Provided better link to Wayland and a new link to Weston.
(From yocto-docs rev: 95086f7d4bf8ce3b3c33c2863435f2896c73cc3f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor changes as a result of a read-through of the section.
(From yocto-docs rev: 4139f67d3615d6fe3eca79356c92937a314b200e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some items found reading through the section. Needed some
cross-referencing to better targets based on newer information.
The text was quite dated in this section.
(From yocto-docs rev: eba809fd709d801bec50a820d7e6a5a79707dde6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor fixes throughout.
(From yocto-docs rev: d44ae0da21d84acbe1556824e228c7ab0af1ba2c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Along with some minor things I did the following:
* Added a brief explanation and reference to the reporting error
tool. It seemed like a good chapter to include it. I put it
in the debugging section.
* I added a pointer to the BitBake manual right at the top of a
section that had many usages of the bitbake command.
(From yocto-docs rev: 9317433bc715e9fdac2fc629ed659ac926d67531)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the read-through, I noticed that I did not have a complete
list of YP manuals in the "Introduction" section. I also added
the new BitBake manual to the list of external manuals.
(From yocto-docs rev: 46ae0400d807c733bc0c32b07b4b59cc8d6d2618)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This had been negleted and many new sections were not on the list.
It is all up to date now.
(From yocto-docs rev: 3291491ec41146a1dfa0cb2f1387fba85b1c7d24)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This information now exists in the separate BitBake User Manual.
To remove this information, the ref-bitbake.xml file was taken
out of the ref-manual.xml build, an overview bullet describing
BitBake chapter was removed from the "Introduction" chapter,
and one cross-reference link to a sub-section of the old BitBake
chapter had to be re-routed into the similar section of the BitBake
Manaul.
(From yocto-docs rev: 3828291699b5997c28a782600c9d472b8449ecd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1562]
In the dev-manual, I created a new section called "Using the
Error Reporting Tool" that describes how to use this feature.
The text was based on information I received from Andreea Proca.
In the ref-manual, I added a new variable entry for ERR_REPORT_DIR
in the glossary and a new report-error class in the class chapter.
(From yocto-docs rev: 70a5538fefcc1b77958fe4b2f29be00354f4137a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5442]
Updated the TMPDIR variable to call out the scenario where a user
might want to separtely set TMPDIR to a local drive and thus be
able to have the Build Directory on NFS.
Updated the "Build Directory" term with a note indicating that by
default, TMPDIR is inside the Build Directory and thus cannot be
on NFS. However, the user is able to by-pass that per setting
TMPDIR separately outside of the Build Directory.
(From yocto-docs rev: a5a308c512a3f4285bce16f17974dbf6b67432b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5766]
In the ref-manual, I added "Eclipse" use in the title for the
"Graphics Support" packages because the "xterm" package is required
for graphics support across all distributions.
In the dev-manual, I specifically called out the need for "xterm"
as a host package at the top of the section describing workflow
with Eclipse. I also updated the cross-reference links to the
host package and Linux distro requirements to point into the
ref-manual, which is more comprehensive, than into the QS.
(From yocto-docs rev: d3405be506fcb113f01d4fcba4631db80a1ed5dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4866]
Updated the main area where it talks about needing the right
versions of Git, tar, and Python. You can get this set up using a
couple methods. I documented both.
The changes in the FAQ and in the QS are basically notes that point
to that section for more information.
(From yocto-docs rev: 1b64c7c271303ecf10ec85c8a2cd5a0d909f1151)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5442]
Updated the description to note that TMPDIR cannot be on NFS
since it has issues that mess up the build process.
(From yocto-docs rev: a2fa1c8a23ee7a26fa362e089d84747b4cb4618b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2528]
The defaults for BB_NUMBER_THREADS and PARALLEL_MAKE are now
automatically set to the build host's number of processor cores.
I updated the "Building and Image" section in the Quick Start
to state that. I also updated the PARALLEL_MAKE variable.
(From yocto-docs rev: 2069c96d2410605c089da4eede2c7b4f9a7b704a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the adt-manual in the "Optionally Building a Toolchain Installer"
setion, I added some basic advantage information for building a
toolchain installer using bitbake image -c populate_sdk.
In the ref-manual, I added cross-referencing to this basic information
in several strategic areas: "SDK Generation", the populate_sdk class
reference section, the populate_sdk_* class reference section, and the
"Cross-Development Toolchain Generation" sections.
Finally, I also put in documentation for a new class called
autotools-brokensep.
(From yocto-docs rev: cde7dd2fbd7bdc0d71dc678ee7a5422459654287)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2424]
Some imgage names were cleaned up to have more meaningful names.
