The new --addditional-layers parameter takes a list of layer
directories and adds them to the build configuration before starting
testing. The resulting base configuration then more closely matches
a full distro.
This is relevant in two cases:
1. some layers like meta-freescale dynamically enable more recipes
in their layer.conf depending on which other layers are active,
so testing only against OE-core might miss problems which occur
only when also some other layers are active
2. BSP layers might be fine in combination with machines from
OE-core, but might break in combination with some other machines
As before, test_signatures only warns about signature changes
introduced by the layer which is under testing, and not those changes
introduced by the additional layers.
(From OE-Core rev: 0e8528f7c6201e8a5d2799123241c0e1b85081ce)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
locked-sigs.inc groups tasks according to their tune flags (allarch,
i586, etc.). Also retrieve that information while getting signatures,
it will be needed to determine when setting a machine changes tasks
that aren't machine-specific.
(From OE-Core rev: 67f9a8759f47680dbf349797801b2a1e8d149377)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After filtering out potential false positives, it becomes feasible to
include the output of bitbake-diffsigs for those tasks which
definitely have a change.
Depends on bitbake-diffsigs with the "--signature" parameter.
Enhanced output now is:
AssertionError: False is not true : Layer meta-xxxx changed 120 signatures, initial differences (first hash without, second with layer):
gstreamer1.0-plugins-base:do_fetch: 76973f19f2e30d282152bdd7e4efe5bb -> e6e7c6fa9f2bd59d7d8d107f7c6ca1ac
Task dependencies changed from:
['PV', 'SRCREV', 'SRC_URI', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]', 'base_do_fetch']
to:
['GST_IMX_PATCHES_TO_APPEND', 'PV', 'SRCREV', 'SRC_URI', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]', 'base_do_fetch']
basehash changed from d679d30bd1ea41c56e57419b57587f3c to 090a79b45f5fa26d10f9d34e2ed7a1e6
List of dependencies for variable SRC_URI changed from '{'PV', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]'}' to '{'GST_IMX_PATCHES_TO_APPEND', 'PV', 'SRC_URI[md5sum]', 'SRC_URI[sha256sum]'}'
changed items: {'GST_IMX_PATCHES_TO_APPEND'}
Dependency on variable GST_IMX_PATCHES_TO_APPEND was added
Variable SRC_URI value changed:
" http://gstreamer.freedesktop.org/src/gst-plugins-base/gst-plugins-base-${PV}.tar.xz file://get-caps-from-src-pad-when-query-caps.patch file://0003-ssaparse-enhance-SSA-text-lines-parsing.patch file://0004-subparse-set-need_segment-after-sink-pad-received-GS.patch file://encodebin-Need-more-buffers-in-output-queue-for-bett.patch file://make-gio_unix_2_0-dependency-configurable.patch file://0001-introspection.m4-prefix-pkgconfig-paths-with-PKG_CON.patch file://0001-Makefile.am-don-t-hardcode-libtool-name-when-running.patch file://0002-Makefile.am-prefix-calls-to-pkg-config-with-PKG_CONF.patch file://0003-riff-add-missing-include-directories-when-calling-in.patch file://0004-rtsp-drop-incorrect-reference-to-gstreamer-sdp-in-Ma.patch [--] {+${GST_IMX_PATCHES_TO_APPEND}+}"
pulseaudio:do_install: 6bb6fe23e11a6d5fef9c3a25e73e4f9c -> 3f54ea75673a792e307197cfa6ef2694
basehash changed from ac4efcfa783bd04a5a98a2c38719aedd to 37679d99623a37c8df955da3a01415a5
Variable do_install value changed:
@@ -1,3 +1,7 @@
autotools_do_install
install -d ${D}${sysconfdir}/default/volatiles
install -m 0644 ${WORKDIR}/volatiles.04_pulse ${D}${sysconfdir}/default/volatiles/volatiles.04_pulse
+ if [ -e "${WORKDIR}/daemon.conf" ] && [ -e "${WORKDIR}/default.pa" ]; then
+ install -m 0644 ${WORKDIR}/daemon.conf ${D}${sysconfdir}/pulse/daemon.conf
+ install -m 0644 ${WORKDIR}/default.pa ${D}${sysconfdir}/pulse/default.pa
+ fi
[YOCTO #11161]
(From OE-Core rev: 312edd42b6cc553de4d476c76e8e36a882e11cdd)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added new parameter 'api' to sparse_copy function to specify
underlying filemap API to use. By default sparse_copy will
try both available APIs.
