Whilst debugging other issues I noticed this was out of sync with the code
in systemd itself. This brings things back into sync and shouldn't hurt
anything.
(From OE-Core rev: b188bda18690dc1af1cb5d18bb0f3ad40c9a6cc6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many of the init scripts in here will do nasty things if systemd decides to run
them. Mask the obviously bad ones so that systemd won't attempt to invoke them
if initscripts is installed with systemd.
(From OE-Core rev: 844f897710dfee9c59599d09b5c8c906e0d70ac0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will enables us to use journald-gatewayd
(From OE-Core rev: 09706953cf0e1b97d5b8808bdca1e8c125b8a9f7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These set of patches fix journald exhibiting some issues
under load.
One of the prevelant issues is that when appending to journal
it is not able to allocate memory and starts taking 100% cpu
spewing errors like
systemd-journald[2934]: Failed to write entry (19 items, 452 bytes), ignoring: Cannot allocate memory
Other memory issues crept up with time e.g.vacuuming
(From OE-Core rev: b1bdc1c6fb6914d85f888acde9d806d5560c84d8)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The nfs init scripts have both systemd and sysvinit versions with
non-matching names so we need to mask out the duplicate scripts
else we see NFS errors on bootup.
(From OE-Core rev: 6fadb3f27c48bb92f9f9de5977707a6b244aac54)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a race condition in the makefile that can result in build failures like
this in parallel builds:
| ./gdbus-test-codegen-generated.h:7:0: error: unterminated #ifndef
| #ifndef __GDBUS_TEST_CODEGEN_GENERATED_H__
Fix the rules to stop this happening.
(From OE-Core rev: 97ccd2b841c9dc598dbe39162f335bcde48a7c26)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the systemd/sysvinit DISTRO_FEATURES are changed without wiping the package
feeds it's possible to build an image that pulls in mismatching versions of
systemd and udev. This leads to images that are broken and don't boot
correctly.
Prevent this by adding a version-locked dependency on udev in systemd so that
images that attempt to install mis-matching versions don't build.
(From OE-Core rev: cb64f979ac4d792027a4a85fe086d0854e7bc9bc)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the image is built with both systemd and sysvinit there'll be a dbus-1 init
script and a dbus service. This means systemd can try and launch both, which
won't work.
There's a systemctl mask to stop this in systemd-compat-units, but the logical
place for it to be is in the dbus recipe so it can't be left out of an image.
(From OE-Core rev: c910aa17689077362a25938aeebee7fb24057e30)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 5cab5935d6924e0aca5da4b682bb83e54f20bc1d added dependencies on
docbook-utils-native and linuxdoc-tools-native, even though the same
commit ostensibly disabled building of the documentation and there was
no explanation of why these dependencies might be necessary. It appears
that they don't serve any useful purpose so let's remove them again.
(From OE-Core rev: 435f0c2c86cec4bc40731eaddec6c59260dd1ef5)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* libcgroup requires native packages for bison and flex to configure
itself successfully. Added those in its DEPENDS.
(From OE-Core rev: b50bdeaea15fcd24fd2c03fd02d4a1a365948cef)
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport a patch from upstream to fix skipped tests, essential for gdk-pixbuf to
pass without enabling all loaders.
(From OE-Core rev: 4bf996557409b63c2d783f175c6325c966aae236)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current change contains two different logics resulting that users like me
may need to partially override the behavior of it. It would be easier for end
users to keep one change while dropping the other if needed, like in our case.
(From OE-Core rev: 0ca984f32682151cfeff852167f0174aca20a8bc)
Signed-off-by: Laszlo Papp <lpapp@kde.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding ability to use postinstalls intercepts in the nativesdk env, and
making sure the correlate between repo + SDK.
This to enable rootfs generation from a package repository using only a
package repository and the toolchain tarball.
See https://github.com/nysan/rootfs-sandbox for examples.
(From OE-Core rev: a54bab492903322e2a2495ea9576ee6b3272700a)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To correctly integrate with busybox in our system, we should add
'stat' to base_bindir_progs so that the 'stat' commands from busybox
and coreutils both register to /bin/stat.
Previously there was a patch in busybox to move 'stat' to /usr/bin.
But as we can easily solve this integration problem by modifying the
coreutils recipe, this patch has been removed. After all, maintaining
a patch that's not accepted by upsteam should not be our No.1 choice.
(From OE-Core rev: d98d6122bdfd84faaa37912ca66dabebc7eb9da6)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade busybox to the stable release 1.22.1.
During this upgrade, 9 patches are removed. Reasons are detailed below.
The following 6 patches are removed as they have been merged.
meta/recipes-core/busybox/busybox/busybox-lineedit-initialize-delptr.patch
meta/recipes-core/busybox/busybox/busybox-list-suid-and-non-suid-app-configs.patch
meta/recipes-core/busybox/busybox/busybox-sed-fix-sed-clusternewline-testcase.patch
meta/recipes-core/busybox/busybox/busybox-sulogin-empty-root-password.patch
meta/recipes-core/busybox/busybox/find-get-rid-of-nested-functions.patch
meta/recipes-core/busybox/busybox/testsuite-du-du-k-works-fix-false-positive.patch
The following three patches are removed because they are mainly about moving
binaries from /bin to /usr/bin to make the update-alternative work correctly
at rootfs time. We can easily solve this problem by changing recipes. There's
no compelling reason why such patches are needed.
meta/recipes-core/busybox/busybox/run-parts.in.usr-bin.patch
meta/recipes-core/busybox/busybox/stat-usr-bin.patch
meta/recipes-core/busybox/busybox/watch.in.usr-bin.patch
(From OE-Core rev: fa282186d82e8fe3c590d4ea79e464116e5ceea2)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As sysvinit doesn't inherit update-rc.d, we need to add this dependency
manually.
(From OE-Core rev: 4ea9ca2bbacb20c3ed454b80e2c020c1073f3299)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of manually adding initscripts to RDEPENDS of each package,
we should make it automatically handled by the update-rc.d.bbclass.
This solution would have the benefit of backward compatibility. In
other words, users need not modify their recipes.
This reverts commit 16080a3485.
(From OE-Core rev: f9f193219bd510160b6b09bae652a9dc8ea01e7b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the typo in the RDEPENDS statement to make it have real effect.
(From OE-Core rev: aa1224e4d83a4273848ba7601162157f5e415e30)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some postinstall scripts use the qemuwrapper script, so to be able to
offline install these packages outside of the bitbake environment, this script
needs to be exposed also in the SDK.
This to enable rootfs generation from a package repository using only a
package repository and the toolchain tarball.
See https://github.com/nysan/rootfs-sandbox for examples.
(From OE-Core rev: cc583b20a8d924f2c0c9754b71740449762d7391)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Other recipes dependencies and even some comments need to be updated
for the removal of unfs-server and the replacement with unfs3. The
unfs3 is a complete drop in replacement providing all the prior
functionality of NFSv2 but also adding NFSv3.
[YOCTO #5639]
(From OE-Core rev: d577c56519a448b142da5b43e46d5bd9d3a3b4bd)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove this service as it's moved to the run-postinsts recipe.