These doc changes here take care of changing "core-image-basic"
to "core-image-full-cmdline".
Five instances changed.
(From yocto-docs rev: b758f9645e66867b5728da1dd989bae70a216fcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5410]
I updated the figure that shows what do_rootfs does to create
the image. The new addition is the creation of the .manifest file
that lists out package information in the image. Supporting text
was also added in the section.
The updated figure was needed in both the ref-manual and
mega-manual figures folders.
Also, part of the fix included a new variable description for the
IMAGE_MANIFEST variable.
(From yocto-docs rev: 770448e0e8ce2e2c517ced5e71f5a916fefe5cf2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton noted that the output to bitbake <target> -c listtasks
was documented as going to a specific file only when in fact it
also goes to the console. I updated the section to include that
fact.
(From yocto-docs rev: 0ed7da3f0fc21412c1045889f241a3d86587d16f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5931]
Added descriptions for the following variables in the glossary:
* MODULE_IMAGE_BASE_NAME
* KERNEL_IMAGE_BASE_NAME
* PKGE
* PKGV
* PKGR
* PKG
The first two are for the bug. The remainder needed to be added
as they were referenced from the first two (except for PKG, which
I was told needed to be added anyway. I also fixed a couple formatting
issues in there for some other variables.
(From yocto-docs rev: c488b57a2ae5a5d1ef4b0da0ecaa9589c3106a45)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
Added the new variable CONFIG_INITRAMFS_SOURCE, which points to the
initramfs source. I also added information to the
INITRAMFS_IMAGE_BUNDLE variable noting how its use can avoid
circular dependencies as described by the bug.
(From yocto-docs rev: 73267642299d1164eeee5866e7ca7006c56260e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The opening sentence here said that the build history is
kept in the $TMPDIR/buildhistory directory in the Build Directory
as defined by the BUILDHISTORY_DIR variable. Well, the variable
claims it is kept in $TOPDIR/buildhistory. I went with the
variable as the correct source. So, I changed the intro
sentence here.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 242e372affe771776bdfc17f3e3f5187d8965467)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added more detail about this directory. I stated that it
is the top-level build directory and it is set when you
initialize your build environment with one of the init scripts.
(From yocto-docs rev: 839d704e7096dba039b17e5989cad7314732e6db)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the bit about isolating SDK information. Also removed
the workaround and text regarding the limitation that caused
adding and removing INHERIT += "buildhistory" to re-execute tasks.
Added a few links to some newly documented variables.
(From yocto-docs rev: 7d13bea6d9f0c2bdc9aa58c2933998d6d10ac810)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I modified a few areas to help integrate some newly documented
BUILDHISTORY_* variables. Mostly some rewriting to feature
some variables that help the user select build history features.
(From yocto-docs rev: 8cb6a09ba7f0bd645a12e6f7a93247a9f0e77980)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5855]
Added this new variable to the glossary.
(From yocto-docs rev: 72e31962ecb3289c3f986ecb54a5590b5101067d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5857]
I had missed replacing the release date in the manual revision
history tables for the 1.5.1 release. It was still an estimate.
I have replaced with the actual date of "January 2014"
(From yocto-docs rev: fb9abe0df33a9b551d797ac1b72577931f5f8ce6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
export XDG_RUNTIME_DIR=/tmp/$USER-weston used instead of
export XDG_RUNTIME_DIR=/tmp/$USER=weston
(From yocto-docs rev: 39cd1d39f550f19b391c037639b9ed6493b08cde)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a typo and also added a bit of information to be sure
the user understands this affects the local host.
(From yocto-docs rev: 4111ac06276f2d1b134176683c0f4d446ba35ef9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5801]
First draft of this description.
(From yocto-docs rev: 412d0cc7dbb74ece45940c40fbb617217ab88d2d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better wording. "holds" could be confusing for some.
(From yocto-docs rev: d94a1be421f39637b1d760dad401fdfb54e20b07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5755]
Put a link in the SDK section of the "Closer Look" chapter. The
link goes back to the SDKPATH variable.
(From yocto-docs rev: 7420da33bfa89625b5bbf592416c7f07780f8285)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5762]
Applied some more detail based on Laszlo's review comments.
(From yocto-docs rev: eb8d11504d6c22dfd9620422df3fc31cfcebb00c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5762]
Initial draft of this variable in the glossary.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: fb603925de6760f620f9f2832ad6cb4aad3acaae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5755]
I added this variable to the glossary chapter.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 0ad0e2ca351ebc52c92404d71502455cf7c042c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Noted that if these variables are not set, they both default
to the number of cores the build system has.
(From yocto-docs rev: 8654aeb91f734628bffda9d5de0cdc9ea27d3f67)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before this change, x11 was only documented as an IMAGE_FEATURE.
