Based on a discussion with IRC user: Ulfalizer
It was suggested that removing the diagnostic list, and replacing it with a
simple hint to what might be causing the problem was a better solution.
(From OE-Core rev: ca78313665b23bd7fee85f034acfe1eb1009bd65)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the debug before the error (as it can take many pages.) This makes it
much easier for the user to see the actual error message as it is still on
the screen.
(From OE-Core rev: d643fb2a9cb5bd0d8b0105e9d44b989a49ffa963)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the very first build, the DEPLOY_DIR_IMAGE
directory might not have been created yet, causing
the creation of the qemuboot.conf config file to
fail.
This is because write_qemuboot_conf() runs at
rootfs creation time, i.e. before deploy.
So let's create the directory if necessary before
trying to write the config file.
(From OE-Core rev: ee4697350a553a36ca17b9376911e56eee43a465)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make sure changes to any source files are detected when externalsrc
is used, it sets BB_DONT_CACHE to force the recipe to be reparsed
every time. Previously, this was done conditionally based on whether
EXTERNALSRC was set. This worked fine for building the base recipe.
But if one tried to build, e.g., a native version of it (provided via
BBCLASSEXTEND), the recipe would not be reparsed as expected.
To solve the above problem, BB_DONT_CACHE is now set for the base
recipe if EXTERNALSRC is set for it or any of it derivatives.
(From OE-Core rev: 449a0b21255d895e8620383ce76a9d7ea41b5cc6)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Default values for KERNEL_IMAGE_BASE_NAME and MODULE_IMAGE_BASE_NAME
are already assigned using ?= and anyone wanting to over-ride one is
likely to want to over-ride them all. Make the three consistent with
each other.
(From OE-Core rev: e30c6c93bb70d17244c90c2be12229148f8f6314)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dropbear will use system versions of libtommath and libtomcrypt if
available. To make builds deterministic, add a PACKAGECONFIG option
to choose system libs or force use of the bundled versions.
Note that currently there are no libtommath or libtomcrypt recipes
in oe-core, so default to using the bundled versions.
(From OE-Core rev: b7c2edd2d6ded287d8b34dd047ae84d3fd69d4c6)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To prevent build failures when using system libtom libraries and
linking with --as-needed, LIBTOM_LIBS should be in the order
-ltomcrypt -ltommath, not the other way around, ie libs should be
prepended to LIBTOM_LIBS as they are found, not appended.
Note that LIBTOM_LIBS is not used when linking with the bundled
libtom libs.
(From OE-Core rev: 62e96283fe77469e24e8df86c6c037c92009b00a)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will allow runqemu to fall back to trying the link name when
a file matching the full name can't be found.
(From OE-Core rev: 3ccbaaad75f0a53d8bcf6a5c748ec80c96a383bd)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
KERNEL_IMAGETYPE gives the filename of a symlink to the kernel,
which may not be available i.e. if the user downloads some build
artefacts to run on a local machine. It's also possible that the
link will point to a newer kernel than was intended for use with
the rootfs in the qemuboot.conf.
It's much more reliable to read the name of the file
KERNEL_IMAGETYPE is linking to and assign the full filename to
QB_DEFAULT_KERNEL.
[YOCTO #10285]
(From OE-Core rev: d57bdacab13605ada4cd9e9159c18fdcd6eeacbc)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* validate_pn() is supposed to protect against invalid characters, fix
the function so that it actually does (unanchored regex strikes
again...)
* However, now that the function is enforcing the restrictions, we do
still want to allow + in recipe names (e.g. "gtk+")
(From OE-Core rev: c5d5a1baf98a11676537fb5e9f8ec4409e30c1fd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not ship /usr/bin/glilypond and related files such
as man file /usr/share/man/man1/glilypond.1 and other
three files related to glilypond under
/usr/lib/groff/glilypond in embedded system, it is because:
- Remove the confusion about glilypond fails to run
because it lacks dependency on File::HomeDir perl
module
- We don't often have need for sheet music conversion
in groff in embedded or IoT devices (glilypond
transforms sheet music written in the lilypond language
into the groff language using the .PSPIC request, such
that groff can transform it into a format that can be
displayed directly).
(From OE-Core rev: 9a0bf9567f80f06ea067189bf5c27bb5155a85b0)
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change causes the licenses of the linux-firmware-*-license to be the license
that it contains instead of all the licenses of the linux-firmware package.
[YOCTO #10251]
(From OE-Core rev: 3b1423df3369e7239d1969b42e090278df8bbff2)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to the recipe now using variable IMGDEPLOYDIR instead of DEPLOY_DIR_IMAGE,
the final Build Appliance image ended up being created in a wrong location.
This patch assures the final ZIP image is created in identical location as before:
tmp/deploy/images/<machine>/Yocto_Build_Apliance.zip
[YOCTO#10274]
(From OE-Core rev: 5ac0604fdc7d5b783011c43d476210b427b5dae0)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split out the functionality doing configuration re-parse check into a
separate event handler that is hooked into ConfigParsed event. This will
make config re-parsing actually work. Re-parsing in bitbake is triggered
by setting BB_INVALIDCONF whose value is checked after configuration has
been parsed (after ConfigParsed event). However, previously
BB_INVALIDCONF was set in SanityCheck event handler which caused
re-parsing never to happen.
[YOCTO #10188]
(From OE-Core rev: 8fda70bb74f7c63d393d5424436d034d2cc6c05e)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LICENSE file describes how the various pieces are licensed, so add it to the
checksum so we notice when it changes.