[YOCTO #5719]
(From OE-Core rev: 1e3ac15fcf502396f92c69788642a56064e22e35)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
define failure/success/warning/pass functions, some packages' initscript
need them, and /etc/core-lsb/lsb_log_message from lsb needs them too.
(From OE-Core rev: b78154c4a52b5a198e90bca8f83990fe9251fb72)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch mainly comes from meta-systemd with a few modifications.
The purpose is to get rid of the LSB init scripts in systemd images.
[YOCTO #4420]
(From OE-Core rev: 5d90c5ebdb899b2951c97a94ff57867c1e491c15)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch mainly involves four changes.
1. Ship the sys.tar.xz and extract it on target to avoid ELOOP error.
2. Make systemd-ptest rdepend on bash and perl as the test cases need them.
3. Fix paths in Makefile so that the test cases could run on target.
4. Install ${libdir}/udev/rules.d directory to make udev-test.pl work.
[YOCTO #5664]
[YOCTO #5673]
[YOCTO #5674]
(From OE-Core rev: 03ed9095b1ca54a060407f355be0ad9ec86b7610)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I created this after a git grep to look for files impacted by the x86
tune changes. I need a careful review here to determine if this is in
fact the right thing to do.
(From OE-Core rev: 0f3f8d6cad190cb8de9dba56c5933abdf4d99d07)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the tests are enabled then configure will check for the presence DBus. It's
generally present through the runtime dependencies so this often succeeds but as
it isn't a build dependency it's possible for DBus to be present at configure
time but removed at compile time, resulting in build failures.
(From OE-Core rev: 0150e86a7609579cf26f5ef5c6c69b521340218e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mappedfile ptest was attempting to write into directories that may not exist
on a non-Sato image. Instead, write into TMPDIR.
(From OE-Core rev: 93b4ecc263947826421d5b4fb1f99fe506b24287)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test was attempting to connect to a session bus and hanging if it couldn't.
Take a patch from upstream to correctly use a private bus.
[ YOCTO #5696 ]
(From OE-Core rev: 12e30b653899567312a7ec29b6e972c85ba8e25e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding "doc-pkgs" to IMAGE_FEATURES (in an image recipe) reports a conflict with reset.1 file, present both in util-linux and ncurses-doc packages.
<log>
| Collected errors:
| * check_data_file_clashes: Package util-linux-doc wants to install file /home/matt/tmp/oe-p/build/tmp-eglibc/work/qemux86_64-tiny-linux/test-image/1.0-r3/rootfs/usr/share/man/man1/reset.1
| But that file is already provided by package * ncurses-doc
| * opkg_install_cmd: Cannot install package util-linux-doc.
| WARNING: /home/matt/tmp/oe-p/build/tmp-eglibc/work/qemux86_64-tiny-linux/test-image/1.0-r3/temp/run.do_rootfs.13877:1 exit 255 from
| opkg-cl -f $INSTALL_CONF_IPK -o $INSTALL_ROOTFS_IPK --force_postinstall --prefer-arch-to-version install `cat $1`
| ERROR: Function failed: do_rootfs (log file is located at /home/matt/tmp/oe-p/build/tmp-eglibc/work/qemux86_64-tiny-linux/test-image/1.0-r3/temp/log.do_rootfs.13877)
</log>
Same issue already occured few months ago:
Re: [OE-core] Clashing man pages
https://www.mail-archive.com/openembedded-core@lists.openembedded.org/msg38590.html
(From OE-Core rev: 67499dbffd0f7241fd199b7fb94edfe2cebe8a9b)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
init-live.sh: $CMDLINE variable should be provided to switch_root
to let user specify runlevel on grub command line.
Feeding with -c /dev/console as well as busybox switch_root enables that option.
(From OE-Core rev: 5a2f4feeaac4f9278fa0cf808c2f495f0c19324f)
Signed-off-by: Krzysztof Sywula <krzysztof.m.sywula@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, tow successive toolchain builds for different hosts, will
issue a warning:
WARNING: The recipe nativesdk-packagegroup-sdk-host is trying to install
files into a shared area when those files already exist. Those files and
their manifest location are:
/ssd/work/yp1/build/tmp/deploy/ipk/all/nativesdk-packagegroup-sdk-host_1.0-r11_all.ipk
Matched in manifest-x86_64-nativesdk-packagegroup-sdk-host.package_write_ipk
Please verify which package should provide the above files.
That's because packagegroup is manually inherited after nativesdk which
is usually a BBCLASSEXTEND operation, done last.
[YOCTO #5396]
(From OE-Core rev: 7621a40d24f3e53b373f233e070894e4afc2b4b2)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the GLib tests that we run under ptest are missing runtime dependencies.
iochannel-test needs the EUC-JP encoding.
convert needs the ISO-8859-1 and ISO-8859-15 encodings.
contenttype needs shared-mime-info.
Add these to the RDEPENDS so that these tests pass.
[ YOCTO #5696 ]
(From OE-Core rev: 7b6316093ab28782edd45084d43dbd5c309be7c8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dnsmasq recipe in meta-networking ships a dnsmasq.service file, that will
correctly override the SysV init script. Thus, as pointed out by Ross Burton,
we should remove dnsmasq from the list.
(From OE-Core rev: 69a8153c55bf74fa6178d6bd65ac8e761c041a0e)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly disable systemd support so that it isn't a floating dependency and
libsystemd-login doesn't become a runtime dependency on non-systemd images.
Also don't bother setting the systemd unit directory as we're not installing
anything.
(From OE-Core rev: 4f5d00b551e2ee6056ebfc8365a05a5ca8e5d651)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch application failed on the autobuilder for pam, this refresh of the
patch should resolve the build failure.
(From OE-Core rev: c4c5ec52effc2ff97ac17270c1aa7884c808f5a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Respect the OpenGL distro feature and if it's enabled, pull in piglit and
mesa-tools.
(From OE-Core rev: cd61c62ed30694eeb82e88e058a3a3e1bfb06f78)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The cross-canadian packages were split into their own package group
some time ago. These two are leftovers and can be safely removed.
(From OE-Core rev: 0f05393bad8ac84627f339aa1619c96c22d2dc37)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dependency here needs to apply for nativesdk as well as target packages
as the autobuilder just tripped over that. We'd never want a native version
so I'm not sure why the target class override was even present. The dependency
also applies to do_package so lets be explicit about that in case sstate
decides to get clever.
(From OE-Core rev: b7ec21ac8ebac9d7fba34d6f11d93ecb8f561ca8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LIC_FILES_CHKSUM has changed with the introduction of a BSD-3-Clause
algorithm (curve25519-donna); this has prompted a re-evaluation of the
LICENSE value which should now reflect the licenses declared in the
upstream documentation. Thanks to Beth Flanagan for helping with this.
(From OE-Core rev: 232e8b96988ffa6e5107917fbf41222d26e4e90b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do also check systemd_unitdir/system/ for available unit files.
This was hiding dnsmasq.service for us, as /etc/systemd/system has
priority over systemd_unitdir/system...
