Only adds avahi dependency when zeroconf is in DISTRO_FEATURES.
(From OE-Core rev: dcb6d36b26359eb7672abd72fcb089bfa83459aa)
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Added missing '' in base_contains()
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is necessary since pacmd uses this module.
(From OE-Core rev: ebf900455e4a0aafdee5a8b04cef91f8071fa3ca)
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These data files are required for module-alsa-card to load properly
(From OE-Core rev: 8dda0dc79f5c90f8d40450ba6215f44edcbacb8f)
Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This prepend was cding to ${S}, which then breaks base_do_compile as it assumes
it's in ${B}. The cd is pointless as all of the operations use absolute paths,
so remove it.
The result of this was that base_do_compile was failing to find the makefiles,
so the compilation happened in do_install.
(From OE-Core rev: ac3a8ce0b672d1488c9074bde1a1d062e0c5fd33)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There have been occasions that pulseaudio sees valgrind and then later it's
not available, adding this setting ensures determinism by disabling it by
default
(From OE-Core rev: 61001cd4d8a36a980b6e6967cba6f0ea48fdaebc)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ARM Neon instruction set compilation error fixed.
Build system disables Neon optimisations if
ARM target does not support it.
BT support dependent on bluez and sbc support.
sbc package added as a dependency.
(From OE-Core rev: 4e7b91b5a2613b957b08aefbee1aac28fdd19598)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since populate-volatile.sh will run everytime the device boots, no
need to postpone the postinstall when the rootfs is created.
[YOCTO #3840]
(From OE-Core rev: c237103096530a06fd0991b4335936e509dea76e)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default value for --with-database is "auto". So, if some package
installs a database library and pulseaudio auto detects, that library
will be added to the dependencies list, causing a dependency error at
do_rootfs time. For example, samba installs libtdb, which is one of
the pulseaudio supported databases.
(From OE-Core rev: 715631e5b8d5fc7dbcc8b8cbca1948f9301e8d68)
Signed-off-by: Mario Domenech Goulart <mario@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpulsecommon has moved into libdir/pulse.
libpulsedsp is an internal library for padsp so put that into pulseaudio-misc
along with padsp.
(From OE-Core rev: 01b9b1edcc82e0c8cb2240359daa5b14d2c0146b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
proximity-helper is only used by the bluetooth-proximity module, and
gconf-helper is only used by the gconf module. Clarify the packaging and clean
up dependencies by shipping the helper binaries with the modules that spawn
them.
(From OE-Core rev: 039170824cb77c1a68ec91d9f4dc1ae12f701b87)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add explicit build-dependency on GConf as currently it's an implicit dependency
and so vunerable to races at build time.
(From OE-Core rev: 558705735aa9a2d640d1114bd809ca4ea7f0130d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* to keep ${PN}-locale from
bitbake.conf:PACKAGES_DYNAMIC = "^${PN}-locale-.*"
(From OE-Core rev: 73252b16b501c0986b0ca0895e4534895a9ba3db)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake uses PACKAGES_DYNAMIC as regexp
^ could make matching faster (and it will be more clear that we're expecting regexp not glob)
* made all those last '-' optional, use .* (or nothing)
(From OE-Core rev: 2f3ebdfa5f42dae51063b043cc4b0fbe20b40064)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PulseAudio server recently added a dependency by default on the
switch-if-port-available module, but this was not enforced by the package
dependencies so the server won't start.
(From OE-Core rev: b0fd984dd132e332056863dcc11b312141d443fd)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When DISTRO_FEATURES does not include X11 ensure that both x11
and gtk are diabled correctly. ConsoleKit also has x11, so ensure
that any RDEPENDS is also excluded.
The flags for x11 changed at somepoint to use enable/disable, but
this recipe was not updated.
(From OE-Core rev: 0730d3449aa28600488e73de883240ba2bd60aec)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't DEPEND on openssl but configure will try to use it if
pkg-config thinks it might be installed. This can lead to failing
and/or nondeterministic builds, so let's force it off.
(From OE-Core rev: 1cdcd754651f8d519ac8e4ba0d241d784e2a0090)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ConsoleKit is a runtime dependency for the ConsoleKit module, but there isn't a
build-time dependency.
