Applied the full set of first draft revision edits for the
new migration section for 1.7. Comments from Paul Eggleton.
(From yocto-docs rev: 90586addbc719ecaf7c768b267adf0e988e27b74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable has been replaced by the KERNEL_MODULE_AUTOLOAD
variable. I updated the description to note that and to provide
a cross-reference to the new variable.
(From yocto-docs rev: 8b2f464f7d100db1c585ccc62d7cab89f7f7b164)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added this description to the variables glossary.
(From yocto-docs rev: 3da322f92d5028e96422e0c1f5df78b285f2355e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added this new variable to the variable glossary.
(From yocto-docs rev: d2d75631777f6cef3472bde428ed65419c99457e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This description was a bit confusing with the way the general
syntax was described so I re-wrote it a bit. Also, added the
requirement that if you use module_conf for a given <modname>,
then you must also include the <modname> as part of the new
KERNEL_MODULE_PROBECONF variable.
(From yocto-docs rev: 15b7819a0d9946ad6565576a6f28897e2dd724f9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a space-separated list and not a comma-separated list.
(From yocto-docs rev: 23cf09ac128289e878bbc056e28060008ab5217c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Corrected some wording and also the first example.
(From yocto-docs rev: d641cdbf697b14d8122b3a018b06eed3437011ad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was confusion about how this actually worked when you
do not create a package for a package listed with the variable.
Cases for when the build would throw an error or not had to
be clarified.
(From yocto-docs rev: 02f95339322afe53db816b3b73234490d835b1ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6629]
Added a new variable description to the glossary and also updated
the IMAGE_LINGUAS entry to have a back-reference to the new
variable.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 219097735c57a3dc10195511dd5b199e73b8a094)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6621]
This is a new variable that helps control how debug symbols and
source files are split off when creating -dbg files for use with
GDB.
(From yocto-docs rev: 506b79707f6aec7c14f1f9d7e5099d20fca45c0e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initrd image used by the Linux kernel is list of file
system images concatenated together and presented as a single
initrd file at boot time.
So far the initrd is a single filesystem image. But in cases
like to support early microcode loading, the initrd image need
to have multiple filesystem images concatenated together.
This commit is extending the INITRD variable from a single
filesystem image to a list of filesystem images to satisfy
the need mentioned above.
(From yocto-docs rev: 051ef2e4d6480b28d21a59a79b6f0dca1a5944bd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the "svk" protocol and added in the ClearCase one.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 21b241990dec9b7beeeec639ac6c6e9b22f2b871)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6499]
Fixed a couple example INCOMPATIBLE_LICENSE examples so that
they now use the canonical licensing names GPL-3.0 LGPL-3.0 AGPL-3.0.
(From yocto-docs rev: d2d6be323d1a5ed9da88b7924954f9733a78da84)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* INITSCRIPT_PARAMS - noted the default
* INITRD_IMAGE - added a reference into the image-live class.
(From yocto-docs rev: 152cb93ca591c46a1344f2f09e0f85f14519ddf3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6499]
Updated three areas to include similarly licenced components
regarding the use of non-GPLv3 licensing.
(From yocto-docs rev: 88c0720e4070be58fbde17bc04db2b53c3307bf8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a reference that was not linking to the manual but
was instead referencing the Source Directory structure.
(From yocto-docs rev: aae3fb868e95ef2dbd548a5f9d1ea61a013190cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Conflicts:
documentation/ref-manual/ref-variables.xml
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the ref-manual, I added a new variable description for the
PTEST_ENABLED variable.
In the dev-manual, I added a note to the "Adding ptest to Your
Build" section to mention that the OpenEmbedded system uses
PTEST_ENABLED to enable or disable building ptests and that
the user does not set this variable directly.
(From yocto-docs rev: 52d6608caaa25378b873e41e1ddd05356ff8629a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit about values being passed through the
update-rc.d command and then a reference to the command's
page.
(From yocto-docs rev: e007414608ed801e440b701d6c43dca955a11611)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the link into the section for understanding how
OVERRIDES work.
(From yocto-docs rev: f897b9d0cc51899f3e4ce05b69a3c1dd429780d7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More detail added.
(From yocto-docs rev: 84177a600f84af4cc41b9493b46e2a23bc7ccc19)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5463]
In addition to adding these two new variables, I did some cleanup
of the TUNEABI variable description for consistency.
(From yocto-docs rev: cf5c5fd0cb262b8da030ac923fda902d9e007b21)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New glossary entries.
(From yocto-docs rev: dbf566e1009d51ad8fce1ac8251249a70fb9270c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New variables added to the glossary.
(From yocto-docs rev: 903ed6d26d7d32e4c1237fa9fd44b7471f1a41f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 5463]
Added the TUNE_ARCH variable. Also placed a cross-reference to
TUNE_ARCH in the TARGET_ARCH variable.
(From yocto-docs rev: 85d2a49323e0040b263b6d7f08fd036a25297b05)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul reported that "buildimg" was being used as the class name where
it should have been "bootimg". Not quite sure how this slipped through
but it has been fixed now. There were five occurrences.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: fdd6a6725bd22e4272a99a3da179cd69c4a221a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistency on how we refer to a task name throughout
the YP manual set. The proper way is "do_<taskname>". Some
occurrences did not include the "do_" prefix. These have been
fixed.
