It let the environment variable XML_CATALOG_FILES could work
which was required by xmlto.
[YOCTO #2416]
(From OE-Core rev: 1ea74a265b3c8f36e07c3cf2c26d8e60518da5a7)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 7472037569b42386592c060d54196f0c8b9e2d5d)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are cases where software after boot may need to know the
current boot disk. Under the current system, it is not guaranteed
which disk is the boot. While /media/sda is a good guess, it
isn't always right, nor is it a good assumption that only one boot
disk is in the system. This gives a standard path to the original
boot disk mount which can be used to, for instance, update the
syslinux file on the boot media with a newer kernel, or updating
the boot parameters to add user options for future boots. Knowing
which disk is the boot media keeps from updating the non-boot
disk when for instance multiple syslinux boot medias are plugged in
(ie ensure correct syslinux is updated when the booted system is
updated).
(From OE-Core rev: 2be3b2607fd164d18498299dbfc020ff17dd2ca9)
Signed-off-by: Brian Lloyd <blloyd@familyhonor.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(This patch was originally done against init-install.sh in
OE-Core rev 358f0584d779825307eec08c023b5ff14e72cf9e)
Previously, only unremovable hard drives are searched and are treated
as candidates of target disks to intall into.
However, it's possible that we're going to install the live image into
a removable media such as an USB. This patch enables this possibility.
In addition, this patch presents more information about the hard drives
so that user may have more knowledge about which hard drive they are
going to install their image into.
(From OE-Core rev: 7386acf4ab63a5959e4907b29459b767f2bf2fdb)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(This patch was originally done against init-install.sh in
OE-Core rev aa67b1333b4774e1845f562085f7048df65a644f)
Previously, the boot partition was created for the target hard drive
but there was no corresponding entry for it in /etc/fstab. Besides,
even if the boot partition was mounted, it would just result in odd
directory hierarchy like /boot/boot/grub. However, what we really need
is /boot/grub. This patch fixes this problem.
Besides, for future maintance work, this patch also renames some of the
intermediate directories. It uses more descriptive names like /tgt_root
and /src_root. The name of /ssd is dropped.
(From OE-Core rev: 3b1bae7ad8d36930aae840175c6a3433c1469772)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some mmc cards do not have all the data files in /sys/block
populated. Check for existence before displaying the files
to avoid erroring out of the install process.
(From OE-Core rev: 1d73e3f9d9977382efdb0c111c556c6048bd60b4)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the race issue:
util-macros.do_package failed: 'getpwnam(): name not found: root'
The error happens when there is a half etc/passwd, fixed by:
$ install usr/share/base-passwd/passwd.master etc/passwd.master
$ mv etc/passwd.master etc/passwd
The "mv" is atomic which will fix this problem.
[YOCTO #6124]
(From OE-Core rev: cdbe55215e3dd1b82a6c147a31c7c40186a8bf80)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test suite is installed into ${libexecdir} and as that may be outside of
${libdir} the QA test needs to be silenced.
(From OE-Core rev: d354d339a38d22f1a5bca14341229d2282647fbb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a '\n' to the last line of the file to fix:
No newline at end of file
(From OE-Core rev: b3090263ba31702631270643c7a7d7af8f4d9234)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a hotkey for the GRUB 'test' menuentry. This can be used by expect scripts to boot into 'test' when doing runtime hardware tests.
(From OE-Core rev: 17b97fd6c724ba6e506cbadb18facdfd9c472e79)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init-live.sh scripts assumes that the boot label set by
the LABELS variable is either "boot", "install", or
"install-efi". If that variable is overridden to something else
we fall off the end of the case statement and the system locks
up. If the boot label is unknown, at least attempt to boot.
(From OE-Core rev: 98353862c08be2f1724aaad7aa4ed0521e3621f2)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that udev-utils package has been removed and 'udevadm' has been
moved to udev package, the initramfs-framework should also get rid
of the udev-utils package.
(From OE-Core rev: f0b8f08e13f395820172d16c9d4c016a0fbdbfe9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The udev package RDEPENDS on the udev-utils package, and the actually
udev-utils package relies on the udev package because if there's no
udev daemon, 'udevadm' command doesn't make much sense.
Now that we have removed udev-utils package and moved 'udevadm' to
the udev package in the older udev recipe, we should do the same
for systemd.
(From OE-Core rev: 393867e8818b54255271bb70bcd7b6ffea137c0a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, the udev package only RRECOMMENDS udev-utils package,
but its init script in the udev package really relies on the
'udevadm' command to work properly. As a result, if 'NO_RECOMMENDATIONS'
is set to '1', errors occur at system start-up.
The udev-utils package only contains one file, that is /bin/udevadm.
So it's better that we remove the udev-utils package and move the
'udevadm' command to the udev package.
[YOCTO #6388]
(From OE-Core rev: 4814a7a85ccff74923a554bdc11820fceff84e2e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Force probing of "platform" bus by default.
(From OE-Core rev: 6aae37c66fb6e7153b829ad860b7e7f94e804bd4)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make probing of "platform" bus conditional based on PROBE_PLATFORM_BUS
variable from /etc/default/udev-cache on subsequent boots when udev
cache is used. PROBE_PLATFORM_BUS has to be set to "yes" in order to
force probing on every boot, otherwise it uses the old default behaviour
of probing it just the first time.
This is helpful on modern SoCs where most of the low level peripheral
drivers are registered on the platform bus and need to be probed to load
the necessary modules and enable the connected buses and subsystems.
(From OE-Core rev: 70a695735e0a7d14448f2f5a9986bfe105210a91)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a partition such as /tmp mounted on a volatile directory which create
by script populate-volatile.sh from initscripts, it will show errors.
In /var/log/boot, error message:
Thu Jun 19 05:39:09 2014: bootlogd.
Thu Jun 19 05:39:10 2014: rm: cannot remove '/tmp': Device or resource busy
Check volatile directories and if it is be mounted then don't force make
it as a link.
(From OE-Core rev: cc4b0936c7a6a1563dc88d62d8c9020791eaa446)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modify checksum to match new version.
(From OE-Core rev: 6ba9162c5facc2078d3818b18e628e2a75d9ca26)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
_EOF marker was not used properly
(space left before end of line).
(From OE-Core rev: 913fd224499c57c7596bd49e1eec5f570c3edf68)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Overwriting of /etc/mtab would fail as below if the /etc/mtab link already
exist during installation phase, this patch fix this problem by checking
existance of the link before try to overwrite it.
Error message during installation if the /etc/mtab exists:
"cat: /proc/mounts: input file is output file"
(From OE-Core rev: 5cd96e28825d345650be878d4b7be4fea2996839)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For automated hardware testing, boot process control
via serial interface is needed. As such, in grub, serial
line support is added upon testmaster image install.
Also add a specific timeout to automatically start
the master image upon start of testing phase.
Tested on multiple hardware targets without issues.
(From OE-Core rev: 219228805a4d5d822894c8f6c2526e1b9a8609ff)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need use EXTRA_OECONF_append_class-native rather than
EXTRA_OECONF_class-native.
(From OE-Core rev: 5e1560b98680c79c979b8f9325f9f9997f9fd438)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found this error on CentOS 5.10, other distros may also has this
problem, I think that we can disable the selinux for dbus-native:
bus/selinux.c:327: error: array type has incomplete element type
[YOCTO #6374]
(From OE-Core rev: 7a2d2d81d8694806060f7bccfbdba42dc356d477)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The older kernel's linux/if_link.h doesn't have IFLA_VLAN_PROTOCOL, we need
check whether it has been defined or not.
The maintainer said that he would fix it:
http://thread.gmane.org/gmane.comp.sysutils.systemd.devel/18200
Also we need redefine IFLA_MAX from 34 to 35 when define IFLA_CARRIER,
otherwise there would be error:
| src/libsystemd/sd-rtnl/rtnl-types.c:233:9: error: array index in initializer exceeds array bounds
| [IFLA_CARRIER] = { .type = NLA_U8 },
[YOCTO #6380]
(From OE-Core rev: 0e626d5023fee4dbcc5d94e6b787b4c5fe4b2687)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds a binconfig-disabled class which can be used by recipes where
a -config file is installed but we wish to disable it and just rely on
the .pc files instead.
Rather than simply deleting it, we make the script "exit 1" so that it
can be found in PATH and raise a build error rather than something
silently falling back to the build system for example.
Rather than randomly finding -config files, this adds in the
specification of a list of binconfig scripts which is more deterministic
and maintainable moving forward.
This patch converts various users in OE-Core to use this, a world build
of OE-Core tests out ok with this change. There will likely be issues in
other layers however, hence this being a RFT.
