Fix the following QA warning:
WARNING: bash-4.3.30-r0 do_package_qa: QA Issue: bash rdepends on libiconv,
but it isn't a build dependency, missing libiconv in DEPENDS
or PACKAGECONFIG? [build-deps]
(From OE-Core rev: 5c6b10c7c37d9ca216d56c1667dce29998a2f525)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the following QA warning:
WARNING: popt-1.16-r3 do_package_qa: QA Issue: popt rdepends on
libiconv, but it isn't a build dependency, missing libiconv in DEPENDS
or PACKAGECONFIG? [build-deps]
(From OE-Core rev: 08aeb5a9e0067e2e9e0fba8614409102e5a0a00e)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
krb5 is needed to enables GSS-Negotiate authentication
(From OE-Core rev: 78811b6e608452a3137df6ed2346c69d42d8fd27)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test is a subset of the new sstate_noop_samesigs test, and less helpful
when it breaks, so remove it.
(From OE-Core rev: 7157261014e1dcbe9a57e7504dbb0ab2a53aa4d8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise the build can fail or there is a floating dependency on whatever SSL
library Mesa can find.
(From OE-Core rev: 8ce5d90044bd371d132312e85197ee262855ad29)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the autotools default configure commands and just tell autotools
where to run configure from.
This fixes the build when running on an aarch64 host, which the prebuilt
configure scripts with glibc 2.22 do not recognize.
(From OE-Core rev: 33d4c758a5d71435437dde74556d32404d91342f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The parameter workdir is not used in package_qa_check_license()
(From OE-Core rev: 9da177c149c657dc337a1f0d241175f1496fa07d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu-native was optionally depending on libxext-native if the DISTRO_FEATURES
included x11. This dependency was required back when we didn't build
libsdl-native and causes an undesirable relationship between DISTRO_FEATURES and
qemu-native.
As the dependency isn't required anymore, remove it.
(From OE-Core rev: f58f364b1ae97805abc5f9eb7b300617f59826b2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
webkitgtk ported to CMake long ago, so by definition can't use gnome-common's
autoconf macros anymore.
(From OE-Core rev: 90890eca6cbefb42f1e63231c93dfe4de4dab014)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gnomebase class already depends on gnome-common-native, so there's no need
to depend on it again.
(From OE-Core rev: da33549ea6cb2082ef908480825ffcac07814c16)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gnomebase class already depends on gnome-common-native, so there's no need
to depend on it again.
(From OE-Core rev: 13621e8ac158e1eb65a04054899f7cdec796d38f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is possible for a Node.js module to have node_modules subdirectories
that contain no package.json file (e.g. iotivity-node has such a
directory). It appears these should simply be ignored, or else with the
way the current code works we will get errors later.
(From OE-Core rev: 8c522f1f536270e195c8c73f5c72801495e7b33b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
armv7a is a subset of armv7ve:
https://gcc.gnu.org/onlinedocs/gcc/ARM-Options.html
-march=armv7ve is the armv7-a architecture with virtualization extensions.
By inheriting armv7a from armv7ve it's possible for e.g. Cortex-A15 machines
to include tune-cortexa15.inc and have a full range of optimizations, but
set DEFAULTTUNE as "armv7a" to produce binaries compatible with Cortex-A8
machines, etc.
(From OE-Core rev: 5bf5e68e540dc4e034288702094d306ebd19fef9)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is an initial support of fitImage signature to enable U-Boot verified
boot. This feature is implemented by adding a signature tag to the
configuration section of the generated fit-image.its file.
When a UBOOT_SIGN_ENABLE variable is set to "1", the signature procedure is
activated and performs a second call to mkimage to sign the fitImage file and
to include the public key in the deployed U-Boot device tree blob. (This
implementation depends on the use of CONFIG_OF_SEPARATE in U-Boot.)
As the U-Boot device tree blob is appended in the deploy dir, a dependency
on 'u-boot:do_deploy' is added when the feature is activated.
(From OE-Core rev: 38d675f568ed67505896f20dd9738ce80feece08)
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This introduces a new variable to set the device tree compiler options while
calling mkimage ('-D' option). By default, this variable is not set but it can
be defined in a configuration file, as following example:
UBOOT_MKIMAGE_DTCOPTS = "-I dts -O dtb -p 2000"
(From OE-Core rev: 9a3f541da305c75418c2eec75ade902717a01b69)
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This enable the deployment of u-boot-nodtb.bin and u-boot.dtb files.
