Fixes [YOCTO #5408]
Added a cross-reference link for this variable into the glossary.
(From yocto-docs rev: a6f4935b60222a97a5fe03a538a3f8042e18d3f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5408]
The developer's manual should only refer to functionality which
is available in oe-core. Currently, this passage requires the
user to add a package from, and use facilities of, meta-oe. This
fix describes how to use facilities in oe-core to the same end.
(From yocto-docs rev: 2dfaa88ae4760f86dbbdc8b58de7feba25a8014a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5203]
This was reviewed by Alex and an ordering change was needed due
to the order of how things are created during the workflow.
(From yocto-docs rev: 0c630fed9f9a609c1ca13359efe47cad6f60e00b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix for [YOCTO #4414]
I put in the API stuff as well as made sure the other comments
for the dora-toaster branch and temporariness of the GUI were
mentioned. Probably more tweaks before this section settles
out.
(From yocto-docs rev: 4df966bb21a014b8fcac69abb7b912e109089606)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix for [YOCTO #4414]
Got some feedback on the section and added a step that the user
needs to checkout the dora-toaster branch after clonine poky.
Also, that the Django version is specific and not the listed
version +. Finally, a bit of wording to note that the GUI is
temporary for this release.
(From yocto-docs rev: 775d55f33a4dfbb21db896b81159e16ee7e16034)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-yocto-bsp/conf/layer.conf example had gone stale.
I updated it.
(From yocto-docs rev: bf77d70789f85400e2d6be7e4e32475506183217)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This site has disappeared and I don't think there is a
replacement.
(From yocto-docs rev: 711488b664e1da7f3a4c64af3fbd4012bfb44d56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix for [YOCTO #5368]
Updated the figure to not have the tarball method in there
for setting up poky repo locally. Also, added specific references
to the environment setup scripts.
(From yocto-docs rev: 7c6ececaf8eb987206567077f42213dbe4cdc4f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial fix to [YOCTO #5368]
I updated the workflow so that it does not have the tarball
extraction option to set up local copies of poky and meta-intel.
The figure is housed in dev-manual and mega-manual.
(From yocto-docs rev: d70214d7d348d38b574561339987bd3371167a48)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
Partial fix to the tarball removal issue. I rewrote parts of
this term's definition to slightly de-emphasize tarball expansion
as a method to set up the Source Directory on the local machine.
(From yocto-docs rev: 2fb1e569129e9942ca4a99fe7f73de02ccbd1876)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
This is a partial fix to the removing tarball setup method issue.
I have modified the "Yocto Project source Repositories" section to
de-emphasize the tarball installation method for poky and meta-intel.
We cannot remove these obviously because the download page of the
website gives the use access to tarballs. Also, the Index of
Releases basically does the same thing. So, we can't ignore the
fact that they are there. So, I added a note basically saying we
recommend the Git method for creation of poky and meta-intel on the
development system.
(From yocto-docs rev: 7843ea5e592582f74a02536ec4057067c43eb507)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
Partial fix for this issue, which is removal of the tarball install
methods for poky and now evidently meta-intel. This commit removed
the tarball install step for meta-intel in the "Supported Board
Support Packages (BSPs):" bullet item in the getting setup section.
(From yocto-docs rev: 98f13d8178a63258e2b80d78796e473d09abb452)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
Partial fix for the bug. This part removed the tarball install
method from the getting setup section of the second chapter. I
did some rewriting to smooth it out.
(From yocto-docs rev: b051433e34e0f3a46deba0b2b4815ab77fde62c8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4414]
Some changes to the toaster section according to the updated
toaster wike site and Belen.
(From yocto-docs rev: 1e66b4d377c21fae179826dab5ceb75b9aea1a1b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5368]
Changes partially address this issue, which is the removal of
tarball installations for poky. The notes at the beginning of
the YP manuals suggested that the tarball version of a manual
might lag the version found on the website. Because we are
discouraging installing poky/documentation from a tarball now,
I have re-written the note to be generic and suggest simply that
for the most recent version of the manual associated with the
release, see the manual on the website.
(From yocto-docs rev: a5e96e7eb719e69bbcf2139af2e20230aedc4247)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the '-ptest' complementary package to the list of packages,
which included '-dev' and '-dbg' when using inherit packagegroup.
Robert P. J. Day pointed out the code in the OE packagegroup.bbclass
class that showed these three packages all together.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 823555ac44958995426cc631d992b9d276c42ca4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the comments for the section that describes how the
Toaster works with a GUI. I also commented out the smaller
section that was used in place of the GUI section before it
was fully functional.
(From yocto-docs rev: 9c82007f23c83806d9c3748369b61426196b748f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated all six tables for both 1.5.1 and 1.6 releases. Both
entries need to ultimately be in the 1.6 version of the
manuals.
(From yocto-docs rev: ac1d2cc5686da142562cd674f7fa8908895a27df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5203]
Adding a BB Commander project location that is the same as your
Eclipse workspace causes an error. I have added a note warning
the user to not do this.
(From yocto-docs rev: 0eca6618be8e4765b8513fb5951257ec17cdd355)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some minor edits to this section for better wording.
(From yocto-docs rev: 614bbc24272461db6a1534334dae7b758001211d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The actual file listings for the formfactor_0.0.bb and
formfactor_0.0.bbappend files had changed. I updated the listings
to match the actual files with the release.
(From yocto-docs rev: a7a610223a5ce98d806e99474764381ca9752775)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied some capital letters to a bullet item for consistency.
(From yocto-docs rev: ee24d04512e9a211499e546b06e5121ee968f88f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Figure changed do to how they store images now. Figure needed
a new level in it.