(From yocto-docs rev: b32821bb0d3e6de7bca68b25c662a023526a10c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed a view wordings to more accurately describe what was
going on. This was feedback from Paul Eggleton's review.
(From yocto-docs rev: 6152a849c0e26178ce13a29b1f353d1b2912427c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added "meta" as part of a path.
(From yocto-docs rev: 14cda136d1f8690f5ea15b218f2ab4fb49c0afa9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I implemented some review feedback from Paul Eggleton on these
variables:
TARGET_CFLAGS
BUILD_OPTIMIZATION
SDKMACHINE
IMAGE_ROOTFS_ALIGNMENT
IMAGE_DEVICE_TABLES
EXTRA_IMAGECMD
SSTATE_MIRROR_ALLOW_NETWORK
PACKAGE_ARCHS
SDK_PACKAGE_ARCHS
(From yocto-docs rev: 6fd804376367449494d5a5cfeb7e9bb2f4c04de1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had the wrong description in here.
(From yocto-docs rev: eafe3fb2324d6361ee799177ffbb3de05795a2e2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a link to IMAGE_ROOTFS.
(From yocto-docs rev: b87975da8f99926f220d11a02b1655245d00f8e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the following variables:
CFLAGS
CPPFLAGS
CXXFLAGS
(From yocto-docs rev: 58d82513ef70287717e7e208742aa72196708fc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the following variables with minor changes:
TARGET_CC_ARCH
BUILD_CPPFLAGS
BUILDSDK_CPPFLAGS
CPPFLAGS
TARGET_CPPFLAGS
(From yocto-docs rev: f7d48ed379778a8568c7e5f812cdb1cbc5339f39)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the CFLAGS and TARGET_CFLAGS variables.
Created these new variables:
BUILD_CFLAGS
BUILDSDK_CFLAGS
CXXFLAGS
TARGET_CXXFLAGS
BUILD_CXXFLAGS
BUILD_SDKFLAGS
CPPFLAGS
TARGET_CPPFLAGS
BUILD_CPPFLAGS
BUILDSDK_CPPFLAGS
(From yocto-docs rev: 00d1895f56f8d65944549ab216d1e0ccdceea674)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the creation of the new chapter that documents the 51
tasks defined by the OpenEmbedded build system, the remainder
of the ref-manual had many first-instance occurrences of do_*
task names that could be cross-referenced to the new sections.
I have added these links.
(From yocto-docs rev: 2ff39bd226a1d8f11924283bbaa3542a9d936ba3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
Edits to fix the occurrences of VIRTUAL-RUNTIME_initscripts = "".
I removed it from all places in the manuals except under
"Selecting an Initialization Manager". Note that it still
needed removed from "Using Systemd for the Main Image and
Using SysVinit for the Rescue Image".
Also, in the "Using Systemd Exclusively" section I made some
edits as suggested by Paul Eggleton's review.
(From yocto-docs rev: 28b2e3eba3acff17f165899a7f4a65c98263e201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Applied edits to the section in the dev-manual on running tests
on hardware.
Edited the TEST_TARGET and TEST_IMAGE variables.
(From yocto-docs rev: a26ba11c739aabab4009a944d9b622e2814c7fca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 5766]
I removed the note about the "live" IMAGE_TYPES. Turns out I
was wrong on this information. It does not create a "directdisk"
image. That is accomplished through a .bbclass.
(From yocto-docs rev: a3b762be9933178e9cecdac3fa9e110c031a64d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6125]
Did some re-writing based on Jonathin Liu's feedback.
(From yocto-docs rev: bee4a584bcb1e70e9848324781c32d1d9e3d1fc2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor re-wording edits as suggested by Paul Eggleton.
(From yocto-docs rev: 699eec0b691a19b4ae2f05c7774f559898e952da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4961]
Documented the user requirement to use PACKAGE_INSTALL to specify
packages for installation into an initramfs image. Normally,
you use IMAGE_INSTALL. To account for this user model, I updated
the PACKAGE_INSTALL and IMAGE_INSTALL variables. I also added
a bit more information to the "Images" chapter item that
talks about the core-image-minimal-initramfs image.
(From yocto-docs rev: a1ad649cf310f281a7de584d5b9a1820ca99d4eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Applied some feedback to the variables based on Paul's comments.
Needed a caveat on how you can use these variables.
(From yocto-docs rev: ef8fac4b36089d3162ee16c93866a39bcd31701c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Two new variables added to the glossary. These help with
specifying kernel modules that need to auto-load on boot and
with specifying module.d syntax in the modname.conf file.
(From yocto-docs rev: 1ac544c4f6129faafea10691b426cd510ff56a69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced the v3.4 version example with the v3.10 version.
It is more up-to-date.
(From yocto-docs rev: 2e7f5d4fbe24a8248686c9ca7cf870204966beec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied this patch from Dennis and then removed some whitespace,
used the 5-space indentation convention for the literal, formatted
the task name and did some other minor fixes.
(From yocto-docs rev: 477a9ecb2f91681ee401478189a424793381bfcb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>