Updating the meta SRCREVs to pickup the following meta change for the
3.0 and 3.2 kernels:
[
meta: Clean up BSPs kernel config
Clean up some QEMU and non-x86 BSPs kernel config, including
qemuarm
qemuppc
qemux86
beagleboard
mpc8315e_rdb
Only obsolete/invalid kernel configs are removed.
(From OE-Core rev: 1f68d624c109c3f31a6f2f6106b5ef56e3d9a166)
Signed-off-by: Yang Shi <yang.shi@windriver.com>
]
With this commit, the configuration audit for the qemu and hardware
reference boards is (largely) warning free.
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV for both the 3.0 and 3.2 kernel trees to
pickup the beagleboard xM boot fix:
[
meta/beagleboard: disable CONFIG_PREEMPT
The boot hangs with the message:
mmc0: error -110 whilst initialising SD card
The MMC driver has issues initializing when PREEMPT is enabled (either forced
or voluntary). Unplugging and then plugging the card back will reset the
driver and continue booting. Alternatively, disable preemption.
]
[YOCTO: #1892]
(From OE-Core rev: 36e9e6a88bc4436efefd4a25c0a58be75f887142)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In fixing an existing patch migration bug, the list of valid extensions
got out of sync from the core patch class. As a result, valid patches
were not being applied to the tree.
Updating the tools to migrate .diff files fixes the issue.
Also in this fix is the removal of .patch in the find_sccs() routine, since
it will never be returned by patch.bbclass when all non-patches are
requested, it is simply confusing.
(From OE-Core rev: 0ade3f26f40b67d7296725b1e956c46be9a86089)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows systemtap-uprobes to build again after the recently
added patch broke the builds.
(From OE-Core rev: 4bbe926f3ca68297d70849bab67177da624316d1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building the systemtap documentation adds significantly to the build
time, so disable it by default.
(From OE-Core rev: e37391a949fb0a6edf87eb910e93a17caf309119)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building docs in systemtap, docproc is used to generate the
tapset documentation, but it gets built for the target, while it needs
to be build for the host instead. This change causes that to happen.
Fixes [YOCTO #2193].
(From OE-Core rev: 6ef7112e339bb5c03dee862bc56c10fdf677be78)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During testing/extension of the linux-yocto-tiny kernel it was found that
defconfigs were not always properly applied. This was due to two issues:
- not being able to fully control the order of objects applied to the
git tree on the SRC_URI
- defconfigs triggering --allnoconfig before being applied
To fix this, the recipe space code that previously detected and generated
automatic features moves back to the kernel tools (where it was before) and
is updated to also process .cfg and defconfigs. Moving this back to the
tools allow other recipes to automatically benefit from the additional
support.
The second issue is addressed by allowing configme to take --alldefconfig
when a recipe wishes to pass a defconfig and override the default
behaviour.
Fixes [YOCTO: 2250]
(From OE-Core rev: 08c368b9980716e459d846dd7183940a5bf8bea4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.2 recipe SRCREVs to pickup the following meta change:
[
meta: Add igb.scc to Romley
Romley machine has 82580 Giga bit Ethernet Controller.
Add the relavent Nic driver to it.
(From OE-Core rev: d7c567816bf828da34fb9e315d4d76c4181337e9)
Signed-off-by: Kishore Bodke <kishore.k.bodke@intel.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dtb files were not being installed into a location compatible with sstate and
the do_deploy task. This means in builds just using sstate, the dtb files disappeared.
This patch fixes the code to use the correct location for deploy files.
[YOCTO #2190]
(From OE-Core rev: 9815b7a95ac33d3234073cdd204d9389b4241189)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1501]
hello-mod is an example kernel module, and does not provide any real
functionality. As such, it would be better placed under meta-skeleton than
meta.
(From OE-Core rev: bde1744018afd4616e114b20ffdc21b9abddcedc)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recent Linux kernel tries to load the libertas firmware with the version
string in its name first. This results in a delayed firmware load on
system boot. Keep the default libertas firmware name and add a link for
older driver versions.
(From OE-Core rev: baa1323dfff35ccd5aebc036ca97925a1f1a604e)
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Migrate linux-yocto-tiny from 3.0 to 3.2. The 3.0 recipe was
based entirely on recipe-space fragments and was only a proof of concept.
The 3.2 linux-yocto meta-data now has a proper tiny KTYPE defined.
By default this recipe supports only the qemux86 machine, which builds the
common-pc support (including networking, sound, USB, VGA and serial consoles,
etc.). New machines can be added and will use the tiny KTYPE, but will need to
add any desired hardware support as the base config is very minimal.
No filesystems are supported by default, only the initramfs.
(From OE-Core rev: 44c556f5300b1d811a1ae71f501320d1a6b0fb2e)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the META SRCREV to pickup these commits:
59f350e meta: Add common-pc-tiny.scc
0996ca9 tiny: Minimize the tiny config
d6b57bb meta: common-pc add dependencies to cfg
Which update the configuration for the tiny profile of the kernel
for the 3.2 release.
cc: Darren Hart <dvhart@linux.intel.com>
(From OE-Core rev: df3b8f716cc9203251cd4d4b5e673d7ecab5111b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to pick up this commit:
[
common-pc: Add PCNET32 to the config
Qemu and VM Ware both support PCNET32 and the latter requires it for
32 bit images.
(From OE-Core rev: 6b431f1a09abde57d03b799e57186afb9a572387)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>5A
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* show warning for old /etc/modutils/* files without .conf extension
* v2: keep adding modules also from old /etc/modutils/* after showing
warning, this way update-modules will be backward compatible also on
images without kernel upgrade
(From OE-Core rev: 38302a1353cf072b7c6c54f7f90936e4c2180102)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The linux-libc-headers-yocto is not required in oe-core, it can be
moved to yocto specific layers. The linux-libc-headers_* recipes
provide sufficient headers fore core users.
(From OE-Core rev: 6320041fa77514e2d2bf54f0ea6c7052d2a4a89a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 3.1 kernel was never released or directly supported via
oe-core. So as part of update the libc-headers to 3.2 we can
take the opportunity to remove it.
Built and booted on the qemu* targets.
(From OE-Core rev: ce7469ab3b49f8a326ba4c3486a4e63b7cd48799)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the recipe name lttng-ust from lttng-2.0 to lttng2-ust so that
that both the lttng-ust of the old framework and of the new framework
lttng-2.0 can coexist.
Fixed bug [YOCTO #2062].
(From OE-Core rev: 0d9fc8185945328837aa1a3d9d705afa56856853)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update blktrace to reflect the newer 1.0.5 tag.
(From OE-Core rev: c981fa4fad8a457882293157b7bdca05aad5a778)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recent -stable kernels have their own fallback definition of is_compat_task
#define is_compat_task() (0)
To protect against this double definition of is_compat_task we can check
to see if it is already defined, and skip the lttng variant.
(From OE-Core rev: 53db58982b7af59d75fc11b73475e9d71e6927ac)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta and machine branches to the latest 3.0 -stable
release.
To see the full changelog: git log v3.0.23..v3.0.24
(From OE-Core rev: 7ed5780cbae6b60adeb56d4d3deb0b82c2dfec70)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.2 meta and board branches to the latest 3.2-stable
update.
(From OE-Core rev: 5de1757cc139565b02c6c56b4aa78a2401b42aa9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the meta SRCREV to pickup the following change
fri2: Update fri2.cfg for hardware specific support
The FRI2 does not require R8169 or PATA support. It does not need SFF
or GENERIC ATA options either.
The FRI2 does require IEEE802154 (Zigbee), BT (Bluetooth), and IWLWIFI.
The latter is compiled as a module to avoid the need for an initrd
containing the firmware blobs.
(From OE-Core rev: 97c21129819ee7a3091757879cd2f0b8133f12e7)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the meta branch for two changes:
cac43c1 fri2: Update fri2.cfg for hardware specific support
892bd13 meta: Create scc file for pvr merge
(From OE-Core rev: 8d1ed5e42358bd33442a6038a9f3931c827bdf94)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The packaging changes to ncurses could break package feeds,
so bump the PR on everythong that DEPENDS on ncurses.
(From OE-Core rev: be92256917c157284ef8370bb93bbf443849b2e1)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel configuration requires lzma to compress the kernel image
(CONFIG_KERNEL_LZMA=y), so add a dependency on xz-native which provides
it.
Fixes [YOCTO #1728].
(From OE-Core rev: e1f656492475fb65d1203afe0afeeec7e279a317)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The previous copy command preserved the original
owner and permission bits.
* The new command uses root:root and applies OE's
umask.
(From OE-Core rev: 710e565beadcf4ea965af688fd08b9b1f274ad57)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Adding "GPLv2 & LGPLv2.1" to create a dual license to cover the libraries.
* Bump up PR
(From OE-Core rev: 468aab48b07d345aadb6f449421824b0447d29c2)
Signed-off-by: Jeff Lance <j-lance1@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the -rt kernel to pickup the incremental update to -rt16.
No major changes from -rt15, except for a bug fix that we want
to pick up.
(From OE-Core rev: 0b03c2382ad6b2d472555f5054a1ce82eb4e3de9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to pickup the following fixes:
a9ffedb meta/fri2/sys940x: fix incorrect cfg includes
3d1a678 meta/sys940x: fix incorrect emgd branch merge
During the merge of the 3.0 BSPs forward to 3.2, a few moved config
fragments were missed.
(From OE-Core rev: 51c0c1d07d44b3bffb63d15b6befff6e7ba2549f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is an update of the linux-yocto 3.0 and 3.2 SRCREVs to bring
in the following updates:
- v3.0.23 stable update
- v3.2.9 stable update
- 3.0/3.2: fri2 updates (pch + configuration changes) from Darren Hart
- 3.0: pvr merge from Kishore Bodke
- linux-yocto/rt: update to 3.0.23-rt38
- linux-yocto/rt: update to 3.2.9-rt15
These have been built for all qemu targets, and built for the appropriate
hardware platforms.
(From OE-Core rev: a9e7131b85e1787e6f76c64d77b2ac6684c8a9c9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of specifying nocheckout=1, it provides a better workflow if
the linux-yocto recipes use the new bareclone=1 option to get a mirrored
copy of the source repository. This allows all local and remote branches
to be available during the kernel build and development cycle.
(From OE-Core rev: 2281e14a342639bfd2656ffa220dc023168cb35e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using "1" with getVar is bad coding style and "True" is preferred.
This patch is a sed over the meta directory of the form:
sed \
-e 's:\(\.getVar([^,()]*, \)1 *):\1True):g' \
-e 's:\(\.getVarFlag([^,()]*, [^,()]*, \)1 *):\1True):g' \
-i `grep -ril getVar *`
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
3.2.8 was released and contains a floating point fix for x86 32
bit and some x86-64 fixes. So it's worth picking up right away.
(From OE-Core rev: 8bd3038b62eaf46f9ac09fcdc1ca5e6f6e53a126)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.0 and 3.2 kernel SRCREVS to make the PVR feature
description available to machines with the appropriate hardware.
(From OE-Core rev: 0027bb45a40d209f43088e2c2b38191446ea1190)
Signed-off-by: Kishore Bodke <kishore.k.bodke@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Making two changes for BSPs that prefer linux-libc-headers-yocto:
- bumping to v3.2.8 headers
- stubbing out unecessary linux-yocto functions when headers
are being built
[YOCTO #2032]
Acked-by: Darren Hart <dvhart@linux.intel.com>
(From OE-Core rev: 0889f693916bb8f77003af419f71212201b4d9c9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.2 kernel recipe to the latest -stable release.