(From OE-Core rev: 3309007b423654c1b021d85205f81e68cbd84475)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, if the gshadow file did not exist in the sysroot when
perform_groupmems() was run, it would be temporarily created and
removed again afterwards. This was supposedly due to groupmems failing
if it does not exist.
However, based on empirical testing and examination of the source code
for groupmems, it should not fail if the gshadow file does not exist
when groupmems is started. But it WILL fail if the file is removed
sometime after its existence has been check at the beginning of the
execution, but before it needs to be modified. And this is exactly
what the previous code in perform_groupmems() could cause if multiple
tasks simultaneously modified users or groups. It could cause any of
the useradd, groupadd and groupmems commands to fail as long as at
least one other recipe invoked perform_groupmems().
(From OE-Core rev: 4fcaa484a2e8046cf3277b5d14933cdaa94a4c3f)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable building of mkfs.bfs, which is used to create
BFS file-systems used by SCO UnixWare. This is highly
unlikely to be utilized and there are otherwise no
references to 'bfs' throughout the rest of the tree.
(From OE-Core rev: 3226d89ff743c223181fda90f605c7579337941a)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable building of {mkfs,fsck}.minix, which are used
to support minix file-systems. Minix predates Linux and
support for its file-systems is unlikely to be needed.
No recipes otherwise reference minix, except in patches
to autotools configuration scripts, so there should be no
impact to other recipes.
(From OE-Core rev: fc66762d7c112fb798c2444dd902ce03baf975c4)
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This causes the default timeout to be set to infinity, it will still report out
every 5000 milliseconds
(From OE-Core rev: fd9e1ba8f70402bd3c4b873d349057f96f5bcb19)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default cmake will auto-detect if a library is present on the host and if it
isn't present will use an internal fork. For some libraries using the internal
fork is preferable as it can be built with less dependencies, but for others
we're either already building it or the impact of building it is comparable to
internal build.
Continue to use the internal fork of libarchive as our libarchive-native has a
large number of build dependencies. Using the internal libarchive means that
system bzip2 and zlib must be used.
Explicitly use the internal fork of jsoncpp as we don't have this in oe-core.
Explicitly depend on curl-native, expat-native, and xz-native to ensure these
dependencies are not floating. curl-native is a non-trivial dependency but is
comparable to building the internal fork, so there's no reason to build it
twice.
Change bzip2-native to bzip2-replacement-native as bzip2-native is
ASSUME_PROVIDED.
[ YOCTO #9639 ]
(From OE-Core rev: f9366799aaf4ad2b98345743c7129fa94d092880)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The intention here was "everything but jsoncpp is system provided" so use the
convenience option to ensure this remains true in the future.
(From OE-Core rev: f863b227e22b67ab239ee6124471fdc14de3f017)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously the following commit in oe-core move RPM metadata
from DEPLOY_DIR to WORKDIR.
-----------
commit a92c196449c516fe51786d429078bbb1213bb029
Author: Stephano Cetola <stephano.cetola@linux.intel.com>
Date: Wed Aug 10 13:03:16 2016 -0700
Allow for simultaneous do_rootfs tasks with rpm
Give each rootfs its own RPM channel to use. This puts the RPM metadata
in a private subdirectory of $WORKDIR, rather than living in DEPLOY_DIR
where other tasks may race with it.
-----------
In the modification of 'class RpmIndexer, it should not
directly set arch_dir with WORKDIR. It caused 'bitbake
package-index' could not work correctly.
Assign WORKDIR as input parameter at RpmIndexer initial time
could fix the issue.
(From OE-Core rev: 3c8c8501d0a19b566a94a9e06afe40642b444958)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The groupadd from shadow does not allow upper case group names, the
same is true for the upstream shadow. But distributions like
Debian/Ubuntu/CentOS has their own way to cope with this problem,
this patch is picked up from CentOS release 7.0 to relax the usernames
restrictions to allow the upper case group names, and the relaxation is
POSIX compliant because POSIX indicate that usernames are composed of
characters from the portable filename character set [A-Za-z0-9._-].
(From OE-Core rev: 31c6c8150394de067085be5b0058037077860a8a)
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "forever" package, despite its innocent description, actually drags
in a surprising number of dependencies and as a result the nodejs test
takes up to 10 minutes as a result. Pick a different example with a much
more reasonable set of dependencies.
Addresses part of [YOCTO #10254].
(From OE-Core rev: 638ee71da967f093071ba25e0ea5c467dab65339)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
40 character paths work OK for device nodes in /dev but not for
device nodes created in a chroot, LXC container, etc.
Since the 'path' array is already a 4k buffer, the sscanf 40
character limit seems to be a typo or historical mis-merge. Update
the sscanf limit and bring the code in sync with the Buildroot
version:
https://git.buildroot.net/buildroot/commit/?id=8876b6751e0bc19a3754290061808f0f8420708e
(From OE-Core rev: e8022d00c34e37300c1c06f712c7ced5e03d2a57)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This logs the launch command that was used for runqemu while running -c
testimage. This way, if I'd like to easily launch qemu manually in
order to debug a failed test, I know what commmand was run to create
the qemu instance.
(From OE-Core rev: 34aa20c6f323bbf7ad53beb643126e4e03634708)
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This class adds a new task for all the recipes to use
cve-check-tool in order to look for public CVEs affecting
the packages generated.
It is possible to use this class when building an image,
building a recipe, or using the "world" or "universe" cases.
In order to use this class it must be inherited and it will
add the task automatically to every recipe.