(From OE-Core rev: 5aea3d375b717d96f8f916f2f830e8f8649a4991)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In vi mode, the 'p' and 'P' commands caused a segfault when nothing had
been put in the buffer yet because the delptr was not initialized.
(From OE-Core rev: 21ba0297409bfc6e0fb89f45c9bfed8981c7df5b)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have enabled SEAMLESS_GZ and SEAMLESS_BZ2 in defconfig, it's
reasonable for us to enable SEAMLESS_XZ as well. Otherwise, we
couldn't extract tar.xz file while we could extract tar.gz file.
Such situation would be somewhat confusing.
(From OE-Core rev: 6482a43211a3a4858030ae3c59f5726c0ccba261)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the initscripts-functions has been packaged separately,
packages which may use the functions script should have a runtime
dependency on it.
(From OE-Core rev: 6690c12cb1977f6bf93f3eb6d471dbd7db81bf28)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many SysV init scripts need the /etc/init.d/functions script. But
this script is part of the initscripts package. As a result, the
initscripts package should always be installed into the system to
avoid errors when starting daemons. However, it makes no sense to
install the initscripts package into a systemd based image, because
what the init scripts provide has already been provided by the systemd.
On the other hand, the functions script might be still needed in a
systemd based image because other init scripts such as distcc might need
it.
The above situation leads to a natural separation of the functions script
from the initscripts package. And this patch does so. It separates the
functions script into initscripts-functions packages.
(From OE-Core rev: 736dd8380f41d6ff1d3d0e4fe33cc01e2e873ef6)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All dev related items should be packaged in the core PN package not in seperate packages.
(From OE-Core rev: 4bac11ffe389f10ca53b339a31eac167224dbc06)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade coreutils to 8.22.
Changes since 8.21:
1) Remove the acl patch as it's not needed now.
2) Add a new patch to fix the following compile error.
"dummy-man: too many non-option arguments"
(From OE-Core rev: 144a48e34d17fd8736a482bae4ee69efc37b8a1f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were disabling API entry point sanity checking which should only be done if
the performance gain is prefereable to correctness. Instead don't disable
checks explicitly as the default is enabled, allowing distributions to append
--disable-checks if required.
(From OE-Core rev: 079975e456abe9e76bde3f2866ffe50f2610345f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of several variables and overrides, use PACKAGECONFIG to respect X11 and
systemd DISTRO_FEATURES.
(From OE-Core rev: 963da99c77ad28bd184a4de59af9cbcfaef62358)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The uclibc configuration requires the gnu libiconv, so tell configure which one to use
[YOCTO #5431] (one of many)
(From OE-Core rev: a90b32d63c8a816462b42a33851e4e5e6041bbca)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure both versions have the same values.
(From OE-Core rev: 164daf1398573bb503dbe301b4df5aabbc7cafc2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These recipes all had a long DESCRIPTION but no SUMMARY; since the
SUMMARY is often displayed alone by package managers and the default
value ("${PN} version ${PV}") isn't particularly useful, we should
always try to set SUMMARY.
(From OE-Core rev: db02edd2e9d7645592933cbb25ea0ca4d6561392)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A lot of our recipes had short one-line DESCRIPTION values and no
SUMMARY value set. In this case it's much better to just set SUMMARY
since DESCRIPTION is defaulted from SUMMARY anyway and then the SUMMARY
is at least useful. I also took the opportunity to fix up a lot of the
new SUMMARY values, making them concisely explain the function of the
recipe / package where possible.
(From OE-Core rev: b8feee3cf21f70ba4ec3b822d2f596d4fc02a292)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting this value to blank or "n/a" in just a few recipes accomplishes
nothing.
(From OE-Core rev: 2d6f11d6bae8b03a00086f1dd43ca1853ac667d5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The upgrade changed the checksums for dbus but not dbus-ptest. This
patch corrects that.
(From OE-Core rev: 9e56856a15d80bf57b8a4fe54508141da46581f2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd will create the machine ID automatically if it isn't set, so this unit
doesn't serve any purpose.
(From OE-Core rev: 8e6da3d8973777d9b651d085e06ee20a761ed62c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
${localstatedir}/log/journal is created by tmpfiles.d on boot, and the README
just causes warnings that /var/volatile isn't empty when mounting on top of it.
(From OE-Core rev: dfcd8f2a6f5847d735755c1644c4c93be4fbb3e8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop PR and INC_PR.
Move patches into a non-versioned directory, and update dbus-ptest to match.
(From OE-Core rev: 0289a1c325eea881ce3d68def5262f9e763d4fd2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows us to compile busybox using clang. Nested functions is
a gcc extension not supported by clang.
(From OE-Core rev: d2bf599f36ed1a04c661fc0a71e664e219532cbc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On mpc8315e, a system freeze is encountered at system boot time if
connman and init-ifupdown are installed.
The error message before the freeze is:
"ip: RTNETLINK answers: File exists"
This problem is introduced by the following commit.
dc80eea sysvinit: fix problem in switching runlevels
Part of the above commit is to make the networking init script run
at runlevel 2 3 4 5 instead of runlevel S. However, after the change,
networking is run after connman. And this causes the problem stated
above.
Make networking run first when entering runlevel 2 3 4 5, so that we
don't break things.
[YOCTO #5651]
(From OE-Core rev: d518892d38ac399c091ff509a9fd90fc00d71224)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install udev test suite and run it as a ptest.
(From OE-Core rev: 34430ecdc4bb7414ca865df1b164bce1e4fec6fa)
Signed-off-by: Alexandra Safta <alexandra.safta@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd has presets as described here
http://lists.freedesktop.org/archives/systemd-devel/2011-July/002830.html
This patch will let distros define presets file
which will override the enable/disable specified
by recipes.
systemctl preset without any argument will run presents
on all services
systemctl preset service1 service2 will run presets on
specified pervice.
something like enable * or disable *
would mean that all services will be either enabled or
disabled by default.
If no user-presets are specified then 'enable' is default
systemd allows basic globs but we do not implement them
except '*'
(From OE-Core rev: 1254416901a0c70814296a86784f4934f27c7d4a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per discussion on the mailing list [1], remove this largely
unmaintained external toolchain support in favour of the maintained
version in meta-sourcery [2].
Also correct the example and documentation.conf entries for TCMODE to
match up with this change.
[1] http://lists.openembedded.org/pipermail/openembedded-core/2013-December/087133.html
[2] https://github.com/MentorEmbedded/meta-sourcery/
(From OE-Core rev: 7603b15415301679bccbcb89af688c211704a43a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow offline creation of a rootfs, using only
the RPM package repository and a toolchain tarball.
Ref: https://github.com/nysan/rootfs-sandbox
(From OE-Core rev: 80a8ecf91181f2fbec1a45231615b12949327970)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GMAE (GNOME Mobile And Embedded) doesn't really exist anymore and these packages
were a subset of it anyway. Remove as they don't give the user anything useful
now that you can generate a SDK from an arbitrary image.
