When buildinfohelper records the targets for a build, it looks
up any existing targets for a build and creates them if they
are not present. This is because in the case of Toaster-triggered
builds, the Target objects have already been created (inside
triggerBuild()) and don't need to be recreated; but in the case
of cli builds, the Target objects have to be created by
buildinfohelper.
The issue is that the code for retrieving an existing target for
a build only looks for Targets with a matching target and build,
e.g. Targets for build X with target "core-image-minimal". But it
is perfectly legitimate to call bitbake with a command like
"bitbake core-image-minimal:do_populate_sdk
core-image-minimal:do_populate_sdk_ext". In such a case, the
code which looks for matching targets finds two objects, as it
doesn't filter by task.
Add the task into the filter for the Target so that only one
Target object is be returned. Note that a command
line like "bitbake recipe:task recipe:task" will still cause an
error as bitbake doesn't de-duplicate the command line arguments
and will run the recipe:task combination twice.
(Bitbake rev: 1c0a689fdaae6469d4afb98583161073d32ea50b)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bzImage and modules files were previously attached to a build,
rather than to the target which produced them. This meant it was
not possible to determine which kernel artifact produced by a
build came from which target; which in turn made it difficult to
associate existing kernel artifact with targets when those
targets didn't produce artifacts (e.g. if the same machine + target
combination was built again and didn't produce a bzImage or modules
file because those files already existed).
By associating kernel artifacts with the target (via a new
TargetArtifactFile model), we make it possible to find all
the artifacts for a given machine + target combination. Then, in
cases where a build is completed but its targets don't produce
any artifacts, we can find a previous Target object with the same
machine + target and copy its artifacts to the targets for a
just-completed build.
Note that this doesn't cover SDK artifacts yet, which are still
retrieved in toaster.bbclass and show up as "Other artifacts",
lumped together for the whole build rather than by target.
[YOCTO #8556]
(Bitbake rev: 9b151416e428c2565a27d89116439f9a8d578e3d)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refactor retrieval of suffix from image file path, making it a
a method on Target_Image_File. This makes it easier to use this
in the build dashboard for individual images, plus reduces the
complexity of the code required to get all of the image file
suffixes for a build.
(Bitbake rev: 9c38de3dec74c122c2060cad37331bdafc6858ec)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the image and artifact scan code from toaster.bbclass and
consolidate its logic with the existing logic in buildinfohelper.
Remove handler setup for events which used to be fired from
toaster.bbclass but which are now handled directly by buildinfohelper.
[YOCTO #8556]
(Bitbake rev: f0085cd554604cfff4a3f40a34825fbb6878004f)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The build dashboard was showing the targets for the build in the page
heading and title as "Target object".
Add a filter which extracts the "target" from each Target object
as a string so that the heading and title display correctly.
Also sort the image file suffixes alphabetically.
[YOCTO #8556]
(Bitbake rev: 33a24992139e7dc05d14bbe1da60299b732945aa)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Runqueue errors direct the user to view the "failure below",
but no additional error message is available.
Log the stacktrace so that the user can see what went wrong.
Also fix a typo in the log message.
(Bitbake rev: e191f401e372ee181bc02250232ad9cb9a0e9477)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The OrderedDict's item is sorted by insertion order, there might be a
problem when build the same recipe again, for example:
- First build of acl:
Depends: libattr1 (>= 2.4.47), libc6 (>= 2.24)
- Second build of acl:
Depends: libc6 (>= 2.24), libattr1 (>= 2.4.47)
They are exactly the same depends, but tools like "diff" doesn't think
so. Return sorted OrderedDict will fix the problem.
(Bitbake rev: a392f19f16ef8202ce3c12afbeb186a02438da17)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a few places we use the fetcher code to fetch files outside of a
task, for example uninative in OE. In that case the pid of the event is
0 and that was causing an error in BBUIHelper.eventHandler(). Check the
pid and do nothing if it's 0.
(Bitbake rev: 59cb919e5cd5c653fb4d69b2d6a4320648443e10)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When bitbake executes a shell or Python function it can cd/chdir() into a
directory before executing the task. If no directory is specified then the
default of $B is used. However $B is an OpenEmbedded variable and BitBake
shouldn't be aware of it.
To solve this change the semantics slightly so that if no directory is
specified, the current working directory isn't changed. There's also a sanity
check that emits a warning if a Python task does os.chdir() without restoring
the old path, and the previous working directory is restored.
This does change semantics: whereas before a function in OE would have $B as the
working directory unless specified, now the working directory is the top of the
build tree. Any breakage this causes can be solved by either adding
do_some_task[dirs] = "${B}" or by using absolute paths in the task.
[ YOCTO #4634 ]
(Bitbake rev: 67a7b8b021badc17d8fdf447c250e79d291e75f7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The messaging FIFO is UTF-8, so decode the command as UTF-8 as well as the value
as otherwise "bberror" != b("bberror") and none of the messages from shell
functions are ever displayed.
Also add an else to the command parser so unhandled commands are noticed.
[ YOCTO #9947 ]
(Bitbake rev: 42d727743fa599e0a3c5ad2c29a1e6ede1a918bb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With Python 3 create_string_buffer needs a bytes() not a str() but as we were
catching all exceptions nobody noticed.
[ YOCTO #9910 ]
(Bitbake rev: 6576a9a95486c28a01d4211b4a33cc3e2c55a7cc)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the front end feature to delete a layer from the layer details page.
[YOCO #9184]
(Bitbake rev: 91815229f60eb9deba7d299f05c69b52ff1df59c)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also clean up flake8 warnings in XhrBuildRequest
(Bitbake rev: aa0845242eda8650a97180bf6675551c26554cde)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update, clean up and move the api for updating a layerversion from the
views to api. Also update the layerdetails page to include the
layerversion id in the url getter.
[YOCTO #8952]
(Bitbake rev: 20f4e23bc86290f0a42881a7cac44c41eafa86fc)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using toaster-eventreplay to run a bitbake event file
through toasterui/buildinfohelper, errors occur when the
tasks are updated with buildstats info:
RuntimeWarning: DateTimeField Task.started received a naive
datetime (2016-07-06 09:15:22.070000) while time zone support
is active.
This is because a method in buildinfohelper returns a naive
datetime, but Django is expecting timezone-aware datetimes.
Ensure that datetimes used to set the started/ended times on
tasks are converted to timezone-aware datetimes.
(Bitbake rev: df9f4337bec87024ea6a43138c6080a755eb7fab)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rewritten toaster-eventreplay to make code working as expected,
more compact and readable.
[YOCTO #9585]
(Bitbake rev: 45370a860b24a761d1b6e08ba752079cc45f54da)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
class MockConfigParameters has only one attribute and only __init__
method. Replacing it with namedtuple makes code less nested and more
readable.
[YOCTO #9585]
(Bitbake rev: 5d4df14b0d38f6c89ca16de6dada58b4bb015d71)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Event objects are represented by base64-encoded strings in
the event file and can't be loaded by existing eventreplay code.
Fixed the code of loading events from file by decoding base64 strings
into the binary form and loading them with pickle.load.
[YOCTO #9585]
(Bitbake rev: a55c280c167f84caed6518119246e5a55f56cfd4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stored event mask list as self.eventmask for future use.
Fixed Exception: Command setEventMask not implemented.
[YOCTO #9585]
(Bitbake rev: 2e09074c70e89402de8f883dd402cd729118fc7e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed AttributeError: 'MockConnection' object has no attribute
'getEventHandle'
[YOCTO #9585]
(Bitbake rev: 6deae30480a4288da0c8b3529e61f3495f260f24)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Command-line builds were displayed incorrectly, so that the
HTML elements for other builds were being "consumed" by the
command-line build elements due to incorrect positioning of
element end tags.
Fix by ensuring end tags close elements in the right places.
As the indentation was all over the place in the most recent
builds section template, it was almost impossible to see what the
problem was. So that was fixed, too.
[YOCTO #9842]
(Bitbake rev: 01659389813ad61d4f75b9f8d71528581322f0b0)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Worker needs input stream in binary mode as it reads binary content
from it. Current code does it by detaching a buffer from sys.stdin
and assigning it back to sys.stdin.
Detached buffer is io.BufferedReader in binary mode. This operation
is implicit as its purpose is not easily understandable from the code.
Replacing it with fdopen(sys.stdin.fileno(), 'rb') should make the
code more understandable.
Assigning the buffer to sys.stdin is not needed as worker doesn't
use sys.stdin. Moreover, it leads to difficult to debug issues down
the stack. For example, devpyshell doesn't work without reopening
sys.stdin in text mode. This is not needed anymore after this fix as
sys.stdin is not changed in worker code and remains in text mode.
(Bitbake rev: b26bcff4c4d72775f1def7e769015464953b955c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up and fix the most frequently built targets for the "Most built
recipes" section for the project configuration page.
[YOCTO #9846]
(Bitbake rev: 860475cfdd35301fb609ab3c89347566b0ca0adc)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some pages contain other build buttons which may have the same class
attached. Make sure that we only select the buttons in the tables where
layerBtn is used.
[YOCTO #9841]
(Bitbake rev: ec083fd943c6996307beb3be3421403870d2f2b7)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add basic tests to validate the value, user types
in the text box for DL_DIR and SSTATE_DIR. Added
test case to validate the first char and inclusion
of space between the characters.
[YOCTO #9646]
(Bitbake rev: 1531e98c5ae1693d11d692c3589df29dff9364df)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Validation logic on the project configuration page
prevented a user from adding ${variable} to these paths.
Update validation so a user can see a better message
when they type characters into the text inputs.
Two types of validation are implemented.
