Without this, python-nativesdk-crypt can depend on openssl which is incorrect.
(From OE-Core rev: 5740696c81a9143504c1cb93e94c54add27896e4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a bug showing up where the crosssdk recipes were being installed as machine
specific in the sstate-control directory. This turned out to be due to the architecture
fields used by sstate being set incorrectly. The problem is that the crosssdk inherits
the cross class. It therefore needs to be listed in this if statement block before
the cross check, not after.
This should resolve some package architecture issue of crosssdk sstate files.
(From OE-Core rev: 79fe28e6033273f9632ca7549d1599d3fd1463ef)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set SERIAL_CONSOLES if you want to define multiple serial consoles, also if
you need to check for the presence of the serial consoles you can also define
SERIAL_CONSOLES_CHECK to determine if these are present when you boot. This
will prevent error message that pop up when the serial port is not present.
SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS1 115200;ttyEHV0"
SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
The above lines in machine.conf or elsewhere will have the effect of having
two serial consoles and removing any that are not present at boot
(From OE-Core rev: eecd65f188ba2c924626b7e1bf5c8e2eb51e9b59)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When gl is disabled in PACKAGECONFIG then we dont need
to check for supporting libs to be present before running
qemu.
(From OE-Core rev: 6612873dc59054e6d37fa7488226218bfb759127)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having XZ_COMPRESSION_LEVEL on -e -9 and -T 0 will make xz eat more
than 6Gb memory. Reduce this to -6 to make xz to use about 471Mb
on the tested machine.
(From OE-Core rev: cfd201ecda95d00bc5d70aa5045c649b98ffe8b8)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Default this variable to 0. This will make xz use as many threads as there are CPU
cores on the system.
(From OE-Core rev: 81c8e8a81e90ce95042e9fff8bac6fa011c416d1)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having -c modifier makes xz to output the compressed data to stdout. In this
way the needed data will be in the do_rootfs log.
Redirect data to ${IMAGE_NAME}.rootfs.${type}.xz .
(From OE-Core rev: 7ceea61636d6a6f886002e3c29941da3356157ac)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should not just replace CCFLAGS with CFLAGS while compiling, because
this may cause run-time errors with perl's DynaLoader.pm.
Tested on qemux86 with new libnet-libidn-perl bb recipe:
root@qemux86:~# perl -e "use Net::LibIDN"
Not a CODE reference at /usr/lib/perl/5.14.2//DynaLoader.pm line 213.
END failed--call queue aborted at /usr/lib/perl/vendor_perl/5.14.2//Net/LibIDN.pm line 213.
Compilation failed in require at -e line 1.
BEGIN failed--compilation aborted at -e line 1.
(From OE-Core rev: 855211ae7a224f96663862d4a0e58a90d945dd48)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recently the tarball has been changing due the fact it gets rebuilt
nightly and timestamps are getting updated and changed internal to
the tarball. Moving back to SVN to try and address this.
(From OE-Core rev: 8f30d41ede28a86564c402ce5b467e51aec6b15d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This contains bugfixes from the 5.0.3 and 5.0.4 releases
(From OE-Core rev: bbdbb70192e16fe351f9cf8f781110faf839be51)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out "apt-cache showpkg" does return some information when a
package does not exist but another package recommends it, which can
occur for empty *-dev packages; so use "apt-cache policy" with a
different line count instead.
(From OE-Core rev: ac62761a9cacdfd0225d2db5a75584e6c85469a8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the usual case, the computed path used for debugedit to fix
up path references for the target filesystem is correct. However,
prebuilt binary components, such as prebuilt toolchains, can
have debug paths that do not reflect paths within the local
build directory. Providing an override lets us continue to use
the standard debugedit logic in package.bbclass.
(From OE-Core rev: 32b1fde106bf423873a4a56e1111f230494e2d4a)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix [YOCTO 2726]
C language has 3 distinct char types:
char
unsigned char
signed char
A char has the same range of values as signed char on X86,
but same as unsigned char on ARM which made Slang's typecast()
and array_sort() unable to work for char value on ARM, since
Slang is assuming "char" as "signed char".
Now we change "char" as "signed char" explicitly in
util/mkslarith2.sl, and use it to regenerate src/slarith2.inc
(From OE-Core rev: 0a1d842e2db63265a6a6708b1101e1f52f223fc9)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are only a couple of helper utilities within gconf that need gtk+ as a
dependency and those are unused and pretty useless. We might as well drop
the dependency on gtk and allow more parallel builds by reducing dependency
bottlenecks.