(From OE-Core rev: 97d55a32c7bb7650af59a5bce49cf8409a875f98)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bumping the revision of the 3.0 kernel to the latest -stable release.
(From OE-Core rev: b91c32360469ce97fc00e807e7c3415fed1848a5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* We have various variables which are either not quoted at all or are half
quoted. This patch fixes the bad exmaples so everything is consistent.
(From OE-Core rev: 960ee8076e860353a05eb2eb7f825a455c54698d)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating meta for the following change:
[
fri2: use emgd-1.10
Use the yocto/emgd-1.10 branch in place of yocto/emgd.
]
(From OE-Core rev: aa6293ffbc7f8f17e55f2105de56384e14591b44)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To adapt to different branch names in a repository, removing explicit
references to 'yocto' in automatically created BSPs ensures that they
are consistent with the merged variants. Existing BSPs and auto BSPs
are not impacted by this change.
(From OE-Core rev: 74613d02aa844cac3be0626cc64139643fe17a4f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREC to pickup the following changes:
70e86dc meta/rt: update rt patch cache
Without this change a 3.0 based -rt build will fail to patch.
(From OE-Core rev: e5da5e84e64362f59a62f65b9f260f96af96bc11)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to pickup the following changes:
[
Author: Darren Hart <dvhart@linux.intel.com>
Date: Wed Feb 1 09:37:48 2012 -0800
Remove boot-live cfg duplication from BSPs
Several BSPs duplicated the boot-live fragment in their BSP
specific config. Remove the duplication and add CONFIG_RD_GZIP
and CONFIG_BLK_DEV_SR to the boot-live fragment.
(From OE-Core rev: a243dded5c84d48728308a769e527302b7539939)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Tom Zanussi <tzanussi@intel.com>
Author: Darren Hart <dvhart@linux.intel.com>
Date: Tue Jan 31 13:18:17 2012 -0800
meta: sys940x BSP meta data
The Inforce SYS940x-ECX Developer-Ready Reference Platform features:
o Intel Atom E6xx (0.6-1.6 GHz)
o Up to 1GB on-board DDR2
o Intel Platform Controller Hub EG20T
o VGA,LVDS
o HD Audio
o SD Card
o Dual SATA
o Mini-PCIe
http://www.inforcecomputing.com/SYS940X_ECX.html
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Tom Zanussi <tzanussi@intel.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SystemTap needs to provide uprobes.ko in order to support user space
probing. Build and install the module on systems that support it.
Additionally, split off common bits into systemtap_git.inc.
(From OE-Core rev: 3cc4ba935444240b93abdc726342658ada803118)
Signed-off-by: Wade Farnsworth <wade_farnsworth@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the target image may not contain dev tools, it is useful to
provide native systemtap in order to be able to compile systemtap
scripts for the target.
(From OE-Core rev: 507bd29c5d1a3459e376e2d2c338b7e2a0afabaa)
Signed-off-by: Wade Farnsworth <wade_farnsworth@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bump SRCREV to the latest stable version of systemtap.
(From OE-Core rev: ea57a29c75aa8265aecb8b0acd9c29340e98092c)
Signed-off-by: Wade Farnsworth <wade_farnsworth@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -stable team released v3.0.18, so it becomes the new base for the
linux-yocto_3.0 recipe.
Along with the 3.0.18 update this kernel refresh brings in the following
changes:
59314a3 meta/beagleboard: Using CONFIG_PANEL_GENERIC_DPI=y
b168325 crownbay: use emgd-1.10
281b80f kver: bumping to v3.0.18
0d5d0dd common-pc*: add SMP and virtio
(From OE-Core rev: b58d330a88a64ac8ff82362cc90cc817f38b82cd)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding initial support for the linux 3.2 kernel.
Although the branching and naming has changed slightly, the same BSPs and
features exist in this tree as have existed in previous linux-yocto versions.
Notable features of this update are:
- streamlined branch naming
- configuration and functionality split in the standard kernel
- creation of the 'tiny' kernel type branch
- audited kernel configurations with optional features documented
in the meta branch
- feature and BSP refreshes
- 3.2-rt support refresh
- qemu ppc graphics support
Build and boot testing has been performed on all emulated targets
(sato and core).
(From OE-Core rev: 72264df07d7e57ba8232aae90b76ab220fdb2d22)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the kern-tools SRCREV to import the following changes:
a7a9930 kgit-meta/scc: allow multi-line defines
e3442c6 kern-tools: add required and optional kernel configuration processing
b56b67b configme: extract redefinition and mismatch information
6118eaf kern-tools: remove branchname assumptions
These are required to support the kernel configuration policy changes
implemented in the yocto 3.2 kernel repository.
(From OE-Core rev: 5a3759f4b23361dd2c1968ce51e5c3695a661972)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As binutils is required by perf to build and is GPLv3 licensed adding
GPLv3 to INCOMPATIBLE_LICENSE will cause linux-yocto to be skipped.
Long term we should look at moving perf to a separate recipe but as a
short term solution this patch will ensure that when GPLv3 is in
INCOMPATIBLE_LICENSE perf is not built and it's dependencies are not
added to build.
Fixes [YOCTO #1879]
(From OE-Core rev: ce61f9031b54067bffa304dab90c31278631dcdf)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is to upgrade kexec-tools to 2.0.3.
And since fix_for_compiling_with_gcc-4.6.0.patch is there in 2.0.3, it is removed.
(From OE-Core rev: aea75907ff0ad11b7a17910f74491278e55bbc10)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two issues are fixed with this commit, the ability to use the keyboard
on a graphical qemu boot and enabling ethernet by default on a 3.0
kernel.
The keyboard is fixed via the same method as the other simulations with
the addition of console=tty on the qemu command line.
Ethernet is fixed by adding a dependency of PCNET32 to the qemuppc
configuration, which allows us to build ethernet directly into the image.
(From OE-Core rev: 29c71eeb98aa8ce0fb0e0a30483499525bf6305d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It provides trace read and write libraries, as well as a trace converter.
(From OE-Core rev: d14441874163bd579d9901f9bc07852882502100)
Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch intended to integrate the lttng-modules 2.0 package
containing the kernel tracer modules.
LTTng-modules 2.0 is currently in pre-release (-pre11), so we
have to update it when official released.
lttng-2.0 supports lttng-modules extra builds, which don't need
any patches on Linux kernel vs the previous version of lttng.
As described in README of lttng-modules-2.0, so far, it has been
tested in the latest kernel on x86 32/64-bit, and powerpc 32-bit,
, build tested on ARM. So does yocto kernel, the related tests
on qemux86 and qemuppc has been validated and a build test on
qemuarm passed too with this patcheset.
(From OE-Core rev: b054921f7dd59519a896a4e1a5f40965d4abd87e)
Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch intended to integrate the Linux trace toolkit, which
is a suite of tools designed to extract program execution details
from the Linux operating system and interpret them.
lttng-tools 2.0 is currently in pre-release(-pre16), so we have to
update it when official released.
(From OE-Core rev: 4733cd6501e5d39b4229c3da79529d6a3ae844f6)
Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch intended to integrate the LTTng UST 2.0 package, which
contains the userspace tracer library to trace userspace codes.
(From OE-Core rev: 4ed09cb80196c7a3f691c8b9304df7c1fe4a8be5)
Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to include the following fixes from Khem Raj and
Zumeng Chen.
6f5b118 compiler.h: Undef before redefining __attribute_const__
fe80c1e oprofile, arm/sh: Fix oprofile_arch_exit() linkage issue
(From OE-Core rev: 02e22816d68dc2bac7fed6952e52ea8a3d9532d2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With this new emulation, existing qemuppc functionality is maintained
and other functionality such as framebuffer + sato and NFS boot are
added.
(From OE-Core rev: 52ea026df141ea23bbab38ad3a9733c15097eaa4)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* from meta-oe (originally from org.openembedded.dev)
* There are no reasons to install kdump when only kexec is needed.
*
* In oe-core/meta there are no references to kexec-tools so
* the recipes inn external layers rdepending on kexec-tools should be
* fixed and rdepend on kexec and/or kdump.
*
* Bump PR.
(From OE-Core rev: 1f40a5486f703684c5d1d7360ef3cbdf75577495)
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd has its own mechanism for loading kernel modules at startup
(From OE-Core rev: 553deffc8040afabd56b1c1d87a8a8d24bbae5d0)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no reason to continue to carry this feature
(From OE-Core rev: f1193e077d187b9ce18ae0686b1a1f0f9832036d)
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pkglibexec_SCRIPTS pair is valid. the 1.11.2 introduced an bug
to make it invalid. Now the automake 1.11.2 recipe is fixed, so
no need for this fix for systemtap recipe.
(From OE-Core rev: 0d0a9c71499c6b973fe08b02838b99e47785a07e)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The commit:
kern-tools: update SRCREV to pickup git operation fixes
Brought in the ability to trap failed git operations on the working tree,
but what it missed were some branching changes that allow arbitrary
branch points and the ability to create a branch multiple times (if a feature
is included multiple times). The graphics driver branches used by some
BSPs need this part of the change to properly handle graphics driver
branches.
Updating the SRCREV to pickup the associated kern-tools changes for this
support.
(From OE-Core rev: 229036a961bae61847a05546a92dfc93a88c6f67)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have witnessed non-deterministic failures of perf for some platforms
whilst looking for bfd.h, a header provided by binutils.
(From OE-Core rev: ab56f27d96cbd2c79ca16d12333687ca9720934c)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch removed two patches because those are there in the upstream.
(From OE-Core rev: 787ed39a2b1a598482dfc3354c4698e3a586a096)
Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
automake version 1.11.2 has made use of dir variables more strict.
The pkglibexec var can not have SCRIPTS suffix. Using pkgdata
instead.
Fixes this error:
| Makefile.am:25: `pkglibexecdir' is not a legitimate directory for
`SCRIPTS'
| autoreconf: automake failed with exit status: 1
| ERROR: autoreconf execution failed.
NOTE: package
systemtap-1.6+git1+820f2d22fc47fad6e09ba886efb9b91e1247cb39-r0: task
do_configure: Failed
(From OE-Core rev: c0db889441f16232c59c85a8a858bb833bb34b52)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
linux-yocto-tiny drops the linux-tools and sets the KMACHINE
branch to standard/tiny.
(From OE-Core rev: 8a76f80cabb8df5959707ee708f2c00b28a784e7)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the kern-tools SRCREV to pickup the following commit:
[
kgit-meta: add error checking and autoconfiguration to git commands
When git commands are embedded into feature descriptions, they can
fail for a variety of reasons. The current meta series processing does
not trap errors, and will continue to process potentially failing
commands. All git commands are now checked for their return code, and
in case of error, the error code is passed up via early exit.
A second common git issue is on a new machine that has not been
configured with a username/email for commits. This is now detected
by checking for a global user.name. If one is not found, a local
user name of "Auto Configured" and email of "auto.configured" is
created to allow git operations to succeed.
]
Fixes [YOCTO #1838]
(From OE-Core rev: 015cb39ccf490de07bfd007fafc6d75c6c152add)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to pickup 3.0.12 support for the remaining
non-x86 boards (routerstation and pandaboard).