Either:
* The value should start with a "/", to allow absolute paths.
or
* The value should start with a "$", to allow bitbake
variables like ${TOPDIR}.
[YOCTO #9646]
(Bitbake rev: fca50153caef62a473d1812fd59ec7effe09f8c5)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove SSTATE_MIRRORS from getting blacklisted. Hence the SSTATE_MIRRORS
should be removed from projectconf.html file so that users can know that
this variable is no more blacklisted.
[YOCTO #9598]
(Bitbake rev: b060eecae417521d8340748e7ace7a77488bd596)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove SSTATE_MIRRORS variable from blacklists in views.py
This helps user to point mirrors using SSTATE_MIRRORS with
toaster.
[#YOCTO 9598]
(Bitbake rev: c3dd4fb193c80ed9a6dbddf7f6a1eadd0964ac8c)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init function of the parent class fires a progress event for 0
progress rather than a start event. UI code was assuming that progress
events should always have a start event first. This change ensures that
the start event is correctly generated.
This fixes crashes that were seen in knotty in some configurations.
(Bitbake rev: 9841651e050a3e9f395ab3c62545c51197734584)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mistakes can happen with the generation of the progress events, change
knotty to be more tolerant of this rather than crashing, reporting to the
user when something unexpected happens. I haven't debugged why multiple
finish events appear to be triggered.
(Bitbake rev: 7dd06b1016b36420a9c55a45ff29dd64ae1dbcda)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When "Preparing RunQueue" shows up you can expect to wait up to 30
seconds while it works - which is a bit long to leave the user waiting
without any kind of output. Since the work being carried out during this
time is divided into stages such that it's practical to determine
internally how it's progressing, replace the message with a progress
bar.
Actually what happens during this time is two major steps rather than
just one - the runqueue preparation itself, followed by the
initialisation prior to running setscene tasks. I elected to have the
progress bar cover both as one (there doesn't appear to be much point in
doing otherwise from a user perspective). I did however describe it as
"initialising tasks".
(Bitbake rev: 591e9741e108487ff437e77cb439ef2dbca42e03)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the ability to enter a mode where only a specified whitelist of
tasks can be executed outright; everything else must be successfully
provided in the form of a setscene task (or covered by a setscene task).
Any setscene failure outside of the whitelist will cause the build to
fail immediately instead of running the real task, and any real tasks
that would execute outside of the whitelist cause an immediate build
failure when it comes to executing the runqueue as well.
The mode is enabled by setting BB_SETSCENE_ENFORCE="1", and the
whitelist is specified through BB_SETSCENE_ENFORCE_WHITELIST, consisting
of pn:taskname pairs. A single % character can be substituted for the pn
value to match any target explicitly specified on the bitbake command
line. Wildcards * and ? can also be used as per standard unix file name
matching for both pn and taskname.
Part of the implementation of [YOCTO #9367].
(Bitbake rev: 624722c067a7fdd0c0f5d8be611e1f6666ecc4a2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Quiet output mode disables printing most messages (below warnings) to
the console; however these messages still go to the console log file.
This is primarily for cases where bitbake is being launched
interactively from some other process, but where full console output is
not needed.
Because of the need to keep logging all normal events to the console
log, this functionality was implemented within the knotty UI rather
than in bb.msg (where verbose mode is implemented). We don't currently
have a means of registering command line options from the UI end, thus
the option actually has to be registered in main.py regardless of the
UI, however I didn't feel like it was worth setting up such a mechanism
just for this option.
(Bitbake rev: db95cdef08e339dec7462bfde3ad7d75c1c60dd8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In addition to the "currently running n tasks (x of y)" message, show a
progress bar for another view on how much of the build is left. We have
to take care to reset it when moving from the scenequeue to the
runqueue, and explicitly don't include an ETA since not all tasks take
equal time and thus it isn't possible to estimate the time remaining
with the information available.
(Bitbake rev: de682015a3fefeff36ddc4197641a700f3fb558d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support code on the BitBake side to allow sstate.bbclass in
OpenEmbedded to report progress when it is checking for availability of
artifacts from shared state mirrors.
Part of the implementation for [YOCTO #5853].
(Bitbake rev: 070ae856da0715dbaf4c560c837ea796ffc29f00)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a class to help report progress in a task that consists of multiple
stages, some of which may have internal progress (do_rootfs within
OpenEmbedded is one example). Each stage is weighted to try to give
a reasonable representation of progress over time.
Part of the implementation for [YOCTO #5383].
(Bitbake rev: 751b75602872a89e8b1a7c03269bc0fdaa149c6f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For long-running tasks where we have some output from the task that
gives us some idea of the progress of the task (such as a percentage
complete), provide the means to scrape the output for that progress
information and show it to the user in the default knotty terminal
output in the form of a progress bar. This is implemented using a new
TaskProgress event as well as some code we can insert to do output
scanning/filtering.
Any task can fire TaskProgress events; however, if you have a shell task
whose output you wish to scan for progress information, you just need to
set the "progress" varflag on the task. This can be set to:
* "percent" to just look for a number followed by a % sign
* "percent:<regex>" to specify your own regex matching a percentage
value (must have a single group which matches the percentage number)
* "outof:<regex>" to look for the specified regex matching x out of y
items completed (must have two groups - first group needs to be x,
second y).
We can potentially extend this in future but this should be a good
start.
Part of the implementation for [YOCTO #5383].
(Bitbake rev: 0d275fc5b6531957a6189069b04074065bb718a0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we're going to make some minor extensions to it, it makes sense to
bring in the latest version of python-progressbar. Its structure has
changed a little but the API hasn't; however we do need to ensure our
overridden _needs_update() function's signature in BBProgress() matches
properly.
(Bitbake rev: c3e51d71b36cbc9e9ed1b35fb93d0978e24bc98a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you're looking to find the latest console log repeatedly it can be a bit
tedious - let's just create a symlink just as we do with other logs to
make it easy to find.
(Bitbake rev: e9f41c0507a6527bf2ed86506813d4d4a89f8ebf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some services such as SourceForge seem to struggle to keep up under load, with
the result that over half of the autobuilder checkuri runs fail with
sourceforge.net "connection timed out".
Attempt to mitigate this by re-attempting once the network operation on failure.
(Bitbake rev: 54b1961551511948e0cbd2ac39f19b39b9cee568)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise the function like d.getVarFlag(e, 'task', True) which is used by
do_listtasks will still get it, and list the deleted tasks.
(Bitbake rev: 779d73619daf59f76f5b0313e7fb5409f6e82553)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Restructured EventWriter code to make it more readable:
- got rid of init_file method as it's called only once
- renamed exception variable e -> err
- renamed event variable e -> evt
- simplified main 'if' structure of send method
(Bitbake rev: 31977e7bb98f676197c6cee66f6ab4c12d4dcbde)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
class EventLogWriteHandler is a simple wrapper class with only one
class member. Replacing it with namedtuple makes code less nested and more
readable.
(Bitbake rev: 7c5b6812d32d173df36e7f9fc1d877329e79f994)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to remove output file as it gets rewritten by
open(self.eventfile, 'w') anyway.
(Bitbake rev: 1fc9957837b7038dfb983217a3fcd880f143e3a4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pickle converts python objects into the binary form that can't be
decoded to text and therefore can't be converted to JSON format.
Attempt to convert event objects raises this error:
TypeError:
b'\x80\x03cbb.runqueue\nrunQueueTaskSkipped\nq\x00)...
is not JSON serializable
Encoded pickled event objects to base64 to be able to convert data
structure to JSON.
[YOCTO #9803]
(Bitbake rev: f18055237e6084f90f6221442e3ba021dcc59c50)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
EventLogWriteHandler object was created and used in
BBCooker.initConfigurationData.
This causes creation of multiple EventLogWriteHandler objects
and results in duplicated entries in the output event file
as BBCooker.initConfigurationData is called multiple times.
Added eventlogfile parameter to EventLogWriteHandler to avoid using
global variable DEFAULT_EVENTFILE.
Moved EventLogWriteHandler to the module level.
Created EventLogWriteHandler object in BBCooker.__init__ to ensure that only
one handler object is created.
(Bitbake rev: d3ad8eee850ec2df54aa09fae44cc7e69c12f32a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code is still a bit icky (and should be refactored to not use
Gdk.threads_enter/leave) but it should work about as reliably as
it did with Gtk+2.
Based on earlier patches by Maxin and Joshua.
(Bitbake rev: 8eee64a64144e27b5b8c2aca88e138882c3deab7)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove unused css file that still had the bootstrap v2 license in it.
(Bitbake rev: a8fe4177a6303aa57301c977c1daf7d4ff6ec586)
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In 2c88afb6 find_chains()'s taskid argument was renamed to tid but
taskid is still used as key to explored_deps dictionary. Use tid instead
of taskid.
(Bitbake rev: 29a34ae8f5306d2779bcc761c52f1f9d13a0c0c5)
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In recipes which use the perforce fetcher, enable use of SRCREV to
specify any of: ${AUTOREV}, changelist number, p4date, or label. This
is more in-line with how the other fetchers work for source control
systems.
Allow p4 to use the P4CONFIG env variable to define the server URL,
username, and password if not provided in a recipe.
This does change existing perforce fetcher usage by recipes and will
likely need those recipes which use the perforce fetcher to be updated.
No recipes in oe-core use the perforce fetcher.
References [YOCTO #6303]
(Bitbake rev: 6298696bb94a127cdec7964315f6891ba92cd026)
Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python 3 changed the return value of check_output to binary rather than
a string. This fix decodes the binary before calling splitlines, which
requires a string.