[YOCTO #7515]
Co-authored by Ross Burton & Mariano Lopez
(From OE-Core rev: d98338075ec3a66acb8828e74711550d53b4d91b)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cve-check-tool is a program for public CVEs checking.
This tool also seek to determine if a vulnerability has
been addressed by a patch.
The recipe also includes the do_populate_cve_db task
that will populate the database used by the tool.
[YOCTO #7515]
(From OE-Core rev: 5deadfe634638b99420342950bc544547f7121dc)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cmake doesn't use autotools, the functions get replaced by either cmake.bbclass
(target) or the recipe itself (native) leaving just lots of superfluous
dependencies.
(From OE-Core rev: b8700e9fd30317d0ad583febb4e6f385284bdd51)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MIPS64 target was being configured for linux-mips which defaults to
MIPS32. Doesn't cause any issue as far as I can see but it would be
wiser to use the correct target configuration.
Also add MIPS64le configuration which is missing.
(From OE-Core rev: 0afec72913bc31d315cba079da317e8b28755ded)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To help debug failures, redirect stderr to stdout in oeSDKTest.run() and
oeSDKExtTest.run().
(From OE-Core rev: 4cd143e0de7f0082f60f273f442f6255f28ec3e7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previous work to clean up the license QA code (oe-core fbdf977) had the side
effect that failing the license sanity check (bad or missing LIC_FILES_CHKSUM)
would emit an error message but wouldn't actually abort the build.
Solve this by changing populate_lic_qa_checksum() so that it tracks if the
message class was in ERROR_QA and if so, aborts the function.
[ YOCTO #10280 ]
(From OE-Core rev: 5ba1a7505b904a4aa2118fa9614d76df97597af8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you bump the PR of sgml-common and openjade-native but not sgml-
common-native, you will see a failure as files were removed from the
sysroot but still referenced by the sgml docbook catalog.
To properly handle this, the clean function needs to run at sstate
removal time, the problem is that this sstate removal can happen when
the metadata isn't present, so the correct removal commands are
unknown.
To avoid this, we need to write the commands into a "postrm" script
when we install the files, this can then be executed at sstate removal
time.
[YOCTO #8273]
(From OE-Core rev: cdae3e76232110903d124195b036e4e70fb28aa4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some issues in sstate which can't be handled by file removal
alone. Currently there is no way to execute a command against sstate and
doing so is potentially problematic for things like dependencies. This
patch adds a mechanism where any "postrm" script is executed if its present
allowing some openjade/sgml issues to be resolved.
[YOCTO #8273]
(From OE-Core rev: 2268efd0cd3ddb40870c4c424d10444ba86d2849)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to avoid race condition when test if exists the linkfile
use bb.utils.lock, the best solution is to create a unique name
for the link file.
There is no way to create a unique linkfile name at this decorator
because is needed the machine and image variables, those variables
can't be passed easily in this code.
To avoid broke test export functionality use a try/except because bb
isn't available when use test export
[YOCTO #10225]
(From OE-Core rev: 059d475b6bce1e5414170a4fe2e7989f6b0eacd6)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
IMAGE_DEVICE_TABLE and IMAGE_DEVICE_TABLES are both referenced by
_create_devfs, therefore ensure that rootfs is rebuilt if changes
are made to either variable.
(From OE-Core rev: 06092cee0dc8c7cd2408ddfa9e9dc43fd9dfea2e)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ${WORKDIR}/git refers to the source folder S which is different in
the case of an external source build.
(From OE-Core rev: fd4f4264a99cb0f8d20e3d87f66102d99cb5b6ad)
Signed-off-by: Christian Schuler <schuler.christian@siemens.com>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove patch maxsize.patch already applied upstream.
* Add patch Skip-empty-section-fixes-66.patch to prevent errors like:
/
|ERROR: go-cross-1.6.2-r0 do_populate_sysroot_setscene: '('patchelf-uninative',
|'--set-interpreter', '/home/user/src/prj/build/tmp/sysroots-uninative/
|x86_64-linux/lib/ld-linux-x86-64.so.2', '/home/user/src/prj/build/tmp/
|work/x86_64-linux/go-cross/1.6.2-r0/sstate-install-populate_sysroot/x86_64-
|linux/usr/bin/aarch64-prj-linux/go')'
|failed with exit code 1 and the following output:
|cannot find section .rela.dyn
\
* Add patch handle-read-only-files.patch to fix error when building
eSKD, the following error appears on task do_testsdkext
/
|ERROR: db-native-6.0.30-r1 do_populate_sysroot_setscene: '('patchelf-uninative',
|'--set-interpreter', 'src/fsl-community-bsp/build/tmp/work/qemuarm-poky-linux-
|gnueabi/core-image-minimal/1.0-r0/testsdkext/tc/tmp/sysroots-uninative/
|x86_64-linux/lib/ld-linux-x86-64.so.2', 'src/fsl-community-bsp/build/tmp/work/
|qemuarm-poky-linux-gnueabi/core-image-minimal/1.0-r0/testsdkext/tc/tmp/work/
|x86_64-linux/db-native/6.0.30-r1/sstate-install-populate_sysroot/x86_64-linux/
|usr/bin/db_tuner')' failed with exit code 1 and the following output:
|b'open: Permission denied\n
\
* Add patch Increase-maxSize-to-64MB.patch to fix error described
bellow, the same issue is discussed here:
- https://github.com/NixOS/patchelf/issues/47
/
|ERROR: qemu-native-2.5.0-r1 do_populate_sysroot_setscene: '('patchelf-uninative',
|'--set-interpreter', '../build/tmp/sysroots-uninative/x86_64-linux/lib/
|ld-linux-x86-64.so.2', '../build/tmp/work/x86_64-linux/qemu-native/2.5.0-r1/
|sstate-install-populate_sysroot/x86_64-linux/usr/bin/qemu-mips64')'
|failed with exit code 1 and the following output:
|warning: working around a Linux kernel bug by creating a hole of 36032512
|bytes in ‘../build/tmp/work/x86_64-linux/qemu-native/2.5.0-r1/
|sstate-install-populate_sysroot/x86_64-linux/usr/bin/qemu-mips64’
|maximum file size exceeded
\
(From OE-Core rev: 18efcbcb896239c64fedd009ce57f3f0c668cbc0)
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building busybox, an occasional error was observed.
