Added several cross-link references for the LICENSE_FLAGS and
LICENSE_FLAGS_WHITELIST variables. Note that the cross-references
previously put in for LICENSE_FLAGS were slightly wrong as they
were using the <ulink> tag instead of the <link> tag.
(From yocto-docs rev: dc2769c63d24d3650c993cfd48bcb4540ad36ca2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to add several links to the newly described
LICENSE_FLAGS variable in the glossary. Three links added to the
ref-manual and a single link added to the BSP Guide.
(From yocto-docs rev: 2ca6e556c299814d6ef847ed059a4f0a2d48adb3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the ref-manual, I added a new variable description for the
PTEST_ENABLED variable.
In the dev-manual, I added a note to the "Adding ptest to Your
Build" section to mention that the OpenEmbedded system uses
PTEST_ENABLED to enable or disable building ptests and that
the user does not set this variable directly.
(From yocto-docs rev: 52d6608caaa25378b873e41e1ddd05356ff8629a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit about values being passed through the
update-rc.d command and then a reference to the command's
page.
(From yocto-docs rev: e007414608ed801e440b701d6c43dca955a11611)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* For "Architecture did not match" and "Bit size did not
match", added the missing QA check name marker [arch]
* Under the already-stripped entry, added a final sentence
(to the paragraph before the note box)
(From yocto-docs rev: 7c3bda03a4424d1e083403266c570b34fcab9bbf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the link into the section for understanding how
OVERRIDES work.
(From yocto-docs rev: f897b9d0cc51899f3e4ce05b69a3c1dd429780d7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section heading in the BitBake User Manual changed.
Consequently, the lone reference in the YP doc set to that old
section became incorrect. Fixed the link.
(From yocto-docs rev: f4ecea15d62fd0eed83f03d370b20bde95f3936d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More detail added.
(From yocto-docs rev: 84177a600f84af4cc41b9493b46e2a23bc7ccc19)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
Updated each manual's CSS style sheet to contain a style for
how the permalink symbol looks on its own and how it looks
when a user hovers over it with the mouse.
(From yocto-docs rev: c8d4afa0b83a40ac2de0c47c191a11b3e7d241e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
Updated the customization layer to include the file that generates
permalinks for the variable definitions.
(From yocto-docs rev: adfb6f06fcba2045e56353bcff0df1df9106544c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5463]
In addition to adding these two new variables, I did some cleanup
of the TUNEABI variable description for consistency.
(From yocto-docs rev: cf5c5fd0cb262b8da030ac923fda902d9e007b21)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New glossary entries.
(From yocto-docs rev: dbf566e1009d51ad8fce1ac8251249a70fb9270c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New variables added to the glossary.
(From yocto-docs rev: 903ed6d26d7d32e4c1237fa9fd44b7471f1a41f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 5463]
Added the TUNE_ARCH variable. Also placed a cross-reference to
TUNE_ARCH in the TARGET_ARCH variable.
(From yocto-docs rev: 85d2a49323e0040b263b6d7f08fd036a25297b05)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1949]
Updated the following tasks to note that they "clean" out some
areas when run:
do_populate_sysroot
do_deploy
Also made some notes to the do_cleansstate task about attempting
to clean remote mirrors.
And, made a change to do_cleanall to specifically mention that
DL_DIR is cleaned.
(From yocto-docs rev: 7e532b17ccd89e43d3661c733ce1f06a52066c29)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
Added a new section to start the Migration chapter. This
section will hold general migration issues that are not tied
to a specific release.
(From yocto-docs rev: e78ae7c64ae5fa7e7a5b1f804fb40b5690a4e899)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul reported that "buildimg" was being used as the class name where
it should have been "bootimg". Not quite sure how this slipped through
but it has been fixed now. There were five occurrences.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: fdd6a6725bd22e4272a99a3da179cd69c4a221a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note at the end of the section to point to a wiki page
with more information.
(From yocto-docs rev: ba310c34844e9e496d7ff1164691930d4f330f93)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a stale link. Updated to point to the published
HTML file now and to mention that you can find it in the
Source directory.
(From yocto-docs rev: bc51935372cfd81a77f201768173d8b1eb1677c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6400]
Replaced the sentence in the note to specifically note that the
genericx86-64 BSP has been added for 64-bit Atom systems.
(From yocto-docs rev: ad2cbe806580c880708e5e60435046b07258a537)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a ptest section to the "Moving to the Yocto Project 1.6 Release" section.
Fixes [YOCTO #6400]
Added a new section named "Package Tests (ptest)" to the migration
section stating that ptest is built but not installed by default.
I also added some cross-reference links to a usage section and to
the ptest.bbclass section.
(From yocto-docs rev: f752867265a1299b1d2790ae59a990a7991a6108)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistency on how we refer to a task name throughout
the YP manual set. The proper way is "do_<taskname>". Some
occurrences did not include the "do_" prefix. These have been
fixed.
(From yocto-docs rev: b32821bb0d3e6de7bca68b25c662a023526a10c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed a view wordings to more accurately describe what was
going on. This was feedback from Paul Eggleton's review.
(From yocto-docs rev: 6152a849c0e26178ce13a29b1f353d1b2912427c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
Added some code to suck in the XSL templates that support
permalinks.