(Bitbake rev: 1072beefe172423873a22a10c7171e10d0401e1e)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The iterator used to create a search query refers to a
variable "x" which isn't set, causing an "'x' is not defined" error
and preventing table searches (on non-ToasterTables) from working.
Use the "field" variable instead, which contains the name of the
field to add to the query.
[YOCTO #9749]
(Bitbake rev: a3ebeb37f7bd4cffe6707c634b4f0a0ea52ccc45)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First parameter of traceback.format_exc is a 'limit' - a number
of stracktraces to format.
Passing exception object to format_exc is incorrect, but it works in
Python 2 as this code from traceback module works:
while tb is not None and (limit is None or n < limit):
Comparing integer counter n with the exception object in Python 2
always results in True. However, in Python 3 it throws exception:
TypeError: unorderable types: int() < <Exception type>()
As format_exc is used in except block of handling another
exception this can cause hard to find and debug bugs.
(Bitbake rev: a9509949d7e2adba6e3cd89f97daa19a955855b5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When parsing, we should reset the event handlers we registered when
done. If we don't do this, parse order may change the build, depending
on what the parse handlers do to the metadata.
This issue showed up as a basehash change:
ERROR: Bitbake's cached basehash does not match the one we just generated (
/media/build1/poky/meta/recipes-core/meta/nativesdk-buildtools-perl-dummy.bb.do_unpack)!
This is due to the eventhandler in nativesdk.bbclass being run, despite
this .bb file not inheriting nativesdk.bbclass. The parse order was
different between the signature generation and the main multithreaded
parse.
Diffsigs showed:
bitbake-diffsigs 1.0-r2.do_unpack.sigbasedata.*
basehash changed from 887d1c25962156cae859c1542e69a8d7 to cb84fcfafe15fc92fb7ab8c6d97014ca
Variable PN value changed from 'nativesdk-buildtools-perl-dummy' to '${@bb.parse.BBHandler.vars_from_file(d.getVar('FILE', False),d)[0] or 'defaultpkgname'}'
with PN being set by the event handler.
(Bitbake rev: 0219271d4130c1f4cf071c7577a4101c54c04921)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Another patch added migrations in the correct location (different date) so
these in the wrong directory can be removed.
(Bitbake rev: 8aa84abc952835792db1614b6fe2305ab9dca9e1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I'm not sure what possesed me when I wrote this code originally but its
indirection of everyting to use numeric IDs and position dependent lists
is horrific. Given the way python internals work, its completely and
utterly pointless from performance perspective. It also makes the code
hard to understand and debug since any numeric ID has to be translated
into something human readable.
The hard part is that the IDs are infectous and spread from taskdata
into runqueue and even partly into cooker for the dependency graph
processing. The only real way to deal with this is to convert everything
to use a more sane data structure.
This patch:
* Uses "<fn>:<taskname>" as the ID for tasks rather than a number
* Changes to dict() based structures rather than position dependent lists
* Drops the build name, runtime name and filename ID indexes
On the most part there shouldn't be user visible changes. Sadly we did
leak datastructures to the setscene verify function which has to be
rewritten. To handle this, the variable name used to specifiy the version
changes from BB_SETSCENE_VERIFY_FUNCTION to BB_SETSCENE_VERIFY_FUNCTION2
allowing multiple versions of bitbake to work with suitably written
metadata. Anyone with custom schedulers may also need to change them.
I believe the benefits in code readability and easier debugging far
outweigh those issues though. It also means we have a saner codebase
to add multiconfig support on top of.
During development, I did have some of the original code coexisting with
the new data stores to allow comparision of the data and check it was
working correcty, particuarly for taskdata. I have also compared
task-depends.dot files before and after the change. There should be no
functionality changes in this patch, its purely a data structure change
and that is visible in the patch.
(Bitbake rev: 2c88afb60da54e58f555411a7bd7b006b0c29306)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using positions in lists for flags is an odd choice and makes the code
hard to maintain. Maintaining a list is slow since list searches are
slow (watch bitbake -n slow massively with it) but we can use a set()
instead.
This patch uses python sets to maintain the lists of tasks in each state
and this prepares for changing the task IDs from being integers.
(Bitbake rev: 8c1ed57f6ea475b714eca6673b48e8e5f5f0f9c3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a number of selectors which have changed after the port to
bootstrap3. Also fix the modal wait_until_visible and returning of the
text for the radio buttons in the modals for edit custom image and new
custom image on the build dashboard.
(Bitbake rev: 5f80dac65f419825bd81a734273a2465d5a01bab)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use underscore instead of dash in the file name for the test settings.
Also fix the import of the settings module.
(Bitbake rev: 0bdfcafdd1e2ebc10dc0cd343c8bb77f09a71c90)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the selectors after changes made for bootstrap3 and table links being
removed.
(Bitbake rev: fccc8869dc465b49f236c15a9aa14b7d06694b8e)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Update the string for recognising a duplicate image recipe
- Fix an incorrect relative import
(Bitbake rev: 830743b1aa29a5ac220141e9c24b2592d6cebb29)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Get the ttTypeahead object on the input to see if it's been initialised
correctly.
(Bitbake rev: d382b2afb2939ae1b69a80ad083fb4c47303f8d0)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First parameter of traceback.print_exc and traceback.format_exc APIs is
a 'limit' - a number of stracktraces to print.
Passing exception object to print_exc or format_exc is incorrect, but
it works in Python 2 and causes printing only one line of traceback.
In Python 3 comparison of integer and exception object throws exception:
TypeError: unorderable types: int() < <Exception type>()
As these APIs are usually used in except block of handling another
exception this can cause hard to find and debug bugs.
(Bitbake rev: c5a48931ac8db9e56f978c50861c19d0d0c808e3)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed python to python3 in shebang to ensure that
manage.py is always run by python3.
(Bitbake rev: 3638b8e5390c36076e14c181e955505750031571)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix deprecation warning specify the parser used for creating the
BeautifulSoup object.
(Bitbake rev: d34546e88881e89588206877ebaea506cda4f6c2)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The view code for downloading image files used the "r" flag
to read the file, then used the open file object to form the
HTTP response.
While this worked in Python 2, Python 3 appears to be more strict
about this sort of thing, and Django throws a UnicodeDecodeError
when a file opened this way is used in a response.
Open the file with the "b" flag (binary mode) so that Django can
correctly convert the binary file handle to an HTTP response.
(Bitbake rev: c4d67968d0ec1d5ff53cdc0dccf6a7869c89597b)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, we didn't specify a specific version of Selenium.
When upgrading to Python 3 and installing Selenium to work with it,
the JS unit test broke, as the report format produced by Selenium
had changed.
Modify the test so that it works with the latest Selenium report
format.
Add a note to the README that the given Selenium version should
be used to prevent unexpected test failures.
(Bitbake rev: 571c2b70d3c123614618672ce7532bb5f4c36630)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code previously imported urllib to make use of querystring
quoting, but was modified to support Python 3. During this
process, the reference to urllib was not fixed, which resulted
in table filters breaking.
Remove the reference to urllib (which is no longer imported)
and instead reference the imported unquote_plus() function.
(Bitbake rev: f66ee686d4e3002a4a38a7424bcc605a6df9db0b)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed unneeded code as it causes the following error in Python 3:
TypeError: expected bytes, bytearray or buffer compatible object
(Bitbake rev: 1626e986820da626c19aa8c664155a2cb1db8fd9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python 3 complains about 'wa' mode this way:
ValueError: must have exactly one of create/read/write/append mode
Fixed by using 'a' mode.
[YOCTO #9584]
(Bitbake rev: eb23a84e079125a08d0c8e910f7035ad9584c432)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Decoded response content to str to pass it to json.load as it breaks
in Python 3 with this error:
TypeError: expected bytes, bytearray or buffer compatible object
[YOCTO #9584]
(Bitbake rev: 3566ecc3ae682358d1fc58bdc0bed5cbed5e9608)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly use python3 so that the modules for python3 are checked.
(Bitbake rev: e7951541c34c5561187110ba0ec69b9c45022747)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the 'outcome' filter for tasks, remove the 'not applicable' option,
since it should not be exposed to users.
(Bitbake rev: 4e21817b0d7a91e634bdb2069850627c38fde053)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The explanatory message in the empty state of the packages built table
was missing some spaces.
(Bitbake rev: 70f600f86ec4d536004d968919e86d2afa58d585)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure the current page is always highlighted in the left navigation.
(Bitbake rev: 3d7f5d6ae843bcc3b5af1a9414ab5cb2759d0853)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Port all the pages in the build analysis area to bootstrap version 3.
(Bitbake rev: f963b73f0bf32db2df39dd79d8d85184c280cda0)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Design change to have no links for non-named fields in BuiltPackagesTable.
BuiltRecipesTables and BuildTasksTable.
Additionally:
- Fix class and elements for Bootstrap3 in help text.
- Change title of InstalledPackages table to Packages Included.
- Change which columns are default shown/hidden columns.
(Bitbake rev: 7c377e161a90184a4786e33951d8c0e30688ba3b)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'k' was replaced by 'key' at some point but not fixed in the
body of the loop. This caused a failure when the the query
was constructed for a filtered queryset, due to the variable
not being defined.
(Bitbake rev: 37fb9a364e645baadda30cc74a18baa565f39857)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In some pages of the UI, the UI tests failed because parts of
the UI which should be visible were being reported as not
visible by the Selenium PhantomJS driver.
On investigation, it turns out that PhantomJS uses a very narrow
default window. This meant that some parts of the UI were being
clipped and were thus not "visible" to the driver, causing test
failures (specifically, on the new custom image page).
Ensure that the window is maximized before running tests to
prevent this happening.
