Before standard/intel/* was created in the 4.1 and 4.4 kernel trees,
some patches were merged to standard/base to add features/support for
intel platforms.
While this isn't entirely bad, there have been some compile issues
reported in some configurations. Since we don't need these commits
on standard/base, we can relocate them to make standard/base upstream
clean.
This commit removes those patches from standard/base, and restores
then to the standard/intel/* branches.
(From OE-Core rev: 2c19e6378697141992c9bd7ff2bd4d57a4f9fe9b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LINUX_VERSION was previously updated to 4.1.32, but the
SRCREVs for the actual content were missed. This gets our actual
version and the PV back in sync.
We also update the meta data to fix configuration audit warnings
from the beaglebone builds.
(From OE-Core rev: 255adfaddec0dc44db619bf8726cd7804c09400d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
squash with 4.1
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We enabled HW_RANDOM_VIRTIO for the 4.4+ kernels, but it is also needed
for 4.1 to ensure that VMs have sufficient entropy. Without this entropy
networking on qemuppc starves and triggers intermittent errors.
(From OE-Core rev: 89457aae92cf8748d8fbad2509f78f54a6b8fac1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating a series to expliclity set the quark build to 32 bits
and avoid 64 bit x86 defaults.
We also have a series of commits that fix configuration warnings on
x86 platforms:
intel-quark.cfg: Explicitly disable CONFIG_64BIT
common-pc-drivers.cfg: Remove I2O configs
features: Fix dependencies and =m vs =y discrepancies for corei7
intel-core2-32.cfg: Explicitly disable CONFIG_64BIT
features: Add 6lowpan feature and add it where necessary
(From OE-Core rev: cd20f6b1f0e20caa5c0aee0263fd9eb21c3566e9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.4 kernel to v4.4.18 and the 4.1 kernel to v4.1.30.
We also tweak the configuration with the following commits to remove
warnings being generated from the 4.4 kernel (due to options being
dropped from the final .config):
features: Create mfd-intel-lpss feature and use where appropriate
features/iio: Set IIO_BUFFER_CB to =m instead of =y
features: Add 6lowpan feature and add it where necessary
Tested on qemux86, qemuppc, qemumips and qemuarm.
(From OE-Core rev: 18c6fb387aa6a15de514030c4a7c04dac9c68869)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following configuration changes:
features: usb-net: provide more coverage on USB network devices
features: broxton: enable iTCO watchdog support
features: broxton: enable iSMT support
features: broxton: enable LPC bridge function for Intel ICH and SCH
(From OE-Core rev: 02165c6bd9da6ac3a34eabe17d3a068afb6b1727)
Signed-off-by: Bruce Ashfield <bruce@zedd.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was an issue with a netfilter backport in 4.1.28-stable. To
address it, we backport the -stable fix:
netfilter: x_tables: fix stable backport
Stable-4.1 backport of mainline commit 364723410175 ("netfilter:
x_tables: validate targets of jumps") doesn't handle correctly the fact
that 4.1 kernel is missing commit 482cfc318559 ("netfilter: xtables:
avoid percpu ruleset duplication") so that t->entries is still a per-cpu
array in find_jump_target().
Use the same fix as e.g. stable-3.14 backport.