(From OE-Core rev: c44fa1206c965054e8e4d316969a8e291cfef590)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When processing startup scripts which use update-alternatives, we need to keep
resolving the symlink recursively until we hit a real file, due to the
alternatives indirection. This fixes the ability to run certain postinsts at
do_rootfs time, which is needed for good read-only-rootfs support.
(From OE-Core rev: 987a203f85e9474fd1807e577c7fd8c30ecf78d6)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The '-c DEV' option is specific to the switch_root provided by busybox.
switch_root from util-linux doesn't recognize this option. As a result,
if we we this init-live.sh script together with util-linux, we would get
a kernel panic when executing switch_root.
Besides, this option doesn't seem to have any useful effect as far as I
can see. Removing it doesn't affect the behaviours of our live images.
(From OE-Core rev: 6f50ccb8ae9e11870f99bb3b191f677c3633cd0d)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the contains function results in more optimal sstate checksums
resulting in better cache reuse as we as more consistent code.
(From OE-Core rev: 9c93526756e7cbbff027c88eb972f877bcb1f057)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having eglibc rebuild every time DISTRO_FEATURES changes is suboptimal.
This rewrite takes advantage of bitbake's understanding of the contains
function so this doesn't happen. The code is marginally uglier but is
worth the benefit in fewer libc rebuilds.
(From OE-Core rev: 9a272ee6d72fc727a2dfe660ceded560a9f1ae88)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is little point in including the file twice so lets not. The
main recipe already included it.
(From OE-Core rev: b3cccee0c66ce744a79843a5dd9798475c84e23c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add busybox_git.bb recipe so that it would be easier to hack with
busybox. Set DEFAULT_PREFERENCE to "-1" in the git recipe so that we
still use the busybox_1.21.1.bb recipe by default.
(From OE-Core rev: d290bbe6d9826fbcfa2e0a7624886284697ed7eb)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install zlib tests and run them as ptest
(From OE-Core rev: 2988cef2f0ad857b5bbf6a0189ffb0fb88795f8c)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is used for fixing coreutils 6.9 (GPLv2+) do_installed failed:
[snip]
| coreutils.texi:2499: @itemx must follow @item
| coreutils.texi:2636: @itemx must follow @item
| coreutils.texi:2644: @itemx must follow @item
| coreutils.texi:2654: @itemx must follow @item
| coreutils.texi:2677: @itemx must follow @item
| coreutils.texi:2689: @itemx must follow @item
| coreutils.texi:2820: @itemx must follow @item
| coreutils.texi:3058: @itemx must follow @item
| coreutils.texi:3253: @itemx must follow @item
[snip]
Use '@item' instead of '@itemx' in several places, as Texinfo 5 refuses
to process an '@itemx' that is not preceded by an '@item'. Ensure that
node extended names in menus and sectioning are consistent, and that
ordering and presence of nodes in menus and in the actual text are
consistent as well.
[YOCTO #5593]
(From OE-Core rev: 04fab782f42b8f5047390042618f9c841b8c3a96)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This doesn't exist when using systemd as it's part of the sysvinit package, and
this script doesn't need it.
(From OE-Core rev: 426a22bb67c7823ee733f8c2bd85421b785c3631)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
readprofile was missing from the alternative configuration, which was
causing readprofile to be packaged into the base util-linux.
(From OE-Core rev: cac08f23aaed87148d1825cca3c7586ab891ef04)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the test "Test against HP-UX 11.11 bug: No converter from
EUC-JP to UTF-8 is provided" since we don't support HP-UX and it
causes guile-native compile failure if the euc-jp is not installed
on the host.
(From OE-Core rev: ac902d0fdf44beda2d0954cc477a4e2b177a2f2a)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the systemd DISTRO_FEATURE is enabled, then recommend systemd-analyze for
profiling boot performance.
(From OE-Core rev: 20d2fad0d08eb337fdc80385bce32469a97e988a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Busybox also provides sulogin command, so we need to use the ALTERNATIVE
mechanism to manage it.
(From OE-Core rev: 8b3a799a87d18b1d113d59b3e7a681db5683e5f8)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 91c0f9e3 moves library files to base_libdir for safe while
symbol link libblkid.so, libmount.so and libuuid.so are placed in
libdir, not base_libdir.
Meanwhile, libblkid.la, libmount.la and libuuid.la are placed in
libdir too.
Thus they are missed by related develop package and
collected by util-linux's develop package at last. Fix it.
(From OE-Core rev: 4571c9e963c667bce8b61e88816b34ba74b2aab7)
Signed-off-by: Zhang Xiao <xiao.zhang@windriver.com>
Signed-off-by: Qiang Chen <qiang.chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In commit faa8cc6c2a582a32c695f3f2b0d45b6892c769fd dmesg.sh was
added to the set of init.d scripts. But the script was never put
in any run-level. This patch will add dmesg.sh to run-level S.
(From OE-Core rev: 7d2767d4e27c6d0eaa56f3e126df56e65a5364c9)
Signed-off-by: Hans Beckerus <hans.beckerus AT gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed early FILES_${PN} += for the pam config
files which would subesequently be overwritten by
a FILES_${PN} = .
(From OE-Core rev: e4cead9e97aecdc3d45910aca71eb1d9e9e9a2b6)
Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I also changed RDEPENDS_class-native to RDEPENDS_dbus_class-native now
(From OE-Core rev: 2678e2ee7ec4de75a9e50a6a0d5f2b7f1b95aee8)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, EXTRA_OECONF would be overwritten by EXTRA_OECONF_class-native
and EXTRA_OECONF_class-nativesdk.
As a result, some applications such as `last', `mesg' and `reset' didn't get
compiled.
The patch rewrote EXTRA_OECONF_class-native, EXTRA_OECONF_class-nativesdk
and EXTRA_OECONF variables to fix QA warnings.
usr/share/man/man1/last.1.util-linux does not exist
usr/share/man/man1/mesg.1.util-linux does not exist
usr/bin/last.util-linux does not exist
usr/bin/mesg.util-linux does not exist
bin/reset does not exist
(From OE-Core rev: 4cff0bd254667b145d765e1135f254c1916e2ee8)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
[YOCTO #5338]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't support multiple -dbg/-dev packages, the package can generate
them but the system does not correctly handle them. Just move all devel
stuffs into 'udev-dev' and all debug stuffs into 'udev-dbg'.
(From OE-Core rev: 014f7a33f399192268f28acac835551413c4768d)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, if we switch to runlevel 1 and then switch back to runlevel
5, the network interface will be brought down and the NFS service will
not be restarted correctly.
The problem is that the networking and rpcbind services are brought down
in runlevel 1 but not brought up in runlevel 5.
This patch fixes the above problem. It's based on the assumption that
in sysvinit-based system, runlevel 1 does not have networking support.
This patch adjusts some init script parameters used by update-rc.d. It
makes sure that networking starts before rpcbind which in turn starts
before mountnfs.sh. When switching to runlevel 0, 1 and 6, the umountnfs.sh
is run first before stopping rpcbind service, and the network is brought
down afterwards.
