By default the linux-yocto recipes operate on the current branch
and use it as a trigger to locate the description of a board. This
model works well when using the git repo outside of a build system
since the commands can be simply invoked and will do something
useful. However, it does mean that you can't have two BSPs that
differ only by configuration, building out of a single branch
in the repository.
This means that you must have many branches for very similar
BSPs. This model is still preferred, but having the choice of
branching strategies is better.
With this change we can have multiple BSPs using a single branch
with the preferred description being hinted from the build
system by passing the $machine value to updateme/configme.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating beagleboard SRCREV to pickup:
commit 8e15b884ecf768fd9f898da5acf24938dfe81a83
Author: Koen Kooi <koen@beagleboard.org>
Date: Tue Jan 11 17:13:35 2011 +0000
omap3: beaglexm: fix EHCI power up GPIO dir
commit a5624323866c06156ca548b8515d9347fdd5188e angstrom-linux
EHCI enable power pin is inverted (active high) in comparison
to vanilla beagle which is active low. Handle this case conditionally.
Without this fix, Beagle XM 4 port EHCI will not function and no
networking will be available
[nm@ti.com: split up, added descriptive changelogs]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Koen Kooi <koen@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating the meta branch to contain the latest crownbay
configuration tweaks.
e1f85a4 wrs_meta: turn on OHCI USB config option
8be8e45 wrs_meta (crownbay): turn on AHCI SATA option
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Bumping the SRCREV to pickup some missing functionality:
ebbca89 omap: Beagle: no gpio_wp pin connection on xM
671fd89 omap: Beagle: only Cx boards use pin 23 for write protect
dccdf8a omap: Beagle: revision detection
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Original we used absolute path in sysroot-destdir for both native and
target recipes. This commit changes target recipes to use relative path
which is same as the image directory.
[sgw: merged with libtool sysroot work]
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
In preparation to remove the u-boot-omap3 recipe, update the overo
machine to use the new upstream u-boot recipe.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
The Beagleboard xM requires x-load and u-boot to be installed
on the MMC as it has no NAND (as of rev B and onward).
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
uboot-omap3 appears to be fairly stale (last commit in April 2010) while
the upstream u-boot is making regular tagged releases. Add a new recipe
using the upstream u-boot repository.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
TI is now maintaining an upstream x-loader git repository and
sakoman will no longer be maintained. Current upstream
includes signGP and incorporates it into the Makefile. The new
Makefile ift target builds the universal MLO binary. The armv7-a
patch is included.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
The linux-yocto-rt kernel has been boot tested on qemux86-64. Unlock
the preferred provider for virtual/kernel so it can be selected and
used.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Add systemtap, a general-purpose script-directed dynamic tracing and
performance analysis tool for Linux.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
To reduce the time on sanity testing, we remove variable SHARE_IMAGE and use
a new variable TEST_SERIALIZE in local.conf. It is by default set to 1. Poky
will copy and boot the to-be tested image for only once. It will not remove
or kill the image and test cases will be serialized executed against the same
image. If it is set to 0, image is always be copied for each cases, which takes
much time. I had a experiment that latest qemuppc sato only takes 7 minutes to
finish 9 sanity test cases, which takes more than 20 minutes before.
I also removed sanity case "boot" from sato/sdk/lsb because the other cases for
these targets already cover the check point of "boot".
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
Enable beagleboard support for 2.6.37. The only non-kernel related
change for the board is to update the serial console designation.
The Beagleboard use omap serial driver, so we replace ttyS2 with ttyO2.
This is described in following link:
http://www.mail-archive.com/linux-omap@vger.kernel.org/msg40838.html
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Update pseudo to the latest version to resolve a number of optimization defects.
The problems were present on both 64-bit and 32-bit systems, but generally only
caused issues on 32-bit hosts.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
The latest mesa 7.10 has dependency on GPLv3 library talloc, so it is still necessary to keep one old non-GPLv3 mesa.And the latest non-GPLv3 version is mesa 7.8.2, so this patch add it.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- update license checksum due to commit "COPYING: add three missing authors listed in synaptics.c". the license type is unchanged.
- Pass correct "sdkdir" value for cross compiling
Signed-off-by: Yu Ke <ke.yu@intel.com>
- update license checksume due to the commit "COPYING: replace stub with actual copyright notice". it provide more accurate license info. the license type is unchanged.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- LICENSE_CHECKSUM changed due to the commit "COPYING: replace stub with copyright notices". this commit add more accurate license info, and the license type is still MIT-X.
Signed-off-by: Yu Ke <ke.yu@intel.com>
- LICENSE checksum changes due to that "Sun's copyrights now belong to Oracle". it is corp name change only, the license is still MIT-X.
Signed-off-by: Yu Ke <ke.yu@intel.com>
Currently gcc-runtime installs the files, but actually gcc-runtime's
do_configure checks if the files are available, so before we build gcc-runtime,
we should have some recipe install the files first! -- currently
gcc-cross-intermediate actually does that(gcc-cross also installs the files,
but it installs into the gcc-build-internal* directory), but
gcc-cross-intermediate will have its own sysroot in future, after that,
gcc-runtime won't build. So let us add this new target recipe and move the
installation of the files from gcc-runtime into it.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
The switch to KARCH meant that the arch arm settings were not
being applied to all boards. This commit adds the new option
along with the existing one to cover all boards.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating the SRCREV to capture this commit to the 2.6.34 kernel:
linux-2.6-windriver: atom-pc-preempt_rt meta-data
The following patch adds support for the preempt_rt kernel type
for the atom-pc machine. It should be applied to the wrs_meta
branch.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Enable the parameters required for systemtap for all BSPs based
off the standard kernel type.
CONFIG_KPROBES=y
CONFIG_RELAY=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fixes [BUGID #595]
Because of the QEMU booting slowness issue(see bug #646 and #618), autobuilder
may suffer a timeout issue when running sanity test. We introduce variable
SHARE_IMAGE here to fix the issue. It is by default set to 1. Poky will copy
latest built-out image and keep using it in sanity testing. If it is set to 0,
latest built-out image will be copied and tested for each case, which will take
much time.
Signed-off-by Jiajun Xu <jiajun.xu@intel.com>