(From OE-Core rev: 3e05e52821e6042708a37421423601e9fe59116e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When NLS is disabled e.g. on uclibc the build fails
The actual problem is that pulseaudio build system
should cater for it but it does not
(From OE-Core rev: 802a2ec822738fc383ae259231acf0303e7cc7ea)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a clean-up following the recent addition of PN-bin
to bitbake.conf and lib_package
(From OE-Core rev: 42dfedc01beb90adfa222a0c671ca8876849f938)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures that tcpwrapper usage is always disabled, this was
inconsistent because it would test for libwrap and sometimes enable
and sometimes not.
This ensures consistent build reproducibility.
(From OE-Core rev: afa0efc3473fb5ba88d95594e382da2e03145c3b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is done because of this change in gdbm:
"gdbm: Package compat libs in gdbm-compat"
(From OE-Core rev: b91d8a07f736b7698650d25609245c89e0ed73d5)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PulseAudio requires libxtst, libice, libsm and libxcb when X11 is
enabled (in our case, when x11 is in DISTRO_FEATURES), so conditionally
add those to DEPENDS.
(From OE-Core rev: a758df3d72942f985fe46455aa075e52100a1156)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If orc is detected the compilation fails with missing headers which
should have been generated by orc (using meta-angstrom + meta-openembedded
and and armv7 target)
[RP: add RP bump, fix typos]
(From OE-Core rev: 8f72d9e4ecf495646af3c5cebe7f08ca01bbbb99)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches were marked by "UpstreamStatus:" line, fix it to use
"Upstream-Status:" instead.
(From OE-Core rev: b33b373c9a33fe0ff51104c96d1e5b105efc63ed)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit makes assembly syntax compatible with x32 toolchain
to avoid these x32 gcc errors:
| pulsecore/svolume_mmx.c: Assembler messages:
| pulsecore/svolume_mmx.c:107: Error: `(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:135: Error: `(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:161: Error: `(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:162: Error: `8(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:180: Error: `(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:210: Error: `(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:244: Error: `(%esi,%rdi,4)' is not a valid
base/index expression
| pulsecore/svolume_mmx.c:245: Error: `8(%esi,%rdi,4)' is not a valid
base/index expression
| make[3]: *** [libpulsecore_1.1_la-svolume_mmx.lo] Error 1
Orignally these assembly lines are written for x86_64 ABI, now they are
also compatible with
X32 ABI.
(From OE-Core rev: ccf01c858218ae67d609ced3a05d9a93a6ffc5d4)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This Fixes bug: [YOCTO #1418]
Remove the `q' suffix on x86-64 atomic instructions.
We don't need the `q' suffix on x86_64 atomic instructions for AO_t,
which is defined as "unsigned long". "unsigned long" is 32bit for x32
and 64bit for x86-64. The register operand in x86-64 atomic instructions
is sufficient to properly determine the register size.
(From OE-Core rev: daaaeb1bd1467a2bed75722ce3ff35be970402e0)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The only thing that got lost in the conversion is the "Pulse Audio daemon" description:
root@beagleboard:~# grep pulse /etc/passwd /etc/group
/etc/passwd:pulse:x:999:1000::/var/run/pulse:/bin/false
/etc/group:audio:x:29:pulse
/etc/group:pulse:x:1000:pulse
(From OE-Core rev: 2e5c7566a4b76bf3e783844cc69fd1313c6d97a4)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Volatiles are handled differently in a systemd world make the postinst fail:
//var/lib/opkg/info/pulseaudio-server.postinst: line 10: /etc/init.d/populate-volatile.sh: No such file or directory
Collected errors:
* pkg_run_script: package "pulseaudio-server" postinst script returned status 127.
* opkg_configure: pulseaudio-server.postinst returned 127.
