If the directory specified by --extract-to exists, because we were using
shutil.move() to move the temporary extracted directory to the specified
path, a subdirectory was being created under that directory instead of
moving the contents, which was a different result than if the directory
didn't previously exist. We could try to always move the contents but
that's complicated when any symlinks are involved; the simplest thing is
just to remove the directory (which should be empty anyway) before
moving the temporary directory across in its place.
(From OE-Core rev: 2880bd23b471c1966661b9f05726faf60f9c0e7e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a means of creating recipes for package files or archives that
contain a directory structure to be installed verbatim, for example an
rpm file. (We mostly just re-use bin_package here and skip some of the
normal build system checks.) This support is available in "recipetool
create" and "devtool add" which wraps the former.
(From OE-Core rev: 9e0a6b2e6f16185f8032d36b77d40802bc388987)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The # character in a URI denotes a fragment; we don't care about this
since it is never supposed to be sent to the server, so remove it from
the URI before actually trying to fetch it or use it in SRC_URI within
the recipe.
(This has come up because download links on pypi.python.org seem to have
a fragment containing the md5sum of the download; without stripping this
off the fetcher will choke on it.)
(From OE-Core rev: 58dc726808817210764eab963a4d453dc4ff49aa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The shell considers empty functions to be a syntax error, so for
template shell functions that contain only comments (or no lines at all)
then add a : to act as a no-op which avoids the syntax error.
(From OE-Core rev: ff14d9e5b935b99b2efde479515e54c02ba58f6e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This sub-command creates a bbappend for the specified target and prints the
path to the bbappend. The -w argument, as with some of the other recipetool
commands, will make a version-independent bbappend.
Example usage: recipetool newappend meta-mylayer virtual/kernel
[YOCTO #7964]
(From OE-Core rev: ac053163c7823e482ca1af2962342e64a54bfb52)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So far all devtool and recipetool plugins were expected
to have plugin_init function. This function is empty in
most of plugins as they don't require initialisation.
Making plugin_init optional would allow not having empty
plugin_init in every plugin.
(From OE-Core rev: b99640c89f067866b264f4ee4030fae4c2f338c0)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will now also be used by "devtool upgrade".
(From OE-Core rev: 0d0b8425eaf74a6d7f3d9f6471e6edca1a273c06)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the function more reusable for other sub-commands.
(From OE-Core rev: c6feb6e97c9929560b1e3cec280c1d7976ecc030)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When determining the path from WORKDIR to the extracted sources, we're using
S, but if S is in work-shared, that's problematic and won't give us good
results, so assume 'git' for that case, warning when appropriate.
(From OE-Core rev: dc70cf470f18c97b6762cbf7aca723769b47bc7d)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-d is already taken for --debug.
(From OE-Core rev: fc174debb073c99a0cabf4f00e66ab36c7e93989)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have multilib enabled, it finds lib32-base-files instead of
base-files for test_recipetool_appendfile_basic causing a test
failure. Add a fix for this.
(From OE-Core rev: c9821a56da9c6e341408ea21e0d8a4cc5291dba6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the `appendsrcfile` and `appendsrcfiles` sub-commands, which let the
user add or replace one or more files in the recipe sources, either in a path
relative to `S` or `WORKDIR`. Each file gets added to `SRC_URI` as a file://
URI, using the subdir= parameter to specify the destination directory.
Examples:
# Adds our defconfig as file://defconfig. If it's already in SRC_URI, it
# won't be duplicated.
recipetool appendsrcfile --workdir meta-mylayer linux-mel defconfig
recipetool appendsrcfiles --workdir meta-mylayer linux-mel defconfig
# Does the same, handling the different local filename
recipetool appendsrcfile --workdir meta-mylayer linux-mel defconfig.mine defconfig
# Adds our device tree files to the source tree
recipetool appendsrcfiles --destdir arch/arm/boot/dts meta-mylayer linux-mel *.dts
Of course, for the latter example to be of use, the new dts files would need
to be added to `KERNEL_DEVICETREE` as well, and depending on the kernel,
`DEFCONFIG` or `KERNEL_DEFCONFIG` may need to be set.
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
(From OE-Core rev: 8227172d05fb394d79ff83d3c36f5208ebebf92c)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This validates the arguments early, when argparse is parsing the arguments, in
a consistent way.
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
(From OE-Core rev: bec92899f5324a4423b4ee70365eaa5dfb6891a6)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* It turns out that not all versions of the file command support the -E
option - the version in Ubuntu 14.04 doesn't support it for example.