(From yocto-docs rev: 713a17465df48de2ece3845bbd7a8bf972e353b0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5521]
I created a brief note in the do_fetch subsection of the
"Taking a Closer Look" section to deal with how the build
system uses checksums during do_fetch to re-execute stuff
if a file:// listed in the SRC_URI has had its contents
modified.
(From yocto-docs rev: 7b857635f2663af7c1d5e8aa87239472a5b47919)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
I created a new section in the dev-manual titles
"Creating a Custom Template Configuration Directory" that describes
how the build system uses the template local.conf and bblayers.conf
and conf-notes.txt files as a basis when creating the real
deals in the build directory's conf folder. The context of this
is so that the user can create their own directory with their own
template files for repeated configurations and to create a custom
conf-notes.txt file should they want the setup scripts to display
some custom list of targets.
I also modified the two script references in the ref-manual for
oe-init-build-env and oe-init-build-env-memres. I needed to
link to the "how-to" section and added a bit in there about how
the scripts go about forming the conf files in the build directory.
(From yocto-docs rev: c07fb7082fe08387bbc546b2a23620dedc7127b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added "meta" as part of a path.
(From yocto-docs rev: 14cda136d1f8690f5ea15b218f2ab4fb49c0afa9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added detailed requirements for the three LSB type images
in order for the build to create an LSB-compliant image.
Massaged the weston image a bit.
(From yocto-docs rev: 01fee2bebe76512ab5707212fc8d78df20d83126)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I implemented some review feedback from Paul Eggleton on these
variables:
TARGET_CFLAGS
BUILD_OPTIMIZATION
SDKMACHINE
IMAGE_ROOTFS_ALIGNMENT
IMAGE_DEVICE_TABLES
EXTRA_IMAGECMD
SSTATE_MIRROR_ALLOW_NETWORK
PACKAGE_ARCHS
SDK_PACKAGE_ARCHS
(From yocto-docs rev: 6fd804376367449494d5a5cfeb7e9bb2f4c04de1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a couple of examples to show how to set passwords.
This is the -P option for adduser.
(From yocto-docs rev: 2726fcd3b3c2a5144b23af6ab342832c242f85c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had the wrong description in here.
(From yocto-docs rev: eafe3fb2324d6361ee799177ffbb3de05795a2e2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a link to IMAGE_ROOTFS.
(From yocto-docs rev: b87975da8f99926f220d11a02b1655245d00f8e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the following variables:
CFLAGS
CPPFLAGS
CXXFLAGS
(From yocto-docs rev: 58d82513ef70287717e7e208742aa72196708fc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the following variables with minor changes:
TARGET_CC_ARCH
BUILD_CPPFLAGS
BUILDSDK_CPPFLAGS
CPPFLAGS
TARGET_CPPFLAGS
(From yocto-docs rev: f7d48ed379778a8568c7e5f812cdb1cbc5339f39)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6159]
I applied some review edits to various parts of the QA chapter
as derived by Paul Eggleton. Also, updated two areas of the
insane.bbclass list.
(From yocto-docs rev: 6529a261961339b747bb3b89b3080ef794244809)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6159]
Edits from Paul Eggleton included some reformatting, some minor
wording tweaks, and edits to a couple tests as described in the
insane.bbclass.
(From yocto-docs rev: b42ef1bd51cb20f6bbb6bf812999e3a35b332339)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the CFLAGS and TARGET_CFLAGS variables.
Created these new variables:
BUILD_CFLAGS
BUILDSDK_CFLAGS
CXXFLAGS
TARGET_CXXFLAGS
BUILD_CXXFLAGS
BUILD_SDKFLAGS
CPPFLAGS
TARGET_CPPFLAGS
BUILD_CPPFLAGS
BUILDSDK_CPPFLAGS
(From yocto-docs rev: 00d1895f56f8d65944549ab216d1e0ccdceea674)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new chapter is a reference on the default configuration
QA check messages you can get from errors and warnings.
(From yocto-docs rev: 04d766b4e1235ae46df38c4b296cb2729b6a439f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
Both section for the environment setup scripts (oe-init-build-env
and oe-init-build-env-memres) were updated to provide some usage
information on the conf-notes.txt file. This file is where the
default list of images appears that the scripts display upon
completion.
(From yocto-docs rev: 77bd0cd6eeb77036fb7e1584c469f98c2524b750)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits based on feedback from Paul Eggleton.
(From yocto-docs rev: 71bd6b3e0c8f7abcd753240fd8a503b62443ad74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made sure all formatting was correct and also applied some
cross-referencing for the reader where appropriate.
(From yocto-docs rev: aea5cab493107b2458ecd3bde719115c3f4e02b4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the creation of the new chapter that documents the 51
tasks defined by the OpenEmbedded build system, the remainder
of the ref-manual had many first-instance occurrences of do_*
task names that could be cross-referenced to the new sections.
I have added these links.
(From yocto-docs rev: 2ff39bd226a1d8f11924283bbaa3542a9d936ba3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to support a new chapter on the 51 tasks that the
OpenEmbedded build system defines. The changes include a new
file called ref-tasks.xml, changes to the ref-manual.xml
building file to include the new chapter, and a new bullet
item to the list that describes what is in the reference
manual.