(From OE-Core rev: 5870bd272b0b077d0826fb900b251884c1c05061)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If CONFIG_SYSLOGD is not enabled, then the related service file should
not be installed as it will always fail at system start-up. The error
message is as following.
[FAILED] Failed to start System Logging Service.
The same logic applies to CONFIG_KLOGD.
So we should first check the configuration before we install these
service files.
[YOCTO #5302]
(From OE-Core rev: b44e291a87539fbb8e6da1a16c56f425a417e7bd)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
on rebuilds, dbus-native can detect an already existing dbus-glib and
tries to link some tests against it. As files were unstaged and due
to libtool insanities this fails with:
| /usr/bin/grep: .../sysroots/x86_64-oe-linux/usr/lib/libdbus-1.la: No such file or directory
| sed: can't read .../sysroots/x86_64-oe-linux/usr/lib/libdbus-1.la: No such file or directory
| x86_64-oe-linux-libtool: link: `.../sysroots/x86_64-oe-linux/usr/lib/libdbus-1.la' is not a valid libtool archive
| make[3]: *** [libdbus-testutils.la] Error 1
| make[3]: Leaving directory `.../work/x86_64-oe-linux/dbus-native/1.8.2-r0/build/test'
Make builds predicatable (and working) by disabling usage of dbus-glib
explicitly.
(From OE-Core rev: 0eeeb40d2af99448c3b94047f26d33a9983a221b)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Overwriting of /etc/mtab would fail as below if the /etc/mtab link already
exist during installation phase, this patch fix this problem by checking
existance of the link before try to overwrite it.
Error message during installation if the /etc/mtab exists:
"cat: /proc/mounts: input file is output file
(From OE-Core rev: 26a5121e966f465386da4ead40cc558fd877ce2b)
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The tests are installed to $libexecdir not $libdir/glib-2.0. By default these
are the same location but they can be changed independently.
(From OE-Core rev: 73d774fa7456842690af95206b77162d5f1bcb37)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the interface is slow to come up udhcpc will continue in the background
[YOCTO #6339]
(From OE-Core rev: 45af0ba08dbc676be41fd29e9877fe820b531f7c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have this in recipes-bsp/grub/grub/40_custom:
[snip]
menuentry "Linux" {
set root=(hd0,1)
linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet
}
[snip]
These lines are only for initrdscripts/files/init-install.sh, the side
effect is that it would make the target's grub-mkconfig doesn't work
well since the 40_custom will be installed to /etc/grub.d/40_custom, the
grub-mkconfig will run the 40_custom, and there will always be a
'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we
can do this in init-install.sh rather than grub to fix the problem,
which is also much simpler.
We have done the related work in init-install.sh, now we need remove our own
40_custom, and use grub's own 40_custom which is the right one.
(From OE-Core rev: e5f6dc48930c8ff35df5cff3550ec2ee86641faf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We enable the python module in nativesdk-libxml2, but the python binary
used is in the native sysroot and thus you get the module installed in
the wrong path. Even with that fixed the python files are still
unpackaged, so create an ${PN}-python package and add them to it. (This
does not affect the libxml target build at all since python is disabled
for that.)
(From OE-Core rev: e3d06aa104065748367e1479138f824da5d9951f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The alloca() function allocates space in the stack frame of the caller,
so using alloca(new_size - old_size) would possibly crash the stack,
causing a segment fault error.
This patch fixes the above problem by avoiding using this function in
journal-file.c.
[YOCTO #6201]
(From OE-Core rev: c69816d2bf84369ba578bf9d92e01c9d91351a64)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
readline hand-maintains config.h.in so exclude autoheader and re-use a patch
from readline-6.3 to fix a typo in variable names.
See oe-core 8c37d32d6133c6ad2b9142e7a42775e7a979b570 against readline-6.3 for
further rationale.
(From OE-Core rev: 8281133c6dcb2f31666d76e282d02bafe65e15d7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of shipping a fork of the upstream aclocal.m4, simply rename it to
acinclude.m4 at configure time. We don't need the fork now that autoheader is
excluded.
(From OE-Core rev: 7b98575797c2e8822e6a26d95cb7e727d6efef4b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These recipes all use pkg-config in some way but were missing
dependencies on the tool, this patch adds them.
(From OE-Core rev: 2543b14dd0ca13005be0df027543431fc8e882ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
sulogin is provided by both busybox in /sbin/sulogin and util-linux provides one
in /usr/sbin/sulogin, so move util-linux's to sbin and setup ALTERNATIVE_LINK.
[YOCTO #6384]
(From OE-Core rev: a827ca74d27b916df8d40ec8155bc0340f8a0487)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update-rc.d treated priority numbers begin with '0' as octal
numbers. This led to problems of update-rc.d being unable to handle
priorities like '08' or '09' correctly.
This patch fixes the above problem.
[YOCTO #6376]
(From OE-Core rev: 675fd834b9ed696cd87809830d57d3da083580d3)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of shipping a fork of the upstream aclocal.m4, simply rename it to
acinclude.m4 at configure time. We don't need the fork now that autoheader is
excluded.
(From OE-Core rev: e531923c4c17becb2f1a8a89adfeff0a82961a4a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
readline ships a hand-maintained config.h, instead of letting autoheader
generate one from configure.ac. The required arguments to AC_DEFINE are not in
configure.ac so autoheader will produce warnings and the generated code will not
behave as expected.
Solve this by excluding autoheader from autoreconf, so the upstream config.h.in
is used.
(From OE-Core rev: 8c37d32d6133c6ad2b9142e7a42775e7a979b570)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
readline maintains config.h.in by hand but several symbols are incorrect. Fix
these so that the test results are reflected in config.h.
(From OE-Core rev: bc0d0c71eca48be05490209261b88b1f92bcf847)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have this in recipes-bsp/grub/grub/40_custom:
[snip]
menuentry "Linux" {
set root=(hd0,1)
linux /vmlinuz root=__ROOTFS__ rw __CONSOLE__ __VIDEO_MODE__ __VGA_MODE__ quiet
}
[snip]
These lines are only for initrdscripts/files/init-install.sh, the side
effect is that it would make the target's grub-mkconfig doesn't work
well since the 40_custom will be installed to /etc/grub.d/40_custom, the
grub-mkconfig will run the 40_custom, and there will always be a
'menuentry "Linux"' menu in grub.cfg no matter it is valid or not, we
can do this in init-install.sh rather than grub to fix the problem,
which is also much simpler.
(From OE-Core rev: 8ae89d08454c11035eb2826a06e2243c9f2568b4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mount.sh in udev-extraconf was modified to use /run/media instead
of /media. Unfortunately, our scripts in initrdscripts have some
dependency on the auto-mounting mechanism proviced by udev-extraconf.
So these scripts should also be fixed to use /run/media instead /media,
otherwise, our live image cannot work correctly.
(From OE-Core rev: be0327b6a900be5434b6b1f08277faf2f65d5da8)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of using 'ls /dev/sd*' command to list block devices, we
should rather use 'cat /proc/partitions'.
(From OE-Core rev: fc5dfad6490d0b3f2529f84ae9dfbd6b00b5c380)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The error was introduced by the following commit.
acfe3014d41de5e87cdbc58d0396349c6b9c3ffd
udev-extraconf: update mount.sh to use /run/media instead of /media
It accidently replaced 'device/media' by 'device/run/media' which causes
error for live images to be unable to boot up correctly, complaining
"Cannot find rootfs.img in /media/*".
This patch fixes the above problem.
(From OE-Core rev: 62ae16c40252f39ba28e072218d67f47b26b3535)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add a brief subject mentioning what the patch is for
* Add Upstream-Status
(From OE-Core rev: ce01282b24c6715c85f8dfac6df3e750e77a50b8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not use readlink to set ABS_GLIB_RUNTIME_LIBDIR when cross
compiling. Doing so causes host paths to potentially pollute the
target. Unfortunately in this case we don't actually convert to
an absolute path.
(From OE-Core rev: 2eb434ec298c279846ddd535a7122986558eb2c8)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade dbus to 1.8.2.
Modify ptest suite to make it enabled on new version.
If systemd in DISTRO_FEATURES, we expect to install dbus systemd
unit files.
Remove unneeded patches since it's included in new version.
Remove unrecognized option: "--with-xml"
[YOCTO #6092]
(From OE-Core rev: 596470547451084944082cbed50351ad0d912255)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder
to bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
If possible try to use any of the default FILESPATH dirs.
Also remove superfluous comment and do minor indentation fix.
(From OE-Core rev: 57109e59abb7c6af029f452d06b46f47084cff11)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
(From OE-Core rev: ae8711bc2952e96ac3434624548a3dbfd501ec7f)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4497]
Usage of FILESPATH is discouraged, since it can make recipes harder to
bbappend. Instead FILESEXTRAPATHS should be used to extend the path.