[YOCTO #5513]
(From OE-Core rev: f12e1291b51ba6692b6809570d6a9b73c70a7fe9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an race condition where psplash is not quite exited before the unmount occurs
causing a umount: /mnt/.psplash: target is busy message to appear, it's ok to lazyily
unmount and not get this message
[YOCTO #5244]
(From OE-Core rev: 9ded366084f22f48ef72aa22acf6a38982d16d97)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* because kernel isn't needed to build packagegroup and building
it doesn't influence if it's included in image or not.
(From OE-Core rev: 2935e7b2fc3c1a35e810eb4043638ffcd6682d0c)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 38b6c4df7c215ed7fd6be107fbc2527e66791e2e.
Its not needed anymore after upgrade to 2.38
(From OE-Core rev: 3efd8530053cf54e3f0b0fc6a96272fdb2ee27ba)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The .bb was getting larger with configuration being arbitarily split between .bb
and .inc. To help adding a glib_git recipe, strip the .bb down to SRC_URI.
Also don't remove $libdir/gio as it should be owned by glib.
(From OE-Core rev: 55b950500fd9d944042e3c2b0872685f0a60e8eb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It does not get stdarg.h included indirectly as it happens
on uclibc due to different include chain
(From OE-Core rev: eac8cb7cacab7f2fb392128aa5ebc2046ca4a793)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adjust the boot sequence in sysvinit based systems.
The mountall.sh (mounting the local file system) needs to be started
before udev and bootlogd.
This patch makes mountall.sh start before udev and removes the hack of
mounting tmpfs in the udev init script.
This patch also adds some comments to the udev init script to make it
clear why we create the '/var/volatile/tmp' directory.
[YOCTO #5273]
(From OE-Core rev: f6a9df6b7cd411b52e71022b8f7bf8bda6395649)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, our system had no boot log even if the bootlogd daemon was
started correctly. The root cause is that the log file doesn't exist
when starting the bootlogd.
Add '-c' option to bootlogd so that it will create the boot log if
it doesn't exist.
[YOCTO #5273]
(From OE-Core rev: 6059be3ab60b8ab463d438c47bb17553d184a790)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was still duplicated code in toolchain-scripts, this further cleans
up the functions to remove it. The now unused includedir parameter is also
dropped.
The final scripts do end up reordered slightly and the sysroot is parametrised
for the IDE scripts which is an improvement but should have no functional
difference.
(From OE-Core rev: 1dbd65b4d14319e784a66776c1e9943d0179d3ee)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having two scripts which do basically the same thing is a nightmare. This merges
them together. It also makes the sysroot location a variable in its own right
which may be more useful for end users wanting to change sysroot.
(From OE-Core rev: 213e0c67e938b802e6bb2246f00b7343a6f77b99)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will kill the not shipped Error:
ERROR: QA Issue: eglibc-locale: Files/directories were installed but not shipped
/usr/lib/locale
(From OE-Core rev: 168630394b3af47b7a914475865eed17b6a3b1a2)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The vtX terminfo files aren't being copied on systems where bash isn't
the default shell (debian, etc.). I removed the bash specific syntax
so the files are properly copied on these systems.
(From OE-Core rev: edd7d53c6149b27d5636a458db91650c8c400612)
Signed-off-by: Seth Bollinger <seth.boll@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "arch" is removed in util-linux 2.23, but some old
software and devs look for arch:
http://lists.gnu.org/archive/html/bug-coreutils/2007-06/msg00010.html
Use coreutils version.
[YOCTO #5404]
(From OE-Core rev: 9df8591a6e18afa592673cb454dc699a1341461d)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
[sgw: fixed ordering to be alphabetized]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in
commit fe039170236080291c0220476a5809774f82ee5c
Author: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Date: Wed Oct 2 10:55:32 2013 +0000
systemd-compat-units: Use correct run-postinsts script link
OE-Core commit 75a14923da has moved
run-postinsts script execution from S98 to S99 in rcS.d. run-postinsts.service
should check for this script and run it on first boot rather than
S98run-postinsts, which is for opkg/dpkg.
the link was corrected but the mentioned commit is not available. Instead of
reverting, we use the same variable as opkg for init script ordering and drop
a note in case somebody wants to change default.
(From OE-Core rev: 7aabc9408fb382f0ae39f9932b6d9ac391528b76)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove all PR = "r0" from all .bb files in oe-core. This was done
with the command sed -e '/^PR.*=.*r0\"/d' recipes*/*/*.bb -i
We've switching to the PR server, PR bumps are no longer needed and
this saves people either accidentally bumping them or forgetting to
remove the lines (r0 is the default anyway).
(From OE-Core rev: 58ae94f1b06d0e6234413dbf9869bde85f154c85)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/etc/init.d/dbus-1 use "set -e" to let the script exit when any command failes.
This will cause "/etc/init.d/dbus-1 status" command can't display messages when dbus is stopped.
(From OE-Core rev: 9844b5e2a544b2c2f76aac497c3a2cdfcc46577c)
Signed-off-by: Lu Chong <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since udev 174 udev has been running input_id as a built-in command and
setting this value in the environment for touchscreens. Use this logic
to detect when to make a touchscreen0 symlink.
(From OE-Core rev: 5abcfcd4380aacafc45d776f557738fb18089113)
Signed-off-by: Tom Rini <trini@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using the tar executable in the buildtools, tar will execute
gzip. If this happens before zlib-native is built, then the gzip
on the host will be used and can fail if the libz in the buildtools
is not compatible. Adding pigz to the build tools avoids this host
contamination.
(From OE-Core rev: af6424e8c2bf3a938fddabc669c0956d68964ed0)
Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's more reasonable and secure to keep /etc/shells a minimal file, and
then entries for valid shells be added dynamically to the system, only if
the packages that provide them are supported.
(From OE-Core rev: a1d6b55bfa5daa9ba5fa9a7a99dd8872284b6ad8)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
update to latest version 2013.60
Update 0006-dropbear-configuration-file.patch for 2013.60
(From OE-Core rev: 76e8b841d19789fe54ef650d6e8b42950fd27ceb)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mDNS name resolution is a key part of mDNS, so if the DISTRO_FEATURE is enabled
then install libnss-mdns.
(From OE-Core rev: ef2ee68778be8e5336cd33ab6551bce1d56047b6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
midori depends on webkit-gtk which could not build for mips64.
[YOCTO #5141]
(From OE-Core rev: abadeb934d4f41288c4fde6a4e5df2b124326326)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Test that filter backup module files (files starting with ~)
was accidentally reversed in e6039e6e3b98d6ab91252a5012d76279b1fac6e8,
this patch restore initial behavior.
(From OE-Core rev: b2eb846ee12989add7a7ca8bbf45f293a3a7e56d)
Signed-off-by: Michaël Burtin <michael.burtin@innotis.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* While working with a new capacitive touchscreen it was found
that the existing udev rule that creates the
/dev/input/touchscreen0 symlink was too restrictive and did not
match the MODALAIS entry for this touchscreen. which is:
MODALIAS=input:b0018v0000p0000e0000-e0,1,3,k14A,ra0,1,2F,35,36,39,mlsfw
* By looking at the input_print_modalias function in the Linux
kernel drivers/input/input.c file and referencing the meaning
of the evbits and attributes of the input_dev structure it seems
that for identification of a touchscreen the match with ,18
which was matching part of the absbit structure is overkill.