(From yocto-docs rev: a816746051ec025014e515fb848b3e0e58d4c7be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From yocto-docs rev: b8e7dee82929213e7581d6c598f42da74ee03988)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new section on "Matching Branch Requirement for Git Fetching"
into the BitBake section. Plus, made some minor corrections to
some of the 1.5 sections.
(From yocto-docs rev: 326a8009ca0bef0a4686510bb521010d8f58ac81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
I pulled the change I put in to warn users about forked packages
based on further review from Paul Eggleton. This pretty much
means the bug is back to square one.
(From yocto-docs rev: fec630e4d1c464865d85e824ec684ef3cee55b42)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package architecture for armv7a packages with the thumb optimization
enabled will now get a "t2" suffix as it should; this was not the case in the
1.5 release. Architecture names will change within package feeds as a result.
(From yocto-docs rev: 1ce59f6911dd67835266aa3b0e29f404a487fd6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I get this list from meta-yocto/conf/distro/poky.conf.
(From yocto-docs rev: 796d4eced50d14203f1a791ff557a4016f4dd031)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set the release date to April 2014.
(From yocto-docs rev: 2592bc968edeea941a92e6bdd321dd872745b78c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I ordered these 39 tests by alphebetical ordering.
(From yocto-docs rev: 3a7ef1c149ee1f8f0ac4709e906f5c84ed7ab642)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
Edits to fix the occurrences of VIRTUAL-RUNTIME_initscripts = "".
I removed it from all places in the manuals except under
"Selecting an Initialization Manager". Note that it still
needed removed from "Using Systemd for the Main Image and
Using SysVinit for the Rescue Image".
Also, in the "Using Systemd Exclusively" section I made some
edits as suggested by Paul Eggleton's review.
(From yocto-docs rev: 28b2e3eba3acff17f165899a7f4a65c98263e201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Applied edits to the section in the dev-manual on running tests
on hardware.
Edited the TEST_TARGET and TEST_IMAGE variables.
(From yocto-docs rev: a26ba11c739aabab4009a944d9b622e2814c7fca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 5766]
I removed the note about the "live" IMAGE_TYPES. Turns out I
was wrong on this information. It does not create a "directdisk"
image. That is accomplished through a .bbclass.
(From yocto-docs rev: a3b762be9933178e9cecdac3fa9e110c031a64d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
Added a bullet item to the packages section in the migration chapter
for upgrading to YP v1.6. Item notes the issue and warns the
user to beware.
(From yocto-docs rev: f66ca39a65c2529ebc552d3a816e6565dae183f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6125]
Did some re-writing based on Jonathin Liu's feedback.
(From yocto-docs rev: bee4a584bcb1e70e9848324781c32d1d9e3d1fc2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Removed the note limiting this to QEMU tests.
(From yocto-docs rev: c91d058514832aacfb74fd4480e0a2dba95b4921)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor re-wording edits as suggested by Paul Eggleton.
(From yocto-docs rev: 699eec0b691a19b4ae2f05c7774f559898e952da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4961]
Documented the user requirement to use PACKAGE_INSTALL to specify
packages for installation into an initramfs image. Normally,
you use IMAGE_INSTALL. To account for this user model, I updated
the PACKAGE_INSTALL and IMAGE_INSTALL variables. I also added
a bit more information to the "Images" chapter item that
talks about the core-image-minimal-initramfs image.
(From yocto-docs rev: a1ad649cf310f281a7de584d5b9a1820ca99d4eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Applied some feedback to the variables based on Paul's comments.
Needed a caveat on how you can use these variables.
(From yocto-docs rev: ef8fac4b36089d3162ee16c93866a39bcd31701c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Two new variables added to the glossary. These help with
specifying kernel modules that need to auto-load on boot and
with specifying module.d syntax in the modname.conf file.
(From yocto-docs rev: 1ac544c4f6129faafea10691b426cd510ff56a69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced the v3.4 version example with the v3.10 version.
It is more up-to-date.
(From yocto-docs rev: 2e7f5d4fbe24a8248686c9ca7cf870204966beec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied this patch from Dennis and then removed some whitespace,
used the 5-space indentation convention for the literal, formatted
the task name and did some other minor fixes.
(From yocto-docs rev: 477a9ecb2f91681ee401478189a424793381bfcb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some review edits to change the useradd-staticids class and the
related USERADD* variables. Input from Paul Eggleton.
(From yocto-docs rev: 9b94046721a971de41d2062a48d624e06dcf17f0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the new useradd-staticids class to the reference section
for classes.
Updated the USERADD_UID_TABLES and USERADD_GID_TABLES variables
to tell how the system uses BBPATH in the default mode to
get UID and GID information from the files/passwd and files/group
files.
Added a note indicating that you can delete the TMPDIR directory
to fix things up if you configure useradd-staticids in a
configured system.
(From yocto-docs rev: a3f5ee3f5060369405d59a238fb02bddfeae5d6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2444]
Several areas affected by the reference BSP "beagleboard"
being replaced by "beaglebone".