However, it is heavily relied upon as a DISTRO_FEATURE by
pacages that have an optional X dependency determined during
build time. Examples include libsdl, dbus, alsa, and
pulseaudio.
(From yocto-docs rev: dd243b453b6d69bc439dda816fa5c9c83c5c3cd4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4942]
Added a note to the variable description stating that if the user
does not set TCMODE to "default", it is up to them to verify that
components are compatible with the toolchain.
(From yocto-docs rev: e67d7635c1d749e65aaef0d4cc6576a3ee312ddd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit about needing to place the inherit statement last.
(From yocto-docs rev: 204e15035a9a116002b7f645e4edb378979c89f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the machine-dependent and machine-independent descriptions.
Created matching description from the "Writing a New Recipe"
section.
(From yocto-docs rev: 89a00beb81be60668abfdd67b13f5ee5bdc7ea1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor changes.
(From yocto-docs rev: e545ee26e7e6c827c5ee6d7061f01eda58c9c82b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added perl-Thread-Queue to the essential and graphical
package sets for the Fedora distribution.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 26b1ce3cd1fb20b67107d0d1bc0a66cc3a06706e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These variable descriptions were identical in the ref-manual.
I found out some reasoning behind that and added a bit of
explanation to the entries.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 5c786b5b62fefb959ed7c13bb83e718a9eb22189)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
Added a new description for the INITRAMFS_IMAGE variable. Also,
made a formatting fix to the INITRAMFS_IMAGE_BUNDLE variable.
(From yocto-docs rev: 87c5c0b1554233c3ce1c41291d852021ec62e0dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
Added that the kernel class sets the variable to a null string
by default.
(From yocto-docs rev: d00ea912ad9ad1558546496e72fca229b9b8081b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4072]
First draft of a new variable description for
INITRAMFS_IMAGE_BUNDLE.
(From yocto-docs rev: 4f1ac2840750fa35afa7584d28464fd539883399)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5684]
Added a clause to note that the tarballs saved to the DL_DIR area
include the Git metadata.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 76cbb8a149b9fda6879f9dfc6a17dab992325e94)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The FAQ entry for the information on adding a package to your
image changed regarding the cross-reference. I updated it to
the new anchor tag.
(From yocto-docs rev: 6c6b4cced41354412dc8c8d3c99d69f3a7cc8a95)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some more information around the use of the ICECC_DISABLED
variable. Information from Martin.
Reported-by: Martin Jansa <martin.jansa@gmail.com>
(From yocto-docs rev: 25990dbe66690991babda602ef40df948b70b038)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We no longer have the external-sourcery.bb recipe. Had to rewrite
this around it.
(From yocto-docs rev: 4b0e3860216092461862d29b3a53a834f8dd43b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory is not a temporary thing.
(From yocto-docs rev: 4a10a64866e9e769a2113f95943d69cb79543d6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used a better word to describe the argument list.
(From yocto-docs rev: e31852ee32b2f5166cc766a2cdfe07616dd259db)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saul Wold provided me with more detail on this class, which
I added.
(From yocto-docs rev: eee81ed69fc6ba766926f8514e88df4ba4640cec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton provided an expanded explanation.
(From yocto-docs rev: 313899b280d7879ee86c9317021388a3cd080662)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Three broken cross-references to the "qmake_base" class existed
in the variables chapter. The actual class "qmake_base" is
listed as part of the "qmake*" class so there is no tag taking
a user to the exact "qmake_base" class. Changed the tag to
"ref-classes-qmake*".
(From yocto-docs rev: c13e441e9bbe3a451a59e5123b772426d36183ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note at the bottom clearly stating TAR files are never
used as a substitute for RPM, DEB, or IPK files when generating
your image or SDK.
(From yocto-docs rev: 8d45ac58926de4fb01156eccd53cfa0f3eca4d9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The text used "packages" rather than "recipes." This is a
tragic result of historical naming mistakes early in the project.
(From yocto-docs rev: 0492b458f249f0c4cec6fa3cdd73ab7ca1f1506e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the formatting of the second instance of the
term "systemd".
(From yocto-docs rev: 46696db9869318d8df026a2761d6d8c70e7b3b55)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor re-wordings here.
(From yocto-docs rev: 4f60a44520263e3ef3c885a27fcaba1ef8b63609)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the rootfs_deb, rootfs_ipk, and rootfs_rpm classes
altoghther and opted to briefly describe their purposes in the
rootfs* class section. I also am not linking to the IMAGE_FSTYPES
variable but am rather linking over to the PACKAGE_CLASSES
variable.