* It seems that the absbit entry is used for devices like
touchscreens and if that the the "a" is followed by 0 and 1 this
is sufficient.
* So the logic has now been changed to check for the "e" 0 and 3
values which correspond to EV_SYN and EV_ABS, then check for
the "a" attribute with 0 and 1.
* More information and history for this can be found at:
http://patchwork.openembedded.org/patch/25093/http://thread.gmane.org/gmane.comp.handhelds.openembedded.core
* This patch mirrors a patch done by:
Andrea Adami <andrea.adami@gmail.com>
(From OE-Core rev: d95a9b516861594bc89c7ee8079bab2904703ad2)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable docs creation for now it uses po4a and sgmltools-lite which are
not currently part of OE-Core
(From OE-Core rev: 5cab5935d6924e0aca5da4b682bb83e54f20bc1d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed patch that is now included upstream, add DEPENDS on check since it
is now used to create. Additional added PACKAGECONFIG for PAM and --disbale-vlock
License checksum updated to reflect additional Copyright owners names.
(From OE-Core rev: 48621dc693b5f63419e042ab5dd21ea12ce05f67)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If bootlogd was configured to write to a log file on the root file system,
the checkroot.sh was not able to change the rootfs to read-only because
bootlogd was started earlier and had a file descriptor open. Lowering
the order of checkroot.sh ensures that the volatile filesystem is set
up before anything writes to it.
(From OE-Core rev: 13c9bc143f6861517970dafdc7e7a45740d0933d)
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow packages that update kernel modules to run correctly
(From OE-Core rev: 72c23255cc88b5e2cd6f783231e6f42bf5190df7)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use PACKAGECONFIG to add options for ca-certificates, gnutls, and libproxy.
Enable ca-certificates by default as all it needs to know is the right path,
ca-certificates not being installed isn't fatal.
(From OE-Core rev: 1f03b6aa9e475f341815788613513ff63add8a5f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop the ptest patches and instead use --enable-installed-tests, updating
run-ptest to invoke gnome-desktop-testing-runner.
Drop the x32 build patch, upstream has integrated a similar fix.
(From OE-Core rev: 33bb8d5da050519043bb913bae4f5692bbd899ad)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the part after "tty" in the device name go into label along with
everything after that part. For example if SERIAL_CONSOLES="115200;vt100;ttyS0"
than label=S0 but if SERIAL_CONSOLES="115200;ttyS0;vt100" than label=S0;vt100.
If SERIAL_CONSOLES="..;ttyX;..", part after 'X' should also be trimmed.
(From OE-Core rev: b00b9ae5693e04cacd0843c12a529e7f3dc501ed)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core commit 75a14923da has moved
run-postinsts script execution from S98 to S99 in rcS.d. run-postinsts.service
should check for this script and run it on first boot rather than
S98run-postinsts, which is for opkg/dpkg.
(From OE-Core rev: fe039170236080291c0220476a5809774f82ee5c)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes the following QA error:
ERROR: QA Issue: nativesdk-dbus: Files/directories were installed but not shipped
/run
/run/dbus
(From OE-Core rev: 796b7510853e71f158ad18dcea4cd1a10c7ef294)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During parsing this recipe builds up a list of splash image files,
however it was recording full paths to local files (i.e. the files next
to the recipe) and then in do_compile it was pointing to those instead
of the fetched files in WORKDIR. Fix it to use the fetched files which
has the added benefit of the do_compile signature not changing if the
recipe is moved around.
Fixes [YOCTO #5250].
(From OE-Core rev: f1850f9835651baee8d3a0858d00a5d22efcab19)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems strange that runlevel always returns 1, The comment says it is
related to sysvinit, but if we enable systemd, sysvinit will not be
installed. and we have created a link for runlevel to systemctl if
systemd is installed.
(From OE-Core rev: adc11d60fd4b555198d6653cd71eb1372e0b03a0)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default value of SFTPSERVER_PATH is "/usr/libexec/sftp-server" defined in
dropbear-2013.58/option.h, but after commit 406bd38b423[bitbake.conf: change
libexecdir to ${libdir}/${BPN}], sftp-server is provided by openssh package,
and is installed into ${libdir}/openssh, so we pass it explicitly.
(From OE-Core rev: 5f6deb044226885912214532cebb1d871f03c53a)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xz is required on the target filesystem since it's needed
to unpack some of the bootstrap packages.
(From OE-Core rev: 3f302e6686e9c35d3fd771b8aed214bf739e59f6)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A text editor is needed to examine log files.
Part of [YOCTO #4727] fix.
(From OE-Core rev: e598642988d1be1812b8df8ecd4f9d53f66068c9)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
busybox 1.21.1 's mdev has changed the way the device's name is
reported so now we get input/event0 instead of event0.
I think this commit is responsible of this new behaviour :
http://git.busybox.net/busybox/commit/util-linux/mdev.c?id=c3cf1e30a3022453311a7e9fe11d94c7a381640e
Update mdev.conf according to this behaviour so that sound
and input devices are correctly populated (and now
/etc/mdev/find-touchscreen.sh is executed).
Tested on an arm board.
(From OE-Core rev: 61b2950ebbc01f5e4fd7aece05bf371100c0c390)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add useradd, groupadd et.c. since all target packages
which inherits useradd will have a postinstall hook
dependecy against the yocto specific groupadd.
(From OE-Core rev: 829edcb6e59e2e20dd4165b727b685f286f38031)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently do_install_ptest_base is failing because it cannot find
'test' directory in build dir, ${B}. 'test' directory is present in source
dir, ${S}. Same is true for build-aux/test-driver and test/sys.tar.xz.
Also this fixes:
QA Issue: systemd: Files/directories were installed but not shipped
/usr/lib/udev
/usr/lib/udev/rules.d
(From OE-Core rev: bec8a29fb27ccdada0839d0bdd67ae22179a94e8)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It causes shadow to be used in core-image-minimal and increase the
size by 1.5M. We will add the shutdown user to group via base-passwd
which we depend upon instead.
[YOCTO #5230]
(From OE-Core rev: e33e4c30a4fa5b98903d6a46cdcc5bca9cf50848)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since using useradd in sysvinit causes core-image-minimal to
gain shadow utilites instead of using busybox, we add the
shutdown group directly.
[YOCTO #5230]
(From OE-Core rev: 47ebf756efeb88727459165e00c16671854e19a9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5233]
Modeled after Chen Qi's fix to [YOCTO #3924] from oe-core commit:
6b6db7b4fb7aa17b8e29076decc830149b9d35bc
init-install.sh: remove unnecessary udev rules file to avoid error messages
/etc/udev/scripts/mount.sh is removed by init-install-efi.sh, but the
udev rules file which specifies the invocation of this script is not
removed, thus causing the error message during a live install:
/etc/udev/scripts/mount.sh: No such file or directory
The /etc/udev/rules/automount.rules no longer works once the mount.sh
script is removed. Remove it to avoid the error message.