Added test case for sparse_copy to wic test suite.
(From OE-Core rev: 88701cef6ba399e82f96ed1b0eef9a44ed8c1687)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, runqemu grep root=/dev/sd or root=/dev/hd on the image, and
would use vda if no grep result, now we have set QB_DRIVE_TYPE to
"/dev/sd" by default, and the device will be /dev/sda, so use sda to
replace vda in the test case.
(From OE-Core rev: 3f1f42984021d87ac43aaa16f38b706c2c965e02)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can use self.rootfs as self.nfs_dir when self.fstype is nfs, this can
reduce the code's complexity and we can re-use the code of checking
ROOTFS conflictions.
(From OE-Core rev: 1aafa13ae6faf620acac7338c42a8838e75da6b9)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed when the image is large and not enough memory:
grep: memory exhausted
Aborted
[YOCTO #11073]
(From OE-Core rev: a99deb30a0138594147ae28aab016fe4b74b8959)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we can get MACHINE and others from env vars and "bitbake -e",
"runqemu" can work without any arguments.
(From OE-Core rev: 9ebcb2b6f41420ae3686afad03bb26a68cfacf95)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use self.env_vars to support get vars from environment explicity. The
MACHINE, ROOTFS and KERNEL was supported by shell based runqemu, and
the help text says support them from env vars, so add them back.
[YOCTO #11141]
(From OE-Core rev: 20008d0bfe2cacecba77e11b0a0faf3d959eaf1e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move config/Makefile in libdir from core package to dev package for
python, because it is only needed in development process.
(From OE-Core rev: 8b55d055f046677c18eeaefe3ca18869eedeb14d)
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the code underpinning bitbake-diffsigs to add an option to
buildhistory-diff to determine and display the differences between the
actual signature inputs, with a twist - we collapse identical
changes across different tasks, showing only the most recent task to
have that difference, meaning that there's less noise to wade through
when you just want to know what changed in order to cause some
rebuilding you're seeing.
(From OE-Core rev: 86cb4b01f2020553902554e512c02147eb4e0f51)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having added writing out of the task signature list to buildhistory
(when BUILDHISTORY_FEATURES includes "task"), we now need a way to
compare the list. This just shows which tasks have been added / changed
signature / removed.
(From OE-Core rev: 63bd7e9f780a98dda458d612877495756bcc5463)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the cwd is named "buildhistory" and the user hasn't specified an
alternative path on the command line, then assume that the current
directory is the buildhistory directory. This makes it easier to run
buildhistory-diff and also interact with the buildhistory git repository
as you no longer have to jump into the buildhistory directory and up to
the parent again when doing so.
(From OE-Core rev: e4ccec2e4c2f521a2bb473083b42aefd494eea23)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This script appears broken and is actively breaking build directories.
For example, binutils-cross-i586 gets run do_fetch to do_populate_sysroot by:
$ oe-selftest -r devtool.DevtoolTests.test_devtool_virtual_kernel_modify
then:
$ oe-selftest -r oescripts.BuildhistoryDiffTests.test_buildhistory_diff
wipes out the contents of tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/
but does not wipe out the corresponding stamps, then:
$ oe-selftest -r runtime-test.Postinst.test_postinst_rootfs_and_boot
needs binutils-cross-i586:do_populate_lic and if and only if this is
unavailable from sstate, it fails since it thinks the source is already
unpacked when it isn't resulting in:
WARNING: binutils-cross-i586-2.28-r0 do_populate_lic: Could not copy license file /home/pokybuild/yocto-autobuilder/yocto-worker/nigh
tly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/git/COPYING3.LIB to /home/pokybuild/yocto-autobuilder/yocto
-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/license-destdir/binutils-cross-i586/COPYING3.LI
B: [Errno 2] No such file or directory: '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-l
inux/binutils-cross-i586/2.28-r0/git/COPYING3.LIB'
ERROR: binutils-cross-i586-2.28-r0 do_populate_lic: QA Issue: binutils-cross-i586: LIC_FILES_CHKSUM points to an invalid file: /home/
pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/build/tmp/work/x86_64-linux/binutils-cross-i586/2.28-r0/git/COPYING3 [license-checksum]
and similar errors.
Its safer for users to wipe tmp than try and maintain scripts which try
to remove pieces of tmp and get it wrong so remove the script.