(From OE-Core rev: 435dc012734669889b12e7bbd5364e24bbace098)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd version 212 removed the TCP wrappers support, so remove the
PACKAGECONFIG stanza for it.
(From OE-Core rev: 2e7ce6b537035bfac6742214b3b2f987963fba3c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patches Fix-Werror-format-string, gio-test-race, gtest-skip-fixes, and
ptest-dbus have all been merged upstream.
Two license checksums changed as upstream has updated the FSF address in those
files.
(From OE-Core rev: b755139b8112b425ff0a21f121104b7d212e7143)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When compiling util-linux, it's possible to encounter the following error.
/bin/sh: line 2:: misc-utils/uuidd.8.tmp: No such file or directory
This is because that the misc-utils directory doesn't exist when trying to
write to misc-utils/uuidd.8.tmp.
When generating misc-utils/uuidd.8 (or anything in PATHFILES), its directory
may not have been created yet. So we need to ensure the existence of the
directory to avoid the compilation error.
[YOCTO #6292]
(From OE-Core rev: b8c0a4f6a319a7cf84530b891707a5887f3caaf4)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The SRC_URI is not accessible.
So need to add mirror site referred by the original site.
* The problem is that
http://download.savannah.gnu.org/releases redirects to closest mirror
and few mirrors (e.g. .jp) weren't working correctly while
http://download-mirror.savannah.gnu.org/releases/ seems to be reliable.
* Add SAVANNAH_GNU_MIRROR and SAVANNAH_NONGNU_MIRROR variable in bitbake.conf.
* Change the SRC_URI using the new variable.
(From OE-Core rev: af00b6544f60e4d7581f9d9767f9d3f574392359)
Signed-off-by: Changhyeok Bae <changhyeok.bae@lge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was discovered that libxml2, a library providing support to read,
modify and write XML files, incorrectly performs entity substituton in
the doctype prolog, even if the application using libxml2 disabled any
entity substitution. A remote attacker could provide a
specially-crafted XML file that, when processed, would lead to the
exhaustion of CPU and memory resources or file descriptors.
Reference: https://access.redhat.com/security/cve/CVE-2014-0191
(From OE-Core rev: 674bd59d5e357a4aba18c472ac21712a660a84af)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
baselib contains the current "lib" value so pass this into
uclibc's configration to allow multilib builds to work correctly.
(From OE-Core rev: 665b03b338d8d710250bd92d6b9a227255f808f8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some classes of recipe disable ptest even though its in DISTRO_FEATURES
(e.g. nativesdk). We shouldn't attempt to build ptest packages when
its disabled. This replaces some DISTRO_FEATURE checks with PTEST_ENABLED
checks instead.
(From OE-Core rev: 8b14fcc62f31bbbb231790136cdb984db96d9ba9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
make ldconfig default to /lib+/usr/lib, /lib32+/usr/lib32 and
/lib64+/usr/lib64 on bi-ABI architectures.
(From OE-Core rev: c90bb98d4ac14562ef4882691daed3aaa9d08504)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In poky with systemd enabled, vt102 is selected for getty
causing user to experience a very crappy terminal. Default
TERM to xterm.
Reviewed-by: Jonathan Liu <net147@gmail.com>
(From OE-Core rev: 473ff65c2f69de4ece3204fadfae7c5cb992149a)
Signed-off-by: Joel Fernandes <joelf@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to use gcc-nm and gcc-ar to deal with slim objects
which are generated when using -flto
(From OE-Core rev: e6d84c9f4fef201217ada60711ecfb94bc5dc2e0)
(From OE-Core rev: 56dc32f128b3029c38381c7cc81f244fbd77416e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class itself currently does nothing. The idea is to mark all recipes that
make use of the texinfo utilities. In the future, this class could be used to
suppress the generation/formatting of documentation for performance,
explicitly track dependencies on these utilities, and eliminate Yocto's
current dependency on the host system's texinfo utilities.
(From OE-Core rev: e6fb2f9afe2ba6b676c46d1eb297ca9cc532d405)
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows them to co-exist together in the native sysroot, with one
set of cross tools per target architecture.
(From OE-Core rev: a2c5509520d5c3e082f55844e6545d0309565f8f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The check for the config variable is using the wrong define
resulting in the #else always being used.
(From OE-Core rev: 7e498c4c17e2c1b6928d4c1fd127977bb588991f)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now Separated out libgcc-initial is there
(From OE-Core rev: 161bfc91e92a5080d3d4c27b3bebcd9c5dac01e1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If image contains dbus and ptest is in DISTRO_FEATURES, dbus-ptest package
is installed, regardless of whether ptest-pkgs is in IMAGE_FEATURES. This
issue will increase size for most small images.
This patch fixes this problem.
[YOCTO #5702]
(From OE-Core rev: 0416583f014138656babdf78a574357ae5ff25bd)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is done to work around the issue of auto-mounting block devices
(i.e. SD cards) when root filesystem is still in read-only mode and
creating /media/<device> mount-points by udev is not possible. That
is due to udev (/etc/rcS.d/S03udev) getting started earlier than
checkroot (/etc/rcS.d/S10checkroot.sh) gets a chance to re-mount the
rootfs as read-write.
Although, canonical FHS specifies /media/<device> as a mount point
for removable media devices, the latest 2.3 version was released in
2004 and since then FreeDesktop/udisks and other tools adopted the
new /run/media/<user>/<device> location. That was done to overcome
read-only rootfs limitation, since /run is usually a tmpfs mounted
partition, plus avoid name-clash between users.
For our embedded systems environment we assume single-user operation
and hence simplify mount point to just /run/media/<device>. But for
proper per-user mounting to /run/media/<user>/<device>, some sort of
session management is required along with the tool like udisks, that
is out of scope of this simple udev-based auto-mounting.
(From OE-Core rev: acfe3014d41de5e87cdbc58d0396349c6b9c3ffd)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From OE-Core rev: d83b16dbf0862be387f84228710cb165c6d2b03b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BitBake has the exact same code as oe.utils.contains so there's no
reason to duplicate it. We now rely on the bb.utils.contains code for
metadata.
(From OE-Core rev: 93499ebc46547f5bf6dcecd5a786ead9f726de28)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its useful to separate out the native (cross) binaries from the target
compilation. We already do this for libgcc, this now takes the same
approach for -initial.
(From OE-Core rev: 8a2aaf8b6bdca2d28c0047093c7f668750d57666)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Resolves warnings of this kind in the OpenPLi layer:
WARNING: Use of PRINC * was detected in the recipe *
(From OE-Core rev: 5ffb38d6ace7faae839c8cac7327b5b1c2daae1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'loadkeys' program defines its own yywrap()/yylex() functions,
there is no need to link with flex shared library.
(From OE-Core rev: 69a7c9345360b61eda79f818775656fc1aa9932c)
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When both bash and busybox be installed, without ash support
in busybox,if bash is installed before busybox in the final stage,
even if ALTERNATIVE_PRIORITY of bash > ALTERNATIVE_PRIORITY of busybox,
the symlink from /bin/sh to bash can be yet overwritten by busybox.
(From OE-Core rev: 6ef650359cc2a49376eb5ca92bc97b34cdd82862)
Signed-off-by: Wenlin Kang <wenlin.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fix the bootlogd init script header, to make chkconfig be able to work
on bootlogd
(From OE-Core rev: d1a7e5dbaa1217b692b46e2756c318e5aaa34f9d)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure that linking to the built-in.a file uses the 'nostlib'
option. Submitted to busybox mailing list here:
http://lists.busybox.net/pipermail/busybox/2014-March/080730.html
This has been accepted into upstream busybox so it will not be needed
for future versions.
(From OE-Core rev: fdfff57304e6641ef5a8db0fb456bfd46bf1e2dd)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the CCLD variable to ensure proper tuning parameters.
Notably when building on a x86-64 host with an i686 toolchain
there is an error building built-in.o because it is trying to
link 32-bit and 64-bit object files:
i686-pc-linux-gnu-ld --sysroot=/work/dmoseley/Mentor/amd-2014.05/build.genericx86-64-external/tmp/sysroots/genericx86-64 -r -o applets/built-in.o applets/ap
i686-pc-linux-gnu-ld: Relocatable linking with relocations from format elf64-x86-64 (applets/applets.o) to format elf32-i386 (applets/built-in.o) is not support
make[1]: *** [applets/built-in.o] Error 1
(From OE-Core rev: 088d2f0185da6648305b4719ee9cb0d2f2b37c6f)
Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rule SETARCH_MAN_LINKS is used for the files under the sys-utils
dir, for example:
echo ".so man8/setarch.8" > sys-utils/linux32.8
but it depends on nothing so that the sys-utils dir may not exist, we
can create the sys-utils dir to fix problem.