This option is supposed to force file to return an error if the file
can't be opened - since we can't rely upon it then fall back to
looking at the output instead. (The results of this issue were simply
that we didn't notice if the file was executable and give a warning,
which tripped an oe-selftest failure - so it was minor.)
* If we receive an error there's not much point looking at the output to
see what type was returned because there wasn't one.
(From OE-Core rev: 7bf9dccef1aa626adc9c45addcd066fed69cace9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a long description and tweak some of the argument descriptions so
that it's clearer what the appendfile subcommand does and how it works.
(From OE-Core rev: a0a595307d28d0350c3752293ab8ebf499ee416f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Locating which recipe provides a file in an image that you want to
modify and then figuring out how to bbappend the recipe in order to
replace it can be a tedious process. Thus, add a new appendfile
subcommand to recipetool, providing the ability to create a bbappend
file to add/replace any file in the target system. Without the -r
option, it will search for the recipe packaging the specified file
(using pkgdata from previously built recipes). The bbappend will be
created at the appropriate path within the specified layer directory
(which may or may not be in your bblayers.conf) or if one already exists
it will be updated appropriately.
Fairly extensive oe-selftest tests are also provided.
Implements [YOCTO #6447].
(From OE-Core rev: dd2aa93b3c13d2c6464ef0fda59620c7dba450bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provide a means to set SRCREV immediately by using rev= in the URI; if
it is specified then it is removed before setting SRC_URI and SRCREV is
set to the same value instead.
(From OE-Core rev: c9304fcb0a2b81700d0ed5c13b4d976bd4230ce3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Recipes that fetch from git, svn or hg by OpenEmbedded convention
should normally be named with this as a suffix, since PV is meant to
be set appropriately within the recipe, so follow this. In order to
make this work we need to be able to have the version independent from
the file name, so add a -V option to recipetool create to allow this
to be specified.
* If -V is specified on the devtool add command line, ensure at PV gets
set to include this version.
(From OE-Core rev: 2b997c41c6476a13bf516586d56a9051aceb93ec)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If -x is specified and the specified URI was a git repository, we need
to ensure that the resulting clone is a sandalone and not one that has
pointers into the temporary fetch location or DL_DIR (since the git
fetcher does a local clone with -s). Split out the code from devtool
that already does this for "devtool modify -x" and reuse that.
(From OE-Core rev: fc47e8652ef32e7399f57c80593df90dc52d8b84)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When -x was specified, we were getting the normal unpack subdirectory
which we don't really want - if there's only one subdirectory unpacked
then we should effectively copy just it to the extraction path, not as a
subdirectory under it.
(From OE-Core rev: 0eeecce96a0aa757c2c4c4ac4d82e3bcbf0f982c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a license file matched more than one of the specifications (e.g.
COPYING.GPL) then it was being added to LIC_FILES_CHKSUM more than once.
(From OE-Core rev: 58316a2890782d206e9b9472ba483367f7560109)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Option was renamed in the setup code but not in the code that used it.
(From OE-Core rev: 4b4f2d4f2869d6d5d564cc1b2d733f41ab5a3b9b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Based on feedback from Scott Rifenbark <scott.m.rifenbark@intel.com>
(From OE-Core rev: 2c59b2b20c32577085645056e4cbf4f9c259e4d7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a versioned recipe filename is specified, replace the version in the
value of S with ${PV} just as we do with SRC_URI to make future upgrades
of the recipe easier.
(From OE-Core rev: 0b3c81ed5bcce9b608c4f804496d769288fe8c04)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This uses a standalone python script named `pythondeps` which now lives in
scripts. It supports scanning for provided packages and imported
modules/packages, the latter via the python ast. It's not perfect, and
obviously conditional imports and try/except import blocks are handled
naively, listing all the imports even if they aren't all used at once, but it
gives the user a solid starting point for the recipe.
Currently `python_dir` from setup.py isn't being handled in an ideal way. This
is easily seen when testing the python-async package. There, the root of the
project is the async package, so the root has __init__.py and friends, and the
python provides scanning currently just assumes the basedir of that dir is the
package name in this case, which is not correct. Forthcoming patches will
resolve this.
(From OE-Core rev: cb093aca3b78f130dc7da820a8710342a12d1231)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a more maintainable and flexible script for creating at least the
skeleton of a recipe based on an examination of the source tree.
Commands can be added and the creation process can be extended through
plugins.
[YOCTO #6406]
(From OE-Core rev: fa07ada1cd0750f9aa6bcc31f8236205edf6b4ed)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Christopher Larson
Ed Bartosh
Christopher Larson
Richard Purdie