(From OE-Core rev: 809b23c829f352c0eae455ea89f53e2a9ee87f06)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use properly formatted fallback email address instead of just the
username.
(From OE-Core rev: 5e07504d7a74f0641e2a374b9d12590ce9c9cc89)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make it possible to provide (extra) command line arguments to the
oe-build-perf-test-email script via a new environment variable
OE_BUILD_PERF_REPORT_EMAIL_EXTRA_ARGS.
(From OE-Core rev: 9cdd4ea5e006fe326bdf39ea437b9ba61a66b778)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The http.server module from python3-netclient imports the html module
which is in python3-html. Also xmlrpc.server imports pydoc which is a
part of python3-pydoc. But those run-time dependencies are missing
from python3-netclient and python3-xmlrpc respectively.
Add the missing run-time dependencies.
(From OE-Core rev: 8e30b726c44f873e5fd9d3f36c3464a29b97abd8)
Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Typically a single change cascades through the entire task dependency
chain. Developers had to figure that out themselves, based on hard to
read and interpret output (not sorted, no indention, no explanations):
$ yocto-compat-layer.py -n meta-xxxx
...
AssertionError: True is not false : Layer meta-xxxx changed signatures.
webkitgtk:do_install changed fe2edc9082bc0da98f9cb1391c52f565 -> b3a44684c5cd9aacd3f7c6ed88eefab5
gstreamer1.0-plugins-good:do_configure changed 3b2f8211be3fe08422bf6087f3af16d1 -> 7d80e42fa1f4f01ff4dfe2ea4477d382
pulseaudio:do_package_qa changed 5d0a58ada66ff17f5576555302ac319a -> 0e13bcb96143d1ae54c451bc3de0aa30
epiphany:do_prepare_recipe_sysroot changed 29e1b277dbcb005bd54950594c50d91b -> d3c45527b37677a0668ce483c6db3052
...
gst-player:do_packagedata changed 9ce6efdd357dd74919bc4957458b1e95 -> d0c083ce629f37adfc9c4ba9eff81f83
gstreamer1.0-plugins-base:do_install changed 1161cd867d15bea63e5dd5d9abf0519c -> 5bf2b652a2d77fee3eedb35af2f201a0
gstreamer1.0-rtsp-server:do_packagedata changed 6781dc3070f80b843ed1970d74dd323e -> 454620c2e3b9fea87e525d14b6ed0344
alsa-plugins:do_packagedata changed 1808c3f737cb805b169d004e948ea19c -> 480124b7fa5eab1f73bf96440d725231
Now the tool automates the problem analysis: it retrieves the depgraph
using the tinfoil API and only reports those tasks with modified
signatures whose dependencies have not changed, i.e. those tasks which
definitely introduce a change.
>From the previous example, that just leaves two tasks that need to be
checked:
AssertionError: False is not true : Layer meta-xxxx changed 120 signatures, initial differences (first hash without, second with layer):
gstreamer1.0-plugins-base:do_fetch: 76973f19f2e30d282152bdd7e4efe5bb -> e6e7c6fa9f2bd59d7d8d107f7c6ca1ac
pulseaudio:do_install: 668eb1e30af129df9806b0aa0d7c10cd -> 1196bdb88eef56eeee4613bb06b9387e
This pruning might be a bit too aggressive in the sense that tasks
which inherit a change and then add more changes themselves won't be
reported initially. They will be found when fixing the reported tasks
and re-running the check.
For a developer it seems better to have something listed which
definitely is a problem and needs fixing instead of everything,
including the tasks which don't need fixes.
(From OE-Core rev: 7ab0e09de75bfd7e7498bfa72d1f2f5d02a96747)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In commit 5b9ac62ab535d, one place was fixed where a command was
invoked such that failures caused double stack traces and stderr was
lost. The same problem also occurs elsewhere, triggered for example by
a layer with parsing problems.
Now a new utility method is used instead of repeating the code.
(From OE-Core rev: b6c72c0d169473e2626938be2ee59f850624612e)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sending report email was not working correctly if the script was given
an html report path that contained directory components.
(From OE-Core rev: 1da641661bb5963fcbd7ac2c20bc997c3eae6f18)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The DEPLOY_DIR_IMAGE maybe relative or absolute path since it can be
read from env vars, so use realpath for both imgdir and
DEPLOY_DIR_IMAGE when compare.
(From OE-Core rev: dad9f27278850d0d3818344fea877835632576cb)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* "is it" -> "it is"
* Remove "<image>.qemuboot.conf =" in the error message which looked strange.