(From OE-Core rev: d911635bdcb84bb162b49bca32c7c7867e56a023)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this is just work around, should be tested again after upgrade to
pulseaudio-1.1
* otherwise build for armv4t (om-gta02) fails with this:
| /bin/sh ../arm-oe-linux-gnueabi-libtool --tag=CC --mode=compile
arm-oe-linux-gnueabi-gcc -march=armv4t -mthumb -mthumb-interwork
-mtune=arm920t --sysroot=/OE/shr-core/tmp/sysroots/om-gta02 -std=gnu99
-DHAVE_CONFIG_H -I. -I.. -I../src -I../src -I../src/modules
-I../src/modules -I../src/modules/rtp -I../src/modules/rtp
-I../src/modules/gconf -I../src/modules/gconf -I../src/modules/bluetooth
-I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss
-I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop
-I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11
-I../src/modules/jack -I../src/modules/jack -I../src/modules/echo-cancel
-I../src/modules/echo-cancel -pthread -D_POSIX_PTHREAD_SEMANTICS
-DPA_BUILDDIR=\"/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src\"
-DPA_DLSEARCHPATH=\"/usr/lib/pulse-0.9.23/modules\"
-DPA_DEFAULT_CONFIG_DIR=\"/etc/pulse\"
-DPA_BINARY=\"/usr/bin/pulseaudio\"
-DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\"
-DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\"
-DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS
-DPULSE_LOCALEDIR=\"/usr/share/locale\"
-DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\"
-DPA_ALSA_PATHS_DIR=\"/usr/share/pulseaudio/alsa-mixer/paths\"
-DPA_ALSA_PROFILE_SETS_DIR=\"/usr/share/pulseaudio/alsa-mixer/profile-sets\"
-O2 -pipe -g -feliminate-unused-debug-types -Wall -W -Wextra -pipe
-Wno-long-long -Winline -Wvla -Wno-overlength-strings
-Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op
-Wsign-compare -Wformat-security -Wmissing-include-dirs
-Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self
-Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes
-Wstrict-prototypes -Wredundant-decls -Wmissing-declarations
-Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align
-Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math
-Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -c -o
libbluetooth_sbc_la-sbc.lo `test -f 'modules/bluetooth/sbc.c' || echo
'./'`modules/bluetooth/sbc.ci
| arm-oe-linux-gnueabi-libtool: compile: arm-oe-linux-gnueabi-gcc
-march=armv4t -mthumb -mthumb-interwork -mtune=arm920t
--sysroot=/OE/shr-core/tmp/sysroots/om-gta02 -std=gnu99 -DHAVE_CONFIG_H
-I. -I.. -I../src -I../src -I../src/modules -I../src/modules
-I../src/modules/rtp -I../src/modules/rtp -I../src/modules/gconf
-I../src/modules/gconf -I../src/modules/bluetooth
-I../src/modules/bluetooth -I../src/modules/oss -I../src/modules/oss
-I../src/modules/alsa -I../src/modules/alsa -I../src/modules/raop
-I../src/modules/raop -I../src/modules/x11 -I../src/modules/x11
-I../src/modules/jack -I../src/modules/jack -I../src/modules/echo-cancel
-I../src/modules/echo-cancel -pthread -D_POSIX_PTHREAD_SEMANTICS
-DPA_BUILDDIR=\"/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src\"
-DPA_DLSEARCHPATH=\"/usr/lib/pulse-0.9.23/modules\"
-DPA_DEFAULT_CONFIG_DIR=\"/etc/pulse\"
-DPA_BINARY=\"/usr/bin/pulseaudio\"
-DPA_SYSTEM_RUNTIME_PATH=\"/var/run/pulse\"
-DPA_SYSTEM_CONFIG_PATH=\"/var/lib/pulse\"
-DPA_SYSTEM_STATE_PATH=\"/var/lib/pulse\" -DAO_REQUIRE_CAS
-DPULSE_LOCALEDIR=\"/usr/share/locale\"
-DPA_MACHINE_ID=\"/var/lib/dbus/machine-id\"
-DPA_ALSA_PATHS_DIR=\"/usr/share/pulseaudio/alsa-mixer/paths\"
-DPA_ALSA_PROFILE_SETS_DIR=\"/usr/share/pulseaudio/alsa-mixer/profile-sets\"
-O2 -pipe -g -feliminate-unused-debug-types -Wall -W -Wextra -pipe
-Wno-long-long -Winline -Wvla -Wno-overlength-strings
-Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op
-Wsign-compare -Wformat-security -Wmissing-include-dirs
-Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self
-Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes
-Wstrict-prototypes -Wredundant-decls -Wmissing-declarations
-Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align
-Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math
-Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option -c
modules/bluetooth/sbc.c -fPIC -DPIC -o .libs/libbluetooth_sbc_la-sbc.oi
| modules/bluetooth/sbc.c: In function 'sbc_synthesize_four':