(From yocto-docs rev: 2f02b570e1ebcf0469871b67a029b65fa8b285f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #605]
I added an example showing what the user would need to do in order
to build an ISO file. This seemed to be the best existing place
in the YP docs to get this information in.
(From yocto-docs rev: a715c28e533f723e0c2d4ab4d33b86b93fa2d66b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found some poor writing in this description.
(From yocto-docs rev: f54810d68a5efb25c102cd99a7e2b9cfcf7ad7de)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton to the section on
migrating to the 1.6 version of YP.
(From yocto-docs rev: ffd224a16cef4d643cc2c527ad8dc5e15d715faa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The set of archive* classes has been removed leaving only the
archiver.bbclass.
(From yocto-docs rev: 1660896b47ff5d21ae73d383505063f1c7c1a3b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the referencing to adjust to the emergence of the
archiver.bbclass and disappearance of the archive* classes.
(From yocto-docs rev: 903e9b7c534e65e1be3eb0dc57378e120c7a0e3e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out that the user does not set these variables.
(From yocto-docs rev: b016906dad7e3d7856935e83e5c9b09cfa399caa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
In the dev-manual, I located instances where a note about using
VIRTURAL-RUNTIME_initscripts = "" in the local.conf file would
be appropriate. Three areas updated.
In the ref-manual, I located the note in the systemd.bbclass
section and the variable descriptions for SYSTEM_AUTO_ENABLE,
SYSTEM_PACKAGES, and SYSTEMD_SERVICE.
(From yocto-docs rev: 57b0acf2f3f8159b635b42dcffa129f7d945eb81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3686]
In the dev-manual, I created a new section called
"Making Images More Secure." The section explains in general
how to enable the security flags.
In the ref-manual, I updated the CFLAGS variable to point to the
new section.
(From yocto-docs rev: 3ed91a46eaf5c1fdf84369ea69951775d87a42da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5861]
Added a note to the SDKMACHINE glossary variable stating that you
can't set the variable in the distribution configuration file and if
you do, it won't get recognized.
(From yocto-docs rev: 8cdc14e553586f6a754dfc3a91cc9741eb1784ee)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Text was written with release 1.5 in mind.
(From yocto-docs rev: de4906d9c49a9846e1907c1bd53070bf1d5ce991)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6045]
Added a sentence to the end of the variable's description indicating
how to enable building an ISO.
(From yocto-docs rev: 2806518155fdbb42b392a64b57a67c9259640f79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6064]
The directory name for the conf/distro/<distro>.conf file was
wrong. It was conf/<distro>.conf. I have corrected it.
(From yocto-docs rev: c8ae4fb23e76a45bbbd4e673311b3ec74980644d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit is really only 1/2 of the section (the final half).
I put in the first half in a previous commit and pushed it before
realizing those changes were in that commit. The commit that
the first half of the migration changes are in is
88a075e6306349e5f8c0d53b5288ef1e64956cd3.
(From yocto-docs rev: 8f94391f86ee9643256979332fa06541fb8b16f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_package_write task has been removed leaving only
do_package_write_* tasks. This variable description had an
example using that obsoleted name. I changed it to
do_package_write_ipk.
(From yocto-docs rev: ec1c33a867f539cd83d672845075f2437cd917ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The migration section references the variables COPY_LIC_DIRS
and COPY_LIC_MANIFEST. I added some cross-references in the
text to the variable locations.
(From yocto-docs rev: c01c06a4c685f923c2abb616084b1f08666a5af5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did not eliminate this variable but rather changed the description
to indicate that it has been deprecated and that the user should now
use a PR Service to do this stuff. There were several areas in the
YP manual set that used the variable in code. I just deleted those
lines from the code.
(From yocto-docs rev: 88a075e6306349e5f8c0d53b5288ef1e64956cd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "sum.jffs2" option was renamed to "jffs2.sum" to better reflect
its purpose. I updated the list of options for the IMAGE_TYPES
variable to reflect the change.
(From yocto-docs rev: 4226ff4aa96eed1d51753d5dee72c6264ee2d7f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PACKAGE_GROUP variable was renamed to FEATURE_PACKAGES.
I added that fact to the description and pointed the reader off to
the new FEATURE_PACKAGES variable.
Added a new variable description for FEATURE_PACKAGES.
(From yocto-docs rev: f7a0a17c211cfc8f885771a5221bf3b59bc6bf95)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a brief explanation of this temporary directory to the chapter
that presents the structure of the Source Directory. The
explanation is based on Paul Eggleton's input.
(From yocto-docs rev: 688c36aec57bb283d03ffb7e1d9448563cb1496c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added this directory to the chapter that presents the Source
Directory structure. The explanation is based on Paul Eggleton's
input.
(From yocto-docs rev: 425df89935f2cd07ecbc3050d273100d57e3ab3d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This directory was missing from the chapter that presents the
Source Directory structure. I have added a brief explanation
of it based on Paul Eggleton's information.
(From yocto-docs rev: 5c3d392c64f386a3a29922629387c199db2b7ad1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob no longer uses this layer so I removed the two instances in
the YP set where it appeared.
(From yocto-docs rev: 37e3f261bd61a96a2929a525f9896c39658d26f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed a short description of this top-level directory in the
chapter.