Fixes: 8163327a3a92 ("netfilter: x_tables: validate targets of jumps")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
(From OE-Core rev: c009297d44df98ba103ee267e40ffdbc837e411f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The v4.1.28 -stable update broke the build for some ppc and mips
platforms. We fix the errors by backporting a missing commit for
ppc:
powerpc/tm: Abort syscalls in active transactions
And by reverting a commit for mips (rather than backporting more
changes to -mm):
Revert "MIPS: Reserve nosave data for hibernation"
(From OE-Core rev: 02a1d6eb52b78c7fdcfe2a64e427488e6dd9ce4d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following two commits:
44af90071620 4.1.28 Fix bad backport of 8f182270dfec "mm/swap.c: flush lru pvecs on compound page arrival"
99c37e1500a6 i2c: ismt: Add Intel DNV PCI ID
And the following two meta-data changes:
afbc6bd00e6f bsp/axxiaarm64: Enable Axxia NCR and PEI drivers
6a2047c00450 common-pc: enforce 32 bit
(From OE-Core rev: d52e523b28cc95a741039018d76fa4c1a947a40f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.1 kernel to the korg -stable release
(From OE-Core rev: 3d888fa7b27865b5fc1b6ee5e138692847648f40)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following commits to tweak the default configuration
for powerclamp and gpio:
features/thermal: make INTEL_POWERCLAMP driver built as module
gpio: disable Intel PMIC gpio
(From OE-Core rev: b5541c3db22fbe8b4e0389b5937cbb5ae0284f00)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following mainline changes to the 4.1 and 4.4
kernels:
device property: Avoid potential dereferences of invalid pointers
device property: convert to use match_string() helper
lib/string: introduce match_string() helper
device property: fix for a case of use-after-free
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
xhci: harden xhci_find_next_ext_cap against device removal
xhci: rework xhci extended capability list parsing functions
xhci: parse xhci protocol speed ID list for usb 3.1 usage
extcon: Redefine the unique id of supported external connectors without 'enum extcon' type
extcon: Remove optional print_name() function pointer of extcon_dev
extcon: Update the prototype of extcon_register_notifier() with enum extcon
extcon: Use capital letter for the name of external connectors
extcon: Use the unique id for external connector instead of string
extcon: Remove the optional name of extcon device
extcon: adc-jack: Remove the unneeded num_cables field
extcon: Alter MHL-TA cable name to TA cable name
extcon: Unify the dock device names on max8997/77693
extcon: Unify the jig cable names on rt8973 and max14577/77693/77843
extcon: Fix the checkpatch warning and minor coding style issue
extcon: Add extcon_get_edev_name() API to get the extcon device name
extcon: Modify the device name as extcon[X] for sysfs
extcon: Add manufactor name of each extcon device
And the following config change:
mei.cfg: Add CONFIG_INTEL_MEI_TXE=m
(From OE-Core rev: a04c634adc3d073701ecf2576fe9dd0cf8ace629)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the 4.1 and 4.4 kernels with mainlin backports for platform/feature
support.
Also updating the kernel meta data to configure and use those new features.
(From OE-Core rev: d33f1ccd8ddf8eeaf262267d8618f2422adda629)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following two configuration changes:
Author: Rebecca Chang Swee Fun <rebecca.swee.fun.chang@intel.com>
Date: Mon Jun 27 15:11:04 2016 +0800
broxton: set CONFIG_GPIO_GENERIC_PLATFORM instead of CONFIG_GPIO_GENERIC
CONFIG_GPIO_GENERIC option is tristate, this will ensure we
enable by selecting CONFIG_GPIO_GENERIC_PLATFORM.
This addresses the following message:
Value requested for CONFIG_GPIO_GENERIC not in final ".config"
Requested value: "CONFIG_GPIO_GENERIC=y"
Actual value set: ""
Signed-off-by: Rebecca Chang Swee Fun <rebecca.swee.fun.chang@intel.com>
Author: California Sullivan <california.l.sullivan@intel.com>
Date: Mon Jun 27 17:15:53 2016 -0700
features/input: Add keyboard-gpio feature
This feature adds keyboard-gpio support to the kernel. We also add a
specific implementation by default. More can be added as necessary.
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From OE-Core rev: 358fa56efa2db2a5276a910676e2e6093fe2da0f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
From Tom:
This is a small patchset for yocto-4.4 that removes open-coded VFAT_FS
and enables defaults that should be enabled along with it.
(From OE-Core rev: 0eb474575a96a525755c1d679015af49d7667283)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting mainline and development commits to for various subystems.
linux-yocto: 4.4:
ae6a527d93f i2c: add support for ACPI reconfigure notifications
f2422e12af53 acpi: add support for ACPI reconfiguration notifiers
bc87718fdb56 acpi: fix enumeration (visited) flags for bus rescans
linux-yocto: 4.1:
9f166e918f63 platform:x86 decouple telemetry driver from the optional IPC resources
adfc21c1f156 tpm: update PPI documentation to address the location change.