The error is consistently the same:
libbb/appletlib.c:164:13: error: 'NUM_APPLETS' undeclared (first use in this function)
while (i < NUM_APPLETS) {
The reason is the include file where NUM_APPLETS is defined is not yet generated (or is being modified)
at the time libbb/appletlib.c is compiled.
The attached patchset fixes the problem by assuring libb is compiled as the last directory.
[YOCTO#10116]
(From OE-Core rev: a866a05e2c7d090a77aa6e95339c93e3592703a6)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have a proper fix now so we can remove the workaround.
This reverts commit 4d268abc2fc892c5d34449f78c8e9f2b1a9d6bac.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add patch to control building cunit-tests explicitly. Disable
them in the recipe.
Fixes [YOCTO #9849].
(From OE-Core rev: cd287235fc5b9d0c174a10a89e31ffd391806113)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the correct build system patch instead of adding linker flags
in recipe. Also update upstream status for the other build patch.
Fixes [YOCTO #9851].
(From OE-Core rev: cd67959c4794b132cb9fd20a2a37cf862e172bed)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use md5 sum instead of mtime as the "digest" method for rpm_sys channel.
The digest is used to determine if the channel has been updated. It was
found out that mtime was not a reliable digest. On some systems mtime
of the rpm db does not get updated after every transaction if transactions
(smart install / remove commands) are fired in quick succession. As a
consequence smartpm cache and rpm db get out of sync.
[YOCTO #10244]
(From OE-Core rev: e7267b4e78461e71a1175f93e2eb5e90272c2b47)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Indirect paths (e.g. ${TOPDIR}/../meta-something) do generally work if
used in BBLAYERS in bblayers.conf. However, if you built an extensible
SDK with this configuration then the creation of the workspace within
the SDK using devtool in do_populate_sdk_ext failed. This is because
the copy_buildsystem code was no longer correctly recognising that the
core layer ("meta") was part of a repository (e.g. openembedded-core /
poky) that should be shipped together - because of the indirection - and
thus it was splitting out the meta directory, and a number of places in
the code assume that the meta directory is next to the scripts
directory. Use os.path.abspath() to flatten out any indirections.
(From OE-Core rev: 7c0788cd2390fd0e1ec84bc9dbebcb67daee429f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After we run the build system within the eSDK internally as part of the
sstate filtering that happens during do_populate_sdk_ext, we need to
ensure that the TMPDIR created during that process gets deleted. However
we were using the TMPDIR path for the build producing the eSDK which may
not be the same (since that value would typically be filtered out) thus
if the user had set TMPDIR to something other than the default, the
temporary TMPDIR would not be deleted which not only led to extraneous
junk entering the SDK but also failures during install because the
TMPDIR path was different. In order to fix this, force TMPDIR to a known
value during the sstate filtering run so we know what to delete
afterwards.
Fixes [YOCTO #10210].
(From OE-Core rev: 038d9db66e69c9de12eb8581acb28a8facd726b6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building eudev from scratch in an sstate build results in configure errors
since the pkg-config macros can't be found. Add in a missing pkg-config
dependency using the appropriate class to avoid such failures.
(From OE-Core rev: 6b527bbfea5088c20da98cd72abe5caa4b399787)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently when you run builds from sstate, you can see warnings like:
WARNING: systemd-1_230+gitAUTOINC+3a74d4fc90-r0 do_configure: /data/poky-master/tmp-glibc/sstate-control/manifest-intel-corei7-64-glibc-initial.populate_sysroot not found
WARNING: systemd-1_230+gitAUTOINC+3a74d4fc90-r0 do_configure: /data/poky-master/tmp-glibc/sstate-control/manifest-intel-corei7-64-libgcc-initial.populate_sysroot not found
This is due to co_configure wanting to copy a limited number of m4 macros,
only listed in a recipes DEPENDS but that set is still larger than the set of
recipes which get restored from sstate.
For build determinism and to avoid these warnings, we need to make this
function match what the sstate code does. We really don't want to duplicate
the functionality since keeping things in sync would be hard so we create
a data structure which can be passed into the same underlying function,
setscene_depvalid().
[YOCTO #10030]
(From OE-Core rev: 37ffb1f7d812e40d6fa23b44782eaa8436d9ab76)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various recipes depend on the kernel's do_shared_workdir
task, a quick grep suggests all external kernel modules
(via module.bbclass), but also perf, and potentially any
additional headers as outlined in linux-libc-headers.inc
are affected.
Having do_shared_workdir in SRCTREECOVEREDTASKS means this
task is removed when externalsrc is enabled, making all
those recipes fail as the task they depend on,
virtual/kernel:do_shared_workdir, doesn't exist.
Remove do_shared_workdir from SRCTREECOVEREDTASKS so that
all those recipes work even if externalsrc is activated.