[YOCTO #6115]
(From OE-Core rev: 4c46bfd703409bd55a781742e4afedf88da1124b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
*fix the following error:
|stdbuf: failed to find 'libstdbuf.so'
*PKGLIBEXECDIR is the search paths for libstdbuf.so
|PKGLIBEXECDIR='$(pkglibexecdir)'
|pkglibexecdir='${libexecdir}/${PACKAGE}'
(From OE-Core rev: a0745234e78d9161d407f2157dc494fed4487d42)
Signed-off-by: Chunrong Guo <B40290-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are meant to be used by a master image, for a simple
initial setup.
The install scripts are similar to the default ones, but:
- custom partitioning, replaces the swap partiton with a second root filesystem
- adds labels to the partitions
- preconfigures a boot loader entry for the second rootfs
Part of [YOCTO #5614]
(From OE-Core rev: 39fcab00cd3b85d40966689e31b4c7748f630739)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
piglit and mesa-demos are not buildable in x11-less distros so we must
to add those only when opengl and x11 DISTRO_FEATURES are available.
(From OE-Core rev: ab0bb02d410e4f0713e75192eb217991b3f672aa)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build Appliance includes a more recent version
of poky, up to commit:
ae938eba92.
Adds bitbake fixes/optimizations;
(From OE-Core rev: f41f1b263438e19e2209876798bbcbbcee646f34)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: c48a2827a5494983dcefa70d8bebcc50e8a5fc3b)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we run "bitbake -S base-files" today, and re-run it tomorrow with
nothing changed, we would see that the do_install.sigdata changes
because of:
do_intall -> do_install_basefilesissue -> DISTRO_VERSION -> DATE
We had set:
IMAGE_NAME[vardepsexclude] += "DATETIME"
in meta/conf/bitbake.conf, we can set a similar line in
base-files_3.0.14.bb to fix the problem.
[YOCTO #6032]
(From OE-Core rev: cd06824bda76a9d08a3318e0621e31c0e8c39f74)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The qsort_r() was added to glibc in version 2.8, so there is no qsort_r() on
the host like CentOS 5.x, use qsort() to fix it since they are nearly
identical.
(From OE-Core rev: cda5310e32ce05bc54602d4c18ee2d28a53be57f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Address the error
| checking for ZLIB... no
| checking for inflate in -lz... no
| configure: error: *** Working zlib library and headers not found ***
by ensuring zlib-native is in DEPENDS.
[YOCTO #5773]
(From OE-Core rev: f7fd641c13543f0df412fe0ff01238734ddbbaff)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There might a failure when build util-linux with the meta-selinux layer:
[snip]
sys-utils/setpriv.c:21:20: fatal error: cap-ng.h: No such file or directory
#include <cap-ng.h>
^
compilation terminated.
[snip]
Use PACKAGECONFIG to fix the problem.
[YOCTO #6026]
(From OE-Core rev: 8a6b1ae336a41292ee314c04d93c2c355c772762)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The MINIX and MINIX 2 filesystems are not really used anymore.
(From OE-Core rev: 4a47c943a76e79af82d47d8fa83c6687e0d915a0)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow the user, in their local configuration, to override the size of the
final image. This is useful when creating an image for (for example) an SD
card and the user wants the image to fill up the card as much as possible.
(From OE-Core rev: 9b4ea0f2e13e52d860d59d0348a3218af151666b)
Signed-off-by: Trevor Woerner <trevor.woerner@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd does not recognize "rootfs" in /etc/fstab so the root
filesystem is not checked. As a result, the following message
is logged by journalctl:
systemd-fstab-generator[68]: Checking was requested for "rootfs", but it
is not a device
Changing "rootfs" to "/dev/root" in /etc/fstab allows systemd to
check the root filesystem when the kernel is booted with the root
filesystem mounted read-only.
[YOCTO #5950]
(From OE-Core rev: c509f948d9c575c45af8c5ed1cb1692c0ca5dade)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove genext2fs since we don't use it anymore, it can't support
ext4 well, either. We have used "mke2fs -d" to instead of it.
[YOCTO #6013]
(From OE-Core rev: ff5666bc460520aef6105e117d5431c05fd9f55b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ever since the change to how aclocal files are copied (based on dependencies),
target m4 macros seem to more reliably be used in preference to native (which
they should), but in a non-gplv3 build, gettext is 0.16 while gettext-native is
0.18, causing a 0.16 po.m4 to be used with our 0.18 po/Makefile.in.in files,
causing at least some failed builds, including e2fsprogs.
Anyone inheriting gettext will have both gettext-native and gettext available,
and we don't want to use older macros from the target gettext in a non-gplv3
build, so kill them and let dependent recipes rely on gettext-native.
[YOCTO #5964]
(From OE-Core rev: f43139adceaf8039d5347dea0a116dc5923b24c1)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5940]
Fix checks for %ms format to be a link time check
runtime checks wont work in cross compiling
Add a patch to workaround missing _SC_PHYS_PAGES
in uclibc
(From OE-Core rev: 0f5256d4ae5ed88c62e737e3c31587d7635b5dd6)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch actually makes sense for uclibc more than glibc
since if we did not cache scanf_cv_alloc_modifier configure
test will determine it correctly for glibc but the test does
not do proper job when uclibc is involved the reason is it
depends on define __GLIBC_ and uclibc unfortunately poses as
glibc and defines this variable.
%m is implemented in uclibc as well and we enable it so caching value of
'ms' specifier is going to work across all libcs
This fixes mounting errors we see with util-linux/mount on
uclibc/systemd
Mar 16 01:46:40 qemux86 systemd-remount-fs[124]: /bin/mount: /proc/self/mountinfo: parse error: ignore entry at line 21.
Mar 16 01:46:40 qemux86 systemd-remount-fs[124]: /bin/mount: /proc/self/mountinfo: parse error: ignore entry at line 22.
Mar 16 01:46:40 qemux86 systemd-remount-fs[124]: /bin/mount: can't find / in /etc/fstab
(From OE-Core rev: 0e5a1a23089c732da5c1900886360199cfe23cf9)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
DATADIRNAME is used by many applications using autotools
to install locale data, we get a wrong value for uclibc
systems since it does not recognise it as proper linux
systems and start putting locale info in /usr/lib instead
of /usr/share
(From OE-Core rev: 7897ab5f54d2dc21795b2a53b82b9c911157f0ca)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We get it from libiconv on uclibc anyway no need to
transplant uclibc one
(From OE-Core rev: 9da1e04b1543d0a08fdd679a72c9cf6455811ab9)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd needs it
Also update to latest master
(From OE-Core rev: ced5bc5537ccff89145dae1220a40ab8fd4783f5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have been using interim location for the src_uri
now the tarballs are placed in usual location so update
the src_uri accordingly
(From OE-Core rev: 58aae40bbf8edd9c5ca70b2094eeb724391f1993)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rebase native patch to remove sundisklabel as it's deprectated upstream
Update LIC_FILES_CHECKSUM for modified text, no License Changes
remove deprecated elvtune flag
Rebase the fix-configure patch due to change in configure.ac
(From OE-Core rev: f1faa0dcc6103fe720142b154ffbe3970f44d957)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds a gummiboot class similar to grub-efi class and makes the necessary
changes so it can be used for live/hddimg images as well.
One can set EFI_PROVIDER = "gummiboot" in local.conf to use gummiboot instead of grub-efi.
Gummiboot requires some kernel options that are not enabled by default, so one has to build
with KERNEL_FEATURES_append = " cfg/efi-ext".
The install scripts have been updated too, keeping the old behaviour around,
but accounting for the new boot loader config files (if they exist).
It can be argued that the installer and bootimg are a bit wierd and not necessarily correct,
but I wanted to have the exact same behviour with gummiboot.
With the default EFI_PROVIDER = "grub-efi" nothing changes, everthing should be just as before.
I've tested live boot, install and normal boot on:
- FRI2
- genericx86-64 on NUC
with:
EFI_PROVIDER = "gummiboot"
KERNEL_FEATURES_append = " cfg/efi-ext"
in local.conf.
(From OE-Core rev: b457e40fc69cc6503dc566f16495f03606e5333b)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch needs to adapt to upstream changes
should fix errors on e500mc+ based SOCs
This should fix [YOCTO #5871]
(From OE-Core rev: 6235cc3ccf98dce15ffe3313cf4e6cdf9c922bce)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop the use of custom Python code and instead use the new lnr script to
generate relative symlinks.
(From OE-Core rev: efe328d3713f60257358cab5d7c6a1d38d1a8d88)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Additional changes in ptest code since now
we have directories and not only bunch of files
under test/ dir so a simple install does not
work anymore we have to cp the files
(From OE-Core rev: e201f291b269c70d732778b34de01529aca387b5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
lttng-modules and gcc-4.8 don't mix, according to the lttng ML
'current_thread_info() not respecting program order with gcc 4.8.x',
so remove it from arm builds.
