We need to manipulate the stamps when removing WORKDIR to indicte that
tasks like compile or install can't just rerun. The most effective method
to do this is to convert the layout to match that which would have been the
case had the system been build from sstate packages.
For example, we'd task stamps like:
xxx-1.4.7-r3.do_compile
xxx-1.4.7-r3.do_configure
xxx-1.4.7-r3.do_fetch
xxx-1.4.7-r3.do_generate_toolchain_file
xxx-1.4.7-r3.do_install
xxx-1.4.7-r3.do_package.emenlow
xxx-1.4.7-r3.do_package_write
xxx-1.4.7-r3.do_package_write_ipk
xxx-1.4.7-r3.do_package_write_rpm
xxx-1.4.7-r3.do_patch
xxx-1.4.7-r3.do_populate_sysroot.emenlow
xxx-1.4.7-r3.do_setscene
xxx-1.4.7-r3.do_unpack
and after rm_work, we'd have stamps of:
xxx-1.4.7-r3.do_package_setscene.emenlow
xxx-1.4.7-r3.do_package_write_ipk_setscene
xxx-1.4.7-r3.do_package_write_rpm_setscene
xxx-1.4.7-r3.do_populate_sysroot_setscene.emenlow
We also need to handle stamps in the form xxx-1.4.7-r3.do_package.MACHINE.TASKHASH
as used by some signature generators.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit changes the sysroots path to be machine specific.
Changes includes:
1) STAGING_DIR_TARGET and STRAGING_DIR_HOST points to machine specific
paths.
2) task stamp files. Adding ${MACHINE} info into stamp files for
do_populate_sysroots and do_package tasks. Add a BB_STAMPTASK_BLACKLIST
to keep native, nativesdk, crosssdk, and cross-canadian stamp unchanged.
3) siteconfig path. Separate the site config path for different machines
to avoid one machine adopting the cache file of another machine.
4) sstate. Add machine name to sstate manifest file.
Change relocation code for sstate paths since sysroot is machine.
Keep native, nativesdk, crosssdk, and cross-canadian unchanged.
5) toolchain scripts. Change the environment path to point to machine
specific sysroots in toolchain scripts bbclass.
6) Relocate la files when populating to a different machine of the same
architecture.
7) Exclude STAGING_DIR_TARGET and STAGING_DIR_HOST parameter from sstate
siginfo since they contain ${MACHINE} information.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Some steps (like gcc-cross-initial, gcc-cross-intermediate and eglibc-initial)
will install to new locations to avoid file overwriting.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
By default the linux-yocto recipes operate on the current branch
and use it as a trigger to locate the description of a board. This
model works well when using the git repo outside of a build system
since the commands can be simply invoked and will do something
useful. However, it does mean that you can't have two BSPs that
differ only by configuration, building out of a single branch
in the repository.
This means that you must have many branches for very similar
BSPs. This model is still preferred, but having the choice of
branching strategies is better.
With this change we can have multiple BSPs using a single branch
with the preferred description being hinted from the build
system by passing the $machine value to updateme/configme.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
If build from sstate results, the ${D} will not be installed. In this
case the creation of ipk package will be skipped, which will cause
the build failure.
Fix the issue by removing the judgement of ${D} existence.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Original we used absolute path in sysroot-destdir for both native and
target recipes. This commit changes target recipes to use relative path
which is same as the image directory.
[sgw: merged with libtool sysroot work]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
libtool v2.4 --with-libtool-sysroot eliminates the need for
la mangling.
Based on Khem Raj's OE commits.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
We do not do it for native recipes, as the native compiler should
fall back to a prefix of /usr and not solely depend on the sysroot.
Otherwise we end up staging everything in the native sysroot before
we start to build target recipes.
Also remove la mangling code, which is no longer necessary.
Commit derived from Khem Raj's OE commits.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
LSB library checks will look for some symbols of qt4 libraries. Enable "accessibility" and "sm" in order to pass the LSB test.
Signed-off-by: Jingdong Lu<jingdong.lu@windriver.com>
When using python recipes imported from OE (e.g. python-cheetah) parsing only succeeds when python has already been built due to the PYTHON_DIR references.
This commit syncs the classes with OE to make it work, but keeps the *.pyo removal from yocto.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
This will be used later on when updating the distutils classes
A small deviation from OE is the use of PYTHON_BASEVERSION instead of non-deterministic python code. See https://lists.yoctoproject.org/pipermail/poky/2011-January/002320.html for some background info
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
remove sanity check for SDK_ARCH=i686 due to recent fixes in cross toolchain areas, etc. the old issue no longer exists
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Fixes "multiple repeat" or "nothing to repeat" errors when parsing recipes
with '++' in the file name.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
If PATCHRESOLVE is set to "noop", then it isn't supposed to try and
resolve patches at all, and thus does not need TERMCMD. Therefore,
make sure Poky doesn't check for (and possibly fail at finding)
TERMCMD if it isn't needed in the first place.
Signed-off-by: Derek Buitenhuis <dbuitenh@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
To reduce the time on sanity testing, we remove variable SHARE_IMAGE and use
a new variable TEST_SERIALIZE in local.conf. It is by default set to 1. Poky
will copy and boot the to-be tested image for only once. It will not remove
or kill the image and test cases will be serialized executed against the same
image. If it is set to 0, image is always be copied for each cases, which takes
much time. I had a experiment that latest qemuppc sato only takes 7 minutes to
finish 9 sanity test cases, which takes more than 20 minutes before.
I also removed sanity case "boot" from sato/sdk/lsb because the other cases for
these targets already cover the check point of "boot".
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
Updating gtk+ to 2.23.2 requires gdk-pixbuf, which is originaly a module in gtk+.
Borrow hardcoded_libtool.patch from original gtk+, and add configure_fix.patch
to fix build failure in cross-compile environment.
As gdk-pixbuf is a stand-alone package now, gdk-pixbuf-csource-native can be
safely removed. So extend gdk-pixbuf with native support, and make related
packages depend on it.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
The previous implementation of invalid commit ID checks would
error early when a bad object was detected. Rather than changing
to set +e for the entire routine, we'll capture the output and
do an explicit check for a bad object and throw a useful error
message when it is detected.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
By setting BOOTSTRAP to the branch that should be used for a
currently undefined BSP a build can be completed and an
environment for streamlining the BSP created.
With the appropriate machine.conf, and a defconfig any MACHINE
can be built against and inherit the configuration of the
standard yocto kernel.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Keep the la files in source directories unchanged,
and do relocation in destination directories (sysroot-destdir).
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
{e}glibc should install the scsi/*.h files, which are needed by hal.
Currently hal can build because eglibc-initial (which has its own do_install)
installs the files. In future eglibc will have its own sysroot, so hal
won't build.
BTW: in OE side, eglibc's do_install also doesn't remove the files.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Fixes [BUGID #595]
Because of the QEMU booting slowness issue(see bug #646 and #618), autobuilder
may suffer a timeout issue when running sanity test. We introduce variable
SHARE_IMAGE here to fix the issue. It is by default set to 1. Poky will copy
latest built-out image and keep using it in sanity testing. If it is set to 0,
latest built-out image will be copied and tested for each case, which will take
much time.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
This makes 'kernel-modules' installable again when perf isn't enabled in the kernel config
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Yu Ke
Dongxiao Xu
Dexuan Cui
Bruce Ashfield
Saul Wold
Scott Garman
Jingdong Lu
Koen Kooi
Jessica Zhang
Paul Eggleton
Mark Hatle
Jiajun Xu
Zhai Edwin
Beth Flanagan