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:553:18: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:565:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c: In function 'sbc_synthesize_eight':
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:595:29: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: declaration of 'tmp' shadows a previous local [-Wshadow]
| modules/bluetooth/sbc.c:611:40: warning: shadowed declaration is here [-Wshadow]
| {standard input}: Assembler messages:
| {standard input}:6997: Error: selected processor does not support Thumb mode `mla r3,r0,ip,r3'
| {standard input}:7012: Error: selected processor does not support Thumb mode `mla r3,r1,ip,r3'
| {standard input}:7026: Error: selected processor does not support Thumb mode `mla r3,ip,r0,r3'
| {standard input}:7215: Error: selected processor does not support Thumb mode `mla r3,r7,r0,r3'
| {standard input}:7230: Error: selected processor does not support Thumb mode `mla r3,r7,r0,r3'
| {standard input}:7241: Error: selected processor does not support Thumb mode `mla r3,r0,r7,r3'
| {standard input}:7256: Error: selected processor does not support Thumb mode `mla r3,r0,r7,r3'
| {standard input}:7267: Error: selected processor does not support Thumb mode `mla r3,r7,r0,r3'
| {standard input}:7287: Error: selected processor does not support Thumb mode `mla r3,r7,r6,r3'
| {standard input}:7301: Error: selected processor does not support Thumb mode `mla r3,r6,r5,r3'
| {standard input}:7319: Error: selected processor does not support Thumb mode `mla r3,r0,r5,r3'
| {standard input}:7327: Error: selected processor does not support Thumb mode `mla r3,r1,r0,r3'
| {standard input}:7594: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7604: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7614: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7624: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7634: Error: selected processor does not support Thumb mode `mla r3,r5,r6,r3'
| {standard input}:7647: Error: selected processor does not support Thumb mode `mla r3,r2,r5,r3'
| {standard input}:7657: Error: selected processor does not support Thumb mode `mla r3,r2,r5,r3'
| {standard input}:7815: Error: selected processor does not support Thumb mode `mla r3,r9,r7,r3'
| {standard input}:7837: Error: selected processor does not support Thumb mode `mla r3,r9,r0,r3'
| {standard input}:7853: Error: selected processor does not support Thumb mode `mla r3,r9,r0,r3'
| {standard input}:7875: Error: selected processor does not support Thumb mode `mla r3,r9,r7,r3'
| {standard input}:7891: Error: selected processor does not support Thumb mode `mla r3,r9,r7,r3'
| {standard input}:7908: Error: selected processor does not support Thumb mode `mla r3,r0,r6,r3'
| {standard input}:7931: Error: selected processor does not support Thumb mode `mla r3,r6,r5,r3'
| {standard input}:7952: Error: selected processor does not support Thumb mode `mla r3,r0,r5,r3'
| {standard input}:7960: Error: selected processor does not support Thumb mode `mla r3,r2,r0,r3'
| make[4]: *** [libbluetooth_sbc_la-sbc.lo] Error 1
| make[4]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src'
| make[3]: *** [all-recursive] Error 1
| make[3]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src'
| make[2]: *** [all] Error 2
| make[2]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23/src'
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory `/OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/pulseaudio-0.9.23'
| make: *** [all] Error 2
| + die 'oe_runmake failed'
| + bbfatal 'oe_runmake failed'
| + echo 'ERROR: oe_runmake failed'
| ERROR: oe_runmake failed
| + exit 1
| ERROR: Function 'do_compile' failed (see /OE/shr-core/tmp/work/armv4t-oe-linux-gnueabi/pulseaudio-0.9.23-r6/temp/log.do_compile.3404 for further information)
(From OE-Core rev: 31a20d50124344dc708ade282677b2c7dda171b0)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* otherwise ie spitz (armv5te) build fails with:
| make[3]: Entering directory `/OE/shr-core/tmp/work/armv5te-oe-linux-gnueabi/libatomics-ops-1.2-r5/libatomic_ops-1.2/src'
| arm-oe-linux-gnueabi-gcc -march=armv5te -mthumb -mthumb-interwork -mtune=xscale --sysroot=/OE/shr-core/tmp/sysroots/spitz -DHAVE_CONFIG_H -I. -fPIC -O
