We have various variables which are either not quoted at all or are half
quoted. This patch fixes the bad exmaples so everything is consistent.
(From OE-Core rev: 30253358f5e76fb7b25be27198b4c125e0dbdf2c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fetch/unpack/patch/headerfix tasks are shared and hence their sstate hashes
should also match. Sadly this is not the case since:
a) gcc-runtime applies an additional patch
b) The do_headerfix task was missing from libgcc
c) The do_headerfix task is a shell task and hence depends
on all exported variables which can vary between cross and target
recipes.
To fix this, the patch moves the patch to the common code, adds
the headerfix task to a common include file and disabled shell
dependencies on the do_headerfix task since its clear in this case
we don't need thsoe dependencies since we just call sed.
With this patch applied, all these recipes now share common sstate checksums.
(From OE-Core rev: 2c4569801a710f34a695b8d2a0ee7fc127fb34e4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch introduces a distro feature which enables gcc to produce
both 32bit and 64bit code, and enables binutils to operate on both
32bit and 64bit binaries. It differs from multilib toolchains in
that it does not require to compile a version of the libc for each
architecture variant. However, the code produced for the secondary
architecture will not be linkable against the libc.
v2: - Renamed the feature name from "biarch" to "multiarch". The GCC
installation manual claims that the mips-linux can be made a tri-arch
compiler (http://gcc.gnu.org/install/configure.html)
- For x86_64, the compiler is made bi-arch by default, so nothing
has to be done in particular.
- I analyzed the gcc/config.gcc from GCC sources and added in this
patch all the architectures that could be made biarch with the version
of gcc currently used in OE, which are powerpc, and sparc, in addition
to x86. mips and s390 will probably be supported in future versions of
gcc. For x86 and sparc, only the --enable-targets=all option is valid
to make this work (this option doesn't have any other side effects than
making the compiler bi-arch). For powerpc, I used the
--enable-targets=powerpc64 option (although 'all' also works).
Note: - Untested on powerpc and sparc. But I believe it works the same
as with x86.
- gcc in meta-toolchain is also made multiarch.
(From OE-Core rev: 99e295ef30ba02db3966c66619807c037ef5089f)
Signed-off-by: Julian Pidancet <julian.pidancet@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We ensure that:
* the shared work directory contains PR and ensure PR values are consistent across gcc builds
* the regexp to handle library directories is in a specific task and run once
This avoids breakage that was seen in incremental builds after commit
be1f70d68b where the interpretor could
become corrupted. This was due to the sed expression corrupting
the source directory.
(From OE-Core rev: 970af6b09e1d69041b0d82fa56ace19543405eb1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sed regex in do_configure_prepend was producing the following result:
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR "/lib64/ld-linux-x86-64.so.2"
instead of removing the leading "/lib" or "/lib64".
Now we have it do:
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR "ld-linux-x86-64.so.2"
Additionally, with the regex fixed the manipulation of SYSTEMLIBS_DIR
needs to be removed.
(From OE-Core rev: b343436d03fa5690b16ee8ef5d4a738c5194b301)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patched is derived from Richard, make gcc use the shared source
directory during the different building:
1) Make gcc-cross, gcc-cross-initial, gcc-cross-intermediate and
gcc-runtime share the same source directory.
2) The source directory is ${TMPDIR}/work-shared/gcc-${PV}, for example:
tmp/work-shared/gcc-4.5.1
3) Fix do_clean to clean the shared source directory and stamps
4) gcc uses sed and creates config files against ${S} which means the
directory should not be shared. Change the way to make it work:
* The configure option --with-headers=${STAGING_DIR_TARGET}${SYSTEMHEADERS}
can replace the sed command, see the code in configure:
if test "x$with_headers" != x; then
glibc_header_dir=$with_headers
This has the same effect as the sed command:
sed -i 's:^\([ ]*\)glibc_header_dir=\"${with_build_sysroot}/usr/include\": ...
so add the --with-headers=${STAGING_DIR_TARGET}${SYSTEMHEADERS} to
gcc-configure-cross.inc( not add to gcc-configure-common.inc, since
not all the gcc building need this, the one which has its own do_configure
doesn't need it).
* Move t-oe from ${T} to ${B}/gcc, so that the patched Makefile.in
can read it easily, please see the commit for gcc-4.5.1 and
gcc-4.6.0.