(From yocto-docs rev: 49f8cf264d10e37933502067c522f1c2e3ffe751)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the buildhistory directory. Added the deploy/sdk directory.
Beefed up the tmp and build directory descriptions.
(From yocto-docs rev: 3ac9435a48b6da730e640b204ba3f41daebc39e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided better link to Wayland and a new link to Weston.
(From yocto-docs rev: 95086f7d4bf8ce3b3c33c2863435f2896c73cc3f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor changes as a result of a read-through of the section.
(From yocto-docs rev: 4139f67d3615d6fe3eca79356c92937a314b200e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some items found reading through the section. Needed some
cross-referencing to better targets based on newer information.
The text was quite dated in this section.
(From yocto-docs rev: eba809fd709d801bec50a820d7e6a5a79707dde6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor fixes throughout.
(From yocto-docs rev: d44ae0da21d84acbe1556824e228c7ab0af1ba2c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Along with some minor things I did the following:
* Added a brief explanation and reference to the reporting error
tool. It seemed like a good chapter to include it. I put it
in the debugging section.
* I added a pointer to the BitBake manual right at the top of a
section that had many usages of the bitbake command.
(From yocto-docs rev: 9317433bc715e9fdac2fc629ed659ac926d67531)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the read-through, I noticed that I did not have a complete
list of YP manuals in the "Introduction" section. I also added
the new BitBake manual to the list of external manuals.
(From yocto-docs rev: 46ae0400d807c733bc0c32b07b4b59cc8d6d2618)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This had been negleted and many new sections were not on the list.
It is all up to date now.
(From yocto-docs rev: 3291491ec41146a1dfa0cb2f1387fba85b1c7d24)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This information now exists in the separate BitBake User Manual.
To remove this information, the ref-bitbake.xml file was taken
out of the ref-manual.xml build, an overview bullet describing
BitBake chapter was removed from the "Introduction" chapter,
and one cross-reference link to a sub-section of the old BitBake
chapter had to be re-routed into the similar section of the BitBake
Manaul.
(From yocto-docs rev: 3828291699b5997c28a782600c9d472b8449ecd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1562]
In the dev-manual, I created a new section called "Using the
Error Reporting Tool" that describes how to use this feature.
The text was based on information I received from Andreea Proca.
In the ref-manual, I added a new variable entry for ERR_REPORT_DIR
in the glossary and a new report-error class in the class chapter.
(From yocto-docs rev: 70a5538fefcc1b77958fe4b2f29be00354f4137a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5442]
Updated the TMPDIR variable to call out the scenario where a user
might want to separtely set TMPDIR to a local drive and thus be
able to have the Build Directory on NFS.
Updated the "Build Directory" term with a note indicating that by
default, TMPDIR is inside the Build Directory and thus cannot be
on NFS. However, the user is able to by-pass that per setting
TMPDIR separately outside of the Build Directory.
(From yocto-docs rev: a5a308c512a3f4285bce16f17974dbf6b67432b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5766]
In the ref-manual, I added "Eclipse" use in the title for the
"Graphics Support" packages because the "xterm" package is required
for graphics support across all distributions.
In the dev-manual, I specifically called out the need for "xterm"
as a host package at the top of the section describing workflow
with Eclipse. I also updated the cross-reference links to the
host package and Linux distro requirements to point into the
ref-manual, which is more comprehensive, than into the QS.
(From yocto-docs rev: d3405be506fcb113f01d4fcba4631db80a1ed5dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4866]
Updated the main area where it talks about needing the right
versions of Git, tar, and Python. You can get this set up using a
couple methods. I documented both.
The changes in the FAQ and in the QS are basically notes that point
to that section for more information.
(From yocto-docs rev: 1b64c7c271303ecf10ec85c8a2cd5a0d909f1151)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5442]
Updated the description to note that TMPDIR cannot be on NFS
since it has issues that mess up the build process.
(From yocto-docs rev: a2fa1c8a23ee7a26fa362e089d84747b4cb4618b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2528]
The defaults for BB_NUMBER_THREADS and PARALLEL_MAKE are now
automatically set to the build host's number of processor cores.
I updated the "Building and Image" section in the Quick Start
to state that. I also updated the PARALLEL_MAKE variable.
(From yocto-docs rev: 2069c96d2410605c089da4eede2c7b4f9a7b704a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the adt-manual in the "Optionally Building a Toolchain Installer"
setion, I added some basic advantage information for building a
toolchain installer using bitbake image -c populate_sdk.
In the ref-manual, I added cross-referencing to this basic information
in several strategic areas: "SDK Generation", the populate_sdk class
reference section, the populate_sdk_* class reference section, and the
"Cross-Development Toolchain Generation" sections.
Finally, I also put in documentation for a new class called
autotools-brokensep.
(From yocto-docs rev: cde7dd2fbd7bdc0d71dc678ee7a5422459654287)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2424]
Some imgage names were cleaned up to have more meaningful names.
These doc changes here take care of changing "core-image-basic"
to "core-image-full-cmdline".
Five instances changed.
(From yocto-docs rev: b758f9645e66867b5728da1dd989bae70a216fcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5410]
I updated the figure that shows what do_rootfs does to create
the image. The new addition is the creation of the .manifest file
that lists out package information in the image. Supporting text
was also added in the section.