(From OE-Core rev: 0d91d4dc6618b453ebcd0c357fd15ce4e28f1341)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch to contain the board config and description
for the cedartrail.
(From OE-Core rev: ce52a61b0279669b0e312ab2f4a72329ad711a36)
Signed-off-by: Rahul Saxena <rahul.saxena@.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to v3.0.12 and the rt30 patch.
(From OE-Core rev: cb42d82afc4b8fda723c4ef2db91880b69f09ae6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding EFI configuration from the following meta branch commit:
Add EFI scc and cfg files
Basic EFI support only requires CONFIG_EFI=y, this is sufficient for
some boards, and desirable for small configs. This is done with efi.scc.
Additional support for CONFIG_EFI_VARS, CONFIG_EFI_PARTITION, and CONFIG_FB_EFI
is provided via efi-ext.scc (extended) as this pulls in the block layer,
framebuffer support, and virtual terminals.
I'd like EFI_VARS to be part of the base config, but I have received
reports of it failing in some situations. Keeping it separate ensures
basic boot can work with the fragments as defined.
(From OE-Core rev: d590f6d12ba7d650ba1a0dd9d5211fb3b2c50fb1)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating SRCREVs to pickup the v3.0.12 -stable updates and to get
three EFI fixes from Darren Hart:
x86, efi: Convert efi_phys_get_time() args to physical addresses
x86, efi: Make efi_call_phys_prelog() CONFIG_RELOCATABLE-aware
x86/rtc: Don't recursively acquire rtc_lock
(From OE-Core rev: f87f62f1e7de88b482a9d1877deae42939aedbe0)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a quick audit of only the most obviously wrong licenses
found within OECore. These fixes fall into four areas:
- LICENSE field had incorrect format so that the parser choked
- LICENSE field has a license with no version
- LICENSE field was actually incorrect
- LICENSE field has an imaginary license that didn't exist
This fixes most of the LICENSE warnings thrown, along with my prior
commit adding additional licenses to common-licenses and additional
SPDXLICENSEMAP entries.
HOWEVER..... there is much to be done on the license front.
For a list of recipes with licenses that need obvious fixing see:
https://wiki.yoctoproject.org/wiki/License_Audit
That said, I would suggest another license audit as I've found
enough inconsistencies. A good suggestion is when in doubt, look at
how openSuse or Gentoo or Debian license the package.
(From OE-Core rev: 3083dd70b3a9fa01fcc3cf00373b05502505996e)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously the install of the kern-tools was manual and fully controlled by
whatever build system was integrating/using the utilities. To make this more
generic a Makefile is now provided to take care of installing and removing to
DESTDIR.
Updating the kern-tools recipe to take advantage of this new facility.
(From OE-Core rev: 8af13cc0038111cbb13d9718256d491d326ed5e8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As a transition step to moving kern_tools into the kernel tree
itself this change adopts merge_config.sh as a common base for
merging configuration fragments. So we add merge_config.sh and
pre_config to the list of kern_tools.
(From OE-Core rev: 78efb73e0bca09c09574ce23622859db412a26c8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating linux-yocto to a 3.0.10 base, and refreshing the rt kernel
branches to contain the latest 3.0-rt27 changes.
(From OE-Core rev: bdeedc55ad2cf3c26828bc51d8ad06b64469a500)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the branch SRCREVs to pickup:
- The kernel.org -stable update to v3.0.9 is available and merged into
all BSP / kernel branches.
- Darren Hart's cleanups to the mount root patch.
(From OE-Core rev: 039cccc0f50827413ebb68fcf0514f242f4d77aa)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To limit the number of active recipes in master to 3 (v2.6.37, v3.0 and
-dev), the 2.6.34 recipe can now be removed. It is available in the
previous release branches and will continue to work, but won't be
updated as part of ongoing dev efforts.
(From OE-Core rev: bd5f38b0bb063b2fb2e46abc5d7ffaed4b6b502c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Newer kernels replace TC_BARRIER with TC_FLUSH. Ensure trace-cmd
can build regardless of the linux-kernel-headers version.
This is intended as a stop-gap to get the builds working again. A
proper fix will need to be discussed with the trace-cmd community.
RP: Tweaked the SRC_URI to remove unnecessary path and added PR bump
(From OE-Core rev: 869372e7e11b9ba38fcfb721c460404c6f31db95)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the trace-cmd and kernelshark recipes to version 1.2. Rename the recipes
to the more descriptive trace-cmd_1.2.bb and kernelshark_1.2.bb respectively.
Update addldflags.patch for 1.2 and current Upstream-Status (Accepted).
Add make-docs-optional.patch to avoid building the new doc target which
requires asciidocs. We should add asciidocs and properly package the
docs, but for now it's more important to get the sources current.
(From OE-Core rev: 73ac48377491561151658617d8cc45936242eb0c)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta branch SRCREV to pickup a series of BSP
cleanups and add -rt support to the romely.
ae3e64c meta/romley: Add rt support Add rt support to the meta branch for romley.
6c78969 meta/fishriver: enable hpet
bc4452a meta/jasperforest: use power/intel feature
6e9634e meta/fri2: use power/intel feature
ec949f5 meta/fishriver: use power/intel feature
(From OE-Core rev: d74dec5af2223ab97aea6feee978f4e27adcdf96)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Kishore Bodke <kishore.k.bodke@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The board branches are updated to have v3.0.8 as their base kernel
revision, and the version in the recipe is updated to match.
This commit also updates the meta branch to pick up the following
4 commits:
4095bb5 meta/common-pc-64: remove igb
17565fa meta/crownbay: use power/intel feature
8948937 meta/sugarbay: use power/intel feature
fcbc8a9 meta: add power feature
(From OE-Core rev: c237410bbc177495dab2b12b3a7aa4a75fb61efa)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also remove patches that are no longer needed, as well as use the
installation that is provided by the Makefile. Put all the extra
stuff in a new dtc-misc package
(From OE-Core rev: 43213fd610da7b550e6d738e224b49004776f799)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default libc-headers is v3.1 and building against the new
headers but booting an older kernel has been shown to work.
Older 2.6 based header builds can easily be reproduced, but
having all the old recipe iterations available is not required.
(From OE-Core rev: e3f5d612791329cc7df100e5cf745b2b47ce7259)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provide both a 3.0.x and a 3.1 set of headers to the toolchain.
Compatibility is maintained with older 2.6 headers by creating a
new variable that changes the SRC_URI based on the major version
number of the kernel.
Built and booted with 2.6.37.2, 3.0.8 and 3.1 linux-libc-headers.
(From OE-Core rev: 13c233ce4551542481d7a6390ff2119671137b95)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each time a new linux-libc-headers is created the same code is
cloned. Placing the common functionality in the .inc file simplies
each recipe and make maintenance easier.
(From OE-Core rev: ccf3bf70a1a83ac55e47acfa4759838f7f4834ae)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apparently this pactch was duplicated by backported
patch, and needed to be applied more broaded than to
just ppc.
(From OE-Core rev: 182e4768b651e58de5b42f9fb55ae9816b57233b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update: move to latest SRCREV, use non-kernel.org URI
Merge: wl12xx symlink + packaging, install all firmwares
Fix: * all entries in PACKAGES are in PROVIDES already
* A package always RPROVIDES itself
* A file can only get packaged *once* so only one rtlwifi package will get the license
(From OE-Core rev: 8c7adb66d297ccf9f2f15eb311e5de7d5b07c6df)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
__ppc64__ is not defined on powerpc64, rather __powerpc64__ is, this
uses a patch that is already upstream to fix builds for powerpc64
(From OE-Core rev: 4732222c46652951e66aae377631f4a361179d8f)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building sato-sdk for an x86_64 target throws this QA error:
| ERROR: QA Issue: Architecture did not match (62 to 3) on /work/x86_64-poky-li\
nux/kexec-tools-2.0.2-r1/packages-split/kexec-tools/usr/lib/kexec-tools/kexec_t\
est
kexec_test uses 32-bit code for testing - add an INSANE_SKIP exception for it.
(From OE-Core rev: 0dbf91969bb16f4761f58426ff5b458139c4e235)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to import a series of changes to synchronize
live booting between multiple targets:
d05450e meta/fri2: enable booting from iso
3da7d2a meta/fishriver: enable booting from iso
52e1c49 meta/emenlow: enable booting from iso
87918ae meta/crownbay: enable booting from iso
(From OE-Core rev: 7100c50c8697a3eec446b9189bf49ecbea9b7264)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kexec does infact work and build on powerpc, enable the compatible
host for these machines
(From OE-Core rev: 1ccc1ec56bc50cee121c03ae8bb8ccacd32b8560)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following configuration changes:
67a46a6 meta/common-pc-64: enable live booting for common-pc-64
1010905 meta/common-pc: enable live booting for common-pc
b3c5fa7 meta/atom-pc: enable live booting for atom-pc
41c090e meta: update boot live config and move it to cfg/
d51b0e7 eg20t: update config options
The first 4 make the live-boot configuration shared and then reuse
them for the boards that currently are live bootable. The eg20t
is a cleanup of obselete kernel options and is part of the cleanup
of options for the 3.0 kernel.
[YOCTO: #940]
[YOCTO: #686]
(From OE-Core rev: da496bb570d05d0906a7310697bdd636c254540c)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This also removes dso_linking_change_build_fix.patch since the same
change has been made upstream.
Also removes unused SRC_URI checksums.
(From OE-Core rev: 776942858cad072facc9b5fea618ee88ff56a3a8)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were some config fragment warnings that were being hidden
by virtue of being output while generating the full config versus
the ones that were generated during the configuration audit task.
This change does the following:
- Updates the kern-tools SRCREV to include changes that move
all kernel configuration warnings to the audit script
- Updates the meta SRCREV for linux-yocto to get updated
kernel configuration fragments that are warning-free. These
are duplicated configs, and other changes that have a net
result of no runtime changes.
(From OE-Core rev: 8e67d4dd1e1bc64a84791abc613e237e29dd2aaa)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 3.0 kernel to enable blktrace to match our previous
functionality. This is done by the following meta branch commit:
[
meta: add blktrace feature
Add a 'blktrace feature' that turns on kernel support for blktrace, a
block I/O tracing tool. Added to 'standard' alongside similar tracing
tool config.
(From OE-Core rev: 21654cbf766f9c319b2fc8a08f0060c60ef005eb)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following commit for the -rt machines:
[
preempt-rt/base: correct 3.0.3->3.0.4 mismerge for, stop_machine.c
Commit 0b805cce57f61a244eb3b8fce460b14f1be442b3 dropped a change making
stop_cpus_mutex non-static, resulting in a build failure for 3.0.4-rt
kernels.
Restore the move to non-static from commit
6857336c7fddaf460a13adc0c395698fcf9423ff.
Reported-by: Kishore Bodke <kishore.k.bodke@intel.com>
(From OE-Core rev: 1bc26dca631da53d956008a4570c46012c478435)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following meta changes:
12574e5 meta: create seperate feature for 10/100 LAN support
c8b37bf meta: Remove 10/100 LAN support.
(From OE-Core rev: 4ab79c8e02f9fe7a02c56019d5b169ad4f0e3aec)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the initial development of the linux-yocto recipes there were
several additional tasks that needed to be run in any inheriting
recipe. At that time, they didn't seem to fire if they were in the
include file versus the recipes themselves. As it turns out, these
tasks do work fine if placed in the linux-yocto.inc file, and the
rest of the recipes can be simplified as a result.