(From OE-Core rev: ccf687de7b856dbe6f347956743f07ff05c2533a)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Those recipes need PR bump so we drop PRINC from meta-fsl-arm layer.
(From OE-Core rev: b60c68a4ea937a647e13d69dfecefb7dcbda95a0)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* resolves following warnings:
WARNING: Use of PRINC 17 was detected in the recipe meta-openembedded/meta-systemd/recipes-core/systemd/systemd-machine-units_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_0.12.10.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-gpe/recipes-support/fbreader/fbreader_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-multimedia/recipes-multimedia/sox/sox_14.4.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer-common.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe meta-smartphone/meta-android/recipes-bsp/chroot-script/chroot-script_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi-ui_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-connectivity/bind/bind_9.8.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-serialgetty.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-core/sysvinit/sysvinit-inittab_2.88dsf.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/screen/screen_4.0.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow-securetty_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-extended/shadow/shadow_4.1.4.3.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/libsdl/libsdl_1.2.15.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11-xserver.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-kernel/modutils-initscripts/modutils-initscripts.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-multimedia/libsndfile/libsndfile1_1.0.25.bb (or one of its .bbappends)
WARNING: Use of PRINC 1 was detected in the recipe openembedded-core/meta/recipes-support/libcap/libcap_2.22.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-bsp/keymaps/keymaps_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 11 was detected in the recipe openembedded-core/meta/recipes-core/systemd/systemd-compat-units.bb (or one of its .bbappends)
WARNING: Use of PRINC 12 was detected in the recipe openembedded-core/meta/recipes-core/initscripts/initscripts_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 13 was detected in the recipe openembedded-core/meta/recipes-core/base-files/base-files_3.0.14.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/navit/navit_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe meta-openembedded/meta-oe/recipes-support/lvm2/lvm2_2.02.97.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-connectivity/portmap/portmap_6.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-extended/pam/libpam_1.1.6.bb (or one of its .bbappends)
WARNING: Use of PRINC 2 was detected in the recipe openembedded-core/meta/recipes-graphics/packagegroups/packagegroup-core-x11.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-efl/recipes-efl/efl/entrance_svn.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe meta-openembedded/meta-oe/recipes-multimedia/mplayer/mplayer2_git.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-bsp/formfactor/formfactor_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/avahi/avahi_0.6.31.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-connectivity/dhcp/dhcp_4.2.5-P1.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-core/init-ifupdown/init-ifupdown_1.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 3 was detected in the recipe openembedded-core/meta/recipes-graphics/xinput-calibrator/pointercal-xinput_0.0.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe meta-openembedded/meta-oe/recipes-core/meta/distro-feed-configs.bb (or one of its .bbappends)
WARNING: Use of PRINC 5 was detected in the recipe openembedded-core/meta/recipes-connectivity/bluez/bluez4_4.101.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-base.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-core/packagegroups/packagegroup-core-boot.bb (or one of its .bbappends)
WARNING: Use of PRINC 6 was detected in the recipe openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe meta-openembedded/meta-oe/recipes-navigation/gpsd/gpsd_3.7.bb (or one of its .bbappends)
WARNING: Use of PRINC 7 was detected in the recipe openembedded-core/meta/recipes-core/udev/udev-extraconf_1.0.bb (or one of its .bbappends)
(From OE-Core rev: c6825ec6e92e20bb64a051d1576f363c16e98d68)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 6.3 has fixed this issue.
(From OE-Core rev: 86f3674b402c7f3f3e0e82043936fb24d5fb5b7e)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The configure-fix.patch is used to patch configure.in in 6.2 (or 5.2),
but configure.ac in 6.3
(From OE-Core rev: 11798d94419392dc5639a770792aaee0b7920035)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The readline-6.2-patches is obsolete for 6.3
(From OE-Core rev: 66bc6f4127e88db18e260c71d181aecfd58c7999)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ln -r isn't available in older versions of coreutils such as those
present in Ubuntu 12.04. We'll find an alternative solution.
This reverts commit 65c2439ab6dcbd4c52439cdc96acb8ba222c196b.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of using a Python do_install() and calling
oe.path.make_relative_symlink, just pass -r to ln to generate a relative symlink
directly.
(From OE-Core rev: 65c2439ab6dcbd4c52439cdc96acb8ba222c196b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop 0002-static_build_fix.patch since an equivalent fix has been merged
upstream.
(From OE-Core rev: d5ff33a328a90abb6aae7c02bf119b53afdae5b7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Once send_negotiate_unix_fd failed, this failure will happen, since
auth->guid_from_server has been set to some value before
send_negotiate_unix_fd. send_negotiate_unix_fd failure will lead to
this auth be handled by process_ok again, but this auth->guid_from_server
is not zero.
(From OE-Core rev: 6e844594e7dd901eb4742730ab010030c04e1c55)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PACKAGE_INSTALL is set from the IMAGE_INSTALL variable with some additional
items, since PACKAGE_INSTALL is intended to be more an internal variable, use
it instead of the IMAGE_INSTALL which is recommeded for installing additional
packages. This will allow the initramfs recipe to use a fixed set of packages
and not be affected by IMAGE_INSTALL.
[YOCTO #5791]
(From OE-Core rev: abf40223d1412ee8f9d2b5269fad7c6aca6c2570)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we change the ROOT_HOME the sed regex does not match if we are running
the do_install() a second time, so copy the units files first to a pre_sed,
so that the next time, we can copy the the original so that the sed regex
is matched correctly in the original
[YOCTO #5765]
(From OE-Core rev: 8a60d490755c2c3010a87f2616008aee2c9cc966)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we change the ROOT_HOME the sed regex does not match if we are running
the do_install() a second time, so sed the installed file and preserve the original
so that the sed regex is matched correctly in the original
[YOCTO #5765]
(From OE-Core rev: 6007b955ce990e493a9dbf225290a9c7e133feee)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we change the ROOT_HOME the sed regex does not match if we are running
the do_install() a second time, so sed the installed file and preserve the original
so that the sed regex is matched correctly in the original
[YOCTO #5765]
(From OE-Core rev: 47d824657acc55e094d5703eed68853f2048c30c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows for setting the ROOT_IMAGE name on the kernel command line
[YOCTO #5387]
(From OE-Core rev: 00e3acde7910a5fb1d2e6b71187f2d9283319e71)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completes previous commit b5292d4115a4555a66b5e35acdc67dd71fb8577f.
Updates SUMMARY[doc] (meta/conf/documentation.conf).
Changes:
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
(From OE-Core rev: ad17dfd31a2b97b3e610a0ea0889f5ecb2a63b97)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License formatting and address for FSF in the COPYING and COPYING.LIB
has changed.
Dropped patched already upstream and patches that were workarounds for
older glibc and busybox
for e500 we have should pass --without-fp to eglibc/glibc 2.19 onwards
the code is merged from eglibc into glibc upstream under nofpu/ pretext
(From OE-Core rev: 875df27e56b82fcf970410b6d78e3672471c336a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you try to add eglibc-gconv to an image, you'll get a NoProvider
error because nothing at parse time states that it provides this (it's
added to PACKAGES in populate_packages). This problem manifests itself
in Hob for example when customising an image.
(From OE-Core rev: f9e678bd854c65e01d14c14bafd7c1550db55f24)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With recent patches added some of uclibc specific patches need
to be refreshed.
(From OE-Core rev: f3fa7577e8153b537948cf48711ffe03dbab6b3b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add more comments to the systemd configuration file for busybox's
syslogd utility. The purpose is to easy the life of system administrators.
These comments are mostly derived from the comments in syslogd.c in
busybox.
[YOCTO #5722]
(From OE-Core rev: eba4f2bd2a0becc086f107dbd0d3ec5222c5eed2)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The virtclass overrides will go away at some point (apart from the multilib one).
Change them all to class-xxx instead since people enjoy copy and pasting them.
(From OE-Core rev: d1c073d2813bd913617990cd047507353ea0c09e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Whilst debugging other issues I noticed this was out of sync with the code
in systemd itself. This brings things back into sync and shouldn't hurt
anything.
(From OE-Core rev: b188bda18690dc1af1cb5d18bb0f3ad40c9a6cc6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many of the init scripts in here will do nasty things if systemd decides to run
them. Mask the obviously bad ones so that systemd won't attempt to invoke them
if initscripts is installed with systemd.
(From OE-Core rev: 844f897710dfee9c59599d09b5c8c906e0d70ac0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will enables us to use journald-gatewayd
(From OE-Core rev: 09706953cf0e1b97d5b8808bdca1e8c125b8a9f7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These set of patches fix journald exhibiting some issues
under load.