(From OE-Core rev: a6152dd9f6f4e17855548ceffa8d864855a67f5c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using `wic create mkefidisk -e core-image-minimal', the following
error message appeared.
Please bake it with 'bitbake parted-native' and try again.
However, following this command doesn't do any help. The same problem
still appeared.
The problem is that when we 'bitbake parted-native', it doesn't have
anything to do with core-image-minimal. And the required tool 'parted'
is not under core-image-minimal's recipe-sysroot-native directory.
Improve the error message so that following it could get things done.
(From OE-Core rev: f0425c0a0f1c98f65bf61fd9aa7e023ed41a35fa)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FIEMAP API is not supported by tmpfs file system, but
SEEK_HOLE/SEEK_DATA is supported.
Returned back FilemapSeek class that implements support
of SEEK_HOLE/SEEK_DATA API to make sparse_copy API working
on tmpfs again.
This reverts commit 6b80c13f7a.
(From OE-Core rev: e75bd6a7dd5c1b4bad039c35cf4a2ffc2f77c60a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add new '-E' command line option for sending an email report to
specified recipient.
(From OE-Core rev: 46e76ffd460933ab35da4cfd3509f7c5de5ecd93)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implement new '-P' option for spefifying a Git remote where to push
results after committing to a local Git repository.
(From OE-Core rev: d8e14df29d28bfe805dc746f43c9f3a7726e57ce)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Test of the exit code was accidentally moved to wrong place when
oe-git-archive was taken into use.
(From OE-Core rev: ed43b2dfe019f35086967a0c8dc605bc6629c75b)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Support <branch>:<commit> format for the -c argument. This makes it
possible to test older commits of a certain branch (not just the tip of
it) so that the branch name will still be correctly recorded in the test
report data.
(From OE-Core rev: be3d1718a99e59e636f349586e0a64eb8e2824a4)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The javascript console log messages are used in scraping, when
converting an html test report to html email. Before this patch a
console message indicating that all charts have been drawn was not
correctly sent if the last test failed (or didn't have chart data for
some other reason) which, in turn, caused oe-build-perf-report-email.py
script to fail with a timeout.
(From OE-Core rev: 79b90ae02257002ea831a48f6798794b7711c1f8)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When getting info from the latest commit, don't search all refs but only
branches. We don't get correct data from refs/tags/* or refs/notest/*,
for example.
(From OE-Core rev: f84d0bd7deb4c19fdb1e821b3a50e8c8f54a731b)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initial signatures need to be collected -after- the dependency layers have
been added to the system. Otherwise changes that happen due to dependencies,
outside of the layer being scanned, will show up as signature problems.
The add_layer function was split into two pieces so that we can process
the dependencies first, and then add the layer itself for the comparison.
(From OE-Core rev: 4eb0932e755b7cb582a8db811aeed1397ecb92cc)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When processing a layer for dependencies, you have to process the layer
itself, it's dependencies, the dependencies dependencies and so forth until
all items have been processed.
i.e.: LayerA requires LayerB requires LayerC requires layerD
The end result should be LayerB, LayerC and LayerD are all dependencies of
LayerA.
(From OE-Core rev: 6e0a268b750fb6701604dd936cd2cf3b47a6e804)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When processing a large number of items, there are times that it would be
nice to be able to pass in a series of layers that can be used as dependencies
for the layer that is being scanned. This avoids the significant overhead
of processing all of the layers to compatibility.
(From OE-Core rev: 57fc8a9771174b7d0533a42c045053adefa537a8)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If items were skipped because the dependencies could not be found, we
want to record this was skipped so we can display it later.
(From OE-Core rev: 402ef1c8bd1ea994581a39672f31ab1203a0899d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This script will be used to create it's own build directory to make
runs of yocto-compat-layer.py againts layers isolated.
Example:
$ source oe-init-build-env
$ yocto-compat-layer-wrapper LAYER_DIR LAYER_DIR_N
[YOCTO #11164]
(From OE-Core rev: 9414382f96d4a5d81cca440c75140950ca515aab)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only change the ownership of ${libdir}/gio/modules/giomodule.cache if
it exists.
(From OE-Core rev: df2e1a8fbadffac0f1781a0d07e050356a007327)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
devtool/runqemu.py was relying on STAGING_BINDIR_NATIVE to find the host
tools it needed like qemu-system-<arch>. In the post RSS world, this no
longer exists. This patch points it to
{STAGING_DIR}/{BUILD_ARCH}/{bindir_native}.