(From OE-Core rev: a1ab7c5e03df97e630dfee470ff7959d3143bf41)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upating the meta data and machine branch contents with the up
to date merge of utrace.
(From OE-Core rev: cb8efc0e1ec00892b46325aabfb1b4020a46c078)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[
Author: Tom Zanussi <tom.zanussi@intel.com>
Date: Fri Sep 2 23:45:12 2011 -0500
meta: re-enable systemtap feature for linux-yocto
Re-enable the 'systemtap feature' that turns on the kernel options required
for systemtap, a system-wide tracing tool.
(From OE-Core rev: fdaaddbf2a673c7030c3e15e2f65cb13af3db720)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #940]
Since v3.0.4 is likely the last stable update in the the release
timeframe a configuration audit was performed. This updates the
SRCREV to remove obselete, and improperly defined configuration
items. With this, all qemu* BSPs configure with no warnings.
(From OE-Core rev: d19eaf7ca92c6632d42d12120800028f77ef21aa)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The v3.0.4 stable kernel is available and it can now be merged
into linux-yocto. Build and boot tested on all qemu* machines.
(From OE-Core rev: 0f3750ee83b8fe012cced2e376ec780a6e7f189b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After constructing a kernel configuration file it then needs
to be located in the tree so it can be audited against the
final .config. The previous string that was used for the search
pattern contains the kernel version. If the recipe space kernel
version and internal tree version are out of sync, this will
cause the constructed config to not be found. By removing the
version from the search string, we can still find out config and
gracefully adapt to minor version skew.
(From OE-Core rev: f072ddc43828ebe8df4dd7433726775dd547580b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also enable for arm, since systemtap now works on arm and remove the
gcc-4.6 compile fix patch since the problems it addresses have been
fixed upstream.
(From OE-Core rev: 09fa8e139b0c06f961927ac192d644bebdf31abf)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1392]
Updating the SRCREVs to pickup:
[
mips/rt: convert cascade interrupt non threaded
The preempt_rt kernel forces all irq interrupts to be threaded,
but special interrupts can be excluded from this conversion.
The cascade interrupt should be part of these exceptions.
In this case, irq2 is initialized before "kthreadd" task, which
converts irq interrupt to threaded.
If this irq is threaded, the kernel calls "try_to_wake_up" function
to wake up "kthreadd" task, but at that moment, "kthreadd" task
has no been initialize and try_to_wake_up wakes up a NULL task.
(From OE-Core rev: 7ceb78a42f7d9b6aa4b984d04ac13f8dc23a9095)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the update of the bitbake recipe's string to 3.0.3 the internal
version marker in the kernel stayed at v3.0. This meant that kernel
configuration auditing the constructed file couldn't be found and audit
warnings were thrown. This syncs all the recipes and get back to
clean configurations.
(From OE-Core rev: 2be439c14790fec8ad7ffe1b6c531d41d0329eaf)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #916]
Fixes [YOCTO #900]
Merging:
[
commit 4ae8f8605c81c39b959948e23f7123294a5dfb3f
Author: Liming Wang <liming.wang@windriver.com>
Date: Wed Aug 24 10:45:19 2011 +0800
x86: use vdso gettime fallback versus returning an error
__vdso_clock_gettime should fall back to call vdso_fallback_gettime function
if no clockid is selected, not just return error.
(From OE-Core rev: 8069549937f8d1e266eb0a2d6b4c1321b08ed69b)
Signed-off-by: Liming Wang <liming.wang@windriver.com
]
[
commit aeea99683c7283f1f3320bf2ee7085ee252d4e7e
Author: Liming Wang <liming.wang@windriver.com>
Date: Fri Aug 19 17:43:49 2011 +0800
meta: add APM Emulation option to beagleboard
apmd daemon needs this option to work, so add this to beagleboard
kernel config file.
Signed-off-by: Liming Wang <liming.wang@windriver.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO: #686]
During routine maintenance some base changes were re-wound on
the common branches. All machines still had these changes, but
any new machine branched from the common base would miss those
changes. This update restores those commits to the standard branch
and merges them out to all child branches.
The meta branch update adds a configuration item to support
live image booting on qemux86.
(From OE-Core rev: 518de98e8c1cb4bd1d76c562007b9eccc196c572)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #916]
Adding APM emulation and CONFIG_USB_MUSB_OMAP2PLUS to the beagleboard
base configuration.
(From OE-Core rev: aea2785ccd36addd163a6b2e36fa2c9a8108ba00)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1391]
Fixes [YOCTO #1389]
qemuppc must have a dedicated branch for -rt support, since it has
board specific patches that are not suitable for a common location.
This fixes the boot by propagating some common fixes and by syncing
to the latest meta-configuration.
There are some variables that are now in linux-yocto.inc and need not
be defined by the kernel recipe itself, so we can safely remove them
with no impact on the build.
CC: Darren Hart <dvhart@linux.intel.com>
(From OE-Core rev: fc0220b59a15f8cff57c13fe7966d05f7386da71)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREV to pickup a series of changes to the
kern-tools that allow more flexible creation of trees from
scratch. This functionality is not used by the normal
kernel build process and has no impact on existing builds.
(From OE-Core rev: faaa03c2a166e37a11edd52011799e6a8cff144d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to pickup the kernel.org -stable update for
3.0.3
(From OE-Core rev: 450b6eded024c365d0ad4808b492d73c4cd02f6d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the preparation of some linux-yocto extension documentation it
was clear that some variables are being defined in each recipe, when
they don't have to be. Moving the defaults into linux-yocto.in and
allowing them to be overidden in recipes simpifies the reuse of the
base infrastructure.
(From OE-Core rev: 0ca26544efe8d650f36db9dc1c3b3a15110d7e31)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some place pnum=1 is used which is removed as well since
striplevel=1 is default
(From OE-Core rev: 4e108857e0d40105f7ecbc55e99bd6c367bb7386)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the linux-yocto meta SRCREV to pickup new target
configurations and features.
(From OE-Core rev: 110ca8dcaee263bc3c8380bcb91f6ada20655c14)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was some confusion around the 3.0 version string in the
linux-yocto recipe when the merged version was 3.0.1. Bumping
the version string should clarify what version will be fetched.
(From OE-Core rev: 29017755329ff1ad740fe094a4a89057e9c2a48d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Keeping the rt recipes in their own layer has led to maintenance issues,
particularly with the linux-yocto-rt recipes. As these kernel types are part of
the same linux-yocto source repository, it seems reasonable to include the rt
kernel recipes alongside the standard recipes. A new recipes-rt directory for
the other recipes provides adequate separation and eliminates the need for a
separate layer.
As there is no meta-rt/conf/layer.conf to force the kernel, users must now
specify the rt kernel in their local.conf or in the machine.conf:
PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-rt"
The merging of the rt recipes into the core also eliminates complications with
multiple layer dependencies for new BSP layers. Having to either separate RT
BSPs from standard BSPs or force users to add meta-rt to bblayers even when not
building an RT BSP (because the RT BSPs in the same layer would fail to parse
without it) was sub-optimal at best.
(From OE-Core rev: bafaaad264fe3e745c714951ddcf2784d33b755a)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs for linux-yocto to pickup a series of changes
that were made to support the build/boot of preempt-rt on 3.0.x.
7782fc6 routerstationpro: remove CONFIG_PREEMPT* definitions
b51300c meta/rt: sugarbay preempt-rt support
735711e meta/rt: common-pc[-64] preempt-rt no branch fix
53026bf meta/rt: jasperforest preempt-rt support
99bc260 meta/rt: fri2 preempt-rt support
e746ab8 meta/rt: fishriver preempt-rt support
fa1b73f meta/rt: emenlow preempt-rt support
1f686ab meta/rt: crownbay preempt-rt support
64a5069 meta/rt: arm-versatile-926ejs preempt-rt support
7f827a1 meta/rt: mti-malta32-be preempt-rt support
930a983 meta/rt: qemu-ppc32 preempt-rt support
367fc55 meta-rt: rsp preempt-rt support
b8a62ea meta/rt: mpc8315 preempt-rt support
b5f9daa meta/rt: beagleboard preempt-rt support
1e6e9eb meta/rt: use CONFIG_PREEMPT_RT_FULL for 3.0 kernels
eb5a06b boot: move -Os patch to standard branch
c692a23 meta/rt: remove explicit patch references
8a2ac6b meta/rt: updating to rt8
76b3679 meta: atom-pc update definition to re-use preempt-rt
(From OE-Core rev: 4cb49cc3212fb110bd90f29e3644df5e7030a359)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cross recipes should not RDEPENDS on any package. Cross recipe has no
"PACKAGES" define, thus clean RDEPENDS_${PN} value to ensure correctness
in multilib.
(From OE-Core rev: b91fbc597c182dcbd514639a24c575b0cccc8741)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
3.0.1 -stable has been released. This now becomes the baseline for
the 3.0 linux-yocto tree. As was the policy in the 2.6.34 and
2.6.37 kernels, the version stays at 3.0 in the recipe.
Build and boot tested on qemu* targets.
(From OE-Core rev: 015a74ca21b06d08c04d18f77b8c2a74ffab5a66)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The atom-pc preempt-rt configuration wasn't pulling in the common-pc
settings, and wasn't defining re-use of the preempt-rt/base branch
properly.
(From OE-Core rev: f60c20322018afe9d27aa2d3b085c58ff0dee867)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building an external tree or bootstrapping a BSP the
external branch may not have been checked out. The tools now ensure
that the tree is ready for configuration, so we no longer need to
force the checkout of the external branch.
This change is coupled with some kern tools tweaks as follows:
40d9bab updateme: allow the location of board descriptions based on defines
59859ca createme: use branch name when creating meta data
91b4275 configme: determine meta branch based on directories, not branch naming
f5a915c kgit-meta: make branch creation and renaming more robust
(From OE-Core rev: 02c82bf5255b09bb27a0a4509861a3d2bd84b09f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This address [YOCTO #1005] which was waiting for upstream updates
from the lttng and GDB teams.
(From OE-Core rev: 0d240f56ea0128c1228f7cfe1471039a7b602a88)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the linux-yocto SRCREVs to pickup changes from the
continuing uprev to korg 3.0. With this set of update, the
meta/feature audits are complete.
qemumips and qemuppc are fixed with this update and can now
boot to a prompt.
(From OE-Core rev: b4ec5c27b51c15e8bde7ca2597329c4f5b801240)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ..install.cmd conflicts between various configure runs.
This isn't used anywhere, so remove it to avoid the conflict.
(From OE-Core rev: f7b1ccfaa15e2dd4ff25f2a5f56ac3aff63c7288)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to have static module-init-tools for the cross
tools. Building such binaries requires a static libc which is not
required by the rest of OE and which is deprecated and not installed
by distributions like Fedora.
(From OE-Core rev: ff98be5bd096edc9728ab21d0a344d88c0d5add8)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1261]
Updating the SRCREV to pickup some branch creation fixes that
were causing an invalid branch name to be used on a repository
that couldn't support it (i.e. standard/base on a 2.6.34).
With this the 2.6.34 and 3.0 -rt branches will build.
(From OE-Core rev: e1df34c9d4614adc04528b73a8860e973c5db54d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Establish the infrastructure to start more comprehensive linux-3.0
testing. With this in place, the populated linux-yocto 3.0 can
optionally be built for supported machines.