(Bitbake rev: 3f61bef9359926211be7a3177a2071963726ead5)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After porting the build table to a unified mechanism for showing
dependencies in tables it highlighted that the dependencies selected to
be shown were un-filtered. i.e. all dependencies from all contexts were
shown. The context for a package's dependencies is based on the target
that they were installed onto, or if not installed then a "None" target.
Depending on where the template for the dependencies are show we need to
switch this target which is why a filter and utility function on the
model is added.
Additionally to use the same templates in the build analysis we also
need to optionally add links to the build data for the packages being
displayed as dependencies.
Customising a Custom image recipes may or may not have a target
depending on whether they have been built or not, if not we do a best
effort at getting the dependencies by using the last known target on
that package to get the dependency information.
[YOCTO #9676]
(Bitbake rev: 31e7c26cc31a7c8c78c1464fa01581683bfd2965)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a cell template rendering causes an exception catch it and carry on,
this at least allows the table to show the rest of the data if nothing
else. Also improve the error logging so that it's possible what the
offending template snippet was.
(Bitbake rev: 566b4fbe9cfe4c6c0605c4f6444083ee4cf8b958)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Add new build tables to be tested
- Add required data into the fixture and clean up a few empty fields
- Fix the SoftwareRecipesTable specific test so as not to rely on two
particular defined recipes
(Bitbake rev: 7cf23671659666b27b5629fecd5f947f9bdb94e0)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As in the old build tables it's useful to jump and highlight a
particular row in the table using the #hash in the URL.
(Bitbake rev: 927bfc26ffcb0eb6c0a5b3c0905b7efc2f19b9a2)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Port the Task based tables to ToasterTable. This is the Task, Time, CPU
usage and Disk I/O tables.
(Bitbake rev: bebcef7a4bf08b10e472475435ddc7a524364adb)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the table that displays all the packages built in the build.
Build -> Packages. Adds a template snippet for the git revision popover.
(Bitbake rev: df62f38ff4e634544c9b1e97c5f6ca45e84a4f1e)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure we can create empty states for toaster tables that include
actions for users to get out of the empty state. Allows a template to be
used as an empty state.
(Bitbake rev: 9f21a1781345a2d2757616a9ab6f34ec48e9e93d)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Convert all the HTML templates, JS and CSS in the project parts of
toaster to use bootstrap 3.
(Bitbake rev: 69527a731eada699d3f604ff8f3ae9410981ba9b)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Twitter typeahead.js library expects the developer to use
a source which does a local search for matching suggestions, then
falls back to a remote search if that doesn't return enough
results.
However, in Toaster, we don't do any caching of the suggestions
for a typeahead, so our source only works in asynchronous mode.
Consequently, we see fewer than the expected number of suggestions
if the typeahead has already shown suggestions matching a query.
For example, searching for "meta-n" in the layers typeahead will
show the results for this query; but when the query changes to
"meta-ne", a new set of results is fetched, which mostly overlaps
with the results for "meta-n". The typeahead assumes that the
overlapping items are locally cached and have been delivered
synchronously, and just appends the new results which don't
overlap with the previous query. But because we don't provide any
results synchronously, we just end up with the single
non-overlapping result in the drop-down.
This can be fixed by hacking typeahead.js so that instead of
appending asynchronous results, we always overwrite and redraw
the whole typeahead menu.
This is a temporary fix, and should be properly fixed (when we
have time), perhaps by using typeahead.js's associated Bloodhound
library.
Added a note about the hack to the license file as an explanation
of why the unminified JS file is included in Toaster.
(Bitbake rev: afbaf326e1123c92952fa71e0e820a4ff83488ca)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Migrate from Bootstrap 2's built-in typeahead to Twitter's
typeahead library.
This is to facilitate moving to Bootstrap 3, which doesn't have
a typeahead.
(Bitbake rev: 0748177b40188a6fb735fe1ba1c17294afa4a3d0)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a helper class for running build tests. Subclass this and call the
build method to get setup for running tests on the resulting data from a
build.
(Bitbake rev: 2cafb16033b2f38156e6e0a74c02120f87a4fa92)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* In the custom images table, show the recipe file and download icon
only when the recipe file exists and can be downloaded.
* Also in the custom images table, make sure the download icon tooltip
shows on hover.
* In the custom image details page, show the correct icon (download)
next to the recipe file in the right hand column.
* In the custom image details page, show the recipe file and download
icon in the right hand column only when the recipe file exists and can
be downloaded
* Also in the custom image details page, simplify the help text we show
when the 'download' button is disabled: it gave so much information about
what's actually happening under the hood that it was a bit hard to
follow.
(Bitbake rev: 5d4172bc005efe209de595f6a151ae9ed062d051)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the tests are complete add some marker elements to the test page
DOM which can then looked at for a selenium browser test.
(Bitbake rev: 81798ab046b0717614e28e0a339172f3803e451b)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
DeprecationWarning: The 'warn' method is deprecated, use 'warning' instead
(Bitbake rev: a3f464d202dafef4538e66c008cdecb7b8709ed1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a line like:
foo=${@' '.join([d.getVar('D', True) + x for x in (' '.join([d.getVar('FILES_bash-' + p, True) or '' for p in ['lib', 'dev', 'staticdev', 'doc', 'locale', 'ptest']])).split()])}
is added to a function like do_install, it fails with Exception name 'd'
is not defined. This is due to a change of behaviour in python 3 compared
to python 2. Generator expressions, dict comprehensions and set comprehensions
are executed in a new scope but list comprehensions in python 2.x are not. In
python 3 they all use a new scope.
To allow these kinds of expressions to work, the easiest approach is
to add 'd' to the global context. To do this, an extra optional parameter
is added to better_eval and we use that to add 'd'.
(Bitbake rev: 8f74881037bb01013d3d439dc0c269909a198c1c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The functionality of BBPOSTCONF and BBPRECONF was added in
commit 21b314d4d1 but there
was a typo in the variable name that raises an exception
in bitbake.
[YOCTO #9235]
(Bitbake rev: 6d1379c8818400e5cdc442e6142f08a110fd5b95)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"hash() is randomised by default each time you start a new instance of
recent
versions (Python3.3+) to prevent dictionary insertion DOS attacks"
which means we need to use hashlib.md5 to get consistent values for
the codeparser cache under python 3. Prior to this, the codeparser
cache was effectively useless under python3 as shown by performance
regressions.
(Bitbake rev: 12d43cf45ba48e3587392f15315d92a1a53482ef)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No functionality change, just avoids function call overhead in a
function which loops heavily.
(Bitbake rev: 633c0c19f87a92497a7e9771811cdc953e1b7047)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
deb packages in modern Debian versions have the data tarball compressed
with xz rather than gzip, and thus explicitly extracting data.tar.gz
fails. Unfortunately ar doesn't support wildcards matching items to
extract, so we have to find out what the name of the file is first and
then extract it, relying on tar to figure out how to unpack it based on
the filename rather than doing it with pipes and making that
determination ourselves.
(Bitbake rev: 17ff08d225a8fa7faffd683c028369574954fba9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously the code used to match a reference to its SHA-1 in
_latest_revision() used the Python "in" operator, which made it match
if the reference matched the beginning of an existing tag or
branch. This test, however, must be exact. I.e., either the reference
matches a tag or branch exactly, or it does not match at all.
(Bitbake rev: e5986c78a6108fd7578989c20efcbf0b81c97e03)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makes it easier for user to identify problems, e.g. typos, in BBLAYERS.
[YOCTO #9507]
(Bitbake rev: 32c9689e4b492dc5821749e284e397d717af2a6c)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need to parse all recipes just to show the list of layers,
since that comes straight from the configuration, so save a bit of time
by not doing so. (A minor regression that came in with the the
bitbake-layers refactoring).
(Bitbake rev: a609ad7d560260a8d50dfa197cd960f496c5da73)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly used python3 as default python for oe builds
will continue to be python2.
[YOCTO #9584]
(Bitbake rev: fde5c962cb69a11b072d1f238c2371a5137d030d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some functions have been moved from urllib to urllib.parse
in python 3. Modifying the code to import unquote, urlencode and
unquote_plus from urllib.parse if import from urllib fails should
make it working on both python 2 and python 3.
(Bitbake rev: b91aa29fa20befd9841678a727bb91100363518f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mru is a list. It has a count method, but it differs from the
one for the queryset. Using mru.count causes 'Latest project builds'
section to silently disappear when toaster runs on python 3.
(Bitbake rev: c3ff90c9f028bff5733ebac7b5e72a4688addd3e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Division operator works differently in Python 3. It results in
float unlike in Python 2, where it results in int.
Explicitly used "floor division" operator instead of 'division'
operator. This should make the code to result in integer under
both pythons.
(Bitbake rev: 0c38441ed99b49dae8ef9613e320f0760853d6aa)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit causes buildinfohelper to crash when run on python 3
as python 3 doesn't have unicode builtin function.
This reverts commit 7a309d964a.
(Bitbake rev: 750ca5c8d5a25fc519b75c56352dec7823c7e240)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added use_builtin_types parameter to XMLRPCProxyServer.__init__
to fix this error:
ERROR: Could not connect to server 0.0.0.0:37132
: __init__() got an unexpected keyword argument 'use_builtin_types'
(Bitbake rev: ceb6e5bd33a25c45c2afe1559b9394c466db8a92)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using empty BITBAKE_UI environment variable causes bitbake server
to fail with the error:
FATAL: Unable to import extension module "" from bb.ui
Valid extension modules: knotty or toasterui\n'
Used BITBAKE_UI="knotty" when starting and stoping bitbake
server to solve above issue.
(Bitbake rev: b9a9ddfb6f53259be214032fb93812149d0cce19)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created two new migrations due to the models changes made
in python3 patchset.