(From yocto-docs rev: 5e92a1d4f489d5b48f5dbaac7c75ab1a1014e220)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out you can specify this using the PACKAGE_CLASSES
variable but you better not list it first.
(From yocto-docs rev: 9b160b15b3508e360fd57ac4375867d58cdc9709)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was pathetic and needed updating.
(From yocto-docs rev: 30996e88a8ca26d57f748fc8232bb26e0ff6c433)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered some issues with this description. Should be
referencing the Build Directory for where the local.conf file
is and not the Source Directory. Also, the link to the
package.bbclass section was mis-titled.
(From yocto-docs rev: 38daa12eae5303a70cf210f8669e416b161b38bc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sorting out who assumes what.
(From yocto-docs rev: f02312e300ce7749a7a5347538ece26f5cfa76bf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the links in the icecc class that linked into ICECC_CC,
ICECC_CXX, and ICECC_VERSION so they don't link anymore but rather
give a very brief explanation of what the variable does.
Removed the above three variables from the variable glossary.
These are not BitBake variables and we should not document them.
(From yocto-docs rev: f4f79d27c0d1417ff683381f18f165cda3a8a02e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor changes to the SYSTEMD_PACKAGES, SYSTEMD_SERVICE, and
SYSTEMD_AUTO_ENABLE variables.
(From yocto-docs rev: 838eb9088ec20a265e785d4203e4e5084fd4a7c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added links to USERADD_PACKAGES, USERADD_PARAM, GROUPADD_PARAM,
and GROUPMEMS_PARAM
(From yocto-docs rev: 4b9d23c205f687a6c43efd9f504a7cc9815dc835)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
icecc - added link to Icecream.
images - added some reference links to the end of the section.
logging - added closing ")" character.
nativesdk - corrected the mis-copied recipe name.
own-mirrors - fixed the class name so it was not "ownmirrors".
package - minor tweak to indicate class. Also spelled Berkeley
correctly.
package_deb, package_ipk, and package_rpm - dumped a note and
mentioned that you need PACKAGE_CLASSES to enable the
class.
package_tar - noted that the recipe inheriting the tar class is what
does the trick here.
pixbufcache - minor edits
populate_sdk - minor edits
prserv - edits to tell how it is enabled.
pythonnative - re-worded it.
rootfs* - reworded.
rootfs_deb, rootfs_ipk, and rootfs_rpm - Brand new.
systemd - reworded.
terminal - rewording
useradd - reworded
(From yocto-docs rev: a668eb6e70f416c0818253b0d3456c4f5f6ec050)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added opening reason for the icecc class. Also cleared up the
sentence describing ICECC_PATH.
Minor fix to image class. Also added some reference
links.
Minor fix to image-mklibs class. Also combined rouge
sentence stating that the class in enabled.
Same fix to rogue sentence in image-prelink class.
Fixed "insserve" into "insserv" throughout.
Added many links to some missing classes in the kernel
class. Subsequent commit to actually add the class
documentation.
(From yocto-docs rev: 150de3e52d6c8c775b1128118e7d6eff51014c4e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
extrausers - Changed the note to try and describe that the
change is still specific to an image recipe but is not
tied to other individual recipes.
fontcache - Minor fix.
gtk-icon-cache - fixed capitalization issue.
gtk-immodules-cache - Minor fix
gzipnative - Minor fix.
(From yocto-docs rev: 8cf810bf7b1c030c831205526303af7dd73cf6be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a link in the deploy class.
Re-wrote the bugzilla class to be clearer.
(From yocto-docs rev: 4bb975a0e12c9d38e941f1cf913c042498f06976)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modifications to ccache, chrpath, clutter, cross, cross-canadian,
crosssdk, and debian classes.
Added a new variable to the glossary for LEAD_SONAME.
(From yocto-docs rev: f27b6315f839a731017866106578e664c6c86982)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some review edits from Paul Eggleton for the following
classes:
allarch
base
bin_package
bugzilla
buildstats
(From yocto-docs rev: fe6b688106c5444fe6306326751ce636894acfd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was there because we did not document all the
classes in meta/classes. Now that we are I am dumping it.
(From yocto-docs rev: 3c704fcf8b9e6684d40f0df2069c4e17989ad129)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also had to update four instances in the variables glossary where
links to the section for the class became misnamed due to
stripping out the excess stuff from the class section heading.
(From yocto-docs rev: d98d3848327950c5c5cfc8559379e56c97157ad2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to also fix a couple links in the "migration" chapter due
to the section heading of the packagegroup.bbclass section
changing.
(From yocto-docs rev: bf71e6ee1812b54ba8afafa9818eb718c3bd2f82)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Chengwei Yang
Jonas Eriksson
David Nystrom