Note: this commit does not change the default for any targets and
as such, it would need to be explicitly set as the preferred version
to be built. The staged introduction allows some remaining issues to
be solved, while making this available. Subsequent commits will be
done to switch qemu machines ones they have been validated. If the
default for a machine is not this kernel, consider it best effort.
(From OE-Core rev: 6b9379e9d409713e5bd9bb46b38968d41cd834e1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As reported by Koen Kooi, the LICENSE for linux-yocto can be tightened
up to specifiy the particular version of the GPL.
cc: Koen Kooi <koen@dominion.thruhere.net>
(From OE-Core rev: 0b163efe5536555867f71561914414648b08ed24)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed on uclibc which does not have all GNU extentions
(From OE-Core rev: 22fdaba9813beb276caf2b6194fccc4cccf138c4)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
intl support is not inbuilt into libc like glibc
so we have to link it explicitly
(From OE-Core rev: 2c0dab3fc508b4b80a61b8ce0f6292ba66ad86d3)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
on 2.6 kernels we do not have query_module so warn
about it
(From OE-Core rev: 3c6661680822246658ea47394ef1673fc068551c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes bug [YOCTO #1161]
Fixes bug [YOCTO #773]
This streamlines the routerstation pro configuration to remove options
that are either unecessary or that are causing bugs.
Also added to all branches is:
commit ffd73d6b2a9bfa0de5710b90a2237f4be66ae9a7
Author: Yinghai Lu <yinghai@kernel.org>
Date: Thu Jul 14 15:27:44 2011 -0700
mm: use alloc_bootmem_node_nopanic() on really needed path
commit 8f389a99b652aab5b42297280bd94d95933ad12f upstream.
(From OE-Core rev: 194b487b42dac479459427d653ee9d6dee1bcca4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
busybox-1.18.4 installs /bin/powertop and the powertop recipe installs
/usr/bin/powertop. So, in PATH, if /bin appears before /usr/bin, we would
run the version offered by busybox, which has a very limited function (e.g.,
no parameter is accepted) and this causes trouble to eclipse plugin.
We can use update-alternatives for powertop with higher priority to resolve
the issue.
Fixes [YOCTO #1208]
(From OE-Core rev: e4102c3d2205371db4da7db7bca1a5853bb3c23e)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As 2.4 support is being phased out, remove modutils.
(From OE-Core rev: e7bc441686c384f025a8b722441bdb1f66d5f8db)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update to get support for Linux 3.0.
Delete the ignore_arch_directory.patch (as it does not apply to 3.16).
(From OE-Core rev: 773fc8fc45224e37d442d927ed28d50680fb954c)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change to only depend on virtual/*/depmod.
Change all calls to only use depmod.
Do not install depmod as depmod-2.6
Bump PR in module-init-tools-cross.
(From OE-Core rev: 351e352c2e44a3d8103594ca7e1d8404979a220c)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed on the mailing list, this variable isn't useful and if wanted
would be better implemented by distros using pn-X overrides.
This patch executes:
find . -regex ".*\.\(bb\|inc\)$" | xargs sed -i '/^PRIORITY = ".*"$/d'
against the tree removing the referenced. Thanks to Phil Blundell for
the command.
(From OE-Core rev: d122343362669c683acc4af295971a62cbc823fc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 2.6.37.2 version is kept to allow the qemu kernels and libc headers version to match
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake now allows the umask to be specified per task. The
following tasks will have a umask of 022 set by default:
do_configure
do_compile
do_install
do_package
do_populate_sysroot
do_rootfs
do_configure and do_compile need a umask of 022 set because -many- recipes
directly copy generated files out of recipe's build directory. Instead of
fixing each existing and future recipe, it was shown to be much easier to
just set the umask.
(From OE-Core rev: 0cfa7ebcf661aa0645c6d4d858b04946ebacb7e4)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The firmware was installed 0666 which could have been a security
issue.
(From OE-Core rev: db6a4e07f3a35163c751996ca3ac86b6bf5650e9)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move udev script to execute ealier since module autoload needs it to
create device nodes.
Also move sysfs before udev which has dependency on it.
(From OE-Core rev: fe7cef6febdb938b535259b09690192b17074314)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If perf isn't installed under "fakeroot" (pseudo) control, all of the files
are given the build user's uid/gid.
(From OE-Core rev: 805d80eb30fb34b3d2a12b8ba4db8b813ff5c475)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The perf component is built with the kernel, so ensure that it gets the
debug information associated with it.
Also bump the PR in the linux-yocto-* to ensure they get rebuilt.
(From OE-Core rev: 17f76de8ab8b7c9e62c1149017a3fa78866d9300)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of sync'ing the in-tree beagleboard support, the
following commit has been pushed to all branches, and hence
the SRCREV update:
bb8e31f USB: ehci: remove structure packing from ehci_def
The meta SRCREV update is to capture the new and sync'd BSP configuration.
(From OE-Core rev: f9b77564cc7f62ea0bc4b4320036f2d6d5c90e27)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREV for the kernel repo's meta branch to capture
the following commits:
94fa015 meta: add taskstats experimental feature group
4fb2ed5 meta: enable freezer support
88d619e meta: enable fuse and cuse as modules
f465827 meta: add namespaces + experimental configs
fbdd376 meta: add devtmpfs config group
b04f6d9 meta: re-enable cgroups options in the standard kernel
There's also a change to the recipe itself to trigger the taskstats
optional config items by default. This is to allow the introduction
of these changes gradually, since other recipes inheriting the kernel
can add or ignore these options at their convenience.
(From OE-Core rev: 91ddf0ad3a120bbfb5a24bd853d4d195291faa95)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the SRCREVs to account for the merge of utrace to support
systemtap.
(From OE-Core rev: ac12cbf31433743e5966d1d2013e010f0c548c43)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove unnecessary dependency via configure option and make oprofileui use GIO
(From OE-Core rev: ad5481f6348d1bc504729efd4321bf1fcac4083b)
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Systemtap only supports x86, x86-64 and powerpc at this point.
v2: updated to reflect comments from Koen Kooi and Phil Blundell to use
COMPATIBLE_HOST instead.
(From OE-Core rev: 835d817f1ba7b99167743fdb86ba80f3a07bd82d)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to fix a bad commit which resulted in the
tree being dirty after checkpoint, and hence a failure during the
patch phase. The meta commits never modify code outside the 'meta'
directory tree, a rule that was broken with this bad commit.
Without this fix, you may see an error like:
| [INFO] doing kernel configme
| [INFO] Finding user(s) of branch "yocto/standard/fsl-mpc8315e-rdb"
| [INFO] Branch meta-temp used by fsl-mpc8315e-rdb-standard.scc
| [INFO] collecting configs in ./meta/meta-series
| [INFO] checking out yocto/standard/fsl-mpc8315e-rdb
| error: Your local changes to the following files would be overwritten by checkout:
| arch/powerpc/boot/dts/mpc8315erdb.dts
| Please, commit your changes or stash them before you can switch branches.
| Aborting
| [ERROR] Checkout of yocto/standard/fsl-mpc8315e-rdb failed
| Error running the meta series for collecting config data
| config of meta-temp (fsl-mpc8315e-rdb-standard.scc) failed
(From OE-Core rev: 09e7b0535f8f2f287da670aabd1d6db76b90686f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing recipe names for the linux-yocto kernel builds
worked well when there was a single, or two versions of the
kernel available. But with the impending kernel updates and
retirement of older kernels, the re-use of the same recipes
for different kernel versions violates the principle of least
surprise.
To address this, the recipes are being renamed as follows:
linux-yocto_git.bb -> linux-yocto_2.6.37.bb
linux-yocto-stable_git.bb -> linux-yocto_2.6.34.bb
There continue to be versionless recipe names that feed into
versioned recipes at the appropriate points. They are:
linux-yocto-dev.bb (tracking the latest yocto dev kernel)
linux-yocto-korg_head.bb (tracking korg kernels)
There are no existing users of linux-yocto-stable in the master
branches to convert to the new naming, so these changes work
in isolation.
(From OE-Core rev: 576c87349a72a94357014ff29f55db692903ed80)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There doesn't appear to be any terribly good reason for kexec-tools to
depend on the kernel. (I verified that kexec-tools is buildable in a
clean TMPDIR without having previously built virtual/kernel.)
Having this dependency in place is a nuisance because it makes it
awkward to put kexec into an initramfs. So, it seems like we would be
better off without.
(From OE-Core rev: ba6da75657d0bf9ed48f0d6c4132f12993648e7a)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During work on 1.1 BSPs, some driver options changed. The
result was that the upstream fix b1d670f10e8078485884f0cf7e384d890909aeaa
needs to be available for all BSPs.
These SRCREV updates are the result of making that commit common.
(From OE-Core rev: c5dddf2dec0c6aed1db44a7ecf14d13502759d03)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This SRCREV update picks up the following changes from the
2.6.37 kernel tree:
- fishriver: create and use a dedicated BSP branch
- fishriver: usbnet fixes, but common to all boards
- standard: update omap baseline match the 2.6.34
upstream merge content
Built and boot tested on qemu*
(From OE-Core rev: 0843f22d34c0c9d2424a595aea0a2410e7d6ce23)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As a keyword, Upstream-Status is case sensitive.
(From OE-Core rev: 874038469e28d011b60b2d4bfd5a6fada6e754c4)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing PACKAGE_ARCH = "all" mechanism of sharing packages is problematic
with sstate since there are a variety of variables which have target specific
values and the sstate package therefore correctly changes signature depending
on the MACHINE setting.
This patch creates a new "allarch" class which sets:
PACKAGE_ARCH = "all"
(as per the existing convention)
INHIBIT_DEFAULT_DEPS = "1"
(since its not target specific and therefore can't depend on the cross
compiler or target libc)
TARGET_ARCH = "all"
TARGET_OS = "linux"
TARGET_CC_ARCH = "none"
(since these variables shouldn't change between the different packages and
target compiler flags shouldn't be getting used)
PACKAGE_EXTRA_ARCHS = ""
(since we shouldn't be depending on any architecture specific package architectures)
Not all PACKAGE_ARCH = "all" recipes can use this class since some run configure
checks on the compiler. This means they have target specific components and therefore
the "all" classification is incorrect.
(From OE-Core rev: 26e5e5feb695864b11e47e24017e254c28f14494)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added following variables for PR service:
USE_PR_SERV: flag of whether to use the network PR service
PRAUTOINX: search index for the network PR service
PKGE/PKGV/PKGR: epoch, version and revision used in package feed.
EXTENDPKGV: full package version string used in package relationships.
For the following recipes, replace EXTENDPV with EXTENDPKGV:
udev, xcb, xorg-proto, util-macros and linux-libc-headers
then removed the unused EXTENDPV and EXTENDPEVER variables
Users should use EXTENDPKGV instead for package feed generation.
