util-linux's configure checks for pam_misc.h and if it finds it will
enable runuser, there was a case where it was found via shared state
and then got rebuilt. This makes the build more deterministic.
(From OE-Core rev: df801d65e5b55542d6bd94a179becd79d010b32a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This feature has been removed from eglibc 2.18
(From OE-Core rev: cce89a2f88fb159a82149a594349f6fd5fed6b44)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not mount /dev/dm-* by default via udev, this is the default
behavior for most distos and WRLinux4.x.
This resolved a problem with the sanity test failing due to seeing
the error while attempting to mount new logical volumes without fs.
(From OE-Core rev: 9a6cf08afd81c95abf13e6cf5e43bb8cd777edd9)
Signed-off-by: Xin Ouyang <Xin.Ouyang@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We now can have a 'one-binary' version of busybox, or 'two-binary'
version of busybox, controlled by the 'BUSYBOX_SPLIT_SUID' variable.
This makes on-target upgrade a problem, as we have to support the
following four upgrading paths.
For convenience, in the following context, A is used to denote a
'two-binary' version of busybox while B is used to denote a 'one-binary'
version of busybox.
A --(upgrade)--> B
B --(upgrade)--> A
A --(upgrade)--> A
B --(upgrade)--> B
This patch makes effort to support the above four situations.
[YOCTO #4802]
(From OE-Core rev: 4e571e97750f3ac6a62cd0d2d10c08be98230630)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When do ipv6 ready test, some DAD (duplicate address detect) tests failed
since it expect IPV6 will be disabled, but not. even accept_dad has been
set to correct value 2. Further investigation shows the root cause is that
setting the kernel parameter happens after the NIC is upped.
Make kernel parameters be configured before the interfaces is upped, and
duplicate setting the kernel parameters does not have negative effect.
(From OE-Core rev: cabe22b9470e870e63b5ef1ec8349c67b0823abf)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will enable the udev cache for sysvinit systems, which does improve post-first
boots.
(From OE-Core rev: 087d8ccd6eaf2795253b5cbeac171ad82489535c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
git recipes are stable enough and contains the fixes needed
to run with modern systems e.g. systemd etc. Drop 0.9.33
We already use git as default.
(From OE-Core rev: 05ae8f181e4e1699cf8e5d8bc20b3cbd4b532edf)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use kernel cfg management infra to manage kconfig
fragments.
Add fragments for locale and obstrack and enable them
by default
Drop aplready applied patches
Drop DP = -1
(From OE-Core rev: 7bcf53ddb2e1a7171545f544ee2443b06d7c3359)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few directories under /media were created by default, /media/card,
/media/ram, /media/realroot, etc.
These directories actually have no real usage now, thus removing them.
The /media/ram entry in the fstab is also removed, as mounting a tmpfs
over /media/ram in our system brings no benefit.
Note that a duplicate '/mnt' entry in dirs755 are also removed.
[Yocto #4774]
(From OE-Core rev: 458e76e470966d759067b2f6e6f00fa75a2963f3)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In case of a read-only rootfs, we skip the process of generating
udev cache, as the data cannot be persisted between reboots.
However, it's possbile that the $DEVCACHE (default to /etc/dev.tar)
exists in a read-only rootfs, no matter how it's generated or installed.
In such situation, we try to use $DEVCACHE if possible.
Besides the basic changes in the logic of udev cache handling,
this patch also adds code to output more information if the udev
cache is not used and VERBOSE enabled.
This patch also changes the readfile function to readfiles function
so that it could handle more than one file at once.
(From OE-Core rev: 4ec1266e7e1aacdb9d3d0fc5cd6307b60df1731e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python-git is needed by buildhistory-diff, so add it to this
packagegroup allowing buildhistory-diff to be used within
build-appliance-image.
(From OE-Core rev: 1f2d0f898e11bbb935d885920a1518336e19c3e7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python-git is needed by buildhistory-diff and the OE layer index update
script, and on machines where buildtools-tarball is necessary given we
are providing python we must provide this module as well.
Fixes [YOCTO #4747].
(From OE-Core rev: d9bf76b4fafc0ddcb19bf393e5e22678e49367b3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch tries to make a union mount in live image. For example,
if aufs is enabled with the aufs-enable.scc configuration fragment,
the init-live.sh script will use aufs to make a union mount.
Although overlayfs is not supported by Yocto kernel yet, this patch
still takes it into consideration with the expect that the related
code should at least serve as a placeholder.
[YOCTO #1487]
[YOCTO #4761]
(From OE-Core rev: 3cd6fedd815688b2f3fd97a56feb5f8696ebeace)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The unionfs has been disabled for more than a year and it's not going
to be used any more.
This patch cleans up the unionfs related code.