2 -pipe -g -feliminate-unused-debug-types -DNDEBUG -c atomic_ops.c
| arm-oe-linux-gnueabi-gcc -march=armv5te -mthumb -mthumb-interwork -mtune=xscale --sysroot=/OE/shr-core/tmp/sysroots/spitz -DHAVE_CONFIG_H -I. -fPIC -O
2 -pipe -g -feliminate-unused-debug-types -DNDEBUG -c atomic_ops_stack.c
| arm-oe-linux-gnueabi-gcc -march=armv5te -mthumb -mthumb-interwork -mtune=xscale --sysroot=/OE/shr-core/tmp/sysroots/spitz -DHAVE_CONFIG_H -I. -fPIC -O
2 -pipe -g -feliminate-unused-debug-types -DNDEBUG -c atomic_ops_malloc.c
| atomic_ops_malloc.c: In function 'msb':
| atomic_ops_malloc.c:223:2: warning: right shift count >= width of type [enabled by default]
| rm -f libatomic_ops_gpl.a
| ar cru libatomic_ops_gpl.a atomic_ops_stack.o atomic_ops_malloc.o
| arm-oe-linux-gnueabi-ranlib libatomic_ops_gpl.a
| {standard input}: Assembler messages:
| {standard input}:286: Error: selected processor does not support Thumb mode `swp r1,r2,[r3]'
| {standard input}:329: Error: selected processor does not support Thumb mode `swp r0,r1,[r3]'
* this is just work around, proper fix proposed by Henning Heinold
hm we should think of reworking this recipe now. Because since gcc 4.5
pulseaudio for arm can use the gcc internal atomicstuff and in oe-core
and meta-oe we have 4.5 or 4.6 only. The lib is
only needed for mips and it is still the old release, on cvs
is a much better version, which supports thumb too, if
remember correctly.
(From OE-Core rev: 2d34fc0ce21fe06ff97208c8ffb65a718b444de9)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the x11 distro feature to determine whether --with-x should be
passed. Further, if we're using X11 add gtk+ to DEPENDS (it's required
to build).
(From OE-Core rev: a37ed5b42717463cf1a836fd011132b16938765f)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create an extra package, libcanberra-gnome, for gdm and
gnome-settings-daemon files installed by libcanberra.
(From OE-Core rev: ec46e591636cf1d27587038989c6b917d19be130)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
manpage generatition uses xmltoman utility
which inturn uses xml-parser. So we add
libxml-parser-perl-native to DEPENDS and also
inherit perlnative so it does not use the one
from build host
(From OE-Core rev: 51f6a683ec1d740adf09d808671c7098dc3f83e2)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If "bluetooth" is in DISTRO_FEATURES then enable bluetooth and depend on
bluez4, otherwise disable it.
(From OE-Core rev: f53d70bdeed989e031e06b8851a9706ff7ab9855)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some place pnum=1 is used which is removed as well since
striplevel=1 is default
(From OE-Core rev: 4e108857e0d40105f7ecbc55e99bd6c367bb7386)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* reuse 'audio' group as access group
The current failure is:
root@usrp-e1xx:/etc/pulse# pulseaudio --system
[..]
W: protocol-native.c: Failed to get GID of group 'pulse-access'
W: protocol-native.c: Failed to check group membership.
W: protocol-native.c: Denied access to client with invalid authorization data.
* add more required modules
(From OE-Core rev: 756e5fb08ee65cf459d88f97ae51adc86af75a70)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This disables linking against (lib)hal but enables the udev-hal compat layer so the hal-detect plugin keeps working. The hal-detect plugin is removed from the default dependencies to discourage its usage, but can be installed manually if needed.
(From OE-Core rev: e9fedfac0d8ff8213a142a7cfab9b83c840aef4f)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Older version have been retained to allow more testing of this release
(From OE-Core rev: f1fc6d084b079dea21ff1a30b815496452042490)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
HAL is deprecated and udev should be used with pulseaudio 0.9.22. THe .23 release from 2 weeks ago already removed HAL support.
(From OE-Core rev: 8579edc2f3f06cbe27ebfae52f8daff4ac6972f4)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I've cleaned up some odd license fields, fixed some license
names and corrected some incorrect licenses. LICENSE really needs
a pass through by the maintainers as some of the licensing is
incorrect.