(From OE-Core rev: ad00ad1d530074dc3a0f3376f96ad5a88a7b24e2)
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes bug: [YOCTO #1035]
Fixes bug: [YOCTO #1036]
Fixes gcc 4.6.0 compliation issues by importing the upstream change:
Author: Michal Marek <mmarek@suse.cz>
Date: Mon May 2 12:13:01 2011 +0000
kbuild: Fix passing -Wno-* options to gcc 4.4+
Starting with 4.4, gcc will happily accept -Wno-<anything> in the
cc-option test and complain later when compiling a file that has some
other warning. This rather unexpected behavior is intentional as per
http://gcc.gnu.org/PR28322, so work around it by testing for support of
the opposite option (without the no-). Introduce a new Makefile function
cc-disable-warning that does this and update two uses of cc-option in
the toplevel Makefile.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
(From OE-Core rev: 1d4c9412fb8226f882ef68223c9c5ec08cc2f5cc)
Signed-off-by: Michal Marek <mmarek@suse.cz>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Integrated-by: Bruce Ashfield <bruce.ashfield@windriver.com>
:100644 100644 0ef00bd... 1d8e7e9... M Documentation/kbuild/makefiles.txt
:100644 100644 7bd863e0.. 74bac80... M Makefile
:100644 100644 ed2773e... ba25c44... M scripts/Kbuild.include
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a BSP or layer specifies an AUTOREV for SRCREV, the logic
that matches expected vs real branch heads doesn't apply. We
always want the latest.
To solve the issues with invalid git revs causing validation
failures, we detect the AUTOINC value and do a early return,
skipping validation.
(From OE-Core rev: b4f1845f7cf42059984112e3f41a323b4c9d6dfd)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python: update upstream-status for patches
binutils: update upstream-status for patches
gcc 4.5.1 4.6.0: update upstream-status for patches
autoconf: update upstream-status for patches
automake: update upstream-status for patches
bison: update upstream-status for patches
distcc: update upstream-status of patches
fstests: update upstream-status for patches
gdb: update upstream-status of patches
intltool: update upstream-status of patches
libtool: update upstream status of patches
linux-libc-headers: update upstream-status for patches
make: update upstream-status for patches
perl: update upstream-status for patches
python-pycurl: update upstream-status for patches
python-pygobject: update upstream status for patches
python-pyrex: update upstream-status for patches
quilt: update upstream-status of patches
tcl: update upstream-status for patches
gnu-config: update upstream-status for patches
gmp: update upstream-status for patches
(From OE-Core rev: a62fa9b213b09bf48c48499d2e3c66a9ee306deb)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes bug: [YOCTO #955]
Updating the SRCREV to pickup the kern-tools change:
[
updateme: error if features are not found
Rather than silently dropping addon features, we emit a warning
and then exit with a failure code. The caller can then abort a
build and not simply miss features.
Passing --no-strict to the script disables this new functionality
if for some reason a feature description is missing on purpose.
]
(From OE-Core rev: d7f3e91c15328440ffbf501c502098133fd34d3a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tcf-agent: update its patch's Upstream-Status
screen: update its patch's Upstream-Status
which (GPLv2): update its patch's Upstream-Status
gnome-vfs: update its patch's Upstream-Status
libart-lgpl: update its patch's Upstream-Status
librsvg: update its patch's Upstream-Status
fontconfig: update its patch's Upstream-Status
freetype: update its patch's Upstream-Status
libxsettings-client: update its patch's Upstream-Status
libxcb: update its patch's Upstream-Status
libx11: update its patch's Upstream-Status
- remove 2 unused xim.patch.
libx11-trim: update its patch's Upstream-Status
libxcalibrate: update its patch's Upstream-Status
libxcomposite: update its patch's Upstream-Status
libxfont: update its patch's Upstream-Status
xtrans: update its patch's Upstream-Status
- remove abstract_socket_fix.patch as it's not used at all for long.
calibrateproto: update its patch's Upstream-Status
latencytop: update its patch's Upstream-Status
powertop: update its patch's Upstream-Status
settings-daemon: update its patch's Upstream-Status
gnome-settings-daemon: update its patch's Upstream-Status
libxklavier: update its patch's Upstream-Status
liblbxutil: update its patch's Upstream-Status
oprofile: update its patch's Upstream-Status and remove an unused patch
- delete xml_callgraph_details.patch as it's not used at all.
(From OE-Core rev: 94991fb73586887bfc740eacf190032dfb206a65)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are valid reasons to build repositories without meta
data present and there are times when this is an error. This
change adds sanity tests to the build process to detect missing
meta data and throw an informative error message.
Sanity checking is only triggered from recipes (linux-yocto)
that always require meta data to be present. Other recipes
are not impacted and can auto-generate meta data as required.
Without this change the build process suceeds, but incorrect
meta data will be used (with no user knowledge), which is not
the desired behaviour.
(From OE-Core rev: adf9f92e2f8f6cc3deba72a194ded85e160ad9e3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The machine configuration of the non-core (non-qemu) machines
exists in other layers. Moving the branch mappings, compatibility
and SRCREVs of these machines out of the main linux-yocto recipe
is the first step in that move.
(From OE-Core rev: 9187ac0173f26c6a621229ff588f495e9967e665)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We provide alternative implementation of sched_getcpu()
when compiling for uclibc
(From OE-Core rev: 03f442250579a392b49b54648840fbeb7c0a0142)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the linux-yocto/2.6.37 SRCREVs to pickup:
perf tool: Fix gcc 4.6.0 issues
1/1 [
Author: Kyle McMartin
Email: kyle@mcmartin.ca
Subject: perf tool: Fix gcc 4.6.0 issues
Date: Thu, 5 May 2011 00:06:01 -0400
commit fb7d0b3cefb80a105f7fd26bbc62e0cbf9192822 upstream.
GCC 4.6.0 in Fedora rawhide turned up some compile errors in tools/perf
due to the -Werror=unused-but-set-variable flag.
I've gone through and annotated some of the assignments that had side
effects (ie: return value from a function) with the __used annotation,
and in some cases, just removed unused code.
In a few cases, we were assigning something useful, but not using it in
later parts of the function.
kyle@dreadnought:~/src% gcc --version
gcc (GCC) 4.6.0 20110122 (Red Hat 4.6.0-0.3)
Cc: Ingo Molnar <mingo@redhat.com>
LKML-Reference: <20110124161304.GK27353@bombadil.infradead.org>
(From OE-Core rev: efc68af7259b4bcbb1e03a090128289a7cdc7944)
Signed-off-by: Kyle McMartin <kyle@redhat.com>
[ committer note: Fixed up the annotation fixes, as that code moved recently ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Backported to 2.6.38.2 by deleting unused but set variables]
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[Backported to linux-yocto kernel git version]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The BSP bootstrap and -dev use cases can be applied against
unbranched or repos without meta data. To allow the proper
and safe processing of those repositories, slight modifications
to the tools are required to pass the branch on the command
line (rather than detecting it always) and to only checkout
branches that exist.
(From OE-Core rev: ae754be8b43677604a853ec6f62b2490a91d8836)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To support quick uprev and testing, it is desireable to build
repositories that do not have embedded meta data. In this scenario
the meta data can be automatically created or provided externally.
This commit supports the first situation by detecting the lack
of meta data and then automatically creating a base set of meta
files.
(From OE-Core rev: 32c56cd6a5756f21d19d8a32239b783a7854aed3)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in this case, those non poky distro can also use these recipe normally
(From OE-Core rev: 0a57bd226cdb8332707fa0f46fcf0b067f03701a)
Signed-off-by: Yu Ke <ke.yu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Perf wants elfutils and elfutils on uclibc does not work due to
its usage of obstack_printf functionality missing from uclibc.
(From OE-Core rev: 8c2154fd5be3b7a633d87a23a1beffe9ce45c123)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turn these off for now to avoid the host infection issues for perf.
Fixes yocto [BUGID #994].
(From OE-Core rev: 51cf1ecab860269b3d822e2e372756b8bb8ffe26)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated LIC_FILES_CHKSUM as a new Copyright holder was added.
Removed the patch since 0.12 has integrated that.
Added arm into COMPATIBLE_HOST as 0.12 can build on arm now.
(From OE-Core rev: 43e450fcc005e44801c263de038fd5635cd426ab)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the current state, udev init script is loaded as 3rd and modutils.sh as
20th, so udevadm called in udev init script loads all kernel modules in some
unpredictable order, not honoring in any way specified order of modules in
/etc/modules. This causes some troubles mainly in the first boot. So to fix
this we now move loading of the kernel modules just before we exec udev init
script. Example of the current state:
Starting udev
rtc-m48t86 rtc-m48t86: rtc core: registered m48t86 as rtc0
rtc-m48t86 rtc-m48t86: battery ok
ep93xx-rtc ep93xx-rtc: rtc core: registered ep93xx-rtc as rtc1
root@ts72xx:~# cat /etc/modules
rtc-ep93xx
ohci-hcd
ts72xx_sbcinfo
rtc-m48t86
As you can guess, this is really wrong behaviour, because I've rtc1 as the
main time source for my system.
root@ts72xx:~# cat /etc/default/hwclock
HWCLOCKACCESS=yes
HWCLOCKDEVICE=/dev/rtc1
Expected behaviour with this patch applied:
Please wait: booting...
ep93xx-rtc ep93xx-rtc: rtc core: registered ep93xx-rtc as rtc0
usbcore: registered new device driver usb
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
...
rtc-m48t86 rtc-m48t86: rtc core: registered m48t86 as rtc1
rtc-m48t86 rtc-m48t86: battery ok
Starting udev
(From OE-Core rev: a0629aa0dc55829565b7ab1725875eac065ab2f1)
Signed-off-by: Petr Štetiar <ynezz@true.cz>
(based on http://patches.openembedded.org/patch/1917/)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The configuration chunks for profiling and latency top have
been enabled in tree now, so we can drop optional feature
additions in the recipe itself.
build tests show identical configurations.
(From OE-Core rev: 0f69382ac1eea1dea05581c29cf66e3214f0bd74)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In mirrors.bbclass we point into /pub but we don't in bitbake.conf.
All uses of KERNELORG_MIRROR look into /pub anyhow, so lets make
use of that.
(From OE-Core rev: 67a0c8f48b5ef2ae5fc712c9204e4e99818c8134)
Signed-off-by: Tom Rini <tom_rini@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing infrastructure uses an external build tree which references the
kernel source in the work dir. If run with rm work, building external modules
will fail.
This patch places a configured source tree in sysroots. Striking a balance
between minimal size and minimal maintenance is difficult. A fully configured
tree is about 500MB after a clean. This version leans on the side of caution and
removes only the obviously unecessary parts of the source tree to conserve
space, resulting in about 170MB. The arch directories would be some additional
pruning we could do. Given examples from the devel package from distributions, I
suspect this size could be reduced to 75MB or so, but at the cost of a much more
complex recipe which is likely to require a great deal more maintenance to keep
current with kernel releases.
Care is also taken to clean the hostprogs in scripts, and the modules are
responsible for building them as needed. Although it is unclear to me if this is
really necessary, especially considering that modules put these bits back as
soon as they compile. If we are not generating an sstate package, I suspect we
can ignore these.
Please try this with your modules and let me know how it does. I tried to take
non linux-yocto kernel recipes into account, but I have only tested with
linux-yocto and the hello-mod recipe so far.
(From OE-Core rev: a9d41062e24a6b99661b3a5256f369b557433607)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #858] and [YOCTO #859]
common-pc-64.scc in the linux-yocto meta data omits latencytop and profiling
(but common-pc.scc includes them). The right fix is in common-pc-64.inc, but
this fix gets people people unblocked until Bruce can commit the proper fix to
linux-yocto.
(From OE-Core rev: e906c6ea72b0edcc509a2ef5f44cba5584432dd1)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Oprofileui at http://labs.o-hand.com/oprofileui/ is not maintained now, so
we should change SRC_URI to the one maintained by the Yocto project. This
one includes new bugfixes.