[YOCTO #4761]
[YOCTO #1487]
(From OE-Core rev: ba5e437bc7335468a70ea293496f78e1a9d66287)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since systemd also used tmpfs we should make a similar patch for
the systemd-udev script
Fix for bug: https://bugzilla.yoctoproject.org/show_bug.cgi?id=4632
Since udev 172, the 'mknod' logic was removed from udev. Yocto Dylan
is now using udev 182. This means /dev is now required to be a
devtmpfs filesystem (maintained by the kernel). If the root
filesystem is a ramdisk, the kernel's auto-mount of /dev doesn't
activate since there is no rootfs to actually mount... The bug causes
an unusable system as /dev doesn't contain even basic nodes required
to even get a login prompt.
The Yocto udev/init script mounts tmpfs if it does not detect tmpfs
or devtmpfs mounted at /dev. This appears to be outdated logic that
is no longer correct. I believe the Yocto udev init script should be
checking and mounting only 'devtmpfs' on dev.
(From OE-Core rev: d3616f31617830cac9375e8f4aa33e344ac554ed)
Signed-off-by: Alex Olson <alex.olson+yocto@gmail.com>
[YOCTO #4632]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix for bug: https://bugzilla.yoctoproject.org/show_bug.cgi?id=4632
Since udev 172, the 'mknod' logic was removed from udev. Yocto Dylan
is now using udev 182. This means /dev is now required to be a
devtmpfs filesystem (maintained by the kernel). If the root
filesystem is a ramdisk, the kernel's auto-mount of /dev doesn't
activate since there is no rootfs to actually mount... The bug causes
an unusable system as /dev doesn't contain even basic nodes required
to even get a login prompt.
The Yocto udev/init script mounts tmpfs if it does not detect tmpfs
or devtmpfs mounted at /dev. This appears to be outdated logic that
is no longer correct. I believe the Yocto udev init script should be
checking and mounting only 'devtmpfs' on dev.
(From OE-Core rev: 31ab19ab69bc6504df01cac7ee0670ca78d247ab)
Signed-off-by: Alex Olson <alex.olson+yocto@gmail.com>
[YOCTO #4632]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install files from EXTRA_DIST needed for some tests.
Add configure parameter with-dbus-test-dir to specify where the test
tools are located.
(From OE-Core rev: 330d594af9f14faf0e5770b6056f4457a033fedd)
Signed-off-by: Adrian Dudau <adrian.dudau@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reboot system repeatedly, occasionally found usb automount failed, a
low probability but it happens.
$ df
Filesystem 1K-blocks Used Available Use% Mounted on
none 1024972 4 1024968 0% /dev
/dev/sda3 7689384 3540940 3757840 49% /media/sda3
/dev/sda2 146127424 1238432 137466120 1% /media/sda2
/dev/sda1 17845 14570 2354 86% /media/sda1
/dev/sdb 293400 288560 4840 98% /media/sdb
/dev/sdc4 457632 32 457600 0% /media/sdc4
/dev/sdc1 475018 2321 447749 1% /media/sdc1
/dev/sdd 1382298 1382298 0 100% /media/sdd
/dev/sdc2 475694 2320 448374 1% /media/sdc2
/dev/loop0 270649 181249 75644 71% /
df: /media/sdc3: No such file or directory
tmpfs 1029352 0 1029352 0% /dev/shm
tmpfs 1029352 2816 1026536 0% /run
tmpfs 1029352 0 1029352 0% /sys/fs/cgroup
tmpfs 1029352 4 1029348 0% /tmp
tmpfs 1029352 0 1029352 0% /media/ram
tmpfs 1029352 116 1029236 0% /var/volatile
When boot media has been found, udev will be killed. If udev is busy
to mount other medias at the killing time (especially medias is many),
the above issue will occur occasionally.
Invoke `udevadm settle' before killing udev will resolve this
issue, it watches the udev event queue, and exits if all current
events are handled.
Use variable `_UDEV_DAEMON' to replace hardcoded `udevd' to keep
consistent with previous.
[YOCTO #4745]
(From OE-Core rev: 2f209a7045a93e7e42f90418a42f464827b4a7f8)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lsbtest shows that /usr/lib/locale dir is lost, so create it
(From OE-Core rev: 6fb6934a590e5ecda864183c0be83e1b59fec8c7)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recently it was discovered that many Fedora hosts have a broken version of
make 3.82. Add make to the buildtools-tarball, as well ad modify make to
support building a special nativesdk version.
(From OE-Core rev: ea972fc4ce2268f01be6beeafd27dd949d800f9d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install busybox test suite and run it as ptest.
(From OE-Core rev: 0d29dc5b5f7742df60fdba90835ef77425963bde)
Signed-off-by: Anders Roxell <anders.roxell@enea.com>
Signed-off-by: Björn Stenberg <bjst@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous method of shrinking down the scale of the environment-setup
file would not work properly when the target is configured with multilibs.