[YOCTO #11223]
(From OE-Core rev: 1910f9e9336bfedc8278a3bc02e7e7f934a4fc86)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-find-native-sysroot: Recipe Specific Sysroots have eliminated the
large STAGING_DIR_NATIVE. Now, we will rely on the meta-ide-support
sysroot that is what was populating the large STAGING_DIR_NATIVE in
previous versions anyway. We now look for RECIPE_SYSROOT_NATIVE.
[YOCTO #11119]
(From OE-Core rev: d8b4c58676705e9749347be0e8f191ccccc37f05)
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Script for sending build perf test reports as an email. Mangles an html
report, generated by oe-build-perf-report, into a format suitable for
html emails. Supports multipart emails where a plaintext alternative can
be included in the same email.
Dependencies required to be installed on the host:
- phantomjs
- optipng
[YOCTO #10931]
(From OE-Core rev: 9e97ff174458f7245fc27a4c407f21a9d2e317ab)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new tool for pretty-printing build perf test results stored in a Git
repository. The scripts is able to produce either simple plaintext
report showing the difference between two commits, or, an html report
that also displays trendcharts of the test results. The script uses
Jinja2 templates for generating HTML reports so it requires
python3-jinja2 to be installed on the system.
[YOCTO #10931]
(From OE-Core rev: 3b25404f0f99b72f222bdca815929be1cf1cee35)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reference url is a stale, non existent site that returns a 404, so get rid of it
Change impacts both the manifest files and the scripts that generate the manifests
Run the following from within recipes-devtools/python
../../../scripts/contrib/python/generate-manifest-2.7.py > python-2.7-manifest.inc
../../../scripts/contrib/python/generate-manifest-2.7.py -n > python-native-2.7-manifest.inc
../../../scripts/contrib/python/generate-manifest-3.5.py > python-3.5-manifest.inc
../../../scripts/contrib/python/generate-manifest-3.5.py -n > python-native-3.5-manifest.inc
(From OE-Core rev: ae13f580b759211c1a6b59a276f75d589f1db11c)
Signed-off-by: Bob Cochran <openembedded@mindchasers.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we do not set the 64 bit flags, newer kernels seem to build 64bit
config files by default. This is due to a hard-coded uname -m check that
selects the KBUILD_DEFCONFIG based on the host, not the cross target.
Similar to e9ec769926b2378e63380bd7762ce7ce201af151 in the yocto-kernel-cache repo
(From meta-yocto rev: e35017cc67f6d3c5cc00488d3460de0dcec773b3)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's a typo.
(From OE-Core rev: 1271d50e622cb3a0eef662de7112da04f05ef5bb)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These parameters are copied from the ext image class.
-D will let fsck perform further directory optimizations
-v might be helpful for debugging purpose
(From OE-Core rev: be93e378506a85772503005294503cfc348a552c)
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is not much sense in creation of empty squashfs
partition. It's also not possible to create empty squashfs
partition of specified size.
Even more, prepare_empty_partition_squashfs method is
absolutely broken. It raises exception when called and
even its signature differs from the rest of of similar
methods. It means that nobody uses it and it's safe
to remove it.
Removed prepare_empty_partition_squashfs method and
testing of empty squashfs partition.
(From OE-Core rev: 9152960f250cb4df1e559d747fb09005675a0d75)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added vfat and msdos to the list of supported fstypes in
'wic help kickstart' output.
[YOCTO #11137]
(From OE-Core rev: ab7f2a77e124d8859002619e7ba3117e8a165df7)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly set system id 0x6(FAT16) for msdos partitions.
Removed old code that attempts to achieve the same result
using 'parted ... lba off'.
(From OE-Core rev: 230452faf151e277bfb2b49526923f8097755b35)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used '-F 16' parameter for mkdosfs to create FAT16 partitions for
'msdos' partition type.
[YOCTO #11137]
(From OE-Core rev: b6243a03ced9a719a5801afcee014b03313cc43c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly
Ed Bartosh
Robert Yang
Li Zhou
Paul Eggleton
Richard Purdie
Markus Lehtonen
Dmitry Rozhkov
Chen Qi
Mark Hatle
Aníbal Limón
Peter Kjellerstedt
brian avery
Bob Cochran
Saul Wold
Daniel Schultz