(From OE-Core rev: 1f5a2b616d902b1158e348bf8c33b6d36e21cadc)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: mihaix.lindner@linux.intel.com
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5237]
The current grub.cfg manipulation depends on an existing root=
parameter. If this doesn't exist, the correct root= parameter will not
be added.
Instead, remove any existing root= parameters and add the correct one
explicitly.
(From OE-Core rev: 14b124122c1b7d10b9a3a96fe4617c6fc1c661c5)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: mihaix.lindner@linux.intel.com
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With buildtools (which contains Python) installed on a build machine,
glib-2.0's gtester-report script was ending up with the full path to
the installed python binary in the shebang, which when rpm packaging
was used led to this being added as a per-file dependency by rpmdeps for
the libglib-2.0-utils package in which it ends up. This of course broke
do_rootfs when the package was included in the rootfs and had been
restored from sstate from another machine, as happened on the Yocto
Project autobuilder.
We were already trying to sed this script apparently only for the
shebang (since it appears that there are no other paths in the script)
so let's just sed the shebang properly; it also seems sensible to do
this for native as well instead of explicitly trying to exclude that
case.
Fixes [YOCTO #5205].
(From OE-Core rev: 1d16e8035dda062041394b1e51839a9a7d077cf5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In busybox, util-linux and shadow, su has been moved to /usr/bin/,
but lsb cmdchk needs su in /bin.
Move su to /bin could fix this issue.
[YOCTO#5175]
(From OE-Core rev: ba84662bd9fb7575e68c87449e986535a2216b30)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In busybox, util-linux and shadow, su has been moved to /usr/bin/,
but lsb cmdchk needs su in /bin.
Move su to /bin could fix this issue.
[YOCTO#5175]
(From OE-Core rev: daff19fe6f0490dc7036602e8b0ca40a23b55556)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd-udevd is back in /lib, so revert this change.
This reverts commit 27bb516be4.
(From OE-Core rev: 3f6324a86cb8c1c253af06a1033ac71fa61c58d3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There would be an error when the TMPDIR is long/deep, for example when
len(TMPDIR) = 350 while our supported longest value is 410:
[snip]
aclocal: error: cannot open xxx
autoreconf: aclocal failed with exit status: 1
ERROR: autoreconf execution failed.
[snip]
Let aclocal use the relative path for the m4 file rather than the
absolute would fix the problem.
Another fix is that we can modify autotools.bbclass to let it use the
relative path rather than the absolute, but I don't think that we have
to do that based on the following 2 thoughts:
* The coreutils is the only recipe which has this issue as far as we
know when len(TMPDIR) <= 410, because it has the most amount of m4
files (more than 400 ones).
* That would impact all the recipes which use autotools.bbclass, and we
are not sure about the side effect, for example, it would break the
build there is a sub-configure.
[YOCTO #2766]
(From OE-Core rev: 22ac874512c2c1213aae8e1644bd59050b37a63c)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the external USB devices has internal USB hub, which
make them look like "fixed" rather than "removable". And USB
autosuspend does not work with some of these devices resulting
in inoperable pointing device.
Now the code detect these false "fixed" devices by looking at their
parents. If any of their parent is "removable", then USB autosuspend
is not enabled for that device, which keeps the pointing device
functional.
Fixes bug:
[YOCTO #5166]
(From OE-Core rev: d74a0ecdbc85a482cab6e7eae8dcb48185d44d84)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This CVE patch is actually against Chromium as they ship an internal fork of
libxml2 and breaks ABI. The real issue has been resolved in libxslt 1.1.27, and
we're shipping 1.1.28.
(From OE-Core rev: e6c60252ab4ba6842f63c6b8a519a85f2ff238fb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'need' and 'provide' files are there for simpleinit compatability,
according to the comments in these two files.
However, we don't use simpleinit and there's even no simpleinit recipe
in OE. Besides, these two files are not installed.
This patch removes these two unused files.
(From OE-Core rev: 05ac5627208c98007cd4c7aed9d76f179cd974a9)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix indentation in SRC_URI to conform to the indentation convention in OE.
(From OE-Core rev: e05e7016fac7c665a23865dce18b816e01dbd51e)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should fix the case where neon code is emitted for machines
which dont have neon unit in the chip
[YOCTO# 5161]
(From OE-Core rev: 516e6f065a1bed0d95ffd1c8a4d8e135d834af94)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
using update-alternatives to link runlevel from systemctl, as on Fedora 18
(From OE-Core rev: 8909b3b71b2ac792ae092b8f0a6c2ade28f6b73b)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed for the kconfig handling and the merge-config.sh script.
(From OE-Core rev: 1c34b0e871e475a90e27d338469ba31f322d5300)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The iso and hddimg share a common concept of 'live image', and they
use the same initramfs and thus the same init. However, that init
script in initramfs made a wrong assumption that the rootfs image
was read-only by itself. This is apparently not true for hddimg.
To make things work as expected, this init script should at least
distinguish between a read-only rootfs image and a read-write one.
This patch adds this ability to the init script. After this change,
the init script would be able to check whether the rootfs image is
read-only or not. If the rootfs image is read-write, the image will
be mounted and then booted directly. No union mounts will be attempted
in this case.
[YOCTO #5164]
(From OE-Core rev: 29f869b68a9017502f75915784a924f0fe9d4be1)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we enable "ptest", populate_sdk fails with the following error:
# bitbake core-image-minimal -c populate_sdk
..
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies
for dbus-ptest-dev:
* dbus-ptest (= 1.6.10-r0) *
* opkg_install_cmd: Cannot install package dbus-ptest-dev.
Disable that dependency.
(From OE-Core rev: a59b7341d136bf8ee4a22c2968ca95dc17be3947)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So far the rules of check_requirements() is too strict to lead mismatch
when empty lines exist in volatiles.
(From OE-Core rev: 71ab9ee58b0ba5e3f5cbf403d1b8fb79fc7f5ed1)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This script was modified to check whether $ID_FS_TYPE is empty before
automount, however, for cdrom devices on qemu, the ID_FS_TYPE is not
set, yet the device should be mounted. Otherwise, when booting an iso
image with runqemu, the boot process hangs at 'waiting for removable
media'.
This patch fixes this problem by first checking whether the block device
is a cdrom.
[YOCTO #4487]
(From OE-Core rev: 2df21a3b27543df912a3ce05bef2415fae13cb7c)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since meta-environment package name was changed to contain MACHINE,
change packagegroup-cross-canadian package name too, in order to be able
to select the proper environment files for a certain machine.
Also, remove the RPROVIDES since adt-installer doesn't really need it.
[YOCTO #4783]
(From OE-Core rev: d713447dc2fab8900f47c542cfbbb76bad19a7e2)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, the package name contains just the TRANSLATED_TARGET_ARCH.