In addition, the configured machine name and similar settings could leak
into the SDK naming. This was resolved by clearing the SDK generated
files and generating our own custom files.
Note, the name of the environment-setup now is suffixed with the SDK_SYS.
(From OE-Core rev: 778cd8d2110ef2db5ff4ae4f0b55c52a8f1ea334)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Alias and WantedBy directives can accept all valid unit types when
using the systemctl from systemd. And since the systemctl script should
match the behavior of systemd as much as possible, add the current set
of unit types listed at
http://www.freedesktop.org/software/systemd/man/systemd.unit.html
to the Alias and WantedBy directives.
The deficiency was exposed when trying to use:
Alias=default.target
in a foo.target. No symlink was created by running
"systemctl enable foo.target" during the package's postinst.
(From OE-Core rev: 374b9c37b3310cf2a3373633197ca7ba21f6d1bd)
Signed-off-by: Randy Witt <rewitt@declaratino.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previouly, the udev-cache has no real effect even if it's installed
into the system. The key problem here is that at first boot, the
/etc/dev.tar is not present, thus resulting /dev/shm/udev.cache not
created on first boot even if udev-cache is enabled.
This patch fixes this problem. The /dev/shm/udev.cache will be created
if necessary, that is, on first boot or when some part of the system is
changed. In the latter case, the udev cache may not be valid.
[YOCTO #4738]
(From OE-Core rev: 84e0ec2e677fb0236a38478372cdd75797cf5a2e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tinylogin has been deprecated and the functionality ported into busybox.
We now use busybox as the login manager, so the tinylogin recipe could
be deleted.
[YOCTO #4207]
(From OE-Core rev: 2762ff976a3473be4259889029e048ab8b3be5ab)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tinylogin has been deprecated and the functionality ported into busybox,
so we switch to using busybox as the default login manager.
[YOCTO #4207]
(From OE-Core rev: 54fc2a698d49f7acc93c8e4b6f6c4e7b3b6ffcc8)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch enables us to split the busybox into two binaries, one
containing suid applications, and the other containing nosuid apps.
Add a variable, BUSYBOX_SPLIT_SUID, to control whether to split the
busybox binary into two parts. We default it to "1" to enable the
splitting, but users could still override it to disable the splitting.
After all, busybox has no internal support for this suid apps splitting,
so there might be users out there who want just one busybox binary.
The basic idea here is to build the busybox twice, each with the correct
configuration items. We extract the non-app part of the original .config
file, and merge this part with the suid-app part to form a .config which
contains only suid apps. The same strategy applies to the non-suid apps.
[YOCTO #4207]
(From OE-Core rev: e5a1442819dfb74e86a6f69da008ba6908c8bbc7)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch, written by Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>,
adds the ability to busybox to list configuration items of suid apps
and non-suid apps separately.
`make busybox.cfg.suid' generates a file containing config items of the
suid apps.
'make busybox.cfg.nosuid' generates a file containing config items of
the non-suid apps.
This patch helps to separate busybox into two binaries, the suid one and
the non-suid one.
[YOCTO #4207]
(From OE-Core rev: 832d1b5575c76f61623f2e0337554287d056422b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a config fragment to enable the login/passwd utilities of busybox.
[YOCTO #4207]
(From OE-Core rev: 2a37490d4d55a1a6e4c4d268231a9d8904d38f8b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, if CONFIG_FEATURE_INDIVIDUAL was enabled for busybox,
yocto-based systems could start correctly.
This is because if busybox is built as individual apps, '/bin/busybox'
may not be present, so setting the default ALTERNATIVE_TARGET to
'/bin/busybox' is not appropriate and could lead to errors.
This patch fixes this problem by checking the existence of '/bin/busybox'
before setting the ALTERNATIVE_TARGET to '/bin/busybox'.
After this change, if busybox is built as individual apps, we'll have
links like '/bin/ls -> /bin/ls.busybox', otherwise, we'll have links
like '/bin/ls -> /bin/busybox'.
Note there's a grep expression change in this patch. The old expression
doesn't work well, it has an unwanted underscore, so I changed it to make
it work.
[YOCTO #4570]
(From OE-Core rev: 87efa83191f0b4f4cec3a821b6dfe425c781c077)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the pkg_postinst_${PN} from this recipe, as it's redundant.
It basically wants to do the same thing as the update-alternatives
does. But it doesn't do it well.
(From OE-Core rev: 5b961afc784747eb8240540e542a789849118596)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PRINC usage is removed from meta-intel, bump core PR values to ensure
no version regressions.
