Changes to support a new chapter on the 51 tasks that the
OpenEmbedded build system defines. The changes include a new
file called ref-tasks.xml, changes to the ref-manual.xml
building file to include the new chapter, and a new bullet
item to the list that describes what is in the reference
manual.
(From yocto-docs rev: a816746051ec025014e515fb848b3e0e58d4c7be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From yocto-docs rev: b8e7dee82929213e7581d6c598f42da74ee03988)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new section on "Matching Branch Requirement for Git Fetching"
into the BitBake section. Plus, made some minor corrections to
some of the 1.5 sections.
(From yocto-docs rev: 326a8009ca0bef0a4686510bb521010d8f58ac81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
I pulled the change I put in to warn users about forked packages
based on further review from Paul Eggleton. This pretty much
means the bug is back to square one.
(From yocto-docs rev: fec630e4d1c464865d85e824ec684ef3cee55b42)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The package architecture for armv7a packages with the thumb optimization
enabled will now get a "t2" suffix as it should; this was not the case in the
1.5 release. Architecture names will change within package feeds as a result.
(From yocto-docs rev: 1ce59f6911dd67835266aa3b0e29f404a487fd6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I get this list from meta-yocto/conf/distro/poky.conf.
(From yocto-docs rev: 796d4eced50d14203f1a791ff557a4016f4dd031)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set the release date to April 2014.
(From yocto-docs rev: 2592bc968edeea941a92e6bdd321dd872745b78c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I ordered these 39 tests by alphebetical ordering.
(From yocto-docs rev: 3a7ef1c149ee1f8f0ac4709e906f5c84ed7ab642)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5159]
Edits to fix the occurrences of VIRTUAL-RUNTIME_initscripts = "".
I removed it from all places in the manuals except under
"Selecting an Initialization Manager". Note that it still
needed removed from "Using Systemd for the Main Image and
Using SysVinit for the Rescue Image".
Also, in the "Using Systemd Exclusively" section I made some
edits as suggested by Paul Eggleton's review.
(From yocto-docs rev: 28b2e3eba3acff17f165899a7f4a65c98263e201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Applied edits to the section in the dev-manual on running tests
on hardware.
Edited the TEST_TARGET and TEST_IMAGE variables.
(From yocto-docs rev: a26ba11c739aabab4009a944d9b622e2814c7fca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 5766]
I removed the note about the "live" IMAGE_TYPES. Turns out I
was wrong on this information. It does not create a "directdisk"
image. That is accomplished through a .bbclass.
(From yocto-docs rev: a3b762be9933178e9cecdac3fa9e110c031a64d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
Added a bullet item to the packages section in the migration chapter
for upgrading to YP v1.6. Item notes the issue and warns the
user to beware.
(From yocto-docs rev: f66ca39a65c2529ebc552d3a816e6565dae183f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6125]
Did some re-writing based on Jonathin Liu's feedback.
(From yocto-docs rev: bee4a584bcb1e70e9848324781c32d1d9e3d1fc2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5554]
Removed the note limiting this to QEMU tests.
(From yocto-docs rev: c91d058514832aacfb74fd4480e0a2dba95b4921)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor re-wording edits as suggested by Paul Eggleton.
(From yocto-docs rev: 699eec0b691a19b4ae2f05c7774f559898e952da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4961]
Documented the user requirement to use PACKAGE_INSTALL to specify
packages for installation into an initramfs image. Normally,
you use IMAGE_INSTALL. To account for this user model, I updated
the PACKAGE_INSTALL and IMAGE_INSTALL variables. I also added
a bit more information to the "Images" chapter item that
talks about the core-image-minimal-initramfs image.
(From yocto-docs rev: a1ad649cf310f281a7de584d5b9a1820ca99d4eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Applied some feedback to the variables based on Paul's comments.
Needed a caveat on how you can use these variables.
(From yocto-docs rev: ef8fac4b36089d3162ee16c93866a39bcd31701c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5888]
Two new variables added to the glossary. These help with
specifying kernel modules that need to auto-load on boot and
with specifying module.d syntax in the modname.conf file.
(From yocto-docs rev: 1ac544c4f6129faafea10691b426cd510ff56a69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced the v3.4 version example with the v3.10 version.
It is more up-to-date.
(From yocto-docs rev: 2e7f5d4fbe24a8248686c9ca7cf870204966beec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied this patch from Dennis and then removed some whitespace,
used the 5-space indentation convention for the literal, formatted
the task name and did some other minor fixes.
(From yocto-docs rev: 477a9ecb2f91681ee401478189a424793381bfcb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some review edits to change the useradd-staticids class and the
related USERADD* variables. Input from Paul Eggleton.
(From yocto-docs rev: 9b94046721a971de41d2062a48d624e06dcf17f0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the new useradd-staticids class to the reference section
for classes.
Updated the USERADD_UID_TABLES and USERADD_GID_TABLES variables
to tell how the system uses BBPATH in the default mode to
get UID and GID information from the files/passwd and files/group
files.
Added a note indicating that you can delete the TMPDIR directory
to fix things up if you configure useradd-staticids in a
configured system.
(From yocto-docs rev: a3f5ee3f5060369405d59a238fb02bddfeae5d6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2444]
Several areas affected by the reference BSP "beagleboard"
being replaced by "beaglebone".
(From yocto-docs rev: 2f02b570e1ebcf0469871b67a029b65fa8b285f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #605]
I added an example showing what the user would need to do in order
to build an ISO file. This seemed to be the best existing place
in the YP docs to get this information in.
(From yocto-docs rev: a715c28e533f723e0c2d4ab4d33b86b93fa2d66b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found some poor writing in this description.
(From yocto-docs rev: f54810d68a5efb25c102cd99a7e2b9cfcf7ad7de)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review comments from Paul Eggleton to the section on
migrating to the 1.6 version of YP.
(From yocto-docs rev: ffd224a16cef4d643cc2c527ad8dc5e15d715faa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The set of archive* classes has been removed leaving only the
archiver.bbclass.
(From yocto-docs rev: 1660896b47ff5d21ae73d383505063f1c7c1a3b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the referencing to adjust to the emergence of the
archiver.bbclass and disappearance of the archive* classes.
(From yocto-docs rev: 903e9b7c534e65e1be3eb0dc57378e120c7a0e3e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out that the user does not set these variables.
(From yocto-docs rev: b016906dad7e3d7856935e83e5c9b09cfa399caa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Otavio Salvador
Dennis Meier