661b0190e412 x86 tsc: enumerate BXT tsc_khz via CPUID
78be69fa9d15 x86 tsc: enumerate SKL cpu_khz and tsc_khz via CPUID
(From OE-Core rev: fdde7061108f04b04a82ba76205ce85afc543a6f)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Yu, Ong Hock <ong.hock.yu@intel.com>
Signed-off-by: Yong, Jonathan <jonathan.yong@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following pstate changes:
fb0153332a1f intel_pstate: Add SKY-S support
7eb5c7e382a8 intel_pstate: enable HWP per CPU
d73ee41f9786 x86/mm: Decouple <linux/vmalloc.h> from <asm/io.h>
f447e3d661f7 intel_pstate: Force setting target pstate when required
7db69b864737 intel_pstate: change some inconsistent debug information
367ff9c73d83 intel_pstate: Add tsc collection and keep previous target pstate
(From OE-Core rev: acd05ec90cfa4c43b24904117e69c805892e2544)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following changes from the mainline kernel for improved
power, driver core and mmc support:
x86 tsc_msr: Remove irqoff around MSR-based TSC enumeration
x86 tsc_msr: Add Airmont reference clock values
x86 tsc_msr: Correct Silvermont reference clock values
x86 tsc_msr: Update comments, expand definitions
x86 tsc_msr: Remove debugging messages
x86 tsc_msr: Identify Intel-specific code
mmc: block: Pause re-tuning while switched to the RPMB partition
mmc: block: Always switch back to main area after RPMB access
mmc: core: Add a facility to "pause" re-tuning
mmc: block: Add new ioctl to send multi commands
cpuidle: powernv/pseries: Auto-promotion of snooze to deeper idle state
cpuidle: Do not use CPUIDLE_DRIVER_STATE_START in cpuidle.c
cpuidle: Select a different state on tick_broadcast_enter() failures
sched / idle: Call default_idle_call() from cpuidle_enter_state()
sched / idle: Call idle_set_state() from cpuidle_enter_state()
cpuidle: Fix the kerneldoc comment for cpuidle_enter_state()
sched / idle: Eliminate the "reflect" check from cpuidle_idle_call()
cpuidle: Check the sign of index in cpuidle_reflect()
sched / idle: Move the default idle call code to a separate function
powercap / RAPL: Add support for Broadwell-H
module: add extra argument for parse_params() callback
Driver core: wakeup the parent device before trying probe
base:dd - Fix for typo in comment to function driver_deferred_probe_trigger().
(From OE-Core rev: 10c7d7747ec4e97d1770cc8e40883da25c37a709)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following mainline support for enhanced/improved support
on BXT based platforms.
spi: pxa2xx: Fix too early chipselect deassert
spi: pxa2xx: Update comment in int_transfer_complete()
spi: pxa2xx: Print actual DMA/PIO transfer mode in debug messages
spi: atmel: remove warning when !CONFIG_PM_SLEEP
spi: fix kernel-doc warnings in spi.h
spi: expose spi_master and spi_device statistics via sysfs
spi: meson: Fix module autoload for OF platform driver
spi: bcm2835: BUG: fix wrong use of PAGE_MASK
spi: bcm2835: fix overflow in calculation of transfer time
spi: bcm2835: bcm2835_dma_release() can be static
spi: bcm2835: fix kbuild compile warnings/errors and a typo
spi: bcm2835: enable dma modes for transfers meeting certain conditions
spi: bcm2835: fallback to interrupt for polling timeouts exceeding 2 jiffies
spi: spi-pxa2xx: Remove unused legacy null dma buffer and allocation for it
mfd: intel-lpss: Save register context on suspend
mfd: intel-lpss: Pass I2C configuration via properties on BXT
perf/x86: Fix time_shift in perf_event_mmap_page
perf/x86: Improve accuracy of perf/sched clock
ALSA: hda - Move send_cmd / get_response to hdac_bus_ops
ALSA: hda - Merge codec and controller helpers
ALSA: hda - moved alloc/free stream pages function to controller library
ALSA: hda - Add DSP loader to core library code
ALSA: hda - Add the controller helper codes to hda-core module
ALSA: hda - Handle error from get_response bus ops directly
Revert "ALSA: hda - fix number of devices query on hotplug"