The updated figure was needed in both the ref-manual and
mega-manual figures folders.
Also, part of the fix included a new variable description for the
IMAGE_MANIFEST variable.
(From yocto-docs rev: 770448e0e8ce2e2c517ced5e71f5a916fefe5cf2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton noted that the output to bitbake <target> -c listtasks
was documented as going to a specific file only when in fact it
also goes to the console. I updated the section to include that
fact.
(From yocto-docs rev: 0ed7da3f0fc21412c1045889f241a3d86587d16f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5931]
Added descriptions for the following variables in the glossary:
* MODULE_IMAGE_BASE_NAME
* KERNEL_IMAGE_BASE_NAME
* PKGE
* PKGV
* PKGR
* PKG
The first two are for the bug. The remainder needed to be added
as they were referenced from the first two (except for PKG, which
I was told needed to be added anyway. I also fixed a couple formatting
issues in there for some other variables.
(From yocto-docs rev: c488b57a2ae5a5d1ef4b0da0ecaa9589c3106a45)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
Added the new variable CONFIG_INITRAMFS_SOURCE, which points to the
initramfs source. I also added information to the
INITRAMFS_IMAGE_BUNDLE variable noting how its use can avoid
circular dependencies as described by the bug.
(From yocto-docs rev: 73267642299d1164eeee5866e7ca7006c56260e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The opening sentence here said that the build history is
kept in the $TMPDIR/buildhistory directory in the Build Directory
as defined by the BUILDHISTORY_DIR variable. Well, the variable
claims it is kept in $TOPDIR/buildhistory. I went with the
variable as the correct source. So, I changed the intro
sentence here.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 242e372affe771776bdfc17f3e3f5187d8965467)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added more detail about this directory. I stated that it
is the top-level build directory and it is set when you
initialize your build environment with one of the init scripts.
(From yocto-docs rev: 839d704e7096dba039b17e5989cad7314732e6db)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the bit about isolating SDK information. Also removed
the workaround and text regarding the limitation that caused
adding and removing INHERIT += "buildhistory" to re-execute tasks.
Added a few links to some newly documented variables.
(From yocto-docs rev: 7d13bea6d9f0c2bdc9aa58c2933998d6d10ac810)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I modified a few areas to help integrate some newly documented
BUILDHISTORY_* variables. Mostly some rewriting to feature
some variables that help the user select build history features.
(From yocto-docs rev: 8cb6a09ba7f0bd645a12e6f7a93247a9f0e77980)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5855]
Added this new variable to the glossary.
(From yocto-docs rev: 72e31962ecb3289c3f986ecb54a5590b5101067d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5857]
I had missed replacing the release date in the manual revision
history tables for the 1.5.1 release. It was still an estimate.
I have replaced with the actual date of "January 2014"
(From yocto-docs rev: fb9abe0df33a9b551d797ac1b72577931f5f8ce6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
export XDG_RUNTIME_DIR=/tmp/$USER-weston used instead of
export XDG_RUNTIME_DIR=/tmp/$USER=weston
(From yocto-docs rev: 39cd1d39f550f19b391c037639b9ed6493b08cde)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a typo and also added a bit of information to be sure
the user understands this affects the local host.
(From yocto-docs rev: 4111ac06276f2d1b134176683c0f4d446ba35ef9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5801]
First draft of this description.
(From yocto-docs rev: 412d0cc7dbb74ece45940c40fbb617217ab88d2d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better wording. "holds" could be confusing for some.
(From yocto-docs rev: d94a1be421f39637b1d760dad401fdfb54e20b07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5755]
Put a link in the SDK section of the "Closer Look" chapter. The
link goes back to the SDKPATH variable.
(From yocto-docs rev: 7420da33bfa89625b5bbf592416c7f07780f8285)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5762]
Applied some more detail based on Laszlo's review comments.
(From yocto-docs rev: eb8d11504d6c22dfd9620422df3fc31cfcebb00c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5762]
Initial draft of this variable in the glossary.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: fb603925de6760f620f9f2832ad6cb4aad3acaae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5755]
I added this variable to the glossary chapter.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 0ad0e2ca351ebc52c92404d71502455cf7c042c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Noted that if these variables are not set, they both default
to the number of cores the build system has.
(From yocto-docs rev: 8654aeb91f734628bffda9d5de0cdc9ea27d3f67)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before this change, x11 was only documented as an IMAGE_FEATURE.
However, it is heavily relied upon as a DISTRO_FEATURE by
pacages that have an optional X dependency determined during
build time. Examples include libsdl, dbus, alsa, and
pulseaudio.
(From yocto-docs rev: dd243b453b6d69bc439dda816fa5c9c83c5c3cd4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4942]
Added a note to the variable description stating that if the user
does not set TCMODE to "default", it is up to them to verify that
components are compatible with the toolchain.
(From yocto-docs rev: e67d7635c1d749e65aaef0d4cc6576a3ee312ddd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit about needing to place the inherit statement last.
(From yocto-docs rev: 204e15035a9a116002b7f645e4edb378979c89f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the machine-dependent and machine-independent descriptions.