Also, every license with Artistic should be gone through and noted as
which version of Artistic.
(From OE-Core rev: 4786ecdf7cd427089464dcb62579110d494e7cd7)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gypsy: Add upstream status information for gypsy's patch
alsa-utils: fix upstream status typo
pulseaudio: add upstream status for pulseaudio-0.9.15's patches
hostap: add upstream status for hostap's patch
glibc: add upstream status for glibc's patch
glib-2.0: add upstream status for glib-2.0's patch
mtd-utils: add upstream status for mtd-utils patches
add upstream status for opkg's patches
mark add_vercmp.patch as inappropriate since the added function is not
used.
(From OE-Core rev: b0052e9467608cdc2e3b85f5b718e6b9c03d44ca)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hostap: add upstream status for hostap-fw-load.patch
lrzsz: add upstream status for lrzsz's patches
bluez: add upstream status for bluez's patches
bluez-dtl1-workaround: add upstream status for COPYING.patch
libgsmd: add upstream status for gsm's patches.
gypsy: add upstream status for gypsy's patch
libpcap: add upstream status for libpcap's patches
ppp: add upstream status for ppp's patches
libtelepathy: add upstream status for libtelepathy's patches
telepathy-python: add upstream status for telepahty-python's patches
wireless-tools: add upstream status for wireless-tools's patches
wpa-supplicant: add upstream status for wpa-supplicant
zeroconf: add upstream status for zeroconf's patch
glibc: add upstream status for glibc's patches
dpkg: add upstream status for dpkg's patches
makedevs: add upstream status for makedevs's patch
opkg: add upstream status for opkg's patches
opkg-utils: add upstream status for opkg-utils's patch
minicom: add upstream status for minicom patches
rpcbind: add upstream status for rpcbind's patch
which: add upstream status for which's patch
clutter-gst: add upstream status for clutter-gst's patches
flac: add upstream status for flac's patches
gst-ffmpeg: add upstream status for gst-ffmpeg's patch
liba52: add upstream status for liba52's patch
libid3tag: add upstream status for libid3tag
libmusicbrainz: add upstream status for libmusicbrainz's patch
pulseaudio: add upstream status for pulseaudio patches
db: add upstream status for db's patch
neon: add upstream status for neon's patch
taglib: add upstream status for taglib's patches
libetpan: add upstream status for libetpan's patch
libopensync: add upstream status for libopensync's patches
libopensync-plugin-evolution2: add upstream status for its patch
libopensync-plugin-syncml: add upstream status for its patch
libsyncml: add upstream status for libsyncml's patch
empathy: add upstream status for empathy's patch
wv: add upstream status for wv's patch
xournal: add upstream status for xournal's patch
(From OE-Core rev: 0f9f0518ac46c2f2beb0224e881ff136f1603d33)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove nofallbackfix.patch it as already in upstream. Remove
autoconf_version.patch as already have new version of autoconf and no inbuild
libltdl now.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
There is a bug in pulseaudio uptream which uses new instructions on old
arm platform. So we keep arm version of pulseaudio unchanged.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
* Added another patch from Gentoo/OE to allow package to build for
mips arches
* Added SUMMARY, HOMEPAGE, and SECTION fields
* Added source checksums
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
This is the next stage of recipe reorganization, in this stage
many recipes where moved to a new meta-demoapps layer since this
is more appropriate for demo usage then the core. Additional some
recipes were moved to meta-extras to indicate they may be depercated
at a future time.
A number of recipes were modified since dependencies need to be
corrected.
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
Martin Jansa
Felipe F. Tonello
George Kiagiadakis
Richard Purdie
Ross Burton
Jackie Huang
Saul Wold
Cristian Iorga
Laurentiu Palcu
yanjun.zhu
Mario Domenech Goulart
Gilbert Coville
Phil Blundell
Khem Raj
Constantin Musca
Xin Ouyang
Denys Dmytriyenko
Andrei Gherzan
Paul Eggleton
Eric Bénard
Nitin A Kamble
Dmitry Eremin-Solenikov
Koen Kooi
Joshua Lock
Dongxiao Xu
Beth Flanagan
Zhai Edwin
Mark Hatle
Scott Garman
Richard Purdie
Mei Lei
Saul Wold