connman currently supports both bluez4 and bluez5 without distinguishing
them at configuration time.
(From OE-Core rev: 420ab90167e434d6972702c44271104881f08fc9)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 4c2a993735b668c6fbe9889a910dfa07b65cdff3)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 33b3164c2627d20315ff716e7d78ced86871c472)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade includes 8 CVE bug fixes
(From OE-Core rev: 5dc197f0b2a088d8a88480da0afc886c745f551b)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I used a for loop to build these packages more than 520 times, these
recipes never failed.
(From OE-Core rev: 7957c5bc2771a763d26e50e716733c6335cef3c2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: af851c7cdeab0ef53f00866da3da1a96b96bd63a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Map the microblaze architecture to the linux-generic32 target.
(From OE-Core rev: 7ea1979f687777bcafec393b6ab126ec11017074)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The HEADERS' name has been changed to pkginclude_HEADERS, so use
nodist_pkginclude_HEADERS, otherwise version.h would be shipped.
It would cause other pkgs failed to build if ship version.h to
usr/include/version.h
(From OE-Core rev: 2025284acf8999d254c671b5e259587a4171858f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Fixes to GATT service discovery & probing
- Fix for bearer selection with dual-mode devices
- Fix potential crash when removing devices
- Fix issue with incomplete names in EIR data
- Fix parsing GATT name characteristics
- Fix AVCTP long press & key repetition handling
- Fixes for GATT notification handling
hex2hcd graduated to installed tool; two new noinst tools
See: http://www.bluez.org/release-of-bluez-5-28/
(From OE-Core rev: c8da28df187b22f1260b0f806854e8c357bccde4)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Fix issue with PIN retry handling;
- Fix issue with HFP and multiple calls;
- Add support for Distracted Driving Reduction;
- Add support for available technologies property;
- Add support for Telit location reporting driver;
- Add support for u-blox SARA-U270 modems;
- Add support for Quectel UC15 modems.
(From OE-Core rev: b3e7ecc75f5a2b0cf6dde03fb7b2972e89457c0d)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Fixes an issue with DHCPv6 retransmission timer
calculation that causes system load to jump to 100%;
- All WiFi P2P issues encountered with Miracast have been addressed;
- ConnMan no longer hands off foreground autoscanning to
wpa_supplicant as it causes issues when finding hidden WiFi networks;
Other changes and fixes include:
- Several fixes for handling IPv6 contexts via oFono;
- Fix memory deallocation in exit code paths;
- Use OPEN auth_alg for wpa_supplicant open WiFi networks;
- A WiFi Access Point with unknown strength now has a proper
minimum value which translates to a service 'Strenght' property of 30;
- Fix byte order in DHCP server identifier;
- Properly cancel an ongoing service connect if the Agent exits.
(From OE-Core rev: fa718d0d2d74893bf8e532a132f8ede26552d2be)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dhclient will fail to get an IP address if run inside a guest when traffic is
flowing over a virtual network interface. The user will see the error
message:
5 bad udp checksums in 5 packets
No DHCPOFFERS received.
Unable to obtain a lease on first try. Exiting.
Failed to bring up eth0.
This is because Linux only uses partial checksums for packets that go over
virtual network interfaces and dhclient does not like this.
See linux kernel commit 78ea85f17b15390e30d8b47488ec7b6cf0790663
("net: skbuff: improve comment on checksumming")
An application can detect this behaviour by checking for the
TP_STATUS_CSUMNOTREADY flag in the tp_status field.
See linux kernel commit 8dc4194474159660d7f37c495e3fc3f10d0db8cc
("Add optional checksum computation for recvmsg")
An extra parameter is added to decode_udp_ip_header() in dhclient to indicate
whether or not dhclient should ignore partial checksums. This is used
when the TP_STATUS_CSUMNOTREADY bit is set by the guest kernel.
This fix has been included in Fedora and Ubuntu, however it has not yet been
accepted by ISC upstream. Likely because it is specific to behaviour in Linux
and other UNIX variants do not seem to be affected.