(Bitbake rev: 9a6b211b2e15734379186408995851b50a2e0805)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved import xmlrpc module to the place where it's used
to avoid toaster crashes when importing bitbake code.
NOTE: This patch is made to be able to partly test toaster
with bitbake from master. It can be removed as soon as bb.server.xmlrpc
is ported to python 3.
(Bitbake rev: 0c5d691746fb02807568a8a470969a0b68e21915)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used 'rb' mode to open files to avoid unicode error when code
runs on python 3:
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x80
in position 44: invalid start byte
[YOCTO #9584]
(Bitbake rev: 1414866b84fe1fd674ea79500cd62eda3aa30b33)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
translate has different set of parameters in python 3 and
can't be used the way it's used in toaster api module.
Replacing it with re.sub() should make the code work in
both python 2 and python 3.
[YOCTO #9584]
(Bitbake rev: 7cc3a41139abc5b8d1eef4376fb19aba3910ce0d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
map returns map object in python 3. Replaced calls of
map to equivalent list comprehensions in the code which
requires lists.
[YOCTO #9584]
(Bitbake rev: d41eb6d6c061cb35ec1ecd899f856876f9077167)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used items() and range() APIs instead of iteritems() and
xrange() as latter don't exist in python 3
[YOCTO #9584]
(Bitbake rev: 372dd3abcb201bd9ac2c3189c5505d3578ce0dd0)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Decoded binary data to utf-8 to fix the following
error when runnign on python 3:
TypeError: Type str doesn't support the buffer API
[YOCTO #9584]
(Bitbake rev: 752ea00919ef054622a51ce097923309934eff2b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed dependency to argparse and wsgiref as they're in
standard python library.
wsgiref crashes during installation with python 3 as it's not
compatible with python 3.
Added dependency to pytz as it's used in the toaster code.
(Bitbake rev: 46f185afaaef74c566eec6d8fc1edc68a3b96b32)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced local imports with absolute imports.
Used .module for local imports.
This should make the code to work on python 2 and python 3.
[YOCTO #9584]
(Bitbake rev: 3f1e68c783308dcb51242d0fdeef758e581ccc8c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some APIs have been moved to other modules in python 3:
getstatusoutput: moved from commands to subproces
urlopen: moved from urllib2 to urllib.request
urlparse: moved from urlparse to urllib.parse
Made the imports work for both python versions by
catching ImportError and importing APIs from different
modules.
[YOCTO #9584]
(Bitbake rev: 1abaa1c6a950b327e6468192dd910549643768bb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced compicated calls of reduce with more clear code.
As reduce was removed from python 3 this change is mandatory
for the code to work on both pythons.
Here is an example change for illustration purposes:
original code:
querydict = dict(zip(or_keys, or_values))
query = reduce(operator.or_, map(lambda x: __get_q_for_val(x, querydict[x]), [k for k in querydict])))
replaced with:
query = None
for key, val in zip(or_keys, or_values):
x = __get_q_for_val(k, val)
query = query | x if query else x
[YOCTO #9584]
(Bitbake rev: 249d0bc6094ec9f369a02b78d8ed634a239e5ee4)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Usage of force_bytes in BuildRequest.__str__ method caused
python 3 to throw "__str__ returned non-string (type bytes)"
error.
Replaced force_bytes with force_text to make the code working
on both python 2 and python 3.
[YOCTO #9584]
(Bitbake rev: 9dd9c1393a84d1110c647e84253af8e0bb6acc45)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The upgrade to python3 is the final nail in the coffin for image-writer
and the goggle UI. Neither seem used or recieve patches and are based
on old versions of GTK+ so drop them, and the remaining crumbs support
pieces.
(Bitbake rev: ee7df1ca00c76f755057c157c093294efb9078d8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable the problematic gtk usage for use with pygtkcompat. The following
commit removes these tools/UIs entirely but we may as well leave this
piece in the history in case anyone does want a starting point for reusing
them.
(Bitbake rev: c53c7418d392452450352ca2175667dbdbd92401)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
get_context was added to mutliprocessing as part of 3.4.0
(Bitbake rev: 710351610e3ca4a1b61abc67564f84907e9b2f1c)
Signed-off-by: Jeremy Puhlman <jpuhlman@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This seemingly convoluted syntax doesn't work in python3. Instead
use the chained exception handling syntax which appears to make more
sense here.
(Bitbake rev: b19a4c5166303b1fa680582adf63e6a5564bfb4c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various misc changes to convert bitbake to python3 which don't warrant
separation into separate commits.
(Bitbake rev: d0f904d407f57998419bd9c305ce53e5eaa36b24)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade to 4.4.1 which has been run through 2to3 as per the maintainers
recommendation for v3 use.
(Bitbake rev: 2f4b98af93c971a8c466ffaf3c09cca0edb6e3ad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Under python the type conversions can mean there are float values
used for triggering the parse progress events which then fails.
Add an explict int() conversion to ensure the parse events are
generated under python3.
(Bitbake rev: 138329c58e92744c56aae3ab70ceeef09613250c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Task.SSTATE_NA and Task.SSTATE_MISS are both valid conditions for the
condition that a Task.OUTCOME_COVERED and Task.OUTCOME_PREBUILT.
(Bitbake rev: acac9bf660ac5939beb64d7b8d55541dea1c7b4e)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a port of the oe self test to the django test framework from
oe-core meta/lib/oeqa/selftest/_toaster.py
(Bitbake rev: 94418b1b2f9466d35461acdb982fd6b130b2331c)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a helper class for running build tests. Subclass this and call the
build method to get setup for running tests on the resulting data from a
build.
(Bitbake rev: d1882371cae6b9a8296ea739e6e46ca6a6dc9da8)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When running certain tests we want a particular database specified.
When bitbake toaster ui is being tested pass it these test settings so
that it uses the same database as the unit tests running.
(Bitbake rev: c52e34cac4362ba0a3cb3ea1fcb639e1d802aa85)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the execution sequence for a build out of the polling loop and into
it's own fuction. This means that we can call the function on it's own
if we just want to trigger one build rather than infinite polling.
This is something needed for the build tests.
(Bitbake rev: e8e059602c31394a4be5293e2ca0b8434fb4a8cf)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need to pass the DATABASE_URL around and read it back if we
setup the django framework in the correct way.
We make the default sqlite database path a full path so that the
database isn't being assumed to be in CWD.
Also add some more useful comments on the database settings.
This is preparation work to migrate the build tests and be able to
trigger builds on differently configured databases.
(Bitbake rev: 973c740404ca6a09feea250d3433075995067fe0)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add basic tests to validate the value user types
in the text box for IMAGEFS_TYPES. Added a test
case to show the checkbox get automatically selected
when user types value available in the check list.
Added a test case to verify if the check box is enabled
then the text box should also get updated accordingly.
[YOCTO #7828]
(Bitbake rev: 62c74eb38f44d98b40427edf56e40785b076a938)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a label to clarify the purpose of the first input field, replace <p>
with <label> for the second set of controls, and give some top margin to
the validation message.
(Bitbake rev: 99b1b52fe4f2b593d7835d2db64eb028ed42600a)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This functionality helps users to add custom
image fs types available other than the checkboxes
in the UI. User can add imagefs types in the text
box and use them in the build.
[YOCTO #7828]
(Bitbake rev: c14cbb026598be064f08f46bb513456c7a3089f5)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use open() instead of file() and close files when finished with them.
(Bitbake rev: 033c5a16ff19781ed793c2d97d285884017a2a4e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously we only tracked the flags (minus excluded) of variables we depend
on, but not the flags we use explicitly.
(Bitbake rev: bdeb3dcd7c92e62a7c079e7b27048c4114f24a3a)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable is a regex-escaped version of LAYERDIR, for safer use in
BBFILE_PATTERN, so as to avoid issues with regex special characters in the
layer path.
[YOCTO #8402]
(Bitbake rev: 72900522778b6ff08b135bf8bb97dff3f1a20bd9)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's useful to see tracebacks for ExpansionErrors, but only if we skip the
leading bitbake-internal elements, otherwise we see elements of the expansion
process.
As one example:
Before:
ERROR: ExpansionError during parsing /scratch/yocto-new/external-as-needed/poky/meta/recipes-core/glibc/glibc-locale_2.23.bb: Failure expanding variable PV[:=], expression was ${@get_external_libc_version(d)} which triggered exception AttributeError: 'module' object has no attribute 'external'
After:
ERROR: ExpansionError during parsing /scratch/yocto-new/external-as-needed/poky/meta/recipes-core/glibc/glibc-locale_2.23.bb
Traceback (most recent call last):
File "PV[:=]", line 1, in <module>
File "/scratch/yocto-new/external-as-needed/meta-sourcery/recipes-external/glibc/glibc-external-version.inc", line 3, in get_external_libc_version(d=<bb.data_smart.DataSmart
object at 0x7f05d2566950>):
sopattern = os.path.join(d.getVar('base_libdir', True), 'libc-*.so')
> found_paths = oe.external.find_sysroot_files([sopattern], d)
if found_paths:
ExpansionError: Failure expanding variable PV[:=], expression was ${@get_external_libc_version(d)} which triggered exception AttributeError: 'module' object has no attribute 'external'
(Bitbake rev: 7ff5b9eed82b7f4fd138fc6d746a0b79efbea98a)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This uses bb.utils.load_plugins, based on the plugin handling in recipetool
and devtool in oe-core.
(Bitbake rev: 5e542df9b966a99b5a5b8aa7cf6100174aff54b2)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to flush the footer removal, else it may not be outputted until
the buffer is flushed as part of StreamHandler and this would lead to
it removing the ERROR output just printed which is extremely confusing.
