rev: c8fe4d6cde6fca736f8c00eac7a9cc217fa8a128)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The value of ALL_MULTILIB_PACKAGE_ARCHS needs to be consistent both
in multilib extended recipes and in normal context. If this isn't the
case it can lead to inconsistent configuration files at a minimum.
This patch ensures the value is preserved during the class extension code
since computing it after that point is hard.
[YOCTO #2290]
(From OE-Core rev: 529bc145152bb36d9696226b93729377a3b6a240)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PN == BPN test was designed to exclude native/nativesdk but also unfortunately
excludes multilib unintentionally. This change fixes this and allows multilib images
with alternatives to funciton correctly.
[YOCTO #2214]
(From OE-Core rev: 2878d19c4e19d76cb8be15825c40ff03f25f35f5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids a number of bogus preferred providers warnings too.
(From OE-Core rev: 823a2f96df84547216a26697838977a162f838c5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows systemtap-uprobes to build again after the recently
added patch broke the builds.
(From OE-Core rev: 4bbe926f3ca68297d70849bab67177da624316d1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Generally distros keep perl at /sur/bin/perl
Fedora 17 alpha also has /bin/perl
this causes eglibc build on such distros to put perl interpreter path in
the perl scripts as /bin/perl
But we set perl location for target as /usr/bin/perl
This mismatch of perl path causes failure of rootfs image creation
like this:
| error: Failed dependencies:
| /bin/perl is needed by eglibc-utils-2.13-r23+svnr15508.i586
NOTE: package core-image-sato-1.0-r0: task do_rootfs: Failed
ERROR: Task 8
(/home/nitin/prj/poky.git/meta/recipes-sato/images/core-image-sato.bb,
do_rootfs) failed with exit code '1'
This Fixes bug : [YOCTO #2286]
RP: Updated to better account for -nativesdk
(From OE-Core rev: 381bf0d364da5970682502f8f124264907587b87)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj
Richard Purdie
Martin Jansa
Denis 'GNUtoo' Carikli
Nitin A Kamble
Saul Wold
Mark Norman
Otavio Salvador
Shane Wang
Scott Garman
Andrei Gherzan
Tasslehoff Kjappfot
Andreas Oberritter
Paul Eggleton
Damien Lespiau
Jonas Danielsson
Ken Werner
Robert Yang
Darren Hart
Mark Hatle
Martin Donnelly
Marko Katic
Dongxiao Xu
Lianhao Lu
Joshua Lock
Bruce Ashfield
Venkata ramana gollamudi
Beth Flanagan
Zhai Edwin