(From OE-Core rev: c6108ebe116eafaf0a22b5f22a3eec87c86859f4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
root@emenlow-noemgd:~# /etc/init.d/systemd-udevd restart
Stopping udevd
Starting udev
corrupt queue file
root@emenlow-noemgd:~# /etc/init.d/systemd-udevd status
udevd is stopped
root@emenlow-noemgd:~# ps
3805 root 8728 S /lib/systemd/systemd-udevd
The process name is systemd-udevd rather than udev which is
used in systemd-udevd's init script.
[YOCTO #4746]
(From OE-Core rev: 8f59aa06f3eb955d58600dfc628bd3b5d2aa0f9a)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a typo, the fix was merged upstream, this patch
updates to the new SRCREV.
(From OE-Core rev: ae089fddda333228d8589b7951fa96232accdb6a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've been seeing issues where some TERM values don't work well with the
tarball. These show up as escape codes coming from simple python calls such
as printing the python version. Adding the terminfo goes part way to addressing
the problem, the remainder is ensuring the relocation code correctly searches
the right path for it (which will be in a follow on patch).
(From OE-Core rev: 697e64c98affc4e0d8aa4828e74331c918b23a0e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch has been merged upstream now, so refresh the patch with a backport
(the patch was changed before being merged).
(From OE-Core rev: cdad18589d08fdf592a50685f3b5fed32f4f4c76)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed for the unittest part of bitbake-selftest can work correctly.
(From OE-Core rev: fe744381e8844ad17dcc6e036650a442dbc9575d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the same file is installed twice there's a race which can lead to "make
install" failing. Remove the redundant installation of quotaon.service to
eliminate the race.
(From OE-Core rev: c6c5c2285e1b6cb3598ccba08aee3dfd090e7129)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that liburcu supports mips, this packagegroup can pull in lttng recipes
(lttng-ust, lttng-tools, lttng-modules, babeltrace) on that architecture as it
does for the others.
(From OE-Core rev: c0f435cde195e1d037af32c69aa1732797362cfa)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ext2 group includes e2fsprogs, so this is consistent and should be
appropriate, I think.
(From OE-Core rev: 4ec66dc5f38913056942e1288c0b01a00ea0551f)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patching a generated file is prone to conflicts, and we'll be replacing this
file anyway when configuring, so drop the Makefile.in hunks.
(From OE-Core rev: a3fa323c4d24375be9b783281c3cf31c0707ecb7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the removal of PM's meta-data was moved in image.bbclass, after
rootfs_*_do_rootfs() runs, there's no need to remove the files in rootfs
postprocess stage. Also, if the meta-data is removed then there's no way
we can save the postinstalls to /etc/(deb|ipk)-postinsts later.
For RPM, it doesn't really matter since the postinstalls are saved to
/etc/rpm-postinsts as soon as the postinstall fails.
[YOCTO #4484]
(From OE-Core rev: aac8a59216819759d6b97bc30a7c717dbee7060a)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is necessary since libxml2 has python dependency.
This patch will fix this error:
...
/path/to/build/system/4.7.2/ld: cannot find -lpython2.7
...
ERROR: Task 4152 (virtual:nativesdk:meta/recipes-core/libxml/libxml2_2.9.0.bb, do_compile) failed with exit code '1'
(From OE-Core rev: 4f2b3e3831bdc5707eacdab571ab207d8b09953e)
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1, This issue happens to BSP only.
After a BSP board is booted with Yocto linux from USB drive, "cat /proc/mounts" shows:
...
/dev/sda3 /media/sda3 ext3 rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered 0 0
/dev/sda1 /media/sda1 ext3 rw,relatime,errors=continue,barrier=1,data=ordered 0 0
/dev/sda2 /media/sda2 ext3 rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered 0 0
...
but actually the directory /media/sda1 doesn't exist at all, "df" shows:
...
df: /media/sda3: No such file or directory
df: /media/sda1: No such file or directory
df: /media/sda2: No such file or directory
...
2, This is because the mount data comes from proc setup during early boot
before the change root, which then uses a different root filesystem, the
media is not in the new root filesystem.
3, During early boot before switch_root, use `mount --move' to move all
medias to the new root filesystem could also fix this issue.
[YOCTO #2064]
[YOCTO #3705]
(From OE-Core rev: 79bd773cc5e8b8e873cabeb2b9a91f460501dad7)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need unittest so bitbake-selftest can work, tarfile from the compression module
for opkg-utils and json for webkit builds.
(From OE-Core rev: bbcb7329ca4340dbd3d529567dc6b605347e3368)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold
Khem Raj
Jackie Huang
Chen Qi
Paul Eggleton
Alex Olson
Adrian Dudau
Hongxu Jia
Roy.Li
Mark Hatle
Björn Stenberg
Randy Witt
Richard Purdie
Ross Burton
Jonathan Liu
Christopher Larson
Laurentiu Palcu
Felipe F. Tonello