(From OE-Core rev: 1ee07350eac47f389d6ef769c054d0ab2c258dd4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following changes from the mainline kernel to enhance/add
support for tpm2, pinctrl, powercap and watchdog:
634eecdb20b watchdog: omap_wdt: fix null pointer dereference
79dcc6dabe63 Watchdog: Fix parent of watchdog_devices
94a2e8f1d47e watchdog: st_wdt: Update IP layout information to include Clocksource
3a74938a9610 watchdog: st_wdt: Add new driver for ST's LPC Watchdog
fb6b94faa82c watchdog: digicolor: driver for Conexant Digicolor CX92755 SoC
22fb7b1353dd watchdog: omap_wdt: early_enable module parameter
aa70c2480483 watchdog: omap_wdt: implement get_timeleft
47b7a1a5f70f watchdog: docs: omap_wdt also understands nowayout
9d833b82f706 watchdog: omap: put struct watchdog_device into driver data
87ded7189286 watchdog: omap: use watchdog_init_timeout instead of open coding it
abccc104fcad watchdog: da9062: DA9062 watchdog driver
95f8b1024989 pinctrl: intel: fix offset calculation issue of register PAD_OWN
8e6606474fa0 pinctrl: intel: fix bug of register offset calculation
2423468cb317 MAINTAINERS: add new maintainer for TPM DEVICE DRIVER
cf94113f05a6 sysfs: added __compat_only_sysfs_link_entry_to_kobj()
cdb63d5cd801 tpm: fix missing migratable flag in sealing functionality for TPM2
95f738feaafe keys, trusted: seal/unseal with TPM 2.0 chips
92eb9052fd50 tpm: seal/unseal for TPM 2.0
d9c7bb89ec85 keys, trusted: move struct trusted_key_options to trusted-type.h
a3b394e91b31 tpm: introduce tpm_buf
bd68d3a21139 tpm: move the PPI attributes to character device directory.
54fb01659b83 tpm, tpm_crb: fix unaligned read of the command buffer address
0ab522f5ef11 powercap / RAPL: disable the 2nd power limit properly
9ba8c36e9ea7 thermal/powerclamp: remove cpu whitelist
2971561c8fc9 thermal/powerclamp: add cpu id for Skylake u/y
cec457da34d0 thermal/powerclamp: add cpu id for denlow platform
fc30ea2abdc5 thermal/powerclamp: add cpu id for skylake h/s
3eea18356747 intel powerclamp: support Knights Landing
(From OE-Core rev: ecb1fa6ed2366a031ba374d16d4ccbbd8b7fc7e6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches backport the upstream changes for powerclamp to support APL APU.
Dasaratharaman Chandramouli (1):
intel powerclamp: support Knights Landing
Jacob Pan (2):
thermal/powerclamp: add cpu id for denlow platform
thermal/powerclamp: remove cpu whitelist
Radivoje Jovanovic (2):
thermal/powerclamp: add cpu id for skylake h/s
thermal/powerclamp: add cpu id for Skylake u/y
(From OE-Core rev: 39207d4b5d2829a8811c182bedc2b1adb718e9d2)
Signed-off-by: Yu, Ong Hock <ong.hock.yu@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting mainline patches to add always running timer support (ART).
The main advantage of ART is that ART can be captured
simultaneous to the capture of audio and network device clocks,
allowing a correlation between timebases to be constructed.
Arnd Bergmann (1):
ntp/pps: replace getnstime_raw_and_real with 64-bit version
Christopher S. Hall (4):
time: Add cycles to nanoseconds translation
time: Add timekeeping snapshot code capturing system time and counter
time: Add driver cross timestamp interface for higher precision time synchronization
x86/tsc: Always Running Timer (ART) correlated clocksource
DengChao (1):
timekeeping: Provide internal function __ktime_get_real_seconds
(From OE-Core rev: c38faba29a2d76e8b12f80f7529918388f4e2170)
Signed-off-by: Yong, Jonathan <jonathan.yong@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating upstream changes for intel_idle to support BXT CPU.
Dasaratharaman Chandramouli (1):
intel_idle: Support for Intel Xeon Phi Processor x200 Product Family
Len Brown (4):
intel_idle: Skylake Client Support
intel_idle: Skylake Client Support - updated
intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled
intel_idle: add BXT support
(From OE-Core rev: 92c3d9c71718ff4f4d9ec40a90be2f99a64bec66)
Signed-off-by: Yu, Ong Hock <ong.hock.yu@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the 4.1.25 and 4.1.26 stable releases.