According to the comment in here, the reason for
do_shared_workdir to be removed as a task is because it
modifies the source tree, but that doesn't seem to be
case.
(From OE-Core rev: 29e99d7a57803e450920600b5d35c5b4e58a0ede)
Signed-off-by: Andre Draszik <git@andred.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should reduce build times.
(From OE-Core rev: 74d9c5eb858bfe1dd16826b74be3af71bb1956d9)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When IMAGE_GEN_DEBUGFS is enabled, and IMAGE_FSTYPES_DEBUGFS is left
at its default (as suggested by local.conf.sample.extended),
recipe parsing fails:
bitbake kern-tools-native # or anything else for that matter
ERROR: <poky.git>/meta/recipes-core/images/build-appliance-image_15.0.0.bb: No IMAGE_CMD defined for IMAGE_FSTYPES entry 'debugfs_vmdk' - possibly invalid type name or missing support class
ERROR: Failed to parse recipe: <poky.git>/meta/recipes-core/images/build-appliance-image_15.0.0.bb
Summary: There was 1 WARNING message shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
i.e. bitbake doesn't even finish parsing...
Since IMAGE_FSTYPES_DEBUGFS is based on IMAGE_FSTYPES, and
since the build-appliance-image is setting IMAGE_FSTYPES
to vmdk, image.bbclass/image_types.bbclass will be trying
to build a debugfs_vmdk, causing the error, as this is not
implemented.
One solution to solving this problem could be as simple as
adding a line
IMAGE_FSTYPES_DEBUGFS_remove = "vmdk"
to the build-appliance-image recipe, but that is very
specific to the error encountered and carries the risk of
the error being reintroduced in another recipe.
Another solution could be to add 'debugfs_vmdk' to
IMAGE_TYPES_MASKED in image-vm.bbclass, but again, this
approach doesn't seem generic enough.
None of the live and vm type images have an implementation
for building a debugfs version, it doesn't seem to make
sense to build debugfs versions of any of them anyway, and
given IMAGE_TYPES_MASKED appears to be intended for those
image types exclusively, it seems the right approach is to
unconditionally also mask all debugfs_ flavours from
IMAGE_TYPES_MASKED to achieve a generic solution.
Do that so.
(From OE-Core rev: 9bd682c4f1c19d68c573c11822888ee799809272)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The debugfs is supposed to be used in addition to the
normal image for debugging purposes, it doesn't make
sense to artificially limit its maximum size.
(From OE-Core rev: 7cdf3b2444df8cd322d9eff1bdbdc5adddcaf22a)
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the hard float case, COMPATIBLE_HOST should be set to ".*-linux"
since OE can support multiple distro layers, not just poky.
(From OE-Core rev: ddcb08c6a8cb2187e98aa225b86777bb52c1d21e)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Define PV in order to avoid package version being plain "git". Use the
version number found from configure.ac plus the git revision.
(From OE-Core rev: 9d4734412c45ef80195707900b1dfdf843f43228)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this a whitelisted path containing /../ breaks the test for a file
allowed to be provided by more than one recipe.
Noticed when local.conf contains:
DEPLOY_DIR = "${TOPDIR}/../deploy"
|ERROR: core-image-minimal-1.0-r0 do_image_complete: The recipe
| core-image-minimal is trying to install files into a shared area when those
| files already exist. Those files and their manifest location are:
| .../poky/deploy/images/qemux86/README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt
| Matched in b'manifest-qemux86-linux-yocto.deploy'
(From OE-Core rev: d82acf20541463b14a811788d28fb1db3539885b)
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 58d6cd369a3316a6ba313a2f1982bde5d47c0608)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tasks for image recipes cannot be locked and should be excluded from eSDK
generated locked-sigs.inc. get_sdk_install_targets() was not returning right
image targets to be excluded incase of 'minimal' sdk. This change fixes the issue.
(From OE-Core rev: 46401034f017d234833997d2fb3122190f9029bf)
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By letting a recipe assign GI_DATA_ENABLED trivially there is a simple and clear
way to disable gobject-introspection for specific build configurations.
(From OE-Core rev: 75a5297369c7b04cef098e2a76f7f8f4781764aa)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By letting a recipe assign GTKDOC_ENABLED trivially there is a simple and clear
way to disable gtk-doc for specific build configurations.
(From OE-Core rev: 201e069625e3623ff71864f969664c6d5d3b1801)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 33b0d940b09a5ce1462476614213a58d3d62e80d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 79fe476be233015c1c90e9c3fb4572267b5551d1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The smart tests need createrepo to be in the native sysroot. It needs
to be one of the depends for testimage.
(From OE-Core rev: 2f1a44d33d9ecceef69d11ef92c5369314cb3bf5)
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reintroduces fixes and changes which were introduced in the original
gstreamer1.0-plugins-bad 1.8.1 upgrade commit.
* packageconfigs changed since GStreamer 1.6.3
(they often do between minor version increases like 1.6 -> 1.8)
* hls,tinyalsa packageconfigs moved into the .inc file
* vulkan packageconfig dropped since there are no vulkan libraries in OE
(libxcb alone is not enough)
* reintroduced glimagesink downrank patch (it was removed because it was
dangling before)
* fixed patch line numbers
(From OE-Core rev: ca3f9fbe21407685ed09c60bc4b991b5c6b448f4)
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since gstreamer1.0-omx follows the GStreamer versioning style, inherit
upstream-version-is-even for checking the upstream version of the package.
(From OE-Core rev: d4c40d7fed89435dcf6c883343adeff37153f19e)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using BBSERVER variable in checksum calculations causes
unnecessary rebuilds when running memres bitbake.