(From OE-Core rev: 396a3fb0f55a443f73d6ddd99d8ba83412db2d40)
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This introduces a new uboot-sign.class to support U-Boot verified boot.
This part delivers the new class file, with related environment variables, and
a new task intended to run before do_install task and which performs the
concatenation of the u-boot-nodtb.bin and the device tree blob. The 'cat'
command used overrides the u-boot.bin in both DEPLOYDIR & build dir to
propagate the changes in later tasks (do_install, do_package, etc.)
(From OE-Core rev: 27e21c50ada2f5fb6296cce680da4350a229977c)
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure that this variable has a default value so that we don't get debug
messages that the variable couldn't be expanded.
(From OE-Core rev: 27fd1bb7969b558864463450e1837c4400a03f9c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without these extra space characters the messages are ill-formatted, i.e:
'The meta-qt3 layer should be added, this layer provides Qt 3.xlibraries.
Its intended use is for passing LSB tests as Qt3 isa requirement for LSB.'
Changes to:
'The meta-qt3 layer should be added, this layer provides Qt 3.x libraries.
Its intended use is for passing LSB tests as Qt3 is a requirement for LSB.'
(From OE-Core rev: f0220cd4e686c3d28d222d434f2dbd7f0b41188c)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add "-Wformat -Wformat-security -Werror=format-security" to the default
SECURITY_CFLAGS to catch potential security vulnerabilities due to the
misuse of various string formatting functions.
These flags are widely used in distributions such as Fedora and Ubuntu,
however we have 15 recipes in OE-Core which fail to build with these
flags included and thus the flags are removed for:
- busybox
- console-tools
- cmake
- expect
- gcc
- gettext
- kexec-tools
- leafpad
- libuser
- ltp
- makedevs
- oh-puzzles
- stat
- unzip
- zip
[YOCTO #9488]
(From OE-Core rev: f335f8e744fb312b3eb599c331d08a9a6e5a8ff8)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current recipe creates inittab labels based off the device node name
of TTYs used as consoles. If those names exceed the 4 character label
limit of inittab, it will break. This change takes the last 4 chars of
the device names in order to avoid any errors.
[ YOCTO #9529 ]
(From OE-Core rev: 30acc7a6b9e6d1c42ba1df6e5a362d10b43cb4eb)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some shells (e.g. dash) do not support the source built-in. This
replaces it with the dot operator.
[ YOCTO #9535 ]
(From OE-Core rev: eef010bd91933d0c4b917d12e5716aa7e16b7307)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: cb6388a6527c5afa614ecf6f94808f55a06510d5)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: a2ad4c8b952e644d53ce65080f32d71bdd400a3f)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 60b7a50665b31b2b5a8884a1a08f84d9a04a1a7b)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 164c4c82387152310e557d43ccfa15f4275342ee)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patches still apply and only needed their line numbers updated, with the
exception of one backport from 1.7.1, which is no longer needed.
(From OE-Core rev: b982c73d6837ddd737e90911f1b9fdd2830ca876)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gst-inspect patch no longer applies, and according to upstream, is
not needed.
(From OE-Core rev: 78ae58c25f8084aab3cba66c9c50b34341f45c3c)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 1a0e56630c5c27d8899dd0979ae0b86bbe227881)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 9566c3bb7c95d42973e63f672522e13bebf3ccd7)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add two values for http_proxy to verify that changing it doesn't change any
unexpected tasks.
As this causes uninative to fail to fetch, ensure that uninative is always
disabled.
(From OE-Core rev: 7d8ffd22303a5b89cb129e804c124a2d1dedf9ab)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A patch is needed to fix a race in out-of-tree builds, and the install-ptest
logic can be simplified.
(From OE-Core rev: 471fdafb340e90a4ab2e31854f69d5204e9380bf)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that MX inherits gtk-doc we can also remove fix-build-dir.patch.
(From OE-Core rev: e8d4e80e5cc98e2e0470c85f3c08574d30d466c1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* While building following warning comes up
QA Issue: No GNU_HASH in the elf binary: '...libcups.so.2' [ldflags]
Fix this warning by settin DSOFLAGS.
(From OE-Core rev: 5dfbdf6d370125841d10120f39e8b771d1ed8aef)
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case of chained conversion methods are used via COMPRESS_CMD_*
there is chance that some of steps would be executed multiple times.
