Currently fontconfig support is autodetected. It is better to be
deterministic. Since qtbase-fonts is not installed where fontconfig
will find it, it seems that current users are not using fontconfig.
Signed-off-by: Philip Craig <phil@blackmoth.com.au>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The proper 'virtual' name for EGL is virtual/egl, not virtual/libegl,
as per meta/recipes-graphics/mesa/mesa-common.inc.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
0018 - Offset support for QOpenGLPaintDevice is required for
speedup WebKit hardware rendering.
0019 - Fix FBO restoring in QOpenGLTextureGlyphCache
Jira task
0020 - Uses right texture format to exclude extra convertion.
Signed-off-by: Alexander Irhin <alexander.irhin@lge.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
- fonts were not installed (at least in qt 5.0.2) so install
them manually.
- split the font package in smaller package as done in qt4 to
save space on the target.
- use OE_QMAKE_PATH_LIBS which corresponds with:
mkspecs/features/qpa/genericunixfontdatabase.prf: fonts.path = $$[QT_INSTALL_LIBS]/fonts
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* all patches applied in recipes should be also applied in
https://github.com/meta-qt5/qtbase branches to make it
easier to upgrade to new version without loosing any
patches
* apply:
0013-Disable-mkv8snapshot.patch
0014-enables-tslib-device-to-be-read-from-env-variable.patch
0015-qtbase-allow-build-of-examples.patch
also for git version, only
0016-configure-add-tslib-support.patch
is now 5.0.2 specific (similar patch already applied in stable branch)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
- the tslib support is not enabled by default and configure doesn't have any option
to active it, so add the option to the build system,
- patch tslib support to get the device from the environment variable
(patch taken from https://github.com/prabindh/qt-configs/blob/master/qt5_1.0_Feb13/tslib.patch
- provide variable to enable tslib support in a bbappend (disabled by default)
- tested on an i.MX5x target with qt 5.0.2
TODO : test with 5.0, 5.0.1 and _git
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* drop Change-Ids, add Upstream-Status
* 0010-qmake-property-rename-QT_INSTALL_CONFIGURATION-to-QT.patch was
rejected upstream, 0007 was only in meta-qt5/qtbase repo, but wasn't
used in recipes
* 0004-Disable-mkv8snapshot.patch and
0005-AddSynchoronization-qimagereader.patch are special, because they
are applied only to 5.0.0
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* endian option was removed from configure
* arch/host-arch option is now deprecated and configure shows
warning when it's used
* both are now autodetected
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* makes it easier to change desktop gl to gles2 in .bbappend
* we cannot explicitly disable opengl with -no-opengl, because then it
fails to build (probably only when mesa headers are found in sysroot)
/qtbase-opensource-src-5.0.0/src/platformsupport/eglconvenience/qeglplatformcontext.cpp:62:72: error: 'QPlatformOpenGLContext' has not been declared
/qtbase-opensource-src-5.0.0/src/platformsupport/eglconvenience/qeglplatformcontext.cpp: In constructor 'QEGLPlatformContext::QEGLPlatformContext(const QSurfaceFormat&, int*, EGLDisplay, EGLenum)':
/qtbase-opensource-src-5.0.0/src/platformsupport/eglconvenience/qeglplatformcontext.cpp:69:70: error: invalid static_cast from type 'int*' to type 'QEGLPlatformContext*'
The same with 5.0.2
Signed-off-by: Simon Busch <morphis@gravedo.de>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* "${B}/*" in quotes doesn't match anything, better to remove whole directory
(incluing .files) and recreate it
* not sure why I've added quotes after testing first version, we don't
expect B with spaces.. but I'm a bit scared with rm -rf ${SOME_VAR}
after one glibc upgrade cleaned my whole disk and attached NFS array
when OLD_LOCALE_PATH wasn't detected correctly...