Created matching description from the "Writing a New Recipe"
section.
(From yocto-docs rev: 89a00beb81be60668abfdd67b13f5ee5bdc7ea1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor changes.
(From yocto-docs rev: e545ee26e7e6c827c5ee6d7061f01eda58c9c82b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added perl-Thread-Queue to the essential and graphical
package sets for the Fedora distribution.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 26b1ce3cd1fb20b67107d0d1bc0a66cc3a06706e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These variable descriptions were identical in the ref-manual.
I found out some reasoning behind that and added a bit of
explanation to the entries.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 5c786b5b62fefb959ed7c13bb83e718a9eb22189)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
Added a new description for the INITRAMFS_IMAGE variable. Also,
made a formatting fix to the INITRAMFS_IMAGE_BUNDLE variable.
(From yocto-docs rev: 87c5c0b1554233c3ce1c41291d852021ec62e0dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
Added that the kernel class sets the variable to a null string
by default.
(From yocto-docs rev: d00ea912ad9ad1558546496e72fca229b9b8081b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
First draft of a new variable description for
INITRAMFS_IMAGE_BUNDLE.
(From yocto-docs rev: 4f1ac2840750fa35afa7584d28464fd539883399)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5684]
Added a clause to note that the tarballs saved to the DL_DIR area
include the Git metadata.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 76cbb8a149b9fda6879f9dfc6a17dab992325e94)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The FAQ entry for the information on adding a package to your
image changed regarding the cross-reference. I updated it to
the new anchor tag.
(From yocto-docs rev: 6c6b4cced41354412dc8c8d3c99d69f3a7cc8a95)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some more information around the use of the ICECC_DISABLED
variable. Information from Martin.
Reported-by: Martin Jansa <martin.jansa@gmail.com>
(From yocto-docs rev: 25990dbe66690991babda602ef40df948b70b038)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We no longer have the external-sourcery.bb recipe. Had to rewrite
this around it.
(From yocto-docs rev: 4b0e3860216092461862d29b3a53a834f8dd43b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory is not a temporary thing.
(From yocto-docs rev: 4a10a64866e9e769a2113f95943d69cb79543d6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used a better word to describe the argument list.
(From yocto-docs rev: e31852ee32b2f5166cc766a2cdfe07616dd259db)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold provided me with more detail on this class, which
I added.
(From yocto-docs rev: eee81ed69fc6ba766926f8514e88df4ba4640cec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton provided an expanded explanation.
(From yocto-docs rev: 313899b280d7879ee86c9317021388a3cd080662)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Three broken cross-references to the "qmake_base" class existed
in the variables chapter. The actual class "qmake_base" is
listed as part of the "qmake*" class so there is no tag taking
a user to the exact "qmake_base" class. Changed the tag to
"ref-classes-qmake*".
(From yocto-docs rev: c13e441e9bbe3a451a59e5123b772426d36183ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note at the bottom clearly stating TAR files are never
used as a substitute for RPM, DEB, or IPK files when generating
your image or SDK.
(From yocto-docs rev: 8d45ac58926de4fb01156eccd53cfa0f3eca4d9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The text used "packages" rather than "recipes." This is a
tragic result of historical naming mistakes early in the project.
(From yocto-docs rev: 0492b458f249f0c4cec6fa3cdd73ab7ca1f1506e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the formatting of the second instance of the
term "systemd".
(From yocto-docs rev: 46696db9869318d8df026a2761d6d8c70e7b3b55)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor re-wordings here.
(From yocto-docs rev: 4f60a44520263e3ef3c885a27fcaba1ef8b63609)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the rootfs_deb, rootfs_ipk, and rootfs_rpm classes
altoghther and opted to briefly describe their purposes in the
rootfs* class section. I also am not linking to the IMAGE_FSTYPES
variable but am rather linking over to the PACKAGE_CLASSES
variable.
(From yocto-docs rev: 5e92a1d4f489d5b48f5dbaac7c75ab1a1014e220)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out you can specify this using the PACKAGE_CLASSES
variable but you better not list it first.
(From yocto-docs rev: 9b160b15b3508e360fd57ac4375867d58cdc9709)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was pathetic and needed updating.
(From yocto-docs rev: 30996e88a8ca26d57f748fc8232bb26e0ff6c433)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered some issues with this description. Should be
referencing the Build Directory for where the local.conf file
is and not the Source Directory. Also, the link to the
package.bbclass section was mis-titled.
(From yocto-docs rev: 38daa12eae5303a70cf210f8669e416b161b38bc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sorting out who assumes what.
(From yocto-docs rev: f02312e300ce7749a7a5347538ece26f5cfa76bf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the links in the icecc class that linked into ICECC_CC,
ICECC_CXX, and ICECC_VERSION so they don't link anymore but rather
give a very brief explanation of what the variable does.
Removed the above three variables from the variable glossary.
These are not BitBake variables and we should not document them.
(From yocto-docs rev: f4f79d27c0d1417ff683381f18f165cda3a8a02e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor changes to the SYSTEMD_PACKAGES, SYSTEMD_SERVICE, and
SYSTEMD_AUTO_ENABLE variables.