Also ensure the footer is cleared before printing a summary as in
some cases it wasn't being removed, also leading to user confusion.
(Bitbake rev: 0e030c4d074c41859608dab5f3ad26b05f56b306)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The signature data file comparison functions are meant to be able to
handle data files containing just the base hash data. This had regressed
in some places so add fixes to allow these comparisons to be made. The
runtime components in the data files are optional.
(Bitbake rev: 2a6659fd748e255a02c2f9d047829d6edfe65317)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
knotty captures two levels of keyboard interrupt: a single interrupt
or two interrupts in a row. These then trigger stateShutdown
and stateForceShutdown respectively.
toasterui doesn't have an equivalent way of capturing interrupts and
using them to shut down bitbake. Now that we are no longer using
knotty + XMLRPCServer for our command line builds (since switching to
per-project build directories), we see some odd side effects of this,
such as builds continuing after they have been interrupted on the
command line.
Bring toasterui in line with knotty (copy-paste most of the code
in knotty.py which deals with interrupts) so that a keyboard
interrupt actually shuts down the bitbake server (if not in
observe only mode).
Additionally use the cancel_cli_build() method to set the Build
status to CANCELLED in Toaster's db when we get keyboard interrupts.
This means that builds interrupted on the command line show as
cancelled (same as if they'd been cancelled from the Toaster UI),
as specified in the UI designs.
[YOCTO #8515]
(Bitbake rev: d39d2edca95900da433074ee95a192d7bfe7090d)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will be used from toasterui to cancel the current command-line
build when a keyboard interrupt is captured.
[YOCTO #8515]
(Bitbake rev: 1486c770327b53bb5e04baa5f3ea26d8154aed63)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After clean ups remove api assumptions. Our table data often contains
html snippets to display certain things such as dependency pop overs or
simply links to other parts of the UI. Take these into account when
testing the values of the table data.
(Bitbake rev: 7f61a68f2caba538e302ca9c2727bb43a6c77c64)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Remove the unused 'computation' field
- Remove the code to try to make the tables behave like an api
- Remove custom JSON encoder in favour of DjangoJSONEncoder
- Simplify get_data and add comments
- Add exception type instead of using generic Exception
- Clean up python style warnings
(Bitbake rev: 16d8198e8f6668c5fa5467ff4bda86c5d66a6cad)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used except 'except (<exception1>, <exception2>):' syntax as it's
supported by python 2 and pythone 3.
Old syntax 'except <exception1>, <exception2>:' is not supported
by python 3.
[YOCTO #9584]
(Bitbake rev: d19e305ffa44a848b02ede63dc5de8d2640089e6)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used print() function instead of print statement
to make toaster script to work with both python 2 and python 3
[YOCTO #9584]
(Bitbake rev: 09d37ee51219edcd0be6fd24c82fce392533b39b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dictionary method has_key is deprecated in python 2 and absent
in python 3.
Used '<key> in <dict>' statement to make the code working on
both python 2 and python 3.
[YOCTO #9584]
(Bitbake rev: 3d7ad7ba0d1a6f688ae885817c049f2a8ced11b5)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if the server dies, its possible that log messages are never
displayed which is particularly problematic if one of those messages
is the exception and backtrace the server died with.
Rather than having the event queue exit as soon as the server disappears,
we should pop events from the queue until its empty before exiting.
This patch tweaks that code so that even if the server is dead and we're
going to exit, we return any events left in the pipe. This makes
debugging certain failures much easier.
(Bitbake rev: 29f6ade68fb2b506a23a7eb3a00cdcffa291b362)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now the event is sent unconditionally we can drop this feature
as its no longer needed.
(Bitbake rev: 473deeb0fc6065693e1fcfcbb8b79753103db537)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The data included in the event is useful for implementing a pre-build
check that warns about unexpected components, for example because of
an incorrect configuration or changed dependencies.
Such a check can be done in a .bbclass that gets inherited
globally. But in contrast to a UI, such a class cannot request that
the event shall be emitted, and thus the event has to be emitted
whether there is a consumer or not.
This was done conditionally earlier out of concerns about the
performance impact. But now events are handled more efficiently, so
that concern no longer seems valid: in some simple testing (admittedly
on a fast build workstation), the two lines (generating the data and
emitting the event with it) only took about 0.05 seconds (measured
with timeit). That was for a build with roughly 500 recipes (from
pn-buildlist aka depgraph['pn']), triggered via the command line. That
was even with a consumer of the data active and doing some work, so it
should be even faster when there is no consumer.
(Bitbake rev: 5ddaf5b7ed1001d2dd3f67e7a6d704afa85479d2)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using MySQL, the project builds info delivered by MySQL
differs from that delivered by SQLite: the former returns text
values from the enumeration for Build outcomes, while the latter
returns the integer value. This causes the progress bar JS to
break, as it is expecting outcome strings.
Modify the recent_build() method to include an outcomeText property
for each Build object, then use this in the conditionals in the
progress bar JS.
[YOCTO #9498]
(Bitbake rev: 7ac374adf1cc70173ff6cc492bc078bba1cf500b)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the cooker fails to start, ensure a correct exception is displayed to the
user. After handling any queued events simply re-raise the original exception
else the output can be unclear.
(Bitbake rev: 9a4db1aa608c17d31bf5ea1cab5a99beb565dd83)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The string formatting wasn't correct and we should exit if we hit
errors here similar to the other exception handlers.
(Bitbake rev: b90a16408a5c45ce5312384f278e19d09f8dda4d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python3 can't cope with the previous approach we were using to pass
exceptions through the RPC. Avoid this by creating a formatted exception
on the sender side.
(Bitbake rev: d7db75020ed727677afbad07a90fb3eac0bf2c45)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, the dict can reorder causing sanity test failures.
(Bitbake rev: ca8c91acc9396385834b266d4e8b84d917e5e298)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids a deprecation warning in python 3.
(Bitbake rev: bf1a92d0c002d73e8a34472dced1343dc4a4251a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure we pass the string parameter correctly.
(Bitbake rev: 7ed82bd1fe7bdd93b0614119c42eb218dc5d83e6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Under python 3, if we spawn python processes, we need to have a UTF-8
locale, else python's file access methods will use ascii. You can't
change that mode once the interpreter is started so we have to ensure
a locale is set. Ideally we'd use C.UTF-8 since OE already forces the
C locale but not all distros support that and we need to set something.
Was tempted to choose en_GB so colour gets spelt correctly :).
This is in some ways pretty nasty, forcing it into the environment
everywhere however we only have a limited number of ways of making
everything work correctly and this beats having to add utf-8 encoding
to every file access command.
A similar change will be needed to bitbake.conf in OE.
(Bitbake rev: 8902c29638411d312e6fc4a197707e5742652e15)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The logging domain specified to bb.msg.fatal was invalid. Replace with
a logger.critical() call instead.
(Bitbake rev: 1ffd8737e065a3cd634c74cd67e634d785ea93a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some tweaks to use python 3 syntax in a python 2 compatible way.
(Bitbake rev: 322949c77dbaa4db01b5a43d85b39a2af67ba7b2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't close the console log file handle, python prints a warning
about unclosed file handles upon exit which is annoying.
(Bitbake rev: 624dd92952b2fc736fd86abe5f2390b87b3a7dd3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python3 cares more about invalid type comparisons. Add break statements
and better tests to make the code paths clearer and avoid type issues
in python3. No code functionality change.
(Bitbake rev: 2c39ebdd2762d027f007a6a769fdf023cdf3da2b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add browser tests for creating a project and test validation of
duplicate project names.
(Bitbake rev: 8055fbe840db426d6859ee2248f86abd44244b30)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When already existing project name is typed by user,
the ui pops up message regarding the existance of the
project name. When an existing project is typed the save
button will be disabled. Else user can proceed ahead by
modifying the project name.
[YOCTO #7005]
(Bitbake rev: 05ddf48cda6690adab4c097b16387578523e751b)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When already existing project name is typed by user,
the ui pops up message regarding the existance of the
project name.
[YOCTO #7005]
(Bitbake rev: 83e5be7e74850f1bb019668de07f3f745063fe38)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The projectNameValidation API would help users
to validate if a project name exists or not. This
API is added to libtoaster.
[YOCTO #7005]
(Bitbake rev: 3b1843553f23d78f1ddfec9f7865895ee42356a3)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We shouldn't try and use fakeworker when performing a dry_run. This
makes the core match the other fakeworker execution points.
(Bitbake rev: 49bea821a2edad5e19c3a566d1a80c23718dede9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we pass data into explode_dep_versions2(), we need to result to be
able to be processed in a deterministic way so that we end up with
consistent hash values. This means we need an ordered structure rather
than an unordered one.
To do this, return an OrderedDict() rather than a dict().
(Bitbake rev: 0737e003ca549d08a7dfe13452ae982f2e11fecd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This updates the print "" syntax to print() and fixes some exception
handling syntax such that its compatible with python v2 and v3.
(Bitbake rev: 58304fcce9727fd89564436771356c033ecd22a3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The preferred form is assertEqual, assertEquals is deprecated and
not present in python v3.
This is v2.7 safe.
(Bitbake rev: b60261bf8ade14aca31238b50c243c01adcabc59)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python deprecated logger.warn() in favour of logger.warning(). This is only
used in bitbake code so we may as well just translate everything to avoid
warnings under python 3. Its safe for python 2.7.
(Bitbake rev: 676a5f592e8507e81b8f748d58acfea7572f8796)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids a common issue where PACKAGECONFIG is emitted as a function in
bitbake -e when the 'python' flag exists. It isn't a python function unless
both 'func' and 'python' are set. This aligns with the behavior of
emit_func_python.