One of the prevelant issues is that when appending to journal
it is not able to allocate memory and starts taking 100% cpu
spewing errors like
systemd-journald[2934]: Failed to write entry (19 items, 452 bytes), ignoring: Cannot allocate memory
Other memory issues crept up with time e.g.vacuuming
(From OE-Core rev: b1bdc1c6fb6914d85f888acde9d806d5560c84d8)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The nfs init scripts have both systemd and sysvinit versions with
non-matching names so we need to mask out the duplicate scripts
else we see NFS errors on bootup.
(From OE-Core rev: 6fadb3f27c48bb92f9f9de5977707a6b244aac54)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a race condition in the makefile that can result in build failures like
this in parallel builds:
| ./gdbus-test-codegen-generated.h:7:0: error: unterminated #ifndef
| #ifndef __GDBUS_TEST_CODEGEN_GENERATED_H__
Fix the rules to stop this happening.
(From OE-Core rev: 97ccd2b841c9dc598dbe39162f335bcde48a7c26)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the systemd/sysvinit DISTRO_FEATURES are changed without wiping the package
feeds it's possible to build an image that pulls in mismatching versions of
systemd and udev. This leads to images that are broken and don't boot
correctly.
Prevent this by adding a version-locked dependency on udev in systemd so that
images that attempt to install mis-matching versions don't build.
(From OE-Core rev: cb64f979ac4d792027a4a85fe086d0854e7bc9bc)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the image is built with both systemd and sysvinit there'll be a dbus-1 init
script and a dbus service. This means systemd can try and launch both, which
won't work.
There's a systemctl mask to stop this in systemd-compat-units, but the logical
place for it to be is in the dbus recipe so it can't be left out of an image.
(From OE-Core rev: c910aa17689077362a25938aeebee7fb24057e30)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 5cab5935d6924e0aca5da4b682bb83e54f20bc1d added dependencies on
docbook-utils-native and linuxdoc-tools-native, even though the same
commit ostensibly disabled building of the documentation and there was
no explanation of why these dependencies might be necessary. It appears
that they don't serve any useful purpose so let's remove them again.
(From OE-Core rev: 435f0c2c86cec4bc40731eaddec6c59260dd1ef5)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libcgroup requires native packages for bison and flex to configure
itself successfully. Added those in its DEPENDS.
(From OE-Core rev: b50bdeaea15fcd24fd2c03fd02d4a1a365948cef)
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport a patch from upstream to fix skipped tests, essential for gdk-pixbuf to
pass without enabling all loaders.
(From OE-Core rev: 4bf996557409b63c2d783f175c6325c966aae236)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current change contains two different logics resulting that users like me
may need to partially override the behavior of it. It would be easier for end
users to keep one change while dropping the other if needed, like in our case.
(From OE-Core rev: 0ca984f32682151cfeff852167f0174aca20a8bc)
Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding ability to use postinstalls intercepts in the nativesdk env, and
making sure the correlate between repo + SDK.
This to enable rootfs generation from a package repository using only a
package repository and the toolchain tarball.
See https://github.com/nysan/rootfs-sandbox for examples.
(From OE-Core rev: a54bab492903322e2a2495ea9576ee6b3272700a)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To correctly integrate with busybox in our system, we should add
'stat' to base_bindir_progs so that the 'stat' commands from busybox
and coreutils both register to /bin/stat.
Previously there was a patch in busybox to move 'stat' to /usr/bin.
But as we can easily solve this integration problem by modifying the
coreutils recipe, this patch has been removed. After all, maintaining
a patch that's not accepted by upsteam should not be our No.1 choice.
(From OE-Core rev: d98d6122bdfd84faaa37912ca66dabebc7eb9da6)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade busybox to the stable release 1.22.1.
During this upgrade, 9 patches are removed. Reasons are detailed below.
The following 6 patches are removed as they have been merged.
meta/recipes-core/busybox/busybox/busybox-lineedit-initialize-delptr.patch
meta/recipes-core/busybox/busybox/busybox-list-suid-and-non-suid-app-configs.patch
meta/recipes-core/busybox/busybox/busybox-sed-fix-sed-clusternewline-testcase.patch
meta/recipes-core/busybox/busybox/busybox-sulogin-empty-root-password.patch
meta/recipes-core/busybox/busybox/find-get-rid-of-nested-functions.patch
meta/recipes-core/busybox/busybox/testsuite-du-du-k-works-fix-false-positive.patch
The following three patches are removed because they are mainly about moving
binaries from /bin to /usr/bin to make the update-alternative work correctly
at rootfs time. We can easily solve this problem by changing recipes. There's
no compelling reason why such patches are needed.
meta/recipes-core/busybox/busybox/run-parts.in.usr-bin.patch
meta/recipes-core/busybox/busybox/stat-usr-bin.patch
meta/recipes-core/busybox/busybox/watch.in.usr-bin.patch
(From OE-Core rev: fa282186d82e8fe3c590d4ea79e464116e5ceea2)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As sysvinit doesn't inherit update-rc.d, we need to add this dependency
manually.
(From OE-Core rev: 4ea9ca2bbacb20c3ed454b80e2c020c1073f3299)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of manually adding initscripts to RDEPENDS of each package,
we should make it automatically handled by the update-rc.d.bbclass.
This solution would have the benefit of backward compatibility. In
other words, users need not modify their recipes.
This reverts commit 16080a3485.
(From OE-Core rev: f9f193219bd510160b6b09bae652a9dc8ea01e7b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the typo in the RDEPENDS statement to make it have real effect.
(From OE-Core rev: aa1224e4d83a4273848ba7601162157f5e415e30)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some postinstall scripts use the qemuwrapper script, so to be able to
offline install these packages outside of the bitbake environment, this script
needs to be exposed also in the SDK.
This to enable rootfs generation from a package repository using only a
package repository and the toolchain tarball.
See https://github.com/nysan/rootfs-sandbox for examples.
(From OE-Core rev: cc583b20a8d924f2c0c9754b71740449762d7391)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Other recipes dependencies and even some comments need to be updated
for the removal of unfs-server and the replacement with unfs3. The
unfs3 is a complete drop in replacement providing all the prior
functionality of NFSv2 but also adding NFSv3.
[YOCTO #5639]
(From OE-Core rev: d577c56519a448b142da5b43e46d5bd9d3a3b4bd)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove this service as it's moved to the run-postinsts recipe.
[YOCTO #5719]
(From OE-Core rev: 1e3ac15fcf502396f92c69788642a56064e22e35)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
define failure/success/warning/pass functions, some packages' initscript
need them, and /etc/core-lsb/lsb_log_message from lsb needs them too.
(From OE-Core rev: b78154c4a52b5a198e90bca8f83990fe9251fb72)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch mainly comes from meta-systemd with a few modifications.
The purpose is to get rid of the LSB init scripts in systemd images.
[YOCTO #4420]
(From OE-Core rev: 5d90c5ebdb899b2951c97a94ff57867c1e491c15)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch mainly involves four changes.
1. Ship the sys.tar.xz and extract it on target to avoid ELOOP error.
2. Make systemd-ptest rdepend on bash and perl as the test cases need them.
3. Fix paths in Makefile so that the test cases could run on target.
4. Install ${libdir}/udev/rules.d directory to make udev-test.pl work.
[YOCTO #5664]
[YOCTO #5673]
[YOCTO #5674]
(From OE-Core rev: 03ed9095b1ca54a060407f355be0ad9ec86b7610)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I created this after a git grep to look for files impacted by the x86
tune changes. I need a careful review here to determine if this is in
fact the right thing to do.
(From OE-Core rev: 0f3f8d6cad190cb8de9dba56c5933abdf4d99d07)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the tests are enabled then configure will check for the presence DBus. It's
generally present through the runtime dependencies so this often succeeds but as
it isn't a build dependency it's possible for DBus to be present at configure
time but removed at compile time, resulting in build failures.
(From OE-Core rev: 0150e86a7609579cf26f5ef5c6c69b521340218e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mappedfile ptest was attempting to write into directories that may not exist
on a non-Sato image. Instead, write into TMPDIR.
(From OE-Core rev: 93b4ecc263947826421d5b4fb1f99fe506b24287)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test was attempting to connect to a session bus and hanging if it couldn't.
Take a patch from upstream to correctly use a private bus.
[ YOCTO #5696 ]
(From OE-Core rev: 12e30b653899567312a7ec29b6e972c85ba8e25e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding "doc-pkgs" to IMAGE_FEATURES (in an image recipe) reports a conflict with reset.1 file, present both in util-linux and ncurses-doc packages.