The patch was imported from the dhcp source RPM in Fedora 21
(http://pkgs.fedoraproject.org/cgit/dhcp.git/tree/dhcp-xen-checksum.patch?h=f21)
Originally contributed to fedora-cvs-commit by David Cantrell on Jan 30 2007
(https://www.redhat.com/archives/fedora-cvs-commits/2007-January/msg01442.html)
Submitted to dhcp-bugs@isc.org - [ISC-Bugs #22806] - by Michael S. Tsirkin
(http://comments.gmane.org/gmane.comp.emulators.kvm.devel/65236)
(https://lists.isc.org/pipermail/dhcp-hackers/2010-April/001835.html)
Upstream-Status: Submitted [dhcp-bugs@isc.org]
(From OE-Core rev: 99b598927b7a3837621d9e83e69b3b4fd83afed1)
Signed-off-by: Rob Woolley <rob.woolley@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If maillock.h is found, a dependency on liblockfile will be created.
liblockfile is in meta-oe, so we don't want that in an oe-core recipe.
(From OE-Core rev: b2cee9b9f08dff41e46e227b1ffa5e46e98faa89)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebase sshd_config and ssh_config with openssh upstream.
Check for the ed25519 key in the systemd keygen service.
(From OE-Core rev: 046dd5567d9de0596023846e7f0c6df7f01a9f5b)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, site.h was overridden for setting _PATH_DHCPD_CONF
and _PATH_DHCLIENT_CONF, it caused other MACROs were missing,
so we use a patch to instead.
The macros NSUPDATE and COMPACT_LEASES existed in site.h
(From OE-Core rev: c9281266ea3b56a2a44ab5e543ead5cd0f80a42f)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And bump PR to avoid:
configure: error: source directory already configured; run "make distclean" there first
(From OE-Core rev: 26937169a0cb04e71ddd79bae3bca6feb22fc369)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There might be no src dir if the src/builtin.h runs earlier, create it
to fix the race issue:
src/genbuiltin nfctype1 nfctype2 nfctype3 nfctype4 p2p > src/builtin.h
/bin/sh: src/builtin.h: No such file or directory
(From OE-Core rev: 4b6762b924a561febede13b85330309dbf75da19)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After removal of auto-creating S we must ensure that all recipes are
using a proper value for S.
Fix all recipes that only need to set S equals to WORKDIR.
[YOCTO #5627]
(From OE-Core rev: 9d220b1bfe4589736604dd5a7129e3699377d830)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
And bump the PR to avoid:
configure: error: source directory already configured; run "make distclean" there first
(From OE-Core rev: 38aa1ef57392fcb726fcdd0b708b9d76f0279c77)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The SRC_URI and S in portmap.inc was for portmap 5, but we don't have
it any more.
* Remove DEPENDS = "virtual/fakeroot-native" and fakeroot before
do_install.
* Remove sbindir = "/sbin" and use "${base_sbindir}" in FILES.
* Move patches from dir portmap-6.0 to portmap.
(From OE-Core rev: b341066d625d5ff7980a4bdffb338fc83940502b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Bug fixes in A2DP, OBEX, GATT, and mgmt
- Low Energy Secure Connections with 3.19+ kernels
See: http://www.bluez.org/release-of-bluez-5-27/
See: http://www.bluez.org/release-of-bluez-5-26/
(From OE-Core rev: beb79d7b8fa59947e1e3e979c2b0d6d637a2447f)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Socat will look for openpty() in BSD headers before Linux headers, so if libbsd
is present at configure time then that will be used. We don't need to depend on
libbsd though, and leaving it floating can cause build errors, so tell configure
that the libbsd header isn't present.
(From OE-Core rev: 7defa2bb5b28ea69f749363a607a114cfa4ba4ed)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Deliver script ssh-copy-id from openssh which is useful to add an
authorized ssh key.
(From OE-Core rev: 16562034a2c28cbfc6c90f9324c42c08e0655b7d)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Firstly configure scritp was testing files from bin folder.
In our case we don't copy bin folder to sysroot for target
recipes. So added extra check to validate .pc file from lib
folder via a patch to configure.in file.
* Secondly linxml2 dependency was missing. So added PACKAGECONFIG
for libxml2.
(From OE-Core rev: b61a2acc321489c3427f0afa3059486dc144a13b)
Signed-off-by: Noor Ahsan <noor_ahsan@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This causes the package to not be relocateable from sstate
The OpenSSL binaries respect a few environment variables for determining
locations of files, so we now use these to point the binaries to the
relocated locations.
[YOCTO #6827]
(From OE-Core rev: 771d3123331fbfab1eb9ce47e3013eabcb2248f5)
Signed-off-by: André Draszik <adraszik@digisoft.tv>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Drop two CVE patches already handled upstream.