(Bitbake rev: c5e45063cb3ae17bbe3304ea5e712bd76e686c4a)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This lets us avoid treating the module like an object, so no globals are
needed, if one chooses to do so.
(Bitbake rev: 71bfd5beb0d0ed88c7c14bbfd5ca1a1b56122bc1)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than hardcoding .py, use python's knowledge of its file extensions.
(Bitbake rev: 09f838dbaefdaedc01a1f4818ed38280b38db744)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Imported as of oe-core 184a256.
(Bitbake rev: 99db61bf816d9c735032caa762aae8e6a0803402)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems the frozenset constructor in pypy runs len(), so we can't pass the
DataSmart instance directly to it, instead pass the iterator. Fixes pypy
support.
(Bitbake rev: b492836e08745e04bd9ba2fb0b56a680a5fdce79)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BB_ORIGENV value on the datastore can be NoneType thus raising an AttributeError
exception when calling the getVar method. To avoid this, a check is done before
accesing it.
[YOCTO #9567]
(Bitbake rev: f368f5ae64a1681873f3d81f3cb8fb38650367b0)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the noweb command we don't need to check if a socket is in use or
not as we're not starting the django development server. We're just
setting up the environment and running the runbuilds scheduler.
(Bitbake rev: f62d9a3e86e384f928fc8ad077d7cf3a75d1591e)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow binding to a specified address and port to start the django
development server on.
Remove the assumption that you want to bind to 0.0.0.0 and set the
default to localhost.
Add some additional help text after Toaster webserver has started
(Bitbake rev: ef3c88a57313947feb5ef08c4fea6fd110cde1e7)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add help text for unrecognised or missing command for toaster script
Remove assumption that no command is 'start' as the default.
(Bitbake rev: 4c0b1b9c2af70838dbcf5a676ec679f9f0c488a5)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wrapped long lines to fix "Line too long" pylint warnings.
(Bitbake rev: e329a932e14d002a561245b5026f974897f64598)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed pylint warnings:
No space allowed around keyword argument assignment
No space allowed after bracket
No space allowed before bracket
(Bitbake rev: c39770239f7b61217501782b9c5e9d3211355d42)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Environment variables BBSERVER, BBTOKEN and BBEVENTLOG silently
overwrite bitbake command line arguments. This is confusing and
can cause issues that are difficult to debug. It's better to use
them as default values instead.
Used environment variables BBSERVER, BBTOKEN and BBEVENTLOG to set
default values for command line arguments.
Changed setting default value of --ui command line argument from
BITBAKE_UI to look similar way.
(Bitbake rev: 87040be4ff54cd460961318224deef8f2ea4c85a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake uses set of environment variables to set command line
options, e.g. seeting BBTOKEN variable has the same effect
as using --token command line option.
Added new environment variables BBPRECONF and BBPOSTCONF that
are equivalents of --read and --postread command line options.
They can be used by high level scripts to append or prepend
configuration files to conf/local.conf
[YOCTO #9235]
(Bitbake rev: bf604ec1ca4eb4d0b22bcc72249963e6d7445f34)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the based on recipe has not yet been checked out/cloned we cannot
generate the custom image recipe file that uses it. So disable/remove
the option to download it.
[YOCTO #9425]
(Bitbake rev: f08651a954358e9c6ce4d69de285e4cd9e1408ae)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function returns the base recipe file path only if it currently
exists. This allows us to know whether we can proceed at this point with
generating a custom image recipe. It also enables us to call this
function from the templates to enable visual indication of this state.
Some whitespace fixes also added in generate_recipe_file_contents
(Bitbake rev: bc30d1b235b9ecacef5b2eaa851b9247d857f317)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some users may want to use authenticated SSH connections with credentials stored
in a keyring, such as gnome-keyring. These typically need a DBus session bus
connection, so pass DBUS_SESSION_BUS_ADDRESS into the fetcher environment.
To avoid the user needing to set it in their local.conf (which wouldn't be
usable) or adding it to the environment-cleansing whitelist (which would
potentially impact builds) allow the variables being passed to the fetchers to
come from the data store (first) or the original environment (second).
(Bitbake rev: 20ad1ea87712d042bd5d89ce1957793f7ff71da0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Convert existing tests to Selenium.
Add basic tests to check that the modal contains radio buttons to select
a custom image to edit when a build built multiple custom images, and
to create a new custom image from one of the images built during
the build.
[YOCTO #9123]
(Bitbake rev: c07f65feaba50b13a38635bd8149804c823d446a)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add functionality to the placeholder button on the build dashboard
to open a modal dialog displaying editable custom images, in cases
where multiple custom images were built by the build. Where there
is only one editable custom image, go direct to its edit page.
The images shown in the modal are custom recipes for the project
which were built during the build shown in the dashboard.
This also affects the new custom image dialog, as that also has
to show custom image recipes as well as image recipes built during
the build. Modify the API on the Build object to support both.
Also modify and rename the queryset_to_list template filter so that
it can deal with lists as well as querysets, as the new custom image
modal has to show a list of image recipes which is an amalgam of two
querysets.
[YOCTO #9123]
(Bitbake rev: 8c2aea3fa8e1071de60390e86e2536904fa9b7c0)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a build is viewed in the dashboard, enable users to edit
a custom image which was built during that build, and/or create
a new custom image based on one of the image recipes built during
the build.
Add methods to the Build model to enable querying for the
set of image recipes built during a build.
Add buttons to the dashboard, with the "Edit custom image"
button opening a basic modal for now. The "New custom image"
button opens the existing new custom image modal, but is modified
to show a list of images available as a base for a new custom image.
Add a new function to the new custom image modal's script which
enables multiple potential custom images to be shown as radio
buttons in the dialog (if there is more than 1). Modify existing
code to use this new function.
Add a template filter which allows the queryset of recipes for
a build to be available to client-side scripts, and from there
be used to populate the new custom image modal.
[YOCTO #9123]
(Bitbake rev: 4c49ffd28e41c4597bdac34d5e54c125571a4b95)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Selenium helper's enter_text() method doesn't cause
keyup events to trigger unless the element where text is
being entered has been clicked.
Prefix all text entry with a click() on the element to ensure
that keyup events fire.
(Bitbake rev: cea34880ad3847bd0e24c9b650eb816e1757cf2b)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Test adding a new custom image when:
1. No custom images are in the project yet.
2. User tries to add custom image which duplicates the name of
an existing custom image.
3. User tries to add custom image which duplicates the name
of a non-image recipe.
[YOCTO #9209]
(Bitbake rev: 21c1f8f8e30ef868ea6fd861eea1389f149f1049)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Project.release can be null. This causes an exception when calling
get_all_compatible_layer_versions(), as the query to fetch
the layer versions references release.branch_name.
Add a guard to the function so that an empty queryset is returned
if the release isn't set for a project.
(Bitbake rev: 6919a2b2e412a9e7b652a6bc191e7c1bed035222)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We currently prevent the same name being used for multiple custom
images, but make the check across all projects. This means that
custom image names have to be unique across all projects in
the Toaster installation.
Modify how we validate the name of a custom image so that we
only prevent duplication of custom image names within a project,
while ensuring that the name of a custom image doesn't duplicate
the name of a recipe which is not a custom image recipe.
[YOCTO #9209]
(Bitbake rev: 9abbb46e799c06757e03addd54e3f5d3c0fe2886)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the import layer page, the "Add layer" button in the layer dependencies
section doesn't accurately reflect whether the layer name in the
corresponding input can be added. A partial or empty layer name can
leave the button active, such that when it is clicked, a
previously-selected layer can be accidentally added.
Fix by keeping track of the items currently available in the typeahead,
only activating the "Add layer" button when the input matches the name
of one of those items.
[YOCTO #8511]
(Bitbake rev: dbb4f0282ded361baf9e5a0346e134bece5314b9)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When hiding a column in the build tasks or build packages included
table, if the column is set as the current order by for the table, the
order by is not reset to the default. The result is that the table
stays sorted by the hidden column.
Set the default_orderby for these two tables correctly to ensure the
corresponding table is re-sorted when a column is hidden, if that column
was being used as the order by.
[YOCTO #9011]
(Bitbake rev: b99e1012f0ad1dc82a769df15a232280c8e57b9e)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a ToasterTable is ordered by an optional column and that
column is subsequently hidden, the table ordering switches back
to the default ordering for the table. However, the table headings
don't update to reflect the new ordering. This is because the
code which sets the heading weight and hides/shows the caret symbols
only runs when the table is first loaded.
Store the default order by and re-apply it when the data is updated.
[YOCTO #9011]
(Bitbake rev: 820761e664cd2d62cc6c333a0e59580b0c4a034d)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed typo that caused incorrect processing of BBEVENTLOG
environment variable. Even if variable is set it was ignored
by bitbake.
(Bitbake rev: 2705b5f59aef4a070e2df2752d27bd04ea747057)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information about using lower-case characters and no
underscore characters when using OVERRIDES.
(Bitbake rev: 4397a023f8bf738913d71a38b3e06503207311e2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9343]
I updated the inherit directive section to note that you can
inherit multiple classes using a single line.
(Bitbake rev: 3f29ebec593f20894f7a2a0b6d50ee22474aee75)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes you can end up in a situation where you need to specify that
a specific runtime entity should be provided by a specific entry.
An example of this is bluez where you could end up in a situation where
for example:
NOTE: multiple providers are available for runtime libasound-module-bluez (bluez4, bluez5)
NOTE: consider defining a PREFERRED_PROVIDER entry to match libasound-module-bluez
NOTE: multiple providers are available for runtime bluez-hcidump (bluez-hcidump, bluez5)
NOTE: consider defining a PREFERRED_PROVIDER entry to match bluez-hcidump
The only option here is to set something like PREFERRED_PROVIDER_bluez4 = "bluez4"
which is clearly not very informative.