* Use the defaults.h in ${B}/gcc instead of ${S}/gcc, and the patched
configure.ac(configure) can read it correctly, please see the
commit for gcc-4.5.1 and gcc-4.6.0.
* The gcc-crosssdk.inc used sed to edit ${S}/config/*/linux*.h
to change the GLIBC_DYNAMIC_LINKER, which made the source
incompatible. To make the source compatible:
- Use:
sed -i ${S}/gcc/config/*/linux*.h -e \
's#\(GLIBC_DYNAMIC_LINKER[^ ]*\)\( *"/lib.*\)#\1 SYSTEMLIBS_DIR\2#'
so entries in the files that look like:
#define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
would become
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR"/ld-linux-x86-64.so.2"
and we define SYSTEMLIBS_DIR in defaults.h.
NOTE:
#define GLIBC_DYNAMIC_LINKER64 (SYSTEMLIBS_DIR "/ld-linux-x86-64.so.2")
doesn't work in in the following define:
#define LINUX_DYNAMIC_LINKER \
CHOOSE_DYNAMIC_LINKER (GLIBC_DYNAMIC_LINKER, UCLIBC_DYNAMIC_LINKER)
so use
#define GLIBC_DYNAMIC_LINKER64 SYSTEMLIBS_DIR"/ld-linux-x86-64.so.2"
5) Add do_configure_prepend to gcc-configure-common.inc and remove the
one in gcc-crosssdk.inc, this makes it easy to share the source,
otherwise we need do extra changes in gcc-configure-sdk.inc.
6) Use "cat > file <_EOF" to replace the "echo > file"
(From OE-Core rev: 934d38530c9a67562e53d4034aee5531f0f26750)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc uses hardcoded path "${with-build-sysroot}/usr/include" to check target
libc ssp support. Based on GLIBC version strings in features.h in that search
path, gcc knows whether target (e)glibc implements stack protector itself.
However this breaks meta-toolchain, which actually has target libc headers
installed under {with-build-sysroot}/opt/... This way features.h is not found
and thus gcc-crosssdk-intermediate thinks that target (e)glibc doesn't support ssp.
Later when building eglibc-nativesdk, undefined reference to "__stack_chk_guard"
occurs which was caused by:
o eglibc do_configure found that gcc-crosssdk-intermediate supports ssp,
and thus enable -fstack-protector for nscd
o eglibc itself supports stack smash proctection for some architectures such
as i386, x86-64, etc. It's expected to use its own method to provide stack
protection, instead of relying on gcc. So eglibc rtld.os doesn't export
__stack_chk_guard to other modules
o then when installing nscd objects, gcc-crosssdk-intermediate sees the
flag "-fstack-protector", while it thought this eglibc doesn't implement
ssp itself, so gcc turns to the alternative to find a valid
__stack_chk_guard exported. eglibc doesn'g export it, while
gcc-crosssdk-intermediate itself disables libssp.
Then the undefined reference happens. If enabling libssp for gcc-crosssdk-
intermediate, it may also work-around this issue. But the ideal fix is still
to replace hard coded path with the actual one where target libc gets installed.
glibc-nativesdk doesn't encounter this issue because it thinks gcc doesn't
support ssp, and thus doesn't enable "-fstack-protector" for nscd. Don't know
the reason yet
This fix [BUGID #366]
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
If not configured with --enable-target-optspace, gcc will report
errors if there is '-Os' optimization in parameters.
This fixes [BUGID #342]
Also add "--enable-target-optspace" option to arm gcc configuration.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Fix one parameter order issue for base_contains function,
which impacts glibc build under new gcc.
Add new judge code to determine whether <altivec.h> is needed.
This fixes the mpeg2dec build failure under new gcc.
Use O2 as the optimization flag to tinylogin as it will meet
segfault if compiled by gcc-4.5.0 when enable both frename-registers
and Os options. Use O2 instead.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Having one monolithic packages directory makes it hard to find things
and is generally overwhelming. This commit splits it into several
logical sections roughly based on function, recipes.txt gives more
information about the classifications used.
The opportunity is also used to switch from "packages" to "recipes"
as used in OpenEmbedded as the term "packages" can be confusing to
people and has many different meanings.
Not all recipes have been classified yet, this is just a first pass
at separating things out. Some packages are moved to meta-extras as
they're no longer actively used or maintained.
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
Richard Purdie
Julian Pidancet
Kumar Gala
Robert Yang
Khem Raj
Kevin Tian
Dongxiao Xu
Richard Purdie