[YOCTO #9482]
(From OE-Core rev: 94f61c2682e5cfd819ac84535650c3e0a654415a)
Signed-off-by: Alexander D. Kanevskiy <kad@kad.name>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As it's not 1978 anymore, nobody is using ar for anything apart from static
archives. If people are using static archives, then binutils provides a far
more capable ar.
(From OE-Core rev: 664a7743a7a2dd6a5c3676c06c35b692af2907e2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. redirect the stderr output of the command exec with -l option to
/dev/null.
Because when we run command exec with -l option in builtins.tests,
it is a login shell, so it would read the file /etc/profile, that
file executes the /usr/bin/resize which added by commit:
cc6360f4c4d97e0000f9d3545f381224ee99ce7d
The /usr/bin/resize is produced by busybox that source code resize.c
contains:
fprintf(stderr, ESC"7" ESC"[r" ESC"[999;999H" ESC"[6n");
In the end, it outputs an escape sequence to the stderr, so when we
compare the test output file /tmp/xx with builtins.right, it failed.
we need to redirect the stderr output to the /dev/null to solve the
problem.
2. ensure the target system contains the locales "en_US.UTF-8".
Because when run the run-builtins, it executes the source5.sub file
that contain:
LC_ALL=en_US.UTF-8
such as add the following to the local.conf:
IMAGE_LINGUAS_append = " en-us"
(From OE-Core rev: 5f82f3df7d4a7d6ae9a1ea3b6bc1d620a3d6c329)
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport 2 patches from v1.2-rc1 tag of libunwind git repo.
These patches add aarch64_be support to this package.
(From OE-Core rev: 396353c3127b20244c4c5cc321adad7d4e48f544)
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
IMAGE_CMD_xxx commands are always inlined within do_image_xxx.
When IMAGE_CMD_xxx is defined as a function (e.g. IMAGE_CMD_btrfs,
IMAGE_CMD_cpio, etc), a redundant copy of the function will be emitted
by default. Remove IMAGE_CMD_xxx 'func' flags to prevent that.
(From OE-Core rev: 118c1ca4d8d62162e87caf287f96d90707ee5903)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit a19cfee10c1f1762da601125c17035cf7701ce91
Author: Christopher Clark <christopher.clark6@baesystems.com>
Date: Thu Apr 14 17:00:20 2016 -0700
linux-firmware: break out bnx2 mips firmware and WHENCE license
Break out the bnx2 mips firmware into an independent subpackage.
Since the bnx2 firmware license is contained in the common WHENCE file
also package that separately so that other firmware that is licensed
within that file may depend upon a standalone package containing it.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
(From OE-Core rev: a73a316429b256061a7aa48bcf29c5f96df68a8c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_split_package() constructs a list of packages that were created as it
iterates through the files, so if multiple files go into the same package then
the package will be repeated in the output.
Solve this by using a set() to store the created packages so that duplicates are
ignored.
(From OE-Core rev: b251f8b212f16b16b88183cc9a959d8cfa24fe3c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit e69525: "kernel: Build uImage only when really
needed" hardcoded target kernel image to zImage for
case if uImage is generated by OpenEmbedded buildsystem.
However not all kernel architectures support zImage
target, for example AArch64 doesn't, so building of
kernel is failing on this step.
So instead of building zImage target that may not
exist for many architectures, build vmlinux target
that exists for all architectures.
Since kernel-uboot.bbclass uses vmlinux anyway for
creating image, there is no side effect on this change.
(From OE-Core rev: ac5d4d42a5903cbcafd7247c282df1cb98f79f08)
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes: e5f41c221356 ("task-core-tools-profile: fix valgrind for arm and
systemtap for mips")
Valgrind works on ARMv7a and above.
(From OE-Core rev: 08cbf28d70505a6564193c3df63a0c1798d5214f)
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 7e971e079cb52e9de8d95b6e4126698a1402988f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this the target gcc might not be in the sysroot
leading to configure failure.
(From OE-Core rev: 329c532db4b2124fa3f4b3ab8c4c6d6c93ca7c2f)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maxin B. John
Roy Li
Ross Burton
Tristan Van Berkom
Robert Yang
Paul Eggleton
Denys Dmytriyenko
Yannick Gicquel
Joshua Lock
Stephano Cetola
Carlos Rafael Giani
Robert P. J. Day
Noor Ahsan
Alexander D. Kanevskiy
Dengke Du
Ruslan Bilovol
Andre McCurdy
Christopher Clark
Felipe F. Tonello
Jussi Kukkonen