Whitelisted BBSERVER variable to prevent this unwanted
behaviour.
[YOCTO #10201]
(From OE-Core rev: c9d949053cc0de1d8fbf8be2fa7c2cc30383ea51)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When trying to re-test smart rpm tests. A fail arises
due to a linux user previously created upon the image.
We've added a few lines to delete such user and his home dir
when finishing test.
[YOCTO #9204]
(From OE-Core rev: d1a80ac434bb798634bbb792ff7df59148ec26be)
Signed-off-by: Edwin Plauchu <edwin.plauchu.camacho@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When processing buildstats we determine recipe name, epoch, version and
revision from the per-recipe buildstat directory name. One previous
patch made an assumption that package version starts with a number.
That might not be true because of a packaging mistake or whatever
reason. Thus, if a version starting with a number is not found, fall
back to the "old" method of just taking the second-last dash-delimited
part (the one before revision).
(From OE-Core rev: 936eb9aac055f1d4f41bb351477a0f5bebf76a0e)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libical build QA fails when libical is built for e.g. qemux86-64 already, and
is then built for generic86-64 in a way that install is re-run:
$ MACHINE=qemux86-64 bitbake libical
$ MACHINE=genericx86-64 bitbake -f -Cinstall libical
ERROR: libical-2.0.0-r0 do_populate_sysroot: QA Issue: libical.pc failed
sanity test (tmpdir) in path
[YOCTO #10223]
(From OE-Core rev: 0445e68fdbbba5c4efb6422c89ee864e4273b114)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
remotesensing.org domain has been taken over by someone unrelated.
There does not seem to be an up-to-date tiff homepage, but
osgeo.org is a reliable download site.
(From OE-Core rev: f544e1d10e9dc0f750efdb45a78ce9d5c9603070)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These were noticed by the use of bashisms (rm *.{foo,bar}) and lots of these rm
commands are deleting files which don't exist in the first place.
(From OE-Core rev: 52182efe70a8fb59b5640cd1cf2bdb55e77c0076)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpcre uses CCLD_FOR_BUILD as the name of the host command to use for
linking. This is not a standard autotools symbol but particular to this
recipe. We need to set it explicitely
(From OE-Core rev: 07023dcf5ab15d69a336b96b73e2b0089300727f)
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
version 5.4.1 of rpm was not properly distclean before release, which
causes problems when cross-compiling.
The previous version this recipe called make distclean, but that would
trigger a call to ./configure which would fail when no gcc is
available and make the whole do_configure fail further down the line
This patch manually removes the files from the recipe.
(From OE-Core rev: 6c9f61233f64356291a0c42761a833f3b151114c)
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KConfig infrastructure needs to build HOST binaries in order to
provide its infratstructure. Yocto needs to force the HOSTCC and HOSTCPP
variables to BUILD_CC and BUILD_CPP to make sure that the proper compiler
is used when compiling host binaries
(From OE-Core rev: 50fb24c889b6add053a5638a7367a8896dfebd8a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KConfig infrastructure needs to build HOST binaries in order to
provide its infratstructure. Yocto needs to force the HOSTCC and HOSTCPP
variables to BUILD_CC and BUILD_CPP to make sure that the proper compiler
is used when compiling host binaries
(From OE-Core rev: 4676525795c565855cadd992e4be68eba6bc8b01)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KConfig infrastructure needs to build HOST binaries in order to
provide its infratstructure. Yocto needs to force the HOSTCC and HOSTCPP
variables to BUILD_CC and BUILD_CPP to make sure that the proper compiler
is used when compiling host binaries
(From OE-Core rev: c710401a2af6488b38565e8ef32b48ed1cd0aa69)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cross-compilers are native recipes that need to be compiled by the host's
compiler. However they do not use native.bbclass
As a consequence, the various CC, CXX etc environment variables are not
correctly set and they will not honor the host compiler name provided
by the BUILD_* variables.
(From OE-Core rev: 110cc22614f92e848bbba9ecaa5e6f089f9a2749)
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new mechanism to probe v4l2 M2M devices was implemented in gst 1.8 series, in
order to get such devices probed we now need to enable v4l2-probe compile option
which upstream decided to keep disabled by default (unfortunately), see [1].
With this feature disabled, it is not possible to get v4l2 M2M device to work in
Gstreamer which is a common use case on many embedded platforms. This patch
enables this new option as soon as v4l2 support is enabled in gstreamer -good.
[1] https://bugzilla.gnome.org/show_bug.cgi?id=758085
(From OE-Core rev: c1f08c04a95f6ec089d4a62d90119df01c94cd80)
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The U-Boot binary is not an executable, it is a binary file,
set it's permissions to 0644 instead of 0755.
(From OE-Core rev: b75ef17a7cba1791b077968893ebd4a297547fd1)
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If two recipes both create the same users and groups, the
second recipe can delete items created by the first causing
things like "chown" to fail for the first recipe.
(From OE-Core rev: 936150306cb13022edcadf862947c357932e80ee)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you run:
MACHINE=A bitbake <image> -c testimage
MACHINE=B bitbake <image> -c testimage
and A has errors in parselogs, machine B can pick these up and cause
immense confusion. This is because the test transfers the log files
to cwd which is usually TOPDIR. This is clearly bad and this patch
uses a subdir of WORKDIR to ensure machines don't contaminate each
other.
Also ensure any previous logs are cleaned up from any existing
transfer directory.