* Drop nostrip.patch which no longer applies and use the existing
--disable-strip configure option instead.
* OpenSSH 6.7+ no longer supports tcp wrappers. We could apply the
Debian patch to add support back in, but it seems best to follow
upstream here unless we have a good reason to do otherwise.
(From OE-Core rev: 59e0833e24e4945569d36928dc0f231e822670ba)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nothing in oe-core uses Telepathy, so move these recipes to meta-oe.
(From OE-Core rev: fc8c843ae2a7d688a5b7e3effd1dae10c7e2fbf8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(See patch refrenced from OE-core rev: 1c3beda0015da9a0fec2581af7645c9ea122c7e3)
Modifies do_configure to inject DRV_CFLAGS variable into wpa_supplicant/.config which is then included during make of drivers.
(From OE-Core rev: 766dcc69d320052f668945d2207bef723cf8be4b)
Signed-off-by: Justin Capella <justincapella@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add in conf.patch /etc/bind/db.255 file so that we don't get the following error.
zone 255.in-addr.arpa/IN: loading from master file /etc/bind/db.255 failed: file not found
(From OE-Core rev: 98caaf4b92bf3350cc74ef66dc9eda35aa7d428a)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the linux 3.17 kernel socat's configure detects the wrong include
for errqueue.h which results in a compilation error.
By backporting the gentoo patch from:
http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/net-misc/socat/files/socat-1.7.2.4-linux-3.17.patch
Fixes the build issue
(From OE-Core rev: ad83184721be815c6589b53dcf0b469f7fee5c41)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the export LD in the recipe does not allow for secodnary toolchain
overriding LD later, by setting it in the do_configure_append the export
is used by autotools setting LD based on the env, but would allow for
override later.
[YOCTO #6997]
(From OE-Core rev: 9b37e630f5f6e37e928f825c4f67481cf58c98a1)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For clarity use PACKAGECONFIG for the systemd and bluetooth optional features.
(From OE-Core rev: e76e7bf166544c1059c20753165a644dc1af750f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make it simple to enable the experimental plugins and tools.
(From OE-Core rev: df4fcc54d605fa0bf345ad54bc898505160198b0)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In bluez4 gatttool was provided as a command-line interface to the
Generic Attribute Profile. In bluez5 this tool is still built but is no
longer installed. It is still necessary for those wishing to use GATT
since the programmatic API is not yet mature. A variety of other useful
tools are treated similarly by bluez5.
Make these tools available in the bluez5-noinst-tools package, in a way
that allows control over which tools are packaged, with the default
being all that are provided in a particular release of bluez.
(From OE-Core rev: b5f6121dadebc9d854e0791dff466adbc8360d67)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bluez-hcidump was a separate package in bluez4, but was integrated into
bluez5.
(From OE-Core rev: 0dcaea0fcf38f0e382eda11e74ded1daeb98a8ac)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, we install our own ssh_config and sshd_config into ${S} in
do_compile_append() task. So when finishing compiling, their .out files
are generated by the original files, rather than by our own files.
In most cases, installing "$(CONFIGFILES)" in Makefile will generate .out
files again, and then installing "install-sysconf", which will install
these two files into $(DESTDIR), thus we get what we expect.
However, when parallel installing, "install-sysconf" may be installed
before "$(CONFIGFILES)" sometimes. In this rare case, the .out files
generated in the first time rather than those in the second time will be
installed into $(DESTDIR), and thus we get an unexpect result.
This patch fixes this bug through transfering the installing of our own
files from do_compile_append() into do_configure_prepend().
(From OE-Core rev: 6a60a4ba8d8e529882daa33140c9a2fc08714fb2)
Signed-off-by: Zheng Junling <zhengjunling@huawei.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
resolvconf was missing a script and needed readlink which was in
/usr/bin. Also the /etc/resolv.conf was not being correctly linked
to /etc/resolvconf/run/resolv.conf, which is fixed by the volaties
change which is now a file as opposed to created in do_install.
Ensure that the correct scripts for ifup/ifdown get installed and that
resolvconf is correctly enabled at startup
[YOCTO #5361]
(From OE-Core rev: 853e8d2c7aff6dddc1d555af22f54c4ecef13df1)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch resolves following error:
"connman-dbus.xml": "connman" is not a valid D-Bus interface name
(From OE-Core rev: 964bcac02bb182340e44dc8a07b5d308f0a4a719)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