(From OE-Core rev: 298a3c38ac99282554b51bdc0abec2423b6ce694)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following commits for BXT and other device support:
b4acdc6d1ea9 serial: 8250_dw: Do not use readl/writel before checking port iotype
c439afb78cda serial: 8250_dw: Add support for big-endian MMIO accesses
9227cc288f7e serial: 8250_dw: Avoid serial_outx code duplicate with new dw8250_check_lcr()
9d608cf2b4c5 serial: 8250_dw: don't set UPF_BOOT_AUTOCONF flag
db4e65b3a854 serial: 8250_dw: cleanup dw8250_setup_port
f4885484ee87 serial: 8250_dw: cleanup dw8250_idma_filter
0912b12e5df0 serial: 8250_dw: rename and comment the fallback dma filter
3436bb74c86b serial: 8250_dw: proper support for UARTs without busy functionality
fac8ac4a8074 serial: 8250_dw: add dw8250_quirks function
0bba963bdd94 serial: 8250_dw: only setup the port from one place
d01850ea5471 serial: 8250_dw: hook the DMA in one place
585f11e24199 serial: 8250_dw: adapt to unified device property interface
df44bc6d8b61 serial: 8250_dw: add separate pointer for the uart_port to dw8250_probe
84e9183637e7 serial: 8250_dw: allow lower reference frequencies
70ce481f5678 serial:8250_dw: do not alter CTS and DCTS since AFE is enabled
739968950dc4 serial: 8250: Auto CTS control by HW if AFE enabled
074cdf88d099 serial: 8250_dw: support ACPI platforms with integrated DMA engine
0bb15fc79c22 serial: 8250_dma: no need to sync RX buffer
45082f48e5c6 dmaengine: idma: rename to INTEL_IDMA64
1f4c5fb48460 mmc: sdhci-acpi: Set MMC_CAP_AGGRESSIVE_PM for Broxton controllers
6963cc8f6e2e mmc: sdhci-pci: Set MMC_CAP_AGGRESSIVE_PM for Broxton controllers
aab588165ee4 mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers
c51e080a85ac mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL
fbbad4798f9c mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
ce6717f7195e mmc: sdhci: Allow override of get_cd() called from sdhci_request()
abceeaf8efc8 mmc: sdhci: Allow override of mmc host operations
279c8ddf6b6d mmc: sdhci: make max-frequency property in device tree work
6e9d3ad3a003 mtd: spi-nor: add support for w25q128fw
(From OE-Core rev: 8d11341b23d4f8867b1d829adb8a30556c3a5d54)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Importing i2c dtsi support from linux-omap. This enables the
busses for future development and application support.
(From OE-Core rev: 8933893886569f9bbfc4ba7b2678f8c7c6aec611)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We had a partial musb change merged into the 4.1 tree, which resulted in:
| kernel-source/drivers/usb/musb/musb_dsps.c:
In function 'dsps_create_musb_pdev':
| kernel-source/drivers/usb/musb/musb_dsps.c:750:8:
error: 'struct musb_hdrc_config' has no member named 'maximum_speed'
| config->maximum_speed = usb_get_maximum_speed(&parent->dev);
| ^~
By backporting commit:
9b7537642cb6a [usb: musb: set the controller speed based on the config setting]
We get our missing structure field, and we can once again build musb.
[YOCTO: #9680]
(From OE-Core rev: b746223787a0195c3a4d16523003c62ec0ac8451)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reverting the change that moved common-pc* to the intel staging
branches. This means that genericx86, qemux86*, etc, will continue
to use standard/base.
(From OE-Core rev: e3aa87a5d3a7cbe6f2c835273991a388101b0cde)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To provide timely support for Intel platforms, without risking
issues with other platforms, we create intel branches from the
common variants.
i.e. We now have standard/intel, which is from standard/base
These branches will be managed like any other in the tree, and
will get common -stable, -rt, bugs and CVE updates.
(From OE-Core rev: 5bc0ce92545b8940a90d96912e46d6320b3a015e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping to the v4.1.24 -stable release, and backporting a ppc
gcc6 fix from the 4.4 kernel.
(From OE-Core rev: aee5a879032df0c1642f17408b70a33d06df972a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* just like linux-yocto-dev is doing
* fixes following errors in world builds:
ERROR: Nothing PROVIDES 'linux-yocto-rt' (but /home/jenkins/oe/world/shr-core/openembedded-core/meta/recipes-rt/images/core-image-rt-sdk.bb DEPENDS on or otherwise requires it)
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: Required build target 'core-image-rt-sdk' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-rt-sdk', 'linux-yocto-rt']
ERROR: Nothing PROVIDES 'linux-yocto-rt' (but /home/jenkins/oe/world/shr-core/openembedded-core/meta/recipes-rt/images/core-image-rt.bb DEPENDS on or otherwise requires it)
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: linux-yocto-rt was skipped: PREFERRED_PROVIDER_virtual/kernel set to linux-yocto, not linux-yocto-rt
ERROR: Required build target 'core-image-rt' has no buildable providers.