(From OE-Core rev: 6facee8443966b646cd1e72f14ae13e58a13f621)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
| dbconvert.o: In function `rpmdb_convert':
| /local/jenkins/jobs/yocto-upstream/workspace/label/master/machine/p4080ds/poky/master/tmp/work/x86_64-linux/rpm-native-5.4.9-r45/rpm-5.4.9/tools/dbconvert.c:126: warning: the use of `tempnam' is dangerous, better use `mkstemp'
| dbconvert.o: In function `main':
| dbconvert.c:(.text+0x923): undefined reference to `htobe32'
| dbconvert.c:(.text+0xaa4): undefined reference to `htole32'
| dbconvert.c:(.text+0xac9): undefined reference to `htole32'
(From OE-Core rev: add2c772cd404e8bea4828959fcb5ee33c35c048)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Address QA issue: Files/directories were installed but not shipped.
New revision contains patch to mkelfimage removing
/usr/share/mkelfImage/elf32-i386 directory from Makefile install target.
http://review.coreboot.org/#/c/1195/
(From OE-Core rev: 7dd161816ccbb03db4f86902f96d3e86e09ccb64)
Signed-off-by: Raymond Danks <ray.danks@se-eng.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Package install failures due to issues in post install rules.
package_do_shlibs only looks for libraries in a directory "lib", this should be
modified to the variable baselib.
ldconfig_postinst_fragment failure observed on systems without /sbin/ldconfig
[ -x /sbin/ldconfig ] && /sbin/ldconfig
results in the post install rule returning a failure. Modify to
if [ -x /sbin/ldconfig ]; then /sbin/ldconfig; fi
(From OE-Core rev: 3f85ab6d0d05a4e34fe73fa343d2b3b942fc69b7)
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mpc8315e-rdb was updated to the 3.4 kernel, but the SRCREV wasn't
updated along with it; this updates it.
(From meta-yocto rev: 422619e0aa68b24ca04c652a7369eebb1b0f597e)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the yocto reference boards to have the perf scripting fixes
from 3.2/3.4:
cef17a1 perf: add sgidefs.h to for mips builds
3258da3 perf: change --root to --prefix for python install
1f9c25b perf: add 'libperl not found' warning
f2b1bf1 perf: use pkg-config instead of python-config
568e05f perf tools: Add support to install perf python extension
7e47f81 Revert "perf: hard-code NO_LIBPERL/NO_LIBPYTHON"
(From meta-yocto rev: 46cc23ac62bfd4528aecc2f049326d0137e713b9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the yocto reference boards to have the perf scripting fixes
from 3.2/3.4:
cef17a1 perf: add sgidefs.h to for mips builds
3258da3 perf: change --root to --prefix for python install
1f9c25b perf: add 'libperl not found' warning
f2b1bf1 perf: use pkg-config instead of python-config
568e05f perf tools: Add support to install perf python extension
7e47f81 Revert "perf: hard-code NO_LIBPERL/NO_LIBPYTHON"
(From meta-yocto rev: a3dedc83578b1b9d6010bc1c78e69cdfe387b902)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the yocto hardware reference platform to use the
3.4 kernel by default.
This platform is supported in mainline, so no patch carry
forward or similar is required. Tested via NFS booting the
kernel on real hardware with 3.4.1 and things just work as-is.
(From meta-yocto rev: fbe1be490172993140db31472d14652d8ed45624)
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.0 SRCREVs to pickup the recent perf scripting fixes.
cef17a1 perf: add sgidefs.h to for mips builds
3258da3 perf: change --root to --prefix for python install
1f9c25b perf: add 'libperl not found' warning
f2b1bf1 perf: use pkg-config instead of python-config
568e05f perf tools: Add support to install perf python extension
7e47f81 Revert "perf: hard-code NO_LIBPERL/NO_LIBPYTHON"
(From OE-Core rev: 20405bdab18b7a2b101f818e72863d289d5945e4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As well, if "proto" is used, get the associated value as "protocol"
(Bitbake rev: 53e6b630f0463d2d07cdaa9c9eb36794dc9b6b69)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if there are multiple preferred providers available for
a runtime dependency, bitbake will print an Error message and let
the build go on. Anyways the build should abort while any Errors
occured.