(From OE-Core rev: ac8f1e58ca3a0945795087cad9443be3e3e6ead8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yucku hack around test failures which ultimately are caused by a race in
smartpm itself. Issuing smartpm commands in quick succession causes
races in package cache of smartpm on some systems. This patch mitigates
the problem by sleeping for 1 second after each smartpm command that
modifies the system.
[YOCTO #10244]
(From OE-Core rev: 4d268abc2fc892c5d34449f78c8e9f2b1a9d6bac)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Full package feed indexes overload a 256MB image so reduce the number of rpms
the feed. Filter to p* since we use the psplash packages and this leaves some
allarch and machine arch packages too.
[YOCTO #8771]
(From OE-Core rev: f352c3b71cbf50846c7de31046202296b38713cc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that gtk-doc-native works correctly, the gtk-doc class doesn't need to
depend on target gtk-doc.
(From OE-Core rev: 8dc4a45cc06fda29618f9f2379ed743dc0c536e3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building gtk-doc-native the m4 functions for autoconf should use
pkg-config-native instead of pkg-config so that they can find the native
tooling.
This means that it is possible to generate gtk-doc without building the target
packages.
(From OE-Core rev: 755724d9d5f023450392ae8025a0cb6264283028)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gstreamer common module ships a copy of gtk-doc.m4 that will be used in
preference to our patched form, so delete it before configure is executed.
(From OE-Core rev: 50768af29ce8524f7bae387996aaed657a1ff80f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The native recipe should not write files to $HOME/.cache as target, this can
avoid problems when multi builds are running on the same host like:
| File "./g-ir-scanner", line 66, in <module>
| sys.exit(scanner_main(sys.argv))
| File "../gobject-introspection-1.48.0/giscanner/scannermain.py", line 543, in scanner_main
| transformer = create_transformer(namespace, options)
| File "../gobject-introspection-1.48.0/giscanner/scannermain.py", line 389, in create_transformer
| symbol_filter_cmd=options.symbol_filter_cmd)
| File "../gobject-introspection-1.48.0/giscanner/transformer.py", line 54, in __init__
| self._cachestore = CacheStore()
| File "../gobject-introspection-1.48.0/giscanner/cachestore.py", line 61, in __init__
| self._check_cache_version()
| File "../gobject-introspection-1.48.0/giscanner/cachestore.py", line 89, in _check_cache_version
| self._clean()
| File "../gobject-introspection-1.48.0/giscanner/cachestore.py", line 141, in _clean
| self._remove_filename(os.path.join(self._directory, filename))
| File "../gobject-introspection-1.48.0/giscanner/cachestore.py", line 123, in _remove_filename
| os.unlink(filename)
| FileNotFoundError: [Errno 2] No such file or directory: '/home/pokybuild/.cache/g-ir-scanner/0a47aa95823c95a0b5d1bd610b60d02f35785f26'
| Makefile:3518: recipe for target 'GModule-2.0.gir' failed
(From OE-Core rev: d3c48ff7d19e86b2338b1778f9563969bba3d336)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Doing so will fail when x11 is disabled in particular.
(From OE-Core rev: 98a9a30abdc7b877be574ac5914ec02f16c00887)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gtk-doc also requires --enable-doc, so that is no longer configurable.
(From OE-Core rev: 32dd42e8930bf38abf280e04b4ee22c9a9a2fae9)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems to work under qemu-ppc now.
(From OE-Core rev: ef41d3c972786f0e9a48ef171a952af90a4cce59)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It fails with the same error as gobject-introspection
(From OE-Core rev: 6248ca13451101c32c754e20fc8e0fb802df7ef4)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For same reason that introspection is disabled: the transient binary goes into infinite loop.
(From OE-Core rev: b3d7ccae7e19047836f6c9423e4569dccf98d759)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gtk-doc requires gdk/x11/gdkx.h which is not available if gdk x11 backend is disabled
(due to jku's patch).
(From OE-Core rev: d1e9927ba145036cb56d7512026df1a8c21a85dd)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
check support is no longer disabled by default because it is a requirement
of gtk-doc support in gstreamer.
(From OE-Core rev: 628a849ff14e165b8c00c6649d042225f5a35732)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Libglade has been obsolete for several years and is used by nothing in oe-core;
it will be moved to meta-oe so that old recipes still present there continue to build.
(From OE-Core rev: 6e5fa40b00039e48709db51c56caf0fa42a83f8e)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is done similarly to gobject-introspection, but with much
less delicate hacking around the upstream way of working.
(From OE-Core rev: 1b5b429f63c323fcd46b7419a531689717a73b91)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gtk-doc relies on this to highlight source code snippets
(From OE-Core rev: 380f449bc1881a6e8592463c7eeda3655efb97ea)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than copying images, use the snapshot option to qemu. This fixes a regression
caused by the recent runqemu changes where the wrong images were being testes since
the image is copied without the qemuboot.conf file. This means the latest image is
found by runqemu rather than the specified one, leading to various confused testing
results.
It could be fixed by copying more files but use snapshot mode instead.
(From OE-Core rev: eab91997d415b0e690b3482749a32087e6a8b00a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current qemu instances all share the same MAC address. This shouldn't be an
issue as they are all on separate network interfaces, however on the slight
chance this is causing problems, its easy enough to ensure we use unique
MAC addresses based on the IP numbers we assign.
(From OE-Core rev: c01962bf88786dd84ad83cc1d315297607d29f7c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no runqemu-internal any more.
(From OE-Core rev: 14bacf7203ab7a638b67eb143225d8c75bbb703d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no runqemu-internal anymore, and it is a python script now
which requires several python modules.