When compiling the toolchain for two machines, belonging to the same
architecture (for example: qemuarm and beagleboard), this package gets
overwritten and adt-installer repo will contain just one
meta-environment package... This leads to situations like installing the
toolchain for qemuarm and end up with meta-environment package with
beagleboard cpu options.
[YOCTO #4783]
(From OE-Core rev: 09a2b158818e2ec3c3e3b53b6d14fd3527c32c99)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpm macros should be independent of libdir
Fixes errors seen when multilib is turned on
it shows up since then libdir != usr/lib
(From OE-Core rev: 6126c6e4b9c40c222519914c8fe0a51f9eee8d41)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If binfmt_misc was compiled as a module but isn't installed then systemd-binfmt
will put an automounter on /proc/sys/fs/binfmt_misc and when it attempts to
automount (e.g. when df is called) it can't find support for the filesystem, and
throws an error.
As binfmt_misc isn't commonly used, split this helper into it's own package, add
a dependency on kernel-module-binfmt-misc, and ensure the service gets started
when it's installed.
[ YOCTO #4863 ]
(From OE-Core rev: d42f7fc333495dc35227a6d1027492ab70f29b23)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, busybox has CONFIG_FEATURE_SYSLOGD_CFG enabled, but it
doesn't ship a configuration file.
This patch adds a configuration file (/etc/syslog.conf) to the
busybox-syslog package. This configuration file mainly serves as a
placeholder now.
The advantages of this change are:
1. Make the users aware of the fact that the /etc/syslog.conf file
will actually be parsed by busybox's syslogd utility. And configuring
that file will change the logging behaviour.
2. In a systemd based system, this file will prevent the same configuration
file provided by the sysklogd package from messing things up.
[YOCTO #5066]
(From OE-Core rev: b7f6688f0700a1575037362af7a8ca94dccce471)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We will see the following warning by accident:
$ bitbake nativesdk-glib-2.0
WARNING: QA Issue: nativesdk-glib-2.0-dbg: found library in wrong location:
/opt/poky/0.5.5/sysroots/x86_64-pokysdk-linux/usr/share/gdb/auto-load/opt/
poky/0.5.5/sysroots/x86_64-pokysdk-linux/usr/lib/libglib-2.0.so.0.3600.4-gdb.py
There are two '/opt/poky/0.5.5/sysroots' in the path when the warning
comes, this is what we need since glib-2.0 has done this intentionally
in its configure and Makefile.
This is because the configure script uses the:
ABS_GLIB_RUNTIME_LIBDIR = "readlink -f $libdir/$with_runtime_libdir`"
to figure out the abs dir, so if
/opt/poky/0.5.5/sysroots/x86_64-pokysdk-linux/usr/lib/ exists , there
would be warning, otherwise no warning.
We can change the "readlink -f" to "readlink -m" to fix the host
contamination issue.
Another fix could be:
ABS_GLIB_RUNTIME_LIBDIR =""
But this is much more like a workaround.
[YOCTO #5099]
(From OE-Core rev: 3e660ec01cc62c57b379b151e43c7952e97a1c2b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe builds the two utils which are unpackaged.
(From OE-Core rev: a8212a5170940b9ba9ca7a594b65939b06aac86c)
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, the range was 0 to 0. This made it impossible to use
busybox's adduser utility to add a system user. The following error
would appear.
adduser: no uids left
This patch fixes this problem by giving it a reasonable range.
(From OE-Core rev: c4555007d04ccacbc192827b70a97f9a48500a22)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are in the Toolchain list, so they should also be installed on the build appliance
[YOCTO #5061]
(From OE-Core rev: 82374feece5c576f9950bad6861b1e00c6b30d84)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improvements to poky gets in this way
reflected in Build Appliance.
Notable improvements/fixes to bitbake.
New hardware targets.
(From OE-Core rev: ced23e66ad3c255fdccfba24301c99cb60832cff)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.
(From OE-Core rev: a2bab241c64428d5109c3c5ac5de4463fbad70c5)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrate the Midori web browser in Build Appliance. This will allow the
users to get help and file a bug from Hob in Build Appliance.
[YOCTO #3506]
(From OE-Core rev: 18109cf0c71cbd3b77bcf133996774abe4bbccae)
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides a more reasonable log buffer size to avoid losing earlier
events, and 64K is not a problem for modern systems. When the buffer is
used on sysvinit-based systems, which it isn't by default, 64K is already
the runtime default size unless /etc/syslog-startup.conf is modified or
deleted, so this only really affects systems using systemd. This
completely removes the need for the busybox bbappend in meta-oe.
(From OE-Core rev: 6d6a3f805b0fad6f904afb52dc12bfb543e3eec5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed by some recently added automated QA tests so we should add it
to the buildtools tarball.
(From OE-Core rev: 7d93288117e7054472d8a01dde0b38bc0ff98c27)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add new PACKAGE systemd-rpm-macros, this will hold
the macros which are interesting when rpm is used as
package management backend
Forward port uclibc only patches. Add a new patch
to stub out use of preadv/pwritev in testcases
Delete patches that have been merged upstream in systemd
Remove force export of GPERF variable in environment
this was causing AC_CHECK_TOOL to not populate GPERF
variable as expected
systemd needs kmod to be present on rootfs so add it
to RDEPENDS
some services substitute discovered kmod when the service
file is generated during boot, however the discovered kmod
is from native sysroot and it gets into the service file
with absolute path. So specify the target path of kmod using
KMOD variable so the unit files have correct pointer to kmod
on target
Add a patch to make sure that mknod capability is checked
before the service which excercise mknod, this patch is also
submitted to upstream systemd
(From OE-Core rev: 3f1788f8edf18a292cb5d8e16a2a98a19ec89239)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible that /var/lib is on a separate writable partition. In such
situation, we should not bind mount /var/lib with tmpfs, becasue it's
already writable.
This patch fixes this problem by checking whether /var/lib is already
on a writable partition.
[YOCTO #4888]
(From OE-Core rev: 86ac10995fd08226f82d87e23fda5d4898c3190f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Ross Burton
Khem Raj
Randy MacLeod
Cristian Iorga
Phil Blundell
Noor
Laszlo Papp
David Nyström
Chen Qi
Jason Wessel
Roy Li
Saul Wold
Darren Hart
Matthieu Crapet
Krzysztof Sywula
Laurentiu Palcu
Anders Darander
MiLo
Paul Eggleton
Ming Liu
Upgrade Helper
Muhammad Tauqir Ahmad
Alexandra Safta
Chong Lu
Christopher Larson
Tudor Florea
Robert Yang
Mark Hatle
Jackie Huang
Qiang Chen
Hans Beckerus
Florin Sarbu
Dominik Holland
Wenzong Fan
Martin Jansa
Jonathan Liu
Seth Bollinger
Hongxu Jia
Andreas Müller
Tom Rini
Konrad Scherer
Maxin B. John
Michaël Burtin
Chase Maupin
Jeffrey C Honig
Riku Voipio
Muhammad Shakeel
Eric Bénard
Li Zhijian
Nitin A Kamble
Andrea Adami
Mihai Prica
Marko Lindqvist