[YOCTO #2734]
(Bitbake rev: 5f81a714f4fca785780bef555b419f0250e5ec1c)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the issue where gcc invokes the linker with an incorrect -L
library location and gives up because it can't find libraries. It was
looking in a /lib folder instead of /lib64
(From OE-Core rev: 1b428f0151a5b86332b501871bf4a925b43580a5)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On 64bit systems dtc will still install libaries in /usr/lib
unless we havet this override
(From OE-Core rev: b60579e66601ba60669a9e1194409fcd8b80530e)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When run valgrind, following error appears:
==2254== FATAL: can't open suppressions file "/usr/lib/valgrind/default.supp"
(From OE-Core rev: 0b3261d513cdad80174a9b9e804981c50bcb7ca2)
Signed-off-by: Zhenhua Luo <b19537@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When HOST machine installed imlib2, compiling directfb in OE will
direct this library, and try to use it. This is wrong, since there is
no imlib in OE, so we should disable it explicitly here.
Error as following:
| idirectfbimageprovider_imlib2.c:64:20: fatal error: Imlib2.h: No such
file or directory
Config.log as following (which is wrong):
configure:19602: checking for imlib2-config
configure:19620: found /usr/bin/imlib2-config
configure:19633: result: /usr/bin/imlib2-config
(From OE-Core rev: fbdee213465f38791f3dd6c2663f2fe295be3596)
Signed-off-by: Dennis Lan <dennis.yxun@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
install-neon-lib needs libsvn_delta-1.la which will be regenerated
during libsvn_delta-1.la's installation, if libsvn_delta-1.la is
in regenerating and at the same time install-neon-lib links it, the
error willl happen.
The error message is:
/bin/ld: cannot find -lsvn_delta-1
collect2: error: ld returned 1 exit status
This is a parallel issue, so it doesn't happen often.
Note:
The autoreconf doesn't generate build-outputs.mk, it would be generated
by autogen.sh (use build.conf as the input), but autogen.sh isn't
suitable for cross compiling, so both modified build-outputs.mk and
build.conf.
[YOCTO #2727]
(From OE-Core rev: ce37c45abb4cf43e5009867f695982de2eb33450)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gnupg has it's own fake curl, since we use gnupg with zypper, there does not
seem to be a strong reason to add curl to the depends list.
(From OE-Core rev: 44ea2cf548ca20488449d347f8f3b7d49f7e7493)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new feature named 'perf-tui'. Adding this into the
PERF_FEATURES variable in perf.inc will enable the perf TUI (Text-base
UI) user interface on a target, which adds libnewt and turns on the
perf text UI options in perf, if perf is included in an image.
If 'perf-tui' isn't named as a feature (the default), the perf TUI
will be disabled and unavailable.
(From OE-Core rev: 4fd8a550886f02189e4ed127d0a2f16e92f8474c)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new feature named 'perf-scripting'. Adding this into the
PERF_FEATURES variable in perf.inc will enable perf scripting on a
target, which will turn on all the language bindings currently
available in perf (Perl and Python), if perf is included in an image.
If 'perf-scripting' isn't named as a feature (the default), all perf
language bindings will be disabled and unavailable.
(From OE-Core rev: fc0661041436013b9099dbd659994a2b8b292c19)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a perf.inc to contain utility functions and definitions and to
avoid cluttering up the main recipe.
(From OE-Core rev: 414d00be5b350ea84fc7e1ff690f78b3396cfcd0)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.4 SRCREVs to pickup the following changes:
6297e4c perf: add sgidefs.h to for mips builds
69b7817 yaffs: add leading underscore to mtd_info function names
160f1ac yaffs: change type for mode to umode_t
2d875e8 Unionfs: use mode_t
(From OE-Core rev: 9d75c34948f5d961cff9d72fbaa628ff58821cc7)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating SRCREVs for the following fix:
Author: Tom Zanussi <tom.zanussi@intel.com>
Date: Tue Jul 10 09:38:40 2012 -0500
perf: add sgidefs.h to for mips builds
Allow Python.h to find the definitions it needs on mips i.e. get rid
of the error: "_ABIN32" is not defined.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
(From OE-Core rev: 04396899dc7973261404d5fbec3f85aa03a32e03)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Bogdan Marinescu
Matthew McClintock
Khem Raj
Andrei Gherzan
Xin Ouyang
Saul Wold
Koen Kooi
Zhenhua Luo
Paul Eggleton
Peter Seebach
Dennis Lan
Roy.Li
Raymond Danks
Amy Fong
Martin Jansa
Tom Zanussi
Bruce Ashfield
Paul Gortmaker
Wenzong Fan
Ross Burton
Robert Yang