Missing or unbuildable dependency chain was: ['core-image-rt', 'linux-yocto-rt']
(From OE-Core rev: 048c901fc32a1fd9a6c4b6f68f618101dfdf94ad)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the better late than never category, this commit integrates the
ltsi content into linux-yocto 4.1. We we already matching LTSI on
the kernel version front with a small gap in patches. With this
commit, we have a "ltsi" branch that is pure ltsi on the mailine
kernel, and then that commit is merged into standard/base (to
make it available to all BSPs).
(From OE-Core rev: 7071ab47ce566398b398ac3d24eb3620a0353897)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following commit to have a more informative error
message:
uvesafb: print error message when task timeout occurs
The driver waits for response from user space for a pending
task until a timeout (UVESAFB_TIMEOUT) occurs. But the
existing error message in later steps is a little obscure.
This patch throws out an error message when timeout happens.
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
(From OE-Core rev: 1c6ba3c57eae77adb9ae5c0a60e3a9174ef398b6)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merging the following two commits:
ab0d998117cc ktypes/tiny/tiny.cfg: support /proc/sys
349e9ce59f7b features: enable pinctrl driver for Broxton
(From OE-Core rev: 2f719dc523439a73dd203e6f922a7b3ccaddbee1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
enabling AHCI runtime PM support via the following commits:
f5b08e95bc03 ahci: Add runtime PM support for the host controller
e05e05973f39 ahci: Add functions to manage runtime PM of AHCI ports
558571930e2d ahci: Convert driver to use modern PM hooks
4a2c2074f209 ahci: Cache host controller version
21641413456c scsi: Drop runtime PM usage count after host is added
254ab69f652d scsi: Set request queue runtime PM status back to active on resume
61c02cb167ed block: Add blk_set_runtime_active()
7bcfbac98f3c ahci: Store irq number in struct ahci_host_priv
a5a093b7f6e4 ahci: Move interrupt enablement code to a separate function
(From OE-Core rev: 83a7fca3f07487cdb367c63ede177f059ff1a021)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following mainline changes:
afaf425e796c pwm: Add the pwm_is_enabled() helper
023721c3d067 pwm: atmel: Fix incorrect CDTY value after disabling
cd9fe8adb313 pwm: atmel: Fix incorrect CDTY value after enabling
3f445ca6df1f pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
9a51f622bdc9 pwm: lpss: Select core part automatically
8ee11b6f80ba pwm: lpss: Update PWM setting for Broxton
148228a52c2d pwm: lpss: Remove ->free() callback
e20d95bcd0b3 pwm: lpss: Add support for runtime PM
b2248acf6f8b pwm: lpss: Add more Intel Broxton IDs
85e8566bd241 pwm: lpss: Support all four PWMs on Intel Broxton
1bcdcb6275bf pwm: lpss: Add support for multiple PWMs
(From OE-Core rev: e721858657b8641fda94f84866c37668580bd7a9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backporting the following commits:
2b0cc0f0ca23 mmc: It is not an error for the card to be removed while suspended
67903c1f4c77 mmc: sdhci: 64-bit DMA actually has 4-byte alignment
4e434f483381 mmc: sdhci: Do not BUG on invalid vdd
05be442eb234 mmc: mmc: Fix incorrect use of driver strength switching HS200 and HS400
97a5f396dca6 mmc: core: Make runtime resume default behavior for MMC/SD
b6ee1ac07f14 mmc: mmc: Improve reliability of mmc_select_hs400()
45de48ce0b3c mmc: mmc: Move mmc_switch_status()
9d6aaaa0f6b7 mmc: mmc: Fix HS setting in mmc_select_hs400()
d7795de930c5 mmc: mmc: Improve reliability of mmc_select_hs200()
ac98e33a088d mmc: sdhci-acpi: Add more ACPI HIDs for Intel controllers
87f52cce8123 mmc: sdhci-pci: Add more PCI IDs for Intel controllers
cf3a4d2d4c7d mmc: sdhci-pci: Add another PCI ID for an Intel eMMC host controller