* qmake works well with separate B, use it by default
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* all variables should be now correctly set by qmake
* setting PARALLEL_MAKE in MAKEFLAGS can cause
PARALLEL_MAKE * PARALLEL_MAKE processes, because first
-j is applied on top level directory and then again in
each subdir, but it's faster then make -j PARALLEL_MAKE
only in top directory
* setting QMAKE breaks build in src/tools/bootstrap, because it
forces relative path bin/qmake which isn't correct
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* makes it easier to change them, should be reused also in FILES_*
variables
* table of path variables and their different names available at
https://github.com/meta-qt5/meta-qt5/wiki/Building-with-OE
* all variables have OE_QMAKE_PATH_ prefix and then name from qmake
varaible
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* don't export it, let recipe decide where to call it or even if it
should be called (native recipes are not using it)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* otherwise sysroot from native build can leak to target build
* missing paths like Qml2Imports were defaulting to devault /usr/qml
* synchronize values between qt.conf and configure params
* qt_module.prf replacements were creating -L/usr/lib in .pc files which is bad for cross-compilation
* also use '=' for sysroot in libtool files
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* using ${libdir}/${QT_DIR_NAME} is causing pkgconfig files to be
installed in this prefix too
* modify ArchData variable to move mkspecs files to qt5 prefix (so that
they don't conflict with qt4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* add linux-oe-g++ mkspec directly with patch
* add functions to read and eval OE_QMAKE functions from mkspec and
also export them with QMakeVar to be available also for config.tests
* add external-host-bindir parameter to skip building native tools
even when we're in fact cross-compiling (because we have them from
qtbase-native build already).
* use separated ${B} and ${S} and clean ${B} when reconfiguring
stalled qmake cache can be used when configure is reexecuted
cleaning ${B} prevents that and provide cleaner separation
* OE_QMAKE_AR cqs is added by Makefile, having it here too was causing
issues
* isEmpty(QT_EXTERNAL_HOST_BINS) doesn't work, so lets use exist()
even when it allows to incorrectly set wrong directory and build
native tools again (instead of skipping them)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* g++.conf and linux.conf were outdated a lot, lacking new options like
QMAKE_COMPILER causing a lot of warning like:
Project WARNING: qmake spec does not announce the compiler family. Guessed gcc.
* Instead of replacing whole common files, use custom qmake.conf which
overwrites common setting after including it
* fix paralel build
* default make does good job, cleans mkspecs, installs all headers and
libs needed for qtjsbackend-native
* move native tools to QT_DIR_NAME prefix, this way qt4 and qt5 can be
staged at the same time
* only variables referencing WORKDIR are now QMAKE_PRL_BUILD_DIR
./x86_64-linux/usr/lib/libQt5Network.prl:QMAKE_PRL_BUILD_DIR = /OE/oe-core/tmp-eglibc/work/x86_64-linux/qt5-native/5.0.1-r0.0/qtbase-opensource-src-5.0.1/src/network/
./x86_64-linux/usr/lib/libQt5Xml.prl:QMAKE_PRL_BUILD_DIR = /OE/oe-core/tmp-eglibc/work/x86_64-linux/qt5-native/5.0.1-r0.0/qtbase-opensource-src-5.0.1/src/xml/
./x86_64-linux/usr/lib/libQt5Bootstrap.prl:QMAKE_PRL_BUILD_DIR = /OE/oe-core/tmp-eglibc/work/x86_64-linux/qt5-native/5.0.1-r0.0/qtbase-opensource-src-5.0.1/src/tools/bootstrap/
./x86_64-linux/usr/lib/libQt5Concurrent.prl:QMAKE_PRL_BUILD_DIR = /OE/oe-core/tmp-eglibc/work/x86_64-linux/qt5-native/5.0.1-r0.0/qtbase-opensource-src-5.0.1/src/concurrent/
./x86_64-linux/usr/lib/libQt5Core.prl:QMAKE_PRL_BUILD_DIR = /OE/oe-core/tmp-eglibc/work/x86_64-linux/qt5-native/5.0.1-r0.0/qtbase-opensource-src-5.0.1/src/corelib/
./x86_64-linux/usr/lib/libQt5Test.prl:QMAKE_PRL_BUILD_DIR = /OE/oe-core/tmp-eglibc/work/x86_64-linux/qt5-native/5.0.1-r0.0/qtbase-opensource-src-5.0.1/src/testlib/
./x86_64-linux/usr/lib/libQt5Sql.prl:QMAKE_PRL_BUILD_DIR = /OE/oe-core/tmp-eglibc/work/x86_64-linux/qt5-native/5.0.1-r0.0/qtbase-opensource-src-5.0.1/src/sql/
./x86_64-linux/usr/lib/libQt5DBus.prl:QMAKE_PRL_BUILD_DIR = /OE/oe-core/tmp-eglibc/work/x86_64-linux/qt5-native/5.0.1-r0.0/qtbase-opensource-src-5.0.1/src/dbus/
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* we also had PROVIDES for qt5-tools-native, this makes it a bit easier to see what is what
* drop FILESEXTRAPATHS, not needed after renaming to match BPN with qtbase patches
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Philip Craig
Nicolas Dechesne
Alexander Irhin
Eric BENARD
Martin Jansa
Oleg Shparber
Simon Busch
Mikko Levonmaa
Mikko Levonmaa