(From yocto-docs rev: 838eb9088ec20a265e785d4203e4e5084fd4a7c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added links to USERADD_PACKAGES, USERADD_PARAM, GROUPADD_PARAM,
and GROUPMEMS_PARAM
(From yocto-docs rev: 4b9d23c205f687a6c43efd9f504a7cc9815dc835)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
icecc - added link to Icecream.
images - added some reference links to the end of the section.
logging - added closing ")" character.
nativesdk - corrected the mis-copied recipe name.
own-mirrors - fixed the class name so it was not "ownmirrors".
package - minor tweak to indicate class. Also spelled Berkeley
correctly.
package_deb, package_ipk, and package_rpm - dumped a note and
mentioned that you need PACKAGE_CLASSES to enable the
class.
package_tar - noted that the recipe inheriting the tar class is what
does the trick here.
pixbufcache - minor edits
populate_sdk - minor edits
prserv - edits to tell how it is enabled.
pythonnative - re-worded it.
rootfs* - reworded.
rootfs_deb, rootfs_ipk, and rootfs_rpm - Brand new.
systemd - reworded.
terminal - rewording
useradd - reworded
(From yocto-docs rev: a668eb6e70f416c0818253b0d3456c4f5f6ec050)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added opening reason for the icecc class. Also cleared up the
sentence describing ICECC_PATH.
Minor fix to image class. Also added some reference
links.
Minor fix to image-mklibs class. Also combined rouge
sentence stating that the class in enabled.
Same fix to rogue sentence in image-prelink class.
Fixed "insserve" into "insserv" throughout.
Added many links to some missing classes in the kernel
class. Subsequent commit to actually add the class
documentation.
(From yocto-docs rev: 150de3e52d6c8c775b1128118e7d6eff51014c4e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
extrausers - Changed the note to try and describe that the
change is still specific to an image recipe but is not
tied to other individual recipes.
fontcache - Minor fix.
gtk-icon-cache - fixed capitalization issue.
gtk-immodules-cache - Minor fix
gzipnative - Minor fix.
(From yocto-docs rev: 8cf810bf7b1c030c831205526303af7dd73cf6be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a link in the deploy class.
Re-wrote the bugzilla class to be clearer.
(From yocto-docs rev: 4bb975a0e12c9d38e941f1cf913c042498f06976)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modifications to ccache, chrpath, clutter, cross, cross-canadian,
crosssdk, and debian classes.
Added a new variable to the glossary for LEAD_SONAME.
(From yocto-docs rev: f27b6315f839a731017866106578e664c6c86982)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some review edits from Paul Eggleton for the following
classes:
allarch
base
bin_package
bugzilla
buildstats
(From yocto-docs rev: fe6b688106c5444fe6306326751ce636894acfd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was there because we did not document all the
classes in meta/classes. Now that we are I am dumping it.
(From yocto-docs rev: 3c704fcf8b9e6684d40f0df2069c4e17989ad129)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also had to update four instances in the variables glossary where
links to the section for the class became misnamed due to
stripping out the excess stuff from the class section heading.
(From yocto-docs rev: d98d3848327950c5c5cfc8559379e56c97157ad2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to also fix a couple links in the "migration" chapter due
to the section heading of the packagegroup.bbclass section
changing.
(From yocto-docs rev: bf71e6ee1812b54ba8afafa9818eb718c3bd2f82)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Forgot the part about the class being automatically enabled
when using the Hob.
(From yocto-docs rev: e15b52fc703f2bc4c02e2afe05de1cc4d057b685)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, we were documenting the "package*" class and lumping
the "package_deb", "package_rpm", and "package_ipk" classes in
that entry. Really, we need to break out the "package" class on
its own and create entries for the sub-classes that were being
bundled in there. Additionally, we needed to document the
"package_tar" class.
(From yocto-docs rev: 608edf7eaa264d5e20c6ffb5d2a6173d38b42ebc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Noticed that this class file name is "image_types.bbclass" and not
"image-types.bbclass". Fixed it.
(From yocto-docs rev: 594cc933c919b7b84248c670ed7563bd23b8597d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note to the existing IMAGE_FSTYPES variable based on
using "live" as an image type. Need to be sure that appears
before inherit line in the recipe.
(From yocto-docs rev: 1fc45b2bc7c70f00882d495d659830b94eb7d2df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I accidently removed this so had to add it back in.
(From yocto-docs rev: 928bc686735fb8bc80df2a8c070846c33ca6aa3c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Told where to set this variable.
(From yocto-docs rev: f95fb5821383721da6a63bb8eb74807e89e6b21d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created glossary entries for the GRUB_GFXSERIAL, LABELS,
APPEND, GRUB_OPTS, and GRUB_TIMEOUT variables.
(From yocto-docs rev: 31bcc25866525ef998bc01e11ab9ddb0601b8ded)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I put this name in wrong in the original commit.
(From yocto-docs rev: 654ba14a17886b5743e6732f825a693375d264cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The entries for gtk-icon-cache and mime are placeholders only
with this commit.
(From yocto-docs rev: 8652cc5d4fe880768e746a80dde82513c5d83a09)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Otavio Salvador
Dennis Meier
Chengwei Yang
Jonas Eriksson
David Nystrom