(From OE-Core rev: 94cb6eaec37c07e7903143fb53a568ab0bf2fc5c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All qemu boards should be able to boot by runqemu.
(From OE-Core rev: 5174889d59a5d6da29b4290376010dd176767e1f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemuppc can use virtio networking and we may as well do so for better
prformance as we do under the other emulated hardware.
(From OE-Core rev: 8a82ded799be79eacb64cf313b6f2799a4f5ffab)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 2c8e5657cafafe848c7e7c714e5e73bb82799d65)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add qemuboot-mips.inc to reduce duplicated code, the various mips bsps
which can be boot by runqemu can require qemuboot-mips.inc
(From OE-Core rev: cb28128477e98ed7dc7a90dd197f6dd04cf75be0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add qemuboot-x86.inc to reduce duplicated code, the x86/x86_64 bsps
which can be boot by runqemu can require qemuboot-x86.inc.
(From OE-Core rev: b5ff3dda2a576ba7e5d68198ea6c6eb49cf80eb8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 73bccbbfc0f987fc82aca5411e15f62c02e5336c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_version_less_or_equal() will raise errors if
PREFERRED_VERSION_linux-yocto is None. For example, when we build
DISTRO = "nodistro", PREFERRED_VERSION_linux-yocto is not be defined
since it is defined in poky.conf, and then bitbake will
choose the higher version which is 4.8 currently, so set
PREFERRED_VERSION_linux-yocto to 4.8, otherwise, runqemu can't boot it.
(From OE-Core rev: fd31e30f97ee9bd128d5b7b748987b0a6427b279)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For kernels after 4.7, we need to ensure the DTB file for the kernel is
used by runqemu. Doing this conditionally based upon the kernel verison
being built seems to be the only way forward for this.
(From OE-Core rev: 4615764509234bfb206ffe4cd430653b88d46ec3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These info are from old runqemu.
(From OE-Core rev: f22f09f8e1bb24e92e9109fcd7a347277acedcce)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It saves vars in ${DEPLOY_DIR_IMAGE}/<image>.qemuboot.conf, and runqemu
will read it.
The bsp which can be boot by runqemu will inherit it.
(From OE-Core rev: 1675e9b89e00b875d0da13411a2a939aa4ba5298)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake qemu
This error shows up:
ERROR: qemu-2.7.0-r1 do_install_ptest_base: Function failed:
do_install_ptest_base
...
cp: cannot stat '...tmp/work/core2-64-poky-linux/qemu/2.7.0-r1
/qemu-2.7.0/tests/Makefile: No such file or directory
...
Commit 46e7b70699d8bf4db08c8bb5111974318dd5416d in qemu project
renamed tests/Makefile to tests/Makefile.include, we apply the
same change in recipe accordingly to fix this issue.
Fixes [YOCTO #10245]
(From OE-Core rev: 7009a9309051061455fa7237e09796ef12c9e308)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This upgrade can fix a qemuppc + openssh bug, the ssh connection maybe
refused or closed randomly, and it's not easy to reproduce. RP pointed
that this upgrade can fix the problem, and it does work in my local
testing.
* Update add-ptest-in-makefile.patch
* Drop backported patch 0001-configure-support-vte-2.91.patch
Here is the Changlog:
http://wiki.qemu.org/ChangeLog/2.7
(From OE-Core rev: 056ce17e168bf856ff95a6f659098403169cb889)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu 2.7.0 introduces kernel errors:
[ 2.310768] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[ 2.311338] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[ 2.311604] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[ 2.311835] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[ 2.312063] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[ 2.312323] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[ 2.314320] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[ 2.315363] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
Whitelist this for now since this is preferable to the random failures
we're seeing from qemuppc with 2.6.0.
(From OE-Core rev: 4d542cdc86c34f0f4a3dde8b0aab059bca76a9fb)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10146]
(From OE-Core rev: cd5d532bd2a3f409b9470591c8d6f6b21e5995dd)
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 1868db95819b45961cd7e8499ecace403e6bc91d)
Signed-off-by: Henry Bruce <henry.bruce@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provides configuration files for watchdog.
Add watchdog-config as a runtime dependence of watchdog and remove
watchdog.conf file from watchdog installation.
(From OE-Core rev: 6864ad2e863205472f8ea2057c61e949dc450151)
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a simplified version of the watchdog daemon. It only opens
/dev/watchdog, and keeps writing to it often enough to keep the kernel
from resetting, at least once per minute. Each write delays the reboot
time another minute. After a minute of inactivity the watchdog hardware
will cause a reset. In the case of the software watchdog the ability to
reboot will depend on the state of the machines and interrupts.
Installs wd_keepalive binary and enable initscript.
(From OE-Core rev: b76af8a0982c3c7473bd6ba067d1c8030d4d2f26)
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SRCREVs were previously updated to -rc5, but the LINUX_VERSION
was missed. As such, we are building and booting -rc5, but all the
packaging says -rc4.
Worth a quick update while we wait for -rc6
(From OE-Core rev: ea2f99161a22ae2e9eefd3b337c9af7704c33e37)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of build depending on pkgconfig-native, inherit pkgconfig
class which does the same thing.
(From OE-Core rev: 3a2b6b5ee1e43ec9c968062a3fbeb0e1a4630c18)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of DEPENDS += "pkgconfig-native", inherit pkgconfig class which does
the same.
(From OE-Core rev: dbaa536c569d728f47f949fedbab165b73c9985d)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
X startup is now handled in xserver-nodm-init.
(From OE-Core rev: 877851cf0f76a5052900954670fb64aed27a7a1f)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>