<log>
| Collected errors:
| * check_data_file_clashes: Package util-linux-doc wants to install file /home/matt/tmp/oe-p/build/tmp-eglibc/work/qemux86_64-tiny-linux/test-image/1.0-r3/rootfs/usr/share/man/man1/reset.1
| But that file is already provided by package * ncurses-doc
| * opkg_install_cmd: Cannot install package util-linux-doc.
| WARNING: /home/matt/tmp/oe-p/build/tmp-eglibc/work/qemux86_64-tiny-linux/test-image/1.0-r3/temp/run.do_rootfs.13877:1 exit 255 from
| opkg-cl -f $INSTALL_CONF_IPK -o $INSTALL_ROOTFS_IPK --force_postinstall --prefer-arch-to-version install `cat $1`
| ERROR: Function failed: do_rootfs (log file is located at /home/matt/tmp/oe-p/build/tmp-eglibc/work/qemux86_64-tiny-linux/test-image/1.0-r3/temp/log.do_rootfs.13877)
</log>
Same issue already occured few months ago:
Re: [OE-core] Clashing man pages
https://www.mail-archive.com/openembedded-core@lists.openembedded.org/msg38590.html
(From OE-Core rev: 67499dbffd0f7241fd199b7fb94edfe2cebe8a9b)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
init-live.sh: $CMDLINE variable should be provided to switch_root
to let user specify runlevel on grub command line.
Feeding with -c /dev/console as well as busybox switch_root enables that option.
(From OE-Core rev: 5a2f4feeaac4f9278fa0cf808c2f495f0c19324f)
Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, tow successive toolchain builds for different hosts, will
issue a warning:
WARNING: The recipe nativesdk-packagegroup-sdk-host is trying to install
files into a shared area when those files already exist. Those files and
their manifest location are:
/ssd/work/yp1/build/tmp/deploy/ipk/all/nativesdk-packagegroup-sdk-host_1.0-r11_all.ipk
Matched in manifest-x86_64-nativesdk-packagegroup-sdk-host.package_write_ipk
Please verify which package should provide the above files.
That's because packagegroup is manually inherited after nativesdk which
is usually a BBCLASSEXTEND operation, done last.
[YOCTO #5396]
(From OE-Core rev: 7621a40d24f3e53b373f233e070894e4afc2b4b2)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the GLib tests that we run under ptest are missing runtime dependencies.
iochannel-test needs the EUC-JP encoding.
convert needs the ISO-8859-1 and ISO-8859-15 encodings.
contenttype needs shared-mime-info.
Add these to the RDEPENDS so that these tests pass.
[ YOCTO #5696 ]
(From OE-Core rev: 7b6316093ab28782edd45084d43dbd5c309be7c8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dnsmasq recipe in meta-networking ships a dnsmasq.service file, that will
correctly override the SysV init script. Thus, as pointed out by Ross Burton,
we should remove dnsmasq from the list.
(From OE-Core rev: 69a8153c55bf74fa6178d6bd65ac8e761c041a0e)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly disable systemd support so that it isn't a floating dependency and
libsystemd-login doesn't become a runtime dependency on non-systemd images.
Also don't bother setting the systemd unit directory as we're not installing
anything.
(From OE-Core rev: 4f5d00b551e2ee6056ebfc8365a05a5ca8e5d651)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch application failed on the autobuilder for pam, this refresh of the
patch should resolve the build failure.
(From OE-Core rev: c4c5ec52effc2ff97ac17270c1aa7884c808f5a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Respect the OpenGL distro feature and if it's enabled, pull in piglit and
mesa-tools.
(From OE-Core rev: cd61c62ed30694eeb82e88e058a3a3e1bfb06f78)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The cross-canadian packages were split into their own package group
some time ago. These two are leftovers and can be safely removed.
(From OE-Core rev: 0f05393bad8ac84627f339aa1619c96c22d2dc37)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dependency here needs to apply for nativesdk as well as target packages
as the autobuilder just tripped over that. We'd never want a native version
so I'm not sure why the target class override was even present. The dependency
also applies to do_package so lets be explicit about that in case sstate
decides to get clever.
(From OE-Core rev: b7ec21ac8ebac9d7fba34d6f11d93ecb8f561ca8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LIC_FILES_CHKSUM has changed with the introduction of a BSD-3-Clause
algorithm (curve25519-donna); this has prompted a re-evaluation of the
LICENSE value which should now reflect the licenses declared in the
upstream documentation. Thanks to Beth Flanagan for helping with this.
(From OE-Core rev: 232e8b96988ffa6e5107917fbf41222d26e4e90b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do also check systemd_unitdir/system/ for available unit files.
This was hiding dnsmasq.service for us, as /etc/systemd/system has
priority over systemd_unitdir/system...
(From OE-Core rev: 5aea3d375b717d96f8f916f2f830e8f8649a4991)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In vi mode, the 'p' and 'P' commands caused a segfault when nothing had
been put in the buffer yet because the delptr was not initialized.
(From OE-Core rev: 21ba0297409bfc6e0fb89f45c9bfed8981c7df5b)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have enabled SEAMLESS_GZ and SEAMLESS_BZ2 in defconfig, it's
reasonable for us to enable SEAMLESS_XZ as well. Otherwise, we
couldn't extract tar.xz file while we could extract tar.gz file.
Such situation would be somewhat confusing.
(From OE-Core rev: 6482a43211a3a4858030ae3c59f5726c0ccba261)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the initscripts-functions has been packaged separately,
packages which may use the functions script should have a runtime
dependency on it.
(From OE-Core rev: 6690c12cb1977f6bf93f3eb6d471dbd7db81bf28)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many SysV init scripts need the /etc/init.d/functions script. But
this script is part of the initscripts package. As a result, the
initscripts package should always be installed into the system to
avoid errors when starting daemons. However, it makes no sense to
install the initscripts package into a systemd based image, because
what the init scripts provide has already been provided by the systemd.
On the other hand, the functions script might be still needed in a
systemd based image because other init scripts such as distcc might need
it.
The above situation leads to a natural separation of the functions script
from the initscripts package. And this patch does so. It separates the
functions script into initscripts-functions packages.
(From OE-Core rev: 736dd8380f41d6ff1d3d0e4fe33cc01e2e873ef6)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All dev related items should be packaged in the core PN package not in seperate packages.
(From OE-Core rev: 4bac11ffe389f10ca53b339a31eac167224dbc06)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade coreutils to 8.22.
Changes since 8.21:
1) Remove the acl patch as it's not needed now.
2) Add a new patch to fix the following compile error.
"dummy-man: too many non-option arguments"
(From OE-Core rev: 144a48e34d17fd8736a482bae4ee69efc37b8a1f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were disabling API entry point sanity checking which should only be done if
the performance gain is prefereable to correctness. Instead don't disable
checks explicitly as the default is enabled, allowing distributions to append
--disable-checks if required.
(From OE-Core rev: 079975e456abe9e76bde3f2866ffe50f2610345f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of several variables and overrides, use PACKAGECONFIG to respect X11 and
systemd DISTRO_FEATURES.
(From OE-Core rev: 963da99c77ad28bd184a4de59af9cbcfaef62358)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The uclibc configuration requires the gnu libiconv, so tell configure which one to use
[YOCTO #5431] (one of many)
(From OE-Core rev: a90b32d63c8a816462b42a33851e4e5e6041bbca)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure both versions have the same values.
(From OE-Core rev: 164daf1398573bb503dbe301b4df5aabbc7cafc2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These recipes all had a long DESCRIPTION but no SUMMARY; since the
SUMMARY is often displayed alone by package managers and the default
value ("${PN} version ${PV}") isn't particularly useful, we should
always try to set SUMMARY.
(From OE-Core rev: db02edd2e9d7645592933cbb25ea0ca4d6561392)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
(From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting this value to blank or "n/a" in just a few recipes accomplishes
nothing.
(From OE-Core rev: 2d6f11d6bae8b03a00086f1dd43ca1853ac667d5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The upgrade changed the checksums for dbus but not dbus-ptest. This
patch corrects that.
(From OE-Core rev: 9e56856a15d80bf57b8a4fe54508141da46581f2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd will create the machine ID automatically if it isn't set, so this unit
doesn't serve any purpose.
(From OE-Core rev: 8e6da3d8973777d9b651d085e06ee20a761ed62c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
${localstatedir}/log/journal is created by tmpfiles.d on boot, and the README
just causes warnings that /var/volatile isn't empty when mounting on top of it.
(From OE-Core rev: dfcd8f2a6f5847d735755c1644c4c93be4fbb3e8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop PR and INC_PR.
Move patches into a non-versioned directory, and update dbus-ptest to match.
(From OE-Core rev: 0289a1c325eea881ce3d68def5262f9e763d4fd2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows us to compile busybox using clang. Nested functions is
a gcc extension not supported by clang.