b3ef45585504 mmc: sdhci-pci: Build o2micro support in the same module
b32a4e71f49d mmc: sdhci: enable tuning for DDR50
f8e213bee1e1 mmc: sdhci: call sdhci_init() before request irq
ece0925eb94e mmc: sdhci-pci: Enable HS400 for some Intel host controllers
1c01bcdceaf6 mmc: sdhci-pci: Add support for drive strength selection for SPT
c1d6e92915a9 mmc: sdhci: Add a callback to select drive strength
40deb3ac3331 mmc: mmc: Add driver strength selection
e7d602f5992f mmc: mmc: Read card's valid driver strength mask
bc193a886571 mmc: core: Record card drive strength
a548d3993cc8 mmc: core: Factor out common code in drive strength selection
6713f5cf3164 mmc: core: Add 'card' to drive strength selection callback
852e6bd69b77 mmc: core: Simplify card drive strength mask
0bb40266bbb9 mmc: core: Allow card drive strength to be different to host
940d30f1a212 mmc: core: Reset driver type to default
efbc6ba8cd27 mmc: cast u8 to unsigned long long to avoid unexpected error
bafe0e5beba9 mmc: core: Don't print reset warning if reset is not supported
5b2789151852 mmc: block: Retry errored data requests when re-tuning is needed
d14211a4b2fe mmc: block: Check re-tuning in the recovery path
1ff15c648159 mmc: core: Flag re-tuning is needed on CRC errors
12544ee1cdbb mmc: sdhci: Change to new way of doing re-tuning
995073b182f7 mmc: core: Add support for HS400 re-tuning
53a0d731e824 mmc: core: Separate out the mmc_switch status check so it can be re-used
d3f59f108bf7 mmc: mmc: Hold re-tuning in mmc_sleep()
465db9504a27 mmc: core: Hold re-tuning while bkops ongoing
60cacf85ee10 mmc: core: Hold re-tuning during erase commands
5bd43535f4c1 mmc: core: Hold re-tuning during switch commands
4baa45ff8d15 mmc: core: Add support for re-tuning before each request
cd2ca27f9282 mmc: core: Enable / disable re-tuning
65723236b746 mmc: host: Add facility to support re-tuning
(From OE-Core rev: 934fd9d7310ffc72e206f48590a0f10ba0a78e1b)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To enable Apollo Lake/Broxton, we backport the following changes:
da451824f75f i2c: designware: Convert to use unified device property API
58b1b5365f4a i2c: designware: Do not require clock when SSCN and FFCN are provided
8995091cfa0f i2c: designware: retry transfer on transient failure
1fc62907f84e i2c: designware: Move common probe code into i2c_dw_probe()
678110c0f2b8 i2c: designware: Rename platform driver probe and PM functions
c51c2e104d40 i2c: designware: Make dw_readl() and dw_writel() static
98d2b6e244ad i2c: designware: Remove unused functions
3d04c6e99652 i2c: designware: Disable interrupts before requesting PCI device interrupt
fb5b7be0fbe7 i2c: designware: Remove interrupt clearing from i2c_dw_pci_probe()
d48fd08b11c8 i2c: designware: Make debug print in i2c_dw_isr() shorter
28f94bc07450 i2c: designware-pci: use IRQF_COND_SUSPEND flag 95f494846fc1 i2c: designware: Avoid unnecessary resuming during system suspend
fb2ae3705a3a i2c: dw: Add APM X-Gene ACPI I2C device support
516a0fc91e00 i2c: designware: Add support for AMD Seattle I2C
874d63b3c95c i2c: designware: fix IO timeout issue for AMD controller
47543e80c6dd i2c: designware: reverts "i2c: designware: Add support for AMD I2C controller"
076fe383c4b5 i2c: designware: use to_pci_dev()
(From OE-Core rev: 7b4b8a2481ce256e35fb86ebdeb944ee29ad5231)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Integrating the following 4.4 backports:
630b726098c9 mfd: make mfd_remove_devices() iterate in reverse order
aab24907568b driver core: Do not overwrite secondary fwnode with NULL if it is set
89775462ef50 device property: return -EINVAL when property isn't found in ACPI
a9eebae4a2c0 device property: check fwnode type in to_of_node()
(From OE-Core rev: 4dd3bd968042d943f279d91d220abc61ebd574a5)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>