I've actually held off adding RPROVIDER support for a long while as this
does have sigificant potential for misuse. It doesn't for example allow
multiple runtime providers of the same name to coexist, that simply isn't
supported. It therefore doesn't replace some of the name mappings such
as busybox verses coreutils that OE-Core faces as that is a different
problem with different constraints. This mechanism is simply to provide
bitbake with a hint to decide what the dependency tree should look like.
Also, this allows us to stop printing a confusing message telling the user
to set PREFERRED_PROVIDER when the setting needed would be rather ambiguous.
[YOCTO #5044]
(Bitbake rev: 62eb39d1474d024b204634689071700605c6095c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Back in history the code did depend on previous build results. This was
bad for determinism and we no longer do that. Update comments to match
the current behaviour.
(Bitbake rev: c3fa7e561c22786d3ac57d04c367aa50f1b3b820)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We now prefix log messages coming from worker task context with the
PF and task info, however parsing messages all have to be manually
prefixed which is ugly and error prone. This change modifies the log
handler filter so this happens automatically, meaning we don't have
to change every message to include that information. This makes error
messages longer but more usable.
(Bitbake rev: 1af0ccaac81e182c4ca520037dda362d180e5605)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An invalid task causes bitbake to exit incorrectly, firing a
CommandCompleted event rather than a CommandFailed one. This
means that clients listening for CommandFailed events are
unable to detect the build failure even though one occurred.
Passing an exception string to finishAsyncCommand when a task
fails causes the CommandFailed event to be fired correctly.
[YOCTO #9087]
(Bitbake rev: 98a2c37e077b16e3bc8bb102bd18b293130d15a4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When multiple recipes which both provide something are being built, bitbake
informs us that most likely one of them provides something the other doesn't,
which is usually correct, but unfortunately it's rather painful to figure out
exactly what that is.
This patch dumps two sets of information, one is the provides information for
each recipe, filtered so only common components are removed. The other is a list
of dependees on the recipe, since sometimes this can easily identify why something
is being built.
Its not straightforward for bitbake to obtain the information but since the
warning/error code path isn't the normal one, we can afford to go through some
less than optimal processing to aid debugging.
Also provide the same information even if we're showing a warning since its still
useful.
[YOCTO #8032]
(Bitbake rev: 96fc889b8e62ba4463c71158c4b7286c48d68cd8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For a custom image, if a search for a package results in no packages
found, then additional information should be presented to the user.
This is different than a 'no results' found for a search in other
contexts, for example, a search for a package in a non-customised build.
For a custom image, a package search failure can happen because the
package was not added to the custom image. This commit presents more
information to the user, suggesting why the package was not found in the
custom image.
The generic table view handling js changes to handle a new div
element no-results-special-... such that, if present, that template
section is shown rather than the default no-results-... section.
[YOCTO #9154]
(Bitbake rev: 66b7c7ef61058b52031d71b10effcfe69afbd57b)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake variables don't include ":" characters so exclude these from the variable
expansion regexp.
This assists when parsing shell code which does A=${B:-C} as we don't want a
dependency on a variable called "B:-C".
(Bitbake rev: 14ed41a292123374d94f5c786a619881f2ddea42)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were no tests that verified the value of origvalue in the callback
routines used by edit_metadata(). This patch adds one for a simple
multiline variable.
(Bitbake rev: ece3a4d02d8162dee78c2062c10291b5fd625c36)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
edit_metadata() would corrupt a variable that was multiline, but
had the ending quotes on the same line as the last value. For example:
TEST_VAR = " foo \
bar"
would become " foo ba" because the code would always delete the last
character on the line and then do it again if the line ended in the
quote. This however doesn't show up if you have:
TEST_VAR = " foo \
bar \
"
which is how all the test cases were written.
This patch fixes that bug and adds and fixes a test that matched the bugs
behavior rather than the expected behavior.
(Bitbake rev: 14f05cbdc2ad8d59a94af1c8816567d93c39c88c)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QUnit is now included in Toaster's test suite and distributed
with its source code.
(Bitbake rev: 540c0c8d6aeec5391aa4f76614db6905afabba2c)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 81ccbf243050a5a9245d2de4c1de342771c09a59)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add set a MACHINE if needed and add a layer. When we're running in the
context of the django unit tests we don't have these defaults setup for
the project so add them.
(Bitbake rev: a0c1432f32930a17e10d50c08c2aa84a0659514b)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(Bitbake rev: 6288a3bd6678ed1c7863cfde6eb33b7c28207777)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we're using a hosted version of quint however this means that the
testing has to be online or have a cached version of quint. Add the
files to Toaster to be able to use offline.
(Bitbake rev: fc5024e2ed0e4ec2ee234a42fd0403c70c3f819e)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a column to the custom image pages that shows the reverse
dependencies in a format matching the dependencies column:
- either blank or a button showing the count of reverse dependencies,
- when the button is clicked, a popover appears showing the list
of reverse dependencies, with each package's size, and the total
size of all of the reverse dependencies.
The implementation adds a packages table method to retreive the reverse
dependency total size, and adds a separate 'popover' html template. Both
of these changes follow the pattern for the dependencies column.
[YOCTO #9163]
(Bitbake rev: 2f978dccaa1ec82c7ad350bdc1cd9500000984eb)
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have been seeing UnicodeDecodeErrors when handling the
ImagePkgList MetadataEvent in ORMWrapper's
save_target_file_information() if the event includes filenames
that include non-ASCII characters.
In the short term work around this by converting paths to the
unicode type when passing them to Django's ORM. This is a bit of
a hack but it's too late in the cycle to do anything more invasive.
[YOCTO #9142]
(Bitbake rev: f50fff03b3de02e73a3cc2eb9935f7c345dbddc4)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
buildinfohelper stores current Build object in its internal
state. Any changes to Build object will be lost if internal
state is not updated as current buildinfohelper code
saves Build object from internal state when build is
completed.
This bug causes incorrect build state when build is cancelled.
Updating internal state should fix it.
Note, that this commit updates internal state after status of
the build is changed to Build.CANCELLED. There are several other
places in the code where Build object is updated without updating
internal state. They should be carefully analyzed and fixed.
(Bitbake rev: d056cf40fc55530cb1736aedfb9a3c355884991e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When bitbake doesn't need to build anything it still sends
ImagePkgList event with empty 'pkgdata', 'imgdata' and 'filedata'
fields. This causes crash in buildinfohelper code as it's assumed
that above mentioned fields always have data keyed by build target:
ERROR: u'core-image-minimal'
Traceback (most recent call last):
File "toasterui.py", line 423, in main
buildinfohelper.store_target_package_data(event)
File "buildinfohelper.py", line 1218, in store_target_package_data
imgdata = BuildInfoHelper._get_data_from_event(event)['imgdata'][target.target]
KeyError: u'core-image-minimal'
Fixed this by using dict.get method with empty dictionary as default
return value instead of trying to get value without checking if target
key is in the data.
(Bitbake rev: c39cc463e6d9594bf2c5ac8bb74e834f6f2cf7c8)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was incorrectly assumed in the current code that bitbake is in
../bitbake/bin/ directory. It's not always the case.
Using bitbake from $BBBASEDIR should be .
(Bitbake rev: 6c9e3375d278bee712c41f07428bc82108b9aaae)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable will be used in localhost controller code
to determine correct bitbake location, so it has to be
exported.
(Bitbake rev: 429d47325aadb74d476e5b7f4738f2dfe26cde95)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified the projectconf.html to include DL_DIR and
SSTATE_DIR. Updated the script section in the html
to handle the changes made by the user on DL_DIR
and SSTATE_DIR. Included validation check for the
folder names.
[YOCTO #8422]
(Bitbake rev: bd9f8973d4c9c0722874a058466b1b911112500e)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update toaster's views.py to support DL_DIR and SSTATE_DIR for
page projectconf.html. Removed DL_DIR and SSTATE_DIR from
blacklist. Initial value of DL_DIR and SSTATE_DIR comes from
BuildEnvironment.
[YOCTO #8422]
(Bitbake rev: 9f672d7ba503d17175eef37ec03a5779e4c9f792)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If client xmlrpc token is not provided in the command line, bitbake
generates random token. Server token in --server-only mode is always
empty. This doesn't allow clients with non-empty tokens to connect
to the server. Specifying empty token should stop generation of
random token and make it possible for clients to communicate with
the server.
(Bitbake rev: b54ec2d7cb9f2fb4ff1e8af11b6ecf97d181272c)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Organise the imports into logical groups
- Fix 80 col wrapping
- Remove catch all exceptions
- Log to the toaster log
- Use QuerySet functions such as .first() and Q()
(Bitbake rev: c382f550c62437954205c7dd9c7e1891d5d03945)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add handlers to make sure we remove the BuildEnvironment LOCK when we
have cancelled a build.
(Bitbake rev: 23d0a7f9664450a09c2610631b38590a09b33744)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Elliot Smith
Ed Bartosh
Robert Yang
Paul Eggleton
Ross Burton
Michael Wood
Sujith H
Richard Purdie
Jussi Kukkonen
bavery
George McCollister
Andrew Bradford
Stephano Cetola
Ed Bartosh
Belen Barros Pena
Mariano Lopez
Peter Kjellerstedt
Markus Lehtonen
Jeremy Puhlman
Christopher Larson
Patrick Ohly
Leonardo Sandoval
Scott Rifenbark
Dave Lerner
Randy Witt
Joshua Lock