(From yocto-docs rev: a7d9484cc1cbba37231e5238c92cb22099345ec9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a couple broken links. Also, noticed the yp-download figure
was out of date. Especially in the Figures folder of the mega-manual.
(From yocto-docs rev: 2e55faca221186d157dd5f77d048f1b2b90d5d91)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor read-through edits.
(From yocto-docs rev: 8a2df890390dc6d64f364c0f4c294cc0742e3f43)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the prompt to be "#" rather than "$", which is a
convention for running commands at a different level according
to Trevor Woerner.
(From yocto-docs rev: b8eebdf4738c8655db724498a2293a44cae331dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes modify the patch sent by Trevor that essentially
re-wrote this section. My edits were for consistency only and
style of the book. No technical information or flow was altered.
I did rename the section to be active to match the other package
related sections. This caused the link in the ref-manual in the
classes chapter to have to be updated.
(From yocto-docs rev: eb2f950786574b1e90adc673ef00f52a70db9be6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trevor Woerner's patch as submitted with no alterations.
This patch rewrites the entire section on setting up
runtime package management. The section will need to be edited
but that will be a separate exercise. This commit captures
the raw patch.
Note: one external link in the doc set broken after application
of the patch because a "section id" tag was changed by the
patch. I am leaving that fix to a separate commit.
(From yocto-docs rev: 4de8df9c9da2e43b5125d1c52889d4408870a4d7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed the release month of October in for the 1.5 release.
(From yocto-docs rev: c0431b2b3115d9687dcb5d3ba37adf6bf4695867)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied review changes to the following variables:
IMAGE_NAME
DATETIME
SDK_ARCH
IMAGE_BASENAME
TUNE_PKGARCH
PACKAGE_GROUP
COMPLEMENTARY_GLOB
BUSYBOX_SPLIT_SUID
Also, reformatted some 1.5 package version requirements into a
list rather than a lazy literallayout tag.
Provided some new wording for the "Directory Layout Changes"
section in the Migration chapter.
(From yocto-docs rev: 60c3a905dd9212f1b4f6969341640a0726342d11)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton sent me corrected procedure. I implemented his
changes.
(From yocto-docs rev: 581778c52493b662f449bbbed36453f161501c18)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a step on making sure they have Oracle JDK in there
to the section that builds the plugin. Also, removed the
third method to install the plugin.
(From yocto-docs rev: cfd2b88717a709049155a8ff15134b617fc6e172)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a link to the "Toaster" page at the end of this short section
to point to the section on "Installation and Running" Toaster.
(From yocto-docs rev: 3d50425487f68960e50670601b7a38e6fc3a15ad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied a second round of review edits from Paul Eggleton
for the new "Performing Automated Runtime Testing" section.
I did some reorganization and some minor wording changes.
(From yocto-docs rev: fa8f8e5f0f6c1377a4fcafcd3d933af15ac01ff3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YP 1.5 default kernel is 3.10. This is a change from 3.8 in
the previous release. This change affected several areas of
the documentation.
1. The BSP Guide had a crownbay BSP structure that did not
account for the new default.
2. The yocto-bsp tool output still asked for the 3.8 kernel
as the default.
3. The recipes-bsp section had 3.8 used and had some bad
listings that had to be changed.
4. The recipes-graphics section had 3.8 used and also had some
stuff supporting two versions of the graphics (emgd and
noemgd). I had to pull the emgd stuff.
5. There were miscellaneous spots in the dev-manual that were
referencing 3.8 as the default kernel. Particularly the
list that shows what kernel repositories we have. That needed
updating.
(From yocto-docs rev: 9826ce760884f2ce5a4eb72c6a731a85cd6f2b2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section and variables for performing automated runtime tests
on images was reviewed by Paul Eggleton. The suggested changes
were made.
(From yocto-docs rev: c2f84ea3c162892e4da3df30fb833f88bab3d3cc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new section called "Running and Writing Tests for a
QEMU Image" to the "Common Tasks" chapter. This information is
based on Stefan Stanacar's wiki page information. The section
provides the same information as the wiki sans the log files.
(From yocto-docs rev: ca2294821e34bbcd0afe7dd27421e8c6a828d700)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First pass at changes to support Eclipse Kepler 4.3 release.
(From yocto-docs rev: 265bc3f4ae3442b2fd0490d0f4558c7a584cb31c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I went through the "Working Within Eclipse" section and set up
structure to add in the Kepler support and drop the Indigo
support. Along the way, I formatted the entire section to
hit within the 40-character limit exclusive of the links,
which always overrun.
(From yocto-docs rev: 762291589382f7ef71e77f8c92dae2371f3ae6e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed all these occurrances throughout the manual set so
they are consistent. The only ones left are now in pathnames
or UI things where they need to stay that way.
(From yocto-docs rev: 1b77f34b7b6983f7d7e680cd9fd6a714c00ba8f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5037]
The information to fix this bug was very similar to some
"best practices" and "recommendations" information that was
currently buried in a section that described how to create a
layer. So, since the new information for this bug fix increased
the amount of information significantly, I have pulled out the
existing "recommendations" and "best practices" information and
combined it with this new information and placed it in its
own section dedicated to just that. The information still
resides in the main section that introduces and discusses
layers and their creation.
This is a first draft of the section. It is under review.
(From yocto-docs rev: 066de04511afb0641278f3fda4e97718b3ed5c47)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4730]
The web interface for Toaster was cut from the 1.5 release.
I have commented out the existing section and replaced it with
a short introductory section for the API only.
(From yocto-docs rev: 7864e6d9958a9e582f5035f28afb063ef584396a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Trevor Woerner