(From OE-Core rev: d2bf599f36ed1a04c661fc0a71e664e219532cbc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On mpc8315e, a system freeze is encountered at system boot time if
connman and init-ifupdown are installed.
The error message before the freeze is:
"ip: RTNETLINK answers: File exists"
This problem is introduced by the following commit.
dc80eea sysvinit: fix problem in switching runlevels
Part of the above commit is to make the networking init script run
at runlevel 2 3 4 5 instead of runlevel S. However, after the change,
networking is run after connman. And this causes the problem stated
above.
Make networking run first when entering runlevel 2 3 4 5, so that we
don't break things.
[YOCTO #5651]
(From OE-Core rev: d518892d38ac399c091ff509a9fd90fc00d71224)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install udev test suite and run it as a ptest.
(From OE-Core rev: 34430ecdc4bb7414ca865df1b164bce1e4fec6fa)
Signed-off-by: Alexandra Safta <alexandra.safta@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd has presets as described here
http://lists.freedesktop.org/archives/systemd-devel/2011-July/002830.html
This patch will let distros define presets file
which will override the enable/disable specified
by recipes.
systemctl preset without any argument will run presents
on all services
systemctl preset service1 service2 will run presets on
specified pervice.
something like enable * or disable *
would mean that all services will be either enabled or
disabled by default.
If no user-presets are specified then 'enable' is default
systemd allows basic globs but we do not implement them
except '*'
(From OE-Core rev: 1254416901a0c70814296a86784f4934f27c7d4a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per discussion on the mailing list [1], remove this largely
unmaintained external toolchain support in favour of the maintained
version in meta-sourcery [2].
Also correct the example and documentation.conf entries for TCMODE to
match up with this change.
[1] http://lists.openembedded.org/pipermail/openembedded-core/2013-December/087133.html
[2] https://github.com/MentorEmbedded/meta-sourcery/
(From OE-Core rev: 7603b15415301679bccbcb89af688c211704a43a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow offline creation of a rootfs, using only
the RPM package repository and a toolchain tarball.
Ref: https://github.com/nysan/rootfs-sandbox
(From OE-Core rev: 80a8ecf91181f2fbec1a45231615b12949327970)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GMAE (GNOME Mobile And Embedded) doesn't really exist anymore and these packages
were a subset of it anyway. Remove as they don't give the user anything useful
now that you can generate a SDK from an arbitrary image.
(From OE-Core rev: c44fa1206c965054e8e4d316969a8e291cfef590)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When processing startup scripts which use update-alternatives, we need to keep
resolving the symlink recursively until we hit a real file, due to the
alternatives indirection. This fixes the ability to run certain postinsts at
do_rootfs time, which is needed for good read-only-rootfs support.
(From OE-Core rev: 987a203f85e9474fd1807e577c7fd8c30ecf78d6)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The '-c DEV' option is specific to the switch_root provided by busybox.
switch_root from util-linux doesn't recognize this option. As a result,
if we we this init-live.sh script together with util-linux, we would get
a kernel panic when executing switch_root.
Besides, this option doesn't seem to have any useful effect as far as I
can see. Removing it doesn't affect the behaviours of our live images.
(From OE-Core rev: 6f50ccb8ae9e11870f99bb3b191f677c3633cd0d)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the contains function results in more optimal sstate checksums
resulting in better cache reuse as we as more consistent code.
(From OE-Core rev: 9c93526756e7cbbff027c88eb972f877bcb1f057)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having eglibc rebuild every time DISTRO_FEATURES changes is suboptimal.
This rewrite takes advantage of bitbake's understanding of the contains
function so this doesn't happen. The code is marginally uglier but is
worth the benefit in fewer libc rebuilds.
(From OE-Core rev: 9a272ee6d72fc727a2dfe660ceded560a9f1ae88)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is little point in including the file twice so lets not. The
main recipe already included it.
(From OE-Core rev: b3cccee0c66ce744a79843a5dd9798475c84e23c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add busybox_git.bb recipe so that it would be easier to hack with
busybox. Set DEFAULT_PREFERENCE to "-1" in the git recipe so that we
still use the busybox_1.21.1.bb recipe by default.
(From OE-Core rev: d290bbe6d9826fbcfa2e0a7624886284697ed7eb)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install zlib tests and run them as ptest
(From OE-Core rev: 2988cef2f0ad857b5bbf6a0189ffb0fb88795f8c)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is used for fixing coreutils 6.9 (GPLv2+) do_installed failed:
[snip]
| coreutils.texi:2499: @itemx must follow @item
| coreutils.texi:2636: @itemx must follow @item
| coreutils.texi:2644: @itemx must follow @item
| coreutils.texi:2654: @itemx must follow @item
| coreutils.texi:2677: @itemx must follow @item
| coreutils.texi:2689: @itemx must follow @item
| coreutils.texi:2820: @itemx must follow @item
| coreutils.texi:3058: @itemx must follow @item
| coreutils.texi:3253: @itemx must follow @item
[snip]
Use '@item' instead of '@itemx' in several places, as Texinfo 5 refuses
to process an '@itemx' that is not preceded by an '@item'. Ensure that
node extended names in menus and sectioning are consistent, and that
ordering and presence of nodes in menus and in the actual text are
consistent as well.
[YOCTO #5593]
(From OE-Core rev: 04fab782f42b8f5047390042618f9c841b8c3a96)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This doesn't exist when using systemd as it's part of the sysvinit package, and
this script doesn't need it.
(From OE-Core rev: 426a22bb67c7823ee733f8c2bd85421b785c3631)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
readprofile was missing from the alternative configuration, which was
causing readprofile to be packaged into the base util-linux.
(From OE-Core rev: cac08f23aaed87148d1825cca3c7586ab891ef04)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the test "Test against HP-UX 11.11 bug: No converter from
EUC-JP to UTF-8 is provided" since we don't support HP-UX and it
causes guile-native compile failure if the euc-jp is not installed
on the host.
(From OE-Core rev: ac902d0fdf44beda2d0954cc477a4e2b177a2f2a)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the systemd DISTRO_FEATURE is enabled, then recommend systemd-analyze for
profiling boot performance.
(From OE-Core rev: 20d2fad0d08eb337fdc80385bce32469a97e988a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Busybox also provides sulogin command, so we need to use the ALTERNATIVE
mechanism to manage it.
(From OE-Core rev: 8b3a799a87d18b1d113d59b3e7a681db5683e5f8)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 91c0f9e3 moves library files to base_libdir for safe while
symbol link libblkid.so, libmount.so and libuuid.so are placed in
libdir, not base_libdir.
Meanwhile, libblkid.la, libmount.la and libuuid.la are placed in
libdir too.
Thus they are missed by related develop package and
collected by util-linux's develop package at last. Fix it.
(From OE-Core rev: 4571c9e963c667bce8b61e88816b34ba74b2aab7)
Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com>
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In commit faa8cc6c2a582a32c695f3f2b0d45b6892c769fd dmesg.sh was
added to the set of init.d scripts. But the script was never put
in any run-level. This patch will add dmesg.sh to run-level S.
(From OE-Core rev: 7d2767d4e27c6d0eaa56f3e126df56e65a5364c9)
Signed-off-by: Hans Beckerus <hans.beckerus AT gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed early FILES_${PN} += for the pam config
files which would subesequently be overwritten by
a FILES_${PN} = .
(From OE-Core rev: e4cead9e97aecdc3d45910aca71eb1d9e9e9a2b6)
Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongxu Jia
Robert P. J. Day
Brian Lloyd
Drew Moseley
Robert Yang
Richard Purdie
Ross Burton
Corneliu Stoicescu
Chen Qi
Denys Dmytriyenko
Matthieu Crapet
Kai Kang
Chong Lu
Cristian Iorga
Enrico Scholz
Shan Hai
Saul Wold
Roy Li
Paul Eggleton
Khem Raj
Petter Mabäcker
Changhyeok Bae
Maxin B. John
Ming Liu
Joel Fernandes
Max Eliaser
Chunrong Guo
Otavio Salvador
Mike Looijmans
Jacob Kroon
Wenlin Kang
Chunrong Guo
Jonathan Liu
Mats Kärrman
Stefan Stanacar
Trevor Woerner
Christopher Larson
Tom Zanussi
Martin Jansa
Laurentiu Palcu
Randy MacLeod
Phil Blundell
Noor
Laszlo Papp
David Nyström
Jason Wessel
Darren Hart
Krzysztof Sywula
Anders Darander
Upgrade Helper
Muhammad Tauqir Ahmad
Alexandra Safta
Christopher Larson
Tudor Florea
Mark Hatle
Jackie Huang
Qiang Chen
Hans Beckerus
Florin Sarbu