This fixes [YOCTO #820]
[sgw: merged oprofile-git.inc back into .bb as suggested by Joshua]
(From OE-Core rev: d694c6700ee27672e5372939a98d5050cda44ca9)
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following patch creates a hello-mod recipe for building a trivial
out-of-tree kernel module, hello-mod.ko. This demonstrates the hostprogs
build modifications added to module.bbclass. When loaded and unloaded,
the module prints a simple string to the console to demonstrate it was
compiled correctly.
Tested on qemux86 poky-image-sato and beagleboard poky-image-minimal
(after adding hello-mod to the images).
(From OE-Core rev: d4765569d51448e8918bb15e7ab342983344074a)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [BUGID: 773]
This consolidated SRCREV update addresses the following items:
- updates to 2.6.37.2
- updates the routerstation pro configuration for USB mass storage
- merges the PERF no scripting patch into the kernel tree
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #488#734]
Enable audio for qemux86/qemux86-64 via the following kernel
configuration options.
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_ENS1370=m
CONFIG_SND_INTEL8X0=m
CONFIG_AC97_BUS=m
The mechanism to trigger these options is in the form of an
optional kernel feature that is only appended for qemux86
and qemux86-64, but is contained within the kernel tree.
This allows several things:
- the options to be available/shared for all boards
- the options to be in tree
- to not add the options to every board, which unecessarily
bloats the default configuration.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
linux.inc was used by older kernel recipes which have now been removed from the
core meta data. I references machines now only defined in meta-extras. The
configure prepend mangles the kernel .config in non-intuitive ways and the
install peroforms some odd boot image manipulation that is not used nor required
by supported machines. The required functionality, such as defconfig setup, has
already been moved to the kernel bbclass. Remove linux.inc to avoid confusion
for new kernel recipe authors and clean up the kernel meta data.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The one machine listed for this kernel recipe does not have a machine config.
This recipe uses some older mechanism which are being phased out. Remove it to
avoid confusion and clean up the kernel recipes metadata.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
These are all moving to meta-extras. Ideally in the future machines
such as these will be maintained to topic specific layers as we move
to a more layer oriented model. If this causes a problem for anyone
please discuss it on the mailing list.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A required run-time library was leaking into the -dev package.
This caused a large number of -dev packages to be included in the build.
This library is now part of the base lttng-viewer split.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
[BUGID #714] Added RPROVIDES_${PN}-dev and RPROVIDES_${PN}-dbg for
linux-libc-headers-yocto to provides "linux-libc-headers-dev" and
"linux-libc-headers-dbg" respectively.
This resolved the dependency issue of libc6-dev depending upon
linux-libc-headers-dev. Package linux-libc-headers-yocto-dev will be
installed as linux-libc-headers-dev.
Also bumped the PR.
Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Fixes [BUGID #719]
The common routines for handling a git based yocto kernel
are included from the lib headers recipe to checkout the
appropriate branch of the kernel for header generation.
linux-yocto.inc includes device tree installation rules
which typically apply to a kernel user of the include file,
but do not apply to a simple header generation. The fix is
to override the DTB variables in this recipe, which disable
the device tree installation rules.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
A number of the recipes did not properly label their pre and post
actions, causing the actions to occur in all split packages. This
was corrected by defaulting to _${PN} in most cases.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Linux is licensed under GPL so add appropriate LIC_FILES_CHKSUM to
linux.inc file.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new license processing rules error if dtc-native itself
doesn't have license information. Previously only the .inc
files contained this information, so we make a copy and leave
the existing license info to be removed pending further review.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #610]
The powerpc linux-yocto kernels were not creating dtb images
in the deploy directories. This was due to two problems:
- the dtb generation rules were not being configured
- the boards were not specifying a device tree in their config
This change addresses the first point by factoring out the
dtb generation routines into a new include that can be used by
multiple recipes.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
In order to build BSPs that were not already integrated into
the upstream linux yocto kernel AND keep the git fetcher happy,
some fairly complex anonymous python sections were required.
These sections cause problems with variable expansion and SRCREV
processing.
With the updated git fetcher code, we can streamline the BSP
boostrapping process and drop 99% of the anonymous python code.
This commit has the following changes to support BSP boot strapping
and simplication for existing BSPs.
- KMETA is set per-recipe rather than in python code
- undefined machines are no longer used, but instead common
branch names are set per-recipe
- fallback machine SRCREVs are present in the default revisions
file
- A new variable YOCTO_KERNEL_EXTERNAL_BRANCH should be set in
the local.conf for new BSPs instead of being programatically
determined in the anonymous python.
- No more explicity KMACHINE variable expansion and manipulation,
since the tools and build phases no longer require it due
to the per-recipe fallbacks.
Integrated/merged BSPs are unaffected by the changes and have been
regression tested.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
foo
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Support has been added for basic Beagleboard xM functionality,
including networking, to the linux-yocto kernel repository.
Tested on the Beagleboard xM.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating for the sugarbay and beagleboard BSPs. To make the sugbay
inhert common-pc-64 generic config/changes/fixes it has been
branched in the kernel as yocto/standard/common-pc-64/sugarbar, as
a result, we'll bump the common-pc-64 to be yocto/standard/common-pc-64/base.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #692]
Previously the information dumped by the kernel configuration audit
scripts was only placed in log files. This isn't as useful as it
could be, since they are rarely checked. This change takes the
output from kconf_check and explicitly displays it to the user.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
As the first of several changes to the kern-tools coupled to
the branch management in the yocto kernels the repository
is being renamed to it proper name. This change switches us to
that newly created repo.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
By default the linux-yocto recipes operate on the current branch
and use it as a trigger to locate the description of a board. This
model works well when using the git repo outside of a build system
since the commands can be simply invoked and will do something
useful. However, it does mean that you can't have two BSPs that
differ only by configuration, building out of a single branch
in the repository.
This means that you must have many branches for very similar
BSPs. This model is still preferred, but having the choice of
branching strategies is better.
With this change we can have multiple BSPs using a single branch
with the preferred description being hinted from the build
system by passing the $machine value to updateme/configme.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
All the libraries needs to be specified explicitely with the new gcc dso
linking change patch. This was causing build errors for this
recipe. Specifying the libXrender library explicitely for linking to
work without errors.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
With a change in gcc all the libraries needs to be specified explicitely
for linking. That breaks compile for this package as libm is not
explicitely specified. This commit fixes that linking issue.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
This package fails to build because of missing LIC_FILES_CHKSUM option.
This patch adds GPL and LIC_FILES_CHKSUM to this recipe.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Add systemtap, a general-purpose script-directed dynamic tracing and
performance analysis tool for Linux.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
ExtUtils::Embed ccopts is getting the host's -I/usr/local/include and
using it to compile perf, which results in a compilation error that
started appearing just recently.
This turns the code that makes use of ExtUtils::Embed off and simply
hard-codes NO_LIBPERL.
It does the same for LIBPYTHON while we're at it, since it probably
suffers from a similar underlying problem and just by chance hasn't
broken anything yet.
This will be re-enabled after I familiarize myself with the perf
recipe and am able to create a proper fix.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
The routerstation pro and mpc8315e-rdb have been validated
on 2.6.37 so we can switch their preference to linux-yocto
and update the machine compatibility to add them to the support
list.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Upgrade to 6c696cec3f264a9399241b6e648f58bc97117d49 which
includes fixes to the Makefile to allow for user override of
CC and AR via the environment as well as python SWIG wrapper
fixes.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
SRCPV is intended being used by PV, some recipes still use
SRCREV for PV, which is not correct. This patch fix all the
misusage.
Signed-off-by: Yu Ke <ke.yu@intel.com>
The trace-cmd source includes a graphical trace viewer, but we
don't want to make the trace-cmd recipe depend on gtk+. This
patch adds a second recipe in the meta/recipes-kernel/trace-cmd
directory which uses the trace-cmd SRCREV and RDEPENDS on trace-cmd
to ensure compatibility.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Richard Purdie <richard.purdie@linuxfoundation.org>
CC: Saul Wold <sgw@linux.intel.com>
The trace-cmd Makefile forces certain variables, such as CC and AR.
It was using the host gcc and loader, fix it to use the poky-built
cross-compiler and linker.
inherit pkgconfig to ensure we don't use the host pkg-config.
Remove unecessary variables from the oemake commands, such as ARCH
and LD which aren't used by the Makefile.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
For these recipes the dependencies listed in RDEPENDS and RRECOMMENDS only apply to ${PN}
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Fixes [BUGID #581]
When PARALLEL_MAKE is used with the current blktrace Makefile, the
btreplay and btrecord object files can end up being built multiple
times in parallel, which occasionally causes the linker to pick up the
object files in intermediate and seemingly corrupt states, and causes
the spurious link errors in the bug report.
This fix restricts the recursive btreplay invocations to building only
btreplay or btrecord as appropriate, not both.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
As the yocto-kernel advances, the libc headers must also
advance. This commit fixes the SRC_URI and SRCPV to work
properly with the latest linux-yocto kernel. It also switches
the qemu* targets to prefer this libc recipe.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The mapping of qemu to kernel branch name for the stable
kernel had a small leak from the devel kernel. Nothing
broke since qemux86 prefers the 2.6.37 kernel and this was
hidden.
This fixes the mapping for anyone who does want a 2.6.34 based
qemux86 kernel.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The existing 2.6.34 kernel tree uses _ where poky typically
uses -. This is a historical artifact, since working with
gnu Make and shells means avoiding - is wise. The opposite
is true in Yocto.
To avoid using the _ reserved character wherever possible
we can simply remove it from the branch names in the
new 2.6.37 kernel, but to keep the content stable in the
0.9 2.6.34 kernel, we map _ to - for the purposes of
packaging.
To further faciliate this switch, the branch names no
longer need to be shortened in the KMACHINE mappings, but
can be fully specified and the tools/processing adapt as
required. This gives us the flexibility to map multiple
boards to a single branch for building.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
During the last phase of the recipe factoring, the board compatibility
lists ended up in the wrong place, which meant we had an incomplete
list of boards, and the same set of boards for both kernels (stable
and devel).
To fix this, I've yanked the compatibility to the recipes themselves and
updated the emenlow to have a -stable bbappend.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Modify linux-libc-headers-yocto to use the common linux-yocto
routines, so headers exported to userspace will track the
branches in the yocto kernel git repository.
This commit also switches supported boards to prefer the
yocto libc headers.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
In order to extend and create more kernel recipes based on the
supported yocto kernel common routines need to be placed in
re-usable blocks.
To accomplish this meta/recipes-kernel/linux/linux-yocto_git.bb
is broken into three parts:
- meta/classes/kernel-yocto.bbclass: contains common routines
for checking out and configuring a yocto kernel git repository.
This should be inherited by recipes that need this functionality.
- meta/recipes-kernel/linux/linux-yocto.inc: Contains the machine
mappings, compatibility, build directives and common task
definitions for a yocto kernel based recipe. This inherits
kernel-yocto, and is the typical point of entry for other recipes.
- meta/recipes-kernel/linux/linuux-tools.inc: tasks and function definitions
for kernel recipes that want to build/export perf
It also updates the linux-yocto recipe to default to 2.6.37.
As part of the update to 2.6.37 the branch naming and conventions
have been modified to show inheritance, and be more generic.
For example:
master
meta
yocto/base
yocto/standard/arm_versatile_926ejs
yocto/standard/base
yocto/standard/beagleboard
yocto/standard/common_pc/atom-pc
yocto/standard/common_pc/base
yocto/standard/common_pc_64
yocto/standard/fsl-mpc8315e-rdb
yocto/standard/intel_atom_z530
yocto/standard/intel_core_qm57_pch
yocto/standard/mti_malta32_be
yocto/standard/preempt_rt/base
yocto/standard/preempt_rt/common_pc
yocto/standard/preempt_rt/common_pc_64
yocto/standard/preempt_rt/intel_atom_z530
yocto/standard/preempt_rt/intel_core_qm57_pch
yocto/standard/qemu_ppc32
yocto/standard/routerstationpro
In this structure:
master: tracks the mainline kernel
meta: meta information for the BSPs and kernel features
yocto/base: baseline kernel branch
yocto/standard/base: 'standard' kernel, contains features
and configs for all BSPs
yocto/standard/<machine>: represents a BSP with specific
features or configurations
The tools, tree and libc-headers have all been updated to
deal with this new structure. Also in addition to dealing with
the new structure, they continue to work with the existing
tree and will adapt at runtime to the differences.
The linux-yocto-stable_git.bb recipe continues to build the
2.6.34 based tree,and linux-yocto_git.bb builds 2.6.37. As
boards are enabled for the new kernel they will move from
-stable to the development kernel. As of now, only the
emulated targets have moved to 2.6.37-rcX
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Add Public Domain license file as a patch, and add checksum to bb file
[sgw@linux.intel.com: fixed the license text and the checksum]
Signed-off-by: Mei Lei <lei.mei@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Get md5sum of COPYING.MIT file which under the meta directory, because this recipe is a local recipe, so we need to find the license file under the meta.
Import a new varible "L" to record the license file path. [sgw@linux.intel.com: removed]
[sgw@linux.intel.com]: remove changes to insane.bbclass and bitbake.conf, use the ${POKYBASE} variable instead.
Signed-off-by: Mei Lei <lei.mei@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
This is the next stage of recipe reorganization, in this stage
many recipes where moved to a new meta-demoapps layer since this
is more appropriate for demo usage then the core. Additional some
recipes were moved to meta-extras to indicate they may be depercated
at a future time.
A number of recipes were modified since dependencies need to be
corrected.
Signed-off-by: Saul Wold <Saul.Wold@intel.com>
The upstream code has changed, and it does not need these fixes
anymore.
Removed these patches:
hayes-gone.patch
ppc_glibc_build_fix.patch
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
The existing preferred yocto kernel wasn't named appropriately
and needs to be updated.
In keeping the changes small and isolated, this commit simply
renames the recipe and some internal variables. Future commits
will refactor the code into more usable blocks.
Now that linuy-wrs has been renamed linux-yocto, we need
to rename and update an board configurations and append
files.
Now that linux-wrs has been renamed linux-yocto, we need to
update the SRCREVs to have the new name.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
When creating a new BSP there isn't always an upstream branch
to validate SRCREVs against. Therefore, creating a new BSP
required extra manipulations of the git repository, even though
the branch for the build would be dynamically created.
To fix this, provide a fallback to the 'standard' branch if
WRMACHINE is not assigned a specific value for the given MACHINE.
The fallback saved in KBRANCH, and represents the branch that
we should build, even if no fallback is required. Some substeps
of the recipe have been updated to use KBRANCH rather than
enforcing MACHINE-KERNELTYPE.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
It is useful to override revision checking from a layer or other
recipe. In order to show the global nature of the variable rename
it KERNEL_REVISION_CHECKING and make it a weak assignment.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #199]
Although an optional feature to a base BSP, most of the machines
currently supported want/need the netfilter options. To enforce
this configuration, it is temporarily forced in the kernel
recipe itself, but can move to machine configurations in the
future.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #199]
Reinstate the ability to specify optional/additional kernel features
when updating the tree.
This is done via the variable KERNEL_FEATURES which specifies
a list of features to be appended to the current branch and
config. These features are part of the wrs_meta branch in the
kernel repository and hence are self contained within the
kernel tree waiting to be activated. This saves multiple
branches simply to allow a machine to have many profiles.
The kernel patching/configuration phases will locate these
features and add them to the meta_series, which in turn
modifies the tree.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The emenlow didn't have the default 8250 serial ports.
Including the common serial config fragment fixes this
problem.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #432, #438, #437, #422]
[atom-pc: switch to the atom-pc branch
The atom-pc has a dedicated branch and merged kernel commits.
Swtich the kernel recipe to use the fully integrated BSP
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>]
[atom-pc: add kernel config options needed for -live images
Fixes [BUGID #432]
Live images require VFAT filesystem and loop device support - this
adds the required kernel config options for them.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>]
[atom-pc: Add netbook wireless networking support for NB305 and eee901
Add the atom-pc-wifi.cfg to enable wireless networking support for the netbooks
mentioned in the atom-pc machine config file.
Note: this adds a staging tree driver (rt2860sta) for the eee901 wifi.
[BUGID #438]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Richard Purdie <rpurdie@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>]
[atom-pc: Add netbook wired networking support for NB305, Aspire One, and eee901
Add the atom-pc-eth.cfg to enable wired networking support for the three
netbooks mentioned in the atom-pc machine config file.
[BUGID #437]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Richard Purdie <rpurdie@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>]
[routerstationpro: add missing kernel patches
[BUGID: #422]
Add the kernel patches required for routerstaion pro boot
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>]
[netbook: allow hardisk booting
[BUGID: #445]
Signed-off-by: Darren Hart <dvhart@linux.intel.com>]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The atom-pc has a dedicated branch and merged kernel commits.
Swtich the kernel recipe to use the fully integrated BSP
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
[BUGID #363]
Integrate the x86 gfx options into the existing x86 graphics
options for the common_pc and common_pc_64 boards.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
BUGID: 421
Create the infrastructure to build the beagleboard against the
linux-wrs kernel.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
BUGID: 423
Introduce the basic mpc8315e BSP. By default this BSP uses
the basic 603 tuning and soft-float. There are issues with
the e300 tuning and eglibc, and the compiler. Subsequent
commits will further tune this BSP.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
BUGID: 422
Add the machine configuration and kernel infrastructure for building
the routerstation pro BSP.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Init scripts assume uvesafb as module, and also need CONFIG_FRAMEBUFFER_CONSOLE
to set some mode parameter, else wrong parameter cause psplash's mmap failure.
This is just a quick fix as we don't know how to change the wrs kernel config
in a clean way. Should revert it with clean way of changing.
[BUGID #363] fixed by this
Signed-off-by: Tian Kevin <kevin.tian@intel.com>
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Add CONFIG_FRAMEBUFFER_CONSOLE to the i915.cfg config fragment for
the atom-pc machine. This allows the BlackSand to boot to the sato
desktop with text after the fb switch as well as the poky splash
screen.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Richard Purdie <rpurdie@linux.intel.com>
Add the option of using linux-wrs as the kernel provider for atom-pc. This
patch uses poky to apply config fragments to the common_pc-standard branch
of the linux-wrs kernel. A follow-on patch will remove these once linux-wrs
has an atom-pc branch and the config fragments are present in the kernel
repository.
This configuration boots to a prompt on the BlackSand, but panics unable
to find the root partition on the Toshiba NB305 where the "rootwait"
kernel boot option appears to be being ignored.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
In preparation for the more generic atom-pc, rename the netbook machine and all
the relevant overrides. Leave the linux-netbook kernel recipe intact and as the
default kernel for the atom-pc machine. A future patch will convert this over
to linux-wrs and likely remove the linux-netbook kernel recipe.
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Fixes [BUGID: #390]
The custom de-checkpoint routines used in createme/patchme
destroyed data each run. This meant that incremental and
expermental work couldn't be done directly in the kernel source
tree itself. Using the more robust kgit-checkpoint allows that
data to be persistent (until a clean is done).
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #388]
Even if we aren't creating the branch from scratch, it is possible
that it has never been patched before. So let's make sure the
infrastructure for patching is always in place.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Currently default header is linux-libc-header, which leads the dismatch
with wrs kernel.
The different headers for same file cause trouble between kerenl module and
user level binary. E.g. segfault in v86d due to different
CONNECTOR_MAX_MSG_SIZE in connector.h from the one used by uvesafb.
This fix is work around to sync with wrs kernel headers, and should be removed
after switching to linux-libc-headers-wrs.
[BUGID #279] fixed by this.
Signed-off-by: Zhai Edwin <edwin.zhai@intel.com>
Part of [BUGID #373]
In order to generate BSP definitions for new boards, we need
to know the architecture. So we'll arrange to pass it to
updateme.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #372]
If for some unknown reason, the kernel git repository hasn't been properly
updated and is *older* than the revisions listed in default-revisions the
branch sanity checking kicks in and tries to force branches to the right
revs. The problem is, the revisions it is looking for don't exist in the
tree. As a result, error messages are thrown about invalid commit IDs.
These aren't helpful, and are simply confusing for the user.
Instead we can test for the commit ID, and if it isn't valid, indicate
that the commit ID isn't valid and that the tree is potentially out
of sync.
This situation is not common, but it is an easy test and the extra
sanity checking is useful.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fix for unresolved libelf error when running perf:
perf: error while loading shared libraries: libelf.so.1: cannot open
shared object file: No such file or directory
Signed-off-by: <tom.zanussi@intel.com>
Signed-off-by: <bruce.ashfield@windriver.com>
* Add binary devicetree generation support
* Taken from OE
* v2 reorder patch set
* v3 remove package_stagefile_shell
* v4 rename devicetree_image function to install_append
* remove pkg_postinst_kernel-devicetree,
pkg_postrm_kernel-devicetree functions
* Update KERNEL_DEVICETREE_FLAGS use "-p" option instead
of "-S" which is deprecated
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
It is possible for the git repository to have commits on branches
that are ahead of the SRCREVs for those branches. Since the
kern tools will simply checkout and build, we can end up building
a different kernel than what is expected.
It is up to the recipe to ensure that the branches are at the
correct commits. To do this, we simply check the current machine
branch against the SRCREV and if they don't match we move the
existing branch and do a checkout at the desired commit.
Note: This probably needs to be disabled with AUTOREV.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
By defining the perf package in the shared kernel class bitbake will be able to
find the package provider even when the preferred kernel doesn't build perf,
preventing dependency resolution failures.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Updating the SRCREVs for the recent port of bug fixes for all boards
and the integration of qemux86-64 config and connector changes.
Now that the qemux86-64 changes are in tree, we can drop them from
the linux-wrs recipe.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Khem Raj
Bruce Ashfield
Richard Purdie
Tom Zanussi
Darren Hart
Stefan Herbrechtsmeier
Martin Jansa
Lianhao Lu
Saul Wold
Scott Garman
Paul Eggleton
Andreas Oberritter
Jeff Lance
Wade Farnsworth
Joshua Lock
Shane Wang
Zumeng Chen
Liming Wang
Andrea Adami
Steve Sakoman
Nitin A Kamble
Dexuan Cui
Elizabeth Flanagan
Matthew McClintock
Koen Kooi
Zhai Edwin
Dongxiao Xu
Yu Ke
Mark Hatle
Enrico Scholz
Anders Darander
Michael Lippautz
Phil Blundell
Adrian Alonso
Petr Štetiar
Tom Rini
Ilya Yanok
Gary Thomas
Richard Purdie
Qing He
Mei Lei
Saul Wold
Kevin Tian